Professional Documents
Culture Documents
CM2 en
CM2 en
CM2 en
COWON
COWON CM2
Quick Guide
COWON CM2 2
+ Before you start _ Names of Parts and Functions
Multi-Function Button LED Charging Port (L) Charging Port (R) Micro USB Port
Power / Call / Pairing
Play / Previous · Next Track
COWON CM2 3
+ Before you start _ Charging
×2 ×3 ×4
Red Red Red Blue Off Red Red Red Red On
* Please charge the charging cradle periodically. When the cradle battery is discharged, the earphone units may turn-on instead of being charged, causing the
earphone to be discharged.
*C heck the battery level by pressing the [Battery Level Check Button] on the cradle.
COWON CM2 4
+ Using the Product _ Power On / Off
Auto Manual
00:03 00:03
COWON CM2 5
+ Using the Product _ Pairing & Connection
Dual Mode : The CM2’s left and right earphones can be used together in stereo.
① ② ③ ④
CM2 Bluetooth L
L R
* After the initial pairing, the CM2 and your smartphone will connect automatically when the CM2 is on and Bluetooth is enabled on your phone.
COWON CM2 6
+ Using the Product _ Pairing & Connection
Single Mode : The CM2’s left and right earphones can be used individually in mono.
a) Pair the CM2 in Dual Mode as previously shown.
b) Proceed steps ①~④.
c) You can now turn on and use only the desired unit.
① ② ③ ④
L R L R
00:05
CM2 Bluetooth R
Press and hold the button on the right earphone for 5 seconds
Turn off both the left and right to enter pairing mode for only the right earphone. (Even if you Pair the detected right earphone(CM2
earphones. have heard the “Power On” voice, please continue to press Bluetooth R) to your smartphone.
until you hear “Pairing Mode”.)
COWON CM2 7
+ Using the Product _ Reset to Dual Mode (When the L and R units are not connecting to each other)
Refer to page 'Pairing & Connection' when connecting the product to a smart device for the first time.
If the L and R units only connect in single mode during normal dual mode operation, reset to dual mode by following the instructions
below. If it fails to reset, start again from Step ②.
① ② ③ ④ ⑤
00:03 00:03 L R L R
Off Off
00:10 00:10
CM2 Bluetooth L
Off
Delete connected device Hold for 10 seconds Press and release when
Power Off Connection
& Turn off Bluetooth and release the LED turns blue
Turn on Bluetooth on
Press and release both left
Delete the [CM2 Blue- Press and hold the your smartphone or other
and right buttons when
tooth] device registered on Remove the earphones left and right buttons Bluetooth device and
the LED turns blue. Once
your smartphone or other from the cradle and turn simultaneously for 10 select [CM2 Bluetooth L]
reset, the L unit will enter
Bluetooth device and turn off both L and R units. seconds. Then release from the detected devices
pairing mode, and its LED
off Bluetooth. them. to complete pairing and
will flash red and blue.
automatically connect.
COWON CM2 8
+ Using the Product _ Listening to Music · Calling
00:01
×1 ×2 ×3
Listening to Music Play · Pause Voice Recognition Next Track Previous Track
* Press and hold the multifunction button for 1 second to launch the voice * In Dual Mode, L unit connects to your smartphone.
recognition feature of your smartphone or tablet. (Android OS : Google *B y using the CM2 in Single Mode, you can alternate between charging the
Assistant / iOS : Siri / Window OS : Cortana - Except during calls) left and right earphones for extended use. (Audio books, Podcasts, etc.)
*S ince Single Mode uses only one earphone, you can stay aware of
* When using Dual Mode, the sound can be heard from both left and environmental sounds and use the device more safely when walking or
rightearphones during calls. Mic only operates on left earphone. So make bicycling.
sure to put the left earphone near your mouth during calls in a loud
environment. *K eep the product and a mobile phone within 1 meter when pairing.
* If passkey input is required, enter a password or a PIN No.‘0000’.
* In Single Mode, each earphone will output sound with both microphones
enabled for use. *W hen the CM2 is off, press and hold the multifunction button for 5 seconds
to enter pairing mode.
*W hen powered on, the earphones will automatically connect to the most
recently connected devices.
COWON CM2 9
+ Voice Prompts · Status LED + Specification
Status Voice Prompts LED Bluetooth Version V5.0
CM2 : 4.1g x 2
Weight
Disconnected Charging Cradle : 27g
Blue
* Number of available CM2 charges using charging cradle (450mAh) : 3 times
* For iPhone, user ringtone will be applied. (with fully charged charging cradle)
COWON CM2 10