Professional Documents
Culture Documents
Huawei Switching Power Supply Eps200-4850a
Huawei Switching Power Supply Eps200-4850a
Mapping
Table 2-25 describes the mapping between the EPS200-4850A AC power chassis and
USG9500 chassis.
Appearance
Figure 2-24 and Figure 2-25 show the AC power chassis.
In V500R005C20SPC300 and later versions, you can connect the DB9 interface on the
rear side of the AC power chassis to the power management interface of the device
using monitoring cables in the auxiliary material package. As such, the device can
monitor the AC power chassis.
Dormant (when
the device is in
dormant state,
the protection
Indicator Color Normal Abnormal Cause
indicator of the
module is on
but the module
does not report
alarms.)
Fault indicator Red Off On No output due
to the over-
voltage output
power-off, fan
fault, over-
temperature
power-off, or
internal module
fault.
Technical Specifications
Table 2-27 lists the technical specifications of the AC power chassis.
Rated input voltage • 220 V rated voltage: 200 V AC to 240 V AC, 50/60
range Hz
• 110 V rated voltage: 100 V AC to 120 V AC, 50/60
Hz
Item Technical Specification
Input current • 220 V rated voltage: 18.5 A per module (Each
power supply input with at least 18.5 A current is
recommended.)
• 110 V rated voltage: 16 A per module (Each power
supply input with at least 16 A current is
recommended.)
Number of power 4
outputs
Maximum output current • 220 V rated input voltage: 52.3 A/single module
• 110 V rated input voltage: 20 A/single module
Maximum output power • 220 V rated input voltage: 2800 W/single module
• 110 V rated input voltage: 1070 W/single module