Professional Documents
Culture Documents
Engmanualetecnicobagni1 2018
Engmanualetecnicobagni1 2018
BATHROOM
TECHNICAL MANUAL
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
MELAMINE-COATED
Melamine coated with high quality resin • CARCASSES
CUSTOMISED COLOURS
ARE NOT FEASIBLE
01/2018 0.3
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
LASERMAT
Nanotechnological matt “soft touch” FENIX NTM® surface - Edge in polypropylene, applied with Laser technique • FRONT PANELS
• PANELS
• TOPS
* The colour Alaska white Lasermat 177, in some light conditions, tends to reveal the red pigment inside the colour • BACK PANELS
formulation, causing chromatic changes. This characteristic cannot be considered cause for a compliant.
** The colour Kos white Lasermat 183 is recommended for matches with white Corian® 173 / white Silcover 003
/ Arctic white Ecolak 510.
CUSTOMISED COLOURS
ARE NOT FEASIBLE
The external decorative surface is obtained starting from thermosetting last generation resins that, thanks
to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional
point of view.
The internal structural layer is obtained through the thermo-lamination of kraft papers, soaked in thermosetting
resin.
0.4 01/2018
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
SILCOVER
Matt lacquered, fine textured • FRONT PANELS
• PANELS
• BACK PANELS
* The colour white Silcover 003 is recommended for matches with white Corian® 173 / Kos white Lasermat 183 /
Arctic white Ecolak 510 / white Polyester 003.
** The extra charge has to be applied to the price of cabinets, SILCOVER category. Please consider a 4 weeks
time increase for supply of goods. Fluorescent or metalized colours are not feasible.
Price increase for
CUSTOMISED COLOURS **
Attention!
Price increases start from a minimum value of € 200,00 (net dealer value, VAT excl.). Custom colour requests with
+10% RAL or NCS colours
price increases of lesser amounts are considered equal to the € 200.00 minimum charge.
+18% AS PER SAMPLE
colours
01/2018 0.5
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
ECOLAK
Water-based matt “Soft touch” lacquer • FRONT PANELS
• PANELS
• BACK PANELS
* The colour Arctic white Ecolak 510 is recommended for matches with white Corian® 173 / Kos white Lasermat
183 / white Silcover 003 / white Polyester 003.
CUSTOMISED COLOURS
ARE NOT FEASIBLE
027
Black
0.6 01/2018
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
VENEER WOOD
* Finished with water-based paint. • FRONT PANELS
• PANELS
** Finished with acrylic-based paint. • BACK PANELS
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials
(Abonos Oak excluded).
ABONOS OAK: fossil oak wood found in river basins, result of thousands of years of underwater conservation
(1000-5000 BC), which gives the wood several properties including hardness and giving it distinct light to dark SPECIAL OR
CUSTOMISED SPECIES
colour tones, unique grains that enhance the wood rarity and the special design.
ARE NOT FEASIBLE
Attention!
Doors and panels have vertical grain, except for specific cases indicated on relative product pages.
NEW
01/2018 0.7
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
POLYESTER
Polyester hi gloss lacquer • FRONT PANELS
• PANELS
* The colour white Polyester 003 is recommended for matches with white Corian® 173 / Kos white Lasermat 183
/ white Silcover 003 / Arctic white Ecolak 510.
** The extra charge has to be applied to the price of cabinets, POLYESTER category. Please consider a 4 weeks
time increase for supply of goods. Fluorescent or metalized colours are not feasible.
CUSTOMISED COLOURS
ARE NOT FEASIBLE
001
Andalusian red
0.8 01/2018
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
METALS
Metal-effect lacquer • FRONT PANELS
• PANELS
Attention!
Metals is a special finishing which reproduces the typical effect of metallic surfaces, rendered through a very pre-
cise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the
alternation of manual and mechanical processes, by the quality of the chromium particles-enriched acrylic paints
and by the complex drying procedure.
The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession CUSTOMISED COLOURS
ARE NOT FEASIBLE
of multi-directional brushing of the surface make each piece a unique and exclusive one. The above mentioned
characteristics shall not be considered cause of complaint.
191
Lead
ALUMINIUM
Anodised aluminium sheet • FRONT PANELS
• PANELS
• FRONT PANELS (ON FRAME AMX)
* Brushed finish.
** Micro-sandblasted finish.
CUSTOMISED COLOURS
ARE NOT FEASIBLE
382 381
Steel * Dark **
01/2018 0.9
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
WOOD 3D
Veneer wood, slats effect, alternating thickness 20 /23 mm • FRONT PANELS
• PANELS
* Finished with water-based paint.
048 100
Core walnut * Black eco-wood **
0.10 01/2018
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
SOLID WOOD
Solid wood layers, with support made of strip wood • FRONT PANELS
• PANELS
* Front panels and panels: finished with vegetable oils. / Tops: finished with water-based paints. • TOPS
** Finished with special painting cycles, that don’t change the “old” aspect of the wood.
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
Attention! SPECIAL OR
Doors and panels have vertical grain, except for specific cases indicated on relative product pages. CUSTOMISED SPECIES
The solid Canaletto LIGHT walnut with “sawn effect“ may have parts with lighter grain alternating the dark one. ARE NOT FEASIBLE
The “old“ grey pinewood 057 consists of pinewood solid boards recycled from renovation of old houses, barns and
huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old”
aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product.
Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign
of times and bad weather; therefore they show deformations and wrinkles strength.
Tops obtained with old wooden boards offer a clear example of the wood vitality and instability.
For this reasons each piece in solid wood has to be considered “unique“ and different from all the other ones.
The above mentioned characteristics shall not be considered cause of complaint.
SOLID WOOD 3D
Slats, alternating thickness 20 / 23 mm - Solid wood layers, with support made of • FRONT PANELS
strip wood • PANELS
Boffi uses only wood from not primary forests, to guarantee an adequate restoration
3D
of the renewable raw materials.
SPECIAL OR
CUSTOMISED SPECIES
Attention!
ARE NOT FEASIBLE
Doors and panels have vertical grain, except for specific cases indicated on relative product pages.
The solid Canaletto LIGHT walnut with “sawn effect“ may have parts with lighter grain alternating the dark one.
For this reasons each piece in solid wood has to be considered “unique“ and different from all the other ones.
The above mentioned characteristics shall not be considered cause of complaint.
058
Canaletto LIGHT walnut
“sawn-effect“ *
01/2018 0.11
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
GLASS
Tempered glass FROSTED • FRONT PANELS
• TOPS
• BACK PANELS
Attention! • FRONT PANELS (ON FRAME AMX)
Please consider that glasses with same colours but different thickness (e.g.: door 4 mm / top 12 mm) have always
different tones. Colour of possible replacements or completions, may not match exactly the original one.
CUSTOMISED COLOURS
ARE NOT FEASIBLE
GLASS
Tempered glass SANDED • TOPS WITH MOULDED WASHBASIN
Attention!
Please consider that glasses with same colours but different thickness (e.g.: door 4 mm / top 12 mm) have always
different tones. Colour of possible replacements or completions, may not match exactly the original one.
CUSTOMISED COLOURS
ARE NOT FEASIBLE
0.12 01/2018
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
CRISTALPLANT®
Aluminium tri-hydrate with polyester / acrylic resins and pigments • TOPS
• WASHBASINS
• BATHTUBS
CUSTOMISED COLOURS
ARE NOT FEASIBLE
-
White
CORIAN®
Aluminium tri-hydrate with acrylic resins and pigments • FRONT PANELS
• PANELS
• TOPS
• WASHBASINS
• BATHTUBS
CUSTOMISED COLOURS
ARE NOT FEASIBLE
173
White
01/2018 0.13
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
CERAMILUX®
Natural mineral charges with polyester resin, covered by a polyester acrylate film • WASHBASINS
• BATHTUBS
CUSTOMISED COLOURS
ARE NOT FEASIBLE
- -
Matt white Polished white
PAPERSTONE®
100% eco-friendly matt material, made of recycled paper, resins not derived from petroleum and natural colours • CONTENITORI DUEC
CUSTOMISED COLOURS
ARE NOT FEASIBLE
080
Black
0.14 01/2018
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
CUSTOMISED COLOURS
ARE NOT FEASIBLE
NEW
01/2018 0.15
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
COMPOSITE SILESTONE®
Compound made up of natural quartz, polymers and pigments. Matt finish • TOPS
• BACK PANELS
• WASHBASINS
CUSTOMISED COLOURS
ARE NOT FEASIBLE
440
Doradus black
0.16 01/2018
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
COMPOSITE DEKTON®
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized • TOPS
Particle Technology and ultra-compaction process. • BACK PANELS
CUSTOMISED COLOURS
ARE NOT FEASIBLE
01/2018 0.17
C o l o u r s - W o o d s p e c i e s
1) For a correct evaluation of finishes and colours it is necessary to use physical samples. The wood, solid wood, stone, marble and granite samples are purely indicative: these materials
may present some natural and unavoidable changes in tone and grain compared to the original samples.
2) Different materials and finishes when compared, even if produced with the same colour (e.g. white) may present some unavoidable tone differences.
3) All finished parts may change tone and colour with time, due to light effect and to the natural aging process and to any factor which may be present into the environment: therefore
possible replacements may have some differences if compared to the original finishes.
DE CASTELLI METALS
Exclusive-appearance metal sheet obtained with special chemical and / or mechanical treatments • FRONT PANELS (ON FRAME AMX)
Attention!
*Doors and panels are vertically striped, except for specific cases indicated on relative product pages.
CUSTOMISED COLOURS
ARE NOT FEASIBLE
NEW NEW
NEW
0.18 01/2018
P r i c e r a n g e
FURNITURE
Some cabinets, for technical reasons, may have restrictions and/or price relationships different from what indicated on this chart.
FURNITURE
LASERMAT Nanotechnological matt “soft touch” FENIX NTM® LASERMAT colour range
surface - Edge in polypropylene, applied with
Laser technique
WOOD Veneer wood Oak / Ash-grey oak / Grey-graphite oak / Larch wood, As-
pen white / Larch wood, Orion black / Black Eco-wood
WOOD SELECTION Veneer wood Core walnut / Canaletto walnut U.S. / Smoked oak
GLASS Tempered glass (on frame AMX) Frosted painted Extralight White / Dove grey / Coffee
SOLID WOOD Solid wood (even surface) Canaletto LIGHT walnut “sawn-effect“ / Old grey pinewood
SOLID WOOD 3D Solid wood (planks, alternating thickness 20 / 23 mm) Canaletto LIGHT walnut “sawn-effect“
DE CASTELLI A Metal sheet (on frame AMX) Délabré iron B / Striped Maistral stainless steel 7022
DE CASTELLI B Metal sheet (on frame AMX) Délabré brass / Striped delabrè brass / Délabré copper /
Orbitale délabré cop
STONE A Marble, stone, granite (on frame AMX) Marble White Carrara
+
STONE D Marble, stone, granite (su cornice AMX) Granite Black Cosmic / Marble Emperador Dark
01/2018 0.19
P r i c e r a n g e
TOPS
Some worktops, for technical reasons, may have restrictions and/or price relationships different from what indicated on this chart.
TOPS
LASERMAT Nanotechnological matt “soft touch” FENIX NTM® LASERMAT colour range
surface - Edge in polypropylene, applied with
Laser technique
GLASS Glass tempered Frosted painted Extralight White / Dove grey / Coffee
Sanded painted Extralight White / Dove grey / Coffee
STONE A Marble, stone, granite, composite Marble White Carrara / Stone Serena
STONE B Marble, stone, granite, composite Stone Cardoso / Stone Matraia / Granite Black absolute
Zimbabwe
STONE D Marble, stone, granite, composite Granite Black Cosmic / Marble Emperador Dark
Silestone® Zeus white / Silestone® Lagoon white /
Silestone® Yukon white / Silestone® Kensho grey /
Silestone® Unsui brown / Silestone® Merope grey-brown
/ Silestone® Doradus black
Dekton® Edora beige / Dekton® Kadum brown / Dekton®
Sirius black
STONE E Marble, stone, granite, composite Marble Grey Stone / Quartzite Calacatta
Dekton® Zenith white / Dekton® Irok beige / Dekton®
Strato grey / Dekton® Ventus grey / Dekton® Korus grey /
Dekton® Galema brown / Dekton® Galema brown
+
SOLID WOOD Solid wood Canaletto LIGHT walnut “sawn-effect“ / Old grey pinewood
0.20 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
CARCASSES / HARDWARE
• It’s made of 19 mm thick wood particle board panels, waterproof (class V100 - In compliance
with EN317 standards), with low formaldehyde emission (class E1 - In compliance with
EN717+EN 120 / CARB P2 standards), treated with high performance melamine resin.
Front and back edges in ABS, same colour.
• Back panel made of 3,5 mm thick MDF Medium Density fibres board, treated with high
performance melamine resin, in same finish as carcass. Each carcass is fitted with a soft
close system (Blumotion): the device is integrated in the hinge on hinged doors and in the
glide on drawers. In some specific cases, the Blumotion device is installed on the carcass
(instead of hinge/glide).
• Side panels are connected in the back through longitudinal beams in black anodised
aluminium.
• All drillings holes for shelving are filled with galvanised metal bushes.
• Hardware, when used, is made of anti-oxidation treated nickel-plated metal.
• The nominal carcass width has a ± 1 mm allowance.
• Shelves brackets in stainless steel, equipped with a special blocking device (C / D).
• ATTENTION ! - To avoid any breakage, please move the shelves using ONLY
the screwdriver. DO NOT use the cordless drill or other tools.
COLOURS / SPECIES: 130 Silk white (C) - 608 Grey-graphite oak (D) / 606 Elm wood. C D
• The visible side panels of all compositions of PROGRAMMA STANDARD and SIMPLE ARE
FINISHED, WITHOUT AN EXTRA CHARGE (please note that front panels in Corian®
have finished side panels in white Ecolak and front panels in Wood 3D have finished side
panels in wood veneer - without 3D effect).
• The finished side panel includes the finishing of the frontal vertical edge too (Lasermat
excluded - the edge remains in melamine).
• ATTENTION!!! - The finished side panel IS NOT FEASIBLE in SOLID WOOD
and 3D SOLID WOOD: for these finishes please order the end panels separately.
FINISHED CARCASSES
E
I FIUMI ST
• SILCOVER: MDF “medium density“ fibres, 19 mm thick, matt fine textured lacquered (E).
• LEGNO: MDF “medium density” fibres, 19 mm thick, veneered with 0,6 mm thick wood
veneer; 1 mm thick wood edge.
• 45° front and upper edges.
MELAMINE-COATED CARCASSES
F G
TREVES
• It’s made of 14 mm thick wood particle board panels, waterproof (class V100), with low
formaldehyde emission (class E1 / CARB P2), treated with high performance melamine
resin. Front and back edges in ABS, same colour. The panels are assembled using the
45° folding technique.
• Back panels are made of MDF “medium density“ panels - 3,5 mm thick - melamine-coated
in thermo-treated larch finish.
• Exclusive hinge Design Boffi in black anodised aluminium (G). 180° opening. Visible
external part, integrated in door thickness (14 mm). Hinge settings are the traditional ones.
• Finish WHITE + THERMO-TREATED LARCH WOOD: external part and edges in white
melamine, internal part and shelves in melamine thermo-treated larch (F).
01/2018 0.21
G e n e r a l t e c h n i c a l i n f o r m a t i o n
CARCASSES / HARDWARE
FINISHED CARCASSES
H I
PIANURA
• Produced with MDF medium density fibres, 19 / 22 mm thick, matt lacquered Silcover or
veneered with wood sheet. (H).
• Totally concealed adjustable hinge in printed die cast alloy, 180° opening. Covered by
black plastic (I).
0.22 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
CARCASSES / HARDWARE
HINGES
P
• 1,2mm thick hinges made of moulded steel sheet, black onyx finish, with special spring
breaking device, adjustment in height, depth and width. Opening angle 95° (P). The hinge
board is a die cast alloy safely attached to the side panel.
• Every hinge has a Blumotion soft close system (excluded those cases where a special
installation is required).
• Drawer front panel, bottom, side and back panels made of 16 mm thick multi-layer wood
structure, veneered with very thick sheets, edges in wood.
• Front panels and sides assembled with finger joint technique (T).
• Push opening system TIP-ON.
• Soft closing device.
• Glides are in galvanized steel and run on stabilized carriages. Total extraction.
• Capacity: 40 kg.
• Customised sizes are not feasible.
• Compatible internal accessories: DOMESTICI - ONDA.
DRAWER ACCESSORIES
U V
DOMESTICI (U)
ONDA (V)
01/2018 0.23
G e n e r a l t e c h n i c a l i n f o r m a t i o n
DOORS / FRONT PANELS
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials
and technical construction of the door/front panels.
type AH
type AH
type AH
23
type AH
0.24 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
DOORS / FRONT PANELS
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials
and technical construction of the door/front panels.
23
type AH
type AH
type AH
CORIAN®
1
1. Inner and outer face, edges made of white Corian®, thickness 4 mm.
2. MDF medium density fibres panel with honeycomb structure.
1
Colours: White. 2
23
type AH
01/2018 0.25
G e n e r a l t e c h n i c a l i n f o r m a t i o n
DOORS / FRONT PANELS
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials
and technical construction of the door/front panels.
ATTENTION! 2
- Boffi 3D door has been designed to create a specific three dimensions effect: therefore 1
thicknesses and widths vary on purpose in a specific untidy way.
- Possible small cracks on upper and lower edge may not be used as a cause for a complaint,
because they are an integral part of the product itself and are due to the use of end-grain
(cut perpendicularly) wood which gives a natural aspect to the door. 23
These characteristics shall not be considered cause of complaint.
type BM
Species: Core walnut / Black Ecowood.
HANDLE: compatible ONLY with 3D and X3D handles, with a price increase
(see page 0.34). Feasible for: PROGRAMMA STANDARD - SIMPLE - FREE ZONE
type AH
1. Brushed solid wood layer, treated with 2 steps of natural oil or oil-based paints and vegetal 1 1 1
waxes. Vertical grain. Horizontal “sawn-effect” (only on species clearly indicated).
ATTENTION! 1 1
- Possible small cracks on upper and lower edge may not be used as a cause for a complaint,
because they are an integral part of the product itself and are due to the use of end-grain 1
(cut perpendicularly) wood which gives a natural aspect to the door. 1
These characteristics shall not be considered cause of complaint.
HANDLE: compatible ONLY with external handles or with X3L handle, with 23 23
a price increase (see page 0.34). Abete “antico“ Altre essenze
grigio
Species: Canaletto LIGHT walnut “sawn-effect“ / “Old“ grey pinewood. type AH
ATTENTION!
- Boffi 3D door has been designed to create a specific three dimensions effect: therefore
thicknesses and widths of solid wood vary on purpose in a specific untidy way. Upper
doors (wall units) and lower doors (base units) may present slats mis-alignments.
- Solid wood, with time, may present, very naturally, small cracks not pertaining to the
product’s quality.
These characteristics shall not be considered cause of complaint.
HANDLE: compatible ONLY with X3D handle, with a price increase (see
page 0.34).
Feasible for: PROGRAMMA STANDARD - SIMPLE - FREE ZONE
0.26 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n NEW
DOORS / FRONT PANELS
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials
and technical construction of the door/front panels.
FREE ZONE
GLASS
1. Structure made of polystyrene (multi-layer wood only on doors for electrical appliances
and other specific cases).
2
12
2. Frame AMX in black anodised aluminium profile.
3. Rear covering in FENIX NTM® (nanotech material).
4. Tempered glass, bevelled on inner and outer edges. 1 4
3
4
Colours:
Glass > Extra-light frosted painted White / Dove grey / Coffee. 20
Framework > black.
type TE
GLAS
ALUMINIUM
1. Structure made of polystyrene (multi-layer wood only on doors for electrical appliances
and other specific cases).
2. Frame AMX in black anodised aluminium profile. 2
3. Rear covering in FENIX NTM® (nanotech material). 12
4. Anodised aluminium sheet.
1 4
Colours: 3
Aluminium > Steel / Dark. 3
Framework > black.
19
type TE
ALLUMINIO
DE CASTELLI A / B - METAL
1. Structure made of polystyrene (multi-layer wood only on doors for electrical appliances
and other specific cases).
2. Frame AMX in black anodised aluminium profile. 2
3. Rear covering in FENIX NTM® (nanotech material). 12
4. Treated metal sheet.
1 4
Colours: 3
De Castelli metal: Délabré iron B, striped Maistral stainless steel 7022, Délabré brass, 1,5
striped Délabré brass, Délabré copper, orbitale Délabré copper. 18
Framework > black.
type TE
DE CASTELLI A / B
1. Structure made of polystyrene (multi-layer wood only on doors for electrical appliances
and other specific cases).
2. Frame AMX in black anodised aluminium profile.
2
3. Rear covering in FENIX NTM® (nanotech material). 12
4. Stone / marble / granite sheet, matt finish, waterproof treated.
1 4
Typologies: Carrara white marble / Cardoso stone / Absolute black Zimbabwe granite / 3
Quartzite Silver / Emperador Dark marble / granito Black Cosmic / Marble Grey Stone / 7
Quartzite Calacatta.
Framework > black.
23
type TE
STONE - MARBLE - GRANITE
01/2018 0.27
G e n e r a l t e c h n i c a l i n f o r m a t i o n
DOORS / FRONT PANELS
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials
and technical construction of the door/front panels.
type BN
WOOD
WOOD SELECTION
WOOD EXCLUSIVE
CORIAN®
2
30°
1. Inner and outer face made of white Corian® panel thickness 4 mm.
2. Angled edge 30° made of solid Corian® thickness 19 mm.
3. Honeycomb panel with solid pinewood frame.
3
Colours: White. 1
23
type BN
CORIAN®
0.28 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
DOORS / FRONT PANELS
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials
and technical construction of the door/front panels.
Typologies: Carrara white marble / Cardoso stone / Absolute black Zimbabwe granite /
16 7
Emperador Dark marble / Quartzite Silver / Marble Grey Stone / Quartzite Calacatta.
23
Support typologies: Grey-graphite oak with black edge / Silk white with white edge / Elm
wood with elm wood edge.
type CV
STONE - MARBLE - GRANITE
SOHO
GLASS
3
1. Wood particle board panel, 16 mm thick, waterproof (class V100), with low formaldehyde
emission (class E1 / CARB P2). 4
2. Treated with high performance melamine resin. 2
3. ABS edge thickness 1 mm. 1
4. EXTRA-LIGHT frosted glass, varnished, tempered, thickness 5 mm. Bevelled on inner and
outer edges.
16 5
ATTENTION! Please consider that glasses with same colours but different thickness (ex:
door 5 mm / top 12 mm) have always different tones. Colour of possible replacements or
completions, may not match exactly the original one.
Colours: type AV
Glass > Extra-light frosted painted White / Dove grey / Coffee.
Support > Black.
Feasible for: SOHO
ALUMINIUM
3
1. Wood particle board panel, 16 mm thick, waterproof (class V100), with low formaldehyde
emission (class E1 / CARB P2). 4
2. Treated with high performance melamine resin. 2
3. ABS edge thickness 1 mm. 1
4. 3 mm. thick anodised aluminium sheet, STEEL (brushed finish) or DARK (micro-sandblasted
finish).
16 3
Colours:
Aluminium > Steel / Dark.
Support > Black.
type AV
01/2018 0.29
G e n e r a l t e c h n i c a l i n f o r m a t i o n
DOORS / FRONT PANELS
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials
and technical construction of the door/front panels.
I FIUMI ST
0.30 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
DOORS / FRONT PANELS
1) The thicknesses indicated in the following technical sections are nominal and may slightly differ from the true measurement: this fact is due to the inevitable tolerances of the materials
and technical construction of the door/front panels.
WOOD-IN
NEW
Feasible for: WOOD IN (with front panels assembled “WITHOUT FINGER JOINT TECHNIQUE”)
1. Wood particle board panel, waterproof (class V100), with low formaldehyde emission (class
E1 / CARB P2) or in MDF medium density fibres board.
2. Wood veneer 0,6 mm thick, painted in 2 steps with acrylic or water based matt paints 2
(bottom layer + finish layer). Vertical grain. 2
3. Wood edge 1 mm thick. 1
WOOD SELECTION / WOOD EXCLUSIVE – Veneer wood assembled with finger joint 3
technique.
Species Wood Selection: ONLY Oak with knots (available only for Wood-in) / Canaletto 16 16
walnut U.S.
Species Wood Exclusive: Abonos oak.
Feasible for: WOOD IN (with front panels assembled “WITH FINGER JOINT TECHNIQUE”)
01/2018 0.31
G e n e r a l t e c h n i c a l i n f o r m a t i o n
STANDARD HANDLES
No extra charge.
1) Please always specify on the order handles’ position: without info Boffi will consider standard position.
2) When using wide external handles on hinged door, please always check possible opening interferences.
3) With drawers, heavy-duty drawers and pull out, handles position is always centred on the door panel.
Colours:
chrome – white polished – black polished.
236
Compatible cabinets:
Programma STANDARD.
39
40
= 224 = 30
Compatible cabinets:
Programma STANDARD.
220 / 370 / 520 / 820 / 1120 8 17
“b” horizontal
11
8 left or right
16
128/224/381/531/831 40
220
25
35 35
0.32 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
HANDLES WITH EXTRA CHARGE
Please add the price increase cod. JZMW01 to each door or front panel, see page 17.8.
1) Please always specify on the order handles’ position: without info Boffi will consider standard position.
2) When using wide external handles on hinged door, please always check possible opening interferences.
3) With drawers, heavy-duty drawers and pull out, handles position is always centred on the door panel.
Compatible cabinets:
Programma STANDARD.
20
Compatible finishes:
Lasermat - Silcover - Ecolak - Wood
20 25 - Wood Selection - Polyester - Metals -
Corian® - Wood Exclusive - Solid wood
NEW 200 (“old” grey pinewood excluded).
Compatible cabinets:
Programma STANDARD.
Compatible finishes:
Silcover - Ecolak - Wood - Wood Selection
- Polyester - Corian® - Wood Exclusive.
Compatible cabinets:
25 Programma STANDARD.
Compatible finishes:
Silcover - Ecolak - Wood - Wood Selection
23 - Polyester - Corian® - Wood Exclusive.
WOOD
WOOD SELECTION
WOOD EXCLUSIVE
Compatible cabinets:
27
Programma STANDARD.
50
Compatible finishes:
23
01/2018 0.33
G e n e r a l t e c h n i c a l i n f o r m a t i o n
HANDLES WITH EXTRA CHARGE
Please add the price increase cod. JZMW01 to each door or front panel, see page 17.8.
1) Please always specify on the order handles’ position: without info Boffi will consider standard position.
2) When using wide external handles on hinged door, please always check possible opening interferences.
3) With drawers, heavy-duty drawers and pull out, handles position is always centred on the door panel.
Compatible cabinets:
Programma STANDARD
23 / 20
Left hinged door Drawers – Pull-out doors Right hinged door
25 Compatible cabinets:
Programma STANDARD
23 / 20
Left hinged door Drawers – Pull-out doors Right hinged door
23
Horizontal left Horizontal centred Horizontal right
146 75 = 146 = 75 146
0.34 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
HANDLES WITH EXTRA CHARGE
Please add the price increase cod. JZMW01 to each door or front panel, see page 17.8.
1) Please always specify on the order handles’ position: without info Boffi will consider standard position.
2) When using wide external handles on hinged door, please always check possible opening interferences.
3) With drawers, heavy-duty drawers and pull out, handles position is always centred on the door panel.
DUEMILAOTTO Position A - Horizontal centred Obtained with a special cut out on door
thickness. Not compatible with tall unit
= 180 / 364 = - Width 364 mm only for Silcover, Ecolak, single door.
25 25 white Polyester, Corian® finishes.
Sizes: 180 - 364 mm.
180 / 364
Compatible cabinets:
Programma STANDARD.
POLYESTER:
Position B – Horizontal left or right Available ONLY in colour white
- Only handle W. 180 mm. cod.003. It is made with a special solid
- Only on hinged door. piece of Corian® inserted into the door
thickness and then cut out. Therefore the
“cut out” part is always white Corian®
180 and different from all the rest of the door
(polyester).
- Width 180 mm, positions A - B.
- Width 364 mm, only position A.
CORIAN®:
- Width 180 mm, positions A - B.
- Width 364 mm, only position A.
ATTENTION!
Not feasible in the finishes or species
not indicated here above.
Compatible cabinets:
224 / 381/ 531 / 831 / 1131 Horizontal left or right Programma STANDARD.
40
Compatible finishes:
27,5 Lasermat / Silcover / Ecolak / Wood / Wood
Selection / Metals / Polyester / Corian® /
Solid wood / Wood Exclusive.
NEW
ATTENTION!!!
Compatible ONLY with pull-out or
Examples NOT compatible with hinged door hinged doors (except for the cases
450 600 here indicated).
406 556
01/2018 0.35
G e n e r a l t e c h n i c a l i n f o r m a t i o n
CHART FOR HANDLES COMPATIBILITY
Legno massello 3D
Legno Exclusive
Legno Selection
Legno massello
Legno 3D
Poliestere
Lasermat
Corian®
Silcover
Ecolak
Metals
Legno
Handle O O O O O O O O O O
T Line O O O O O O O O O O
Zone O O O O O O O O O O
X12 O O O O O O O
Universal O O O O O O O
Aprile O O O O O O O O O
3D O
X3D O O
3
X3L O
1 2
Duemilaotto O O O O O O
Yard O O O O O O O O O O
0.36 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
TOPS
B - Glass / Thickness: 12 mm
B
Extra-light tempered glass, painted and frosted. Edges bevelled and satin.
Attention! The WOOD-IN top is optional: the cabinet with Boffi TOP-MOUNTED washbasins can be installed
without any top.
D - Cristalplant® / Thickness: 15 mm
D
Solid surface made of natural mineral charges (ATH, aluminium tri-hydrate) and low percentage of polyester and pure acrylic
polymers. Inert, hypoallergenic and non-toxic. 100% recyclable, waterproof (class 1), UV-resistant, a compact, nonporous, hygienic
and pleasant to touch material.
• Colours: White.
• Max. length: 2900 mm.
• Compatible cabinets: Programma STANDARD - SIMPLE - SOHO - FREE ZONE - WOOD-IN.
Attention! The WOOD-IN top is optional: the cabinet with Boffi TOP-MOUNTED washbasins can be installed
without any top.
E - Corian® / Thickness: 20 mm
E
Non-porous, compact solid surface made of acrylic resin (1/3: polymethylmethacrylate or PMMA) and natural mineral charges
(aluminium tri-hydrate (ATH), a by-product of Bauxite process for aluminium extraction).
Structure in compounded aluminium.
• Colours: White.
• Max. length: 3650 mm.
• Compatible cabinets: Programma STANDARD - SIMPLE - FREE ZONE.
01/2018 0.37
G e n e r a l t e c h n i c a l i n f o r m a t i o n
TOPS
• Typologies: Carrara white marble - Serena stone - Matraia stone - Cardoso stone - absolute black Zimbabwe granite - quartzite
Silver - Black Cosmic granite - Emperador Dark marble - Grey Stone marble - quartzite Calacatta.
• Max. length 2500 mm: Serena stone - Cardoso stone.
• Max. length 2600 mm: Grey Stone marble.
• Max. length 2800 mm: Matraia stone - Emperador Dark marble.
• Max. length 2900 mm: quartzite Calacatta.
• Max. length 3050 mm: Carrara white marble - absolute black Zimbabwe granite - Black Cosmic granite - quartzite Silver.
• Compatible cabinets: Programma STANDARD - SIMPLE - SOHO - FREE ZONE - WOOD-IN.
Attention! The WOOD-IN top is optional: the cabinet with Boffi TOP-MOUNTED washbasins can be installed
without any top.
Attention! The WOOD-IN top is optional: the cabinet with Boffi TOP-MOUNTED washbasins can be installed
without any top.
Attention! The WOOD-IN top is optional: the cabinet with Boffi TOP-MOUNTED washbasins can be installed
without any top.
NEW
0.38 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
TOPS
XILA BATH
• Colours: White.
• Max. length: 2900 mm.
• Typologies: Carrara white marble - Serena stone - Matraia stone - Cardoso stone - absolute black Zimbabwe granite - quartzite
Silver - Black Cosmic granite - Emperador Dark marble - Grey Stone marble - quartzite Calacatta.
• Max. length 2500 mm: Serena stone - Cardoso stone.
• Max. length 2600 mm: Grey Stone marble.
• Max. length 2800 mm: Matraia stone - Emperador Dark marble.
• Max. length 2900 mm: quartzite Calacatta.
• Max. length 3050 mm: Carrara white marble - absolute black Zimbabwe granite - Black Cosmic granite - quartzite Silver.
01/2018 0.39
G e n e r a l t e c h n i c a l i n f o r m a t i o n
TOPS
B14
O - Cristalplant® / Thickness: 50 mm
O
The top consists of 15 mm thick sheets with bevelled edges. The lateral bevelled edges should be ordered separately, according to
the project. Solid surface made of natural mineral charges (aluminium tri-hydrate, ATH) and low percentage of polyester and pure
acrylic polymers. Inert, hypoallergenic and non-toxic. 100% recyclable, waterproof (class 1), UV-resistant, a compact, non-porous,
hygienic and pleasant to touch material.
• Colours: White.
• Max. length: 2900 mm.
• Typologies: Carrara white marble - Serena stone - Matraia stone - Cardoso stone - absolute black Zimbabwe granite - quartzite
Silver - Black Cosmic granite - Emperador Dark marble - Grey Stone marble - quartzite Calacatta.
• Max. length 2500 mm: Serena stone - Cardoso stone.
• Max. length 2600 mm: Grey Stone marble.
• Max. length 2800 mm: Matraia stone - Emperador Dark marble.
• Max. length 2900 mm: quartzite Calacatta.
• Max. length 3050 mm: Carrara white marble - absolute black Zimbabwe granite - Black Cosmic granite - quartzite Silver.
0.40 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
TOPS
I FIUMI ST
S - Cristalplant® / Thickness: 20 mm
S
Top with 45° lower bevelled edges on 3 sides perfectly matched with upper 45° edges of I FIUMI ST cabinets. Therefore, the cabinet
edges cover the top thickness.
Solid surface made of natural mineral charges (aluminium tri-hydrate, ATH) and low percentage of polyester and pure acrylic
polymers. Inert, hypoallergenic and non-toxic. 100% recyclable, waterproof (class 1), UV-resistant, a compact, non-porous, hygienic
and pleasant to touch material.
• Colours: White.
• Max. length: 2300 mm.
T - Corian® / Thickness: 20 mm
T
Top with 45° lower bevelled edges on 3 sides perfectly matched with upper 45° edges of I FIUMI ST cabinets. Therefore, the cabinet
edges cover the top thickness.
Non-porous, compact solid surface made of acrylic resin (1/3: polymethylmethacrylate or PMMA) and natural mineral charges
(aluminium tri-hydrate ATH, a by-product of Bauxite process for aluminium extraction).
• Colours: White.
• Max. length: 3000 mm.
• Typologies: Carrara white marble - Serena stone - Matraia stone - Cardoso stone - absolute black Zimbabwe granite - quartzite
Silver - Black Cosmic granite - Emperador Dark marble - Grey Stone marble - quartzite Calacatta.
• Max. length 2500 mm: Serena stone - Cardoso stone.
• Max. length 2600 mm: Grey Stone marble.
• Max. length 2800 mm: Matraia stone - Emperador Dark marble.
• Max. length 2900 mm: quartzite Calacatta.
• Max. length 3050 mm: Carrara white marble - absolute black Zimbabwe granite - Black Cosmic granite - quartzite Silver.
01/2018 0.41
G e n e r a l t e c h n i c a l i n f o r m a t i o n
TOPS
ATTENZIONE !!! - Il piano WOOD-IN è opzionale: è possibile allestire il mobile con lavabi SOPRAPIANO da
appoggio della gamma Boffi senza l’utilizzo del piano.
• Typologies: Carrara white marble - Cardoso stone - absolute black Zimbabwe granite - quartzite Silver -Emperador Dark marble
- Grey Stone marble - quartzite Calacatta.
• Fixed sizes: CUSTOMISATIONS NOT AVAILABLE (see TOPS chapter).
ATTENZIONE !!! - Il piano WOOD-IN è opzionale: è possibile allestire il mobile con lavabi SOPRAPIANO da
appoggio della gamma Boffi senza l’utilizzo del piano.
• Colours: White.
• Fixed sizes: CUSTOMISATIONS NOT AVAILABLE (see TOPS chapter).
0.42 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
SUSPENDED TOPS
PIANURA
FLYER
Cristalplant® - Corian® - Solid wood - Marble, stone, granite, composite / Thickness: 100 mm
Suspended top, thickness 100 mm and depth 500 / 600mm, to be fitted with supporting brackets (to be ordered
separately).
These tops can be fitted with lower covering panel too.
Please see other technical details on page 15.8.
• Solid Wood species: natural oak (with knots) / Canaletto LIGHT walnut “sawn-effect“ / old grey pinewood.
• Max. length: 3000 mm (old grey pinewood: 2800 mm).
01/2018 0.43
G e n e r a l t e c h n i c a l i n f o r m a t i o n
MAINTENANCE - USE
Boffi suggests the use of the Boffi Clean Set (cod. AVBL029) and of the specific cleaning products indicated on the price list (see page 17.10).
As a general advice, if Clean Set Boffi is not available, please do not use products that might scratch, such as abrasive powders and chemicals, solvents or strong acids.
Please do not forget that steam and humidity must be considered risk factors for material durability: we recommend wiping always very well all surfaces after cleaning.
Any oil stains must be cleaned away immediately.
MELAMINE-COATED SURFACES Clean with dry cloth and multipurpose A b r a s i v e p ro d u c t s a n d p ro d u c t s Attention: Do not clean edges using
cream (Boffi Clean Set) or the Casa 9, containing chlorine. products containing thinners or acetone.
Multipurpose cleaner by Nuncas. For
in-depth cleaning, add a degreaser de-
tergent to water, as Casa 9 Strong Floor
Degreaser by Nuncas. If these specific
products are not available, please use a
moist cloth for daily cleaning and a neutral
detergent for in-depth cleaning.
Dry well with soft or microfiber cloth.
SURFACES IN LASERMAT Clean with dry cloth and Multipurpose Abrasive detergents, alkaline or products Lasermat is highly scratch, steam, water,
cleaner by Nuncas, or the specific de- containing chlorine or turpentine. stain, impact and abrasion resistant.
tergent included in the cleaning kit for Dust spray and furniture wax as these Do not wipe with strongly abrasive
Lasermat (cod. AVBL025). could change the matt finish. products.
For in-depth cleaning, add a degreaser
detergent to water, as Casa 9 Strong Floor
Degreaser by Nuncas. If these specific
products are not available, please use a
moist cloth for daily cleaning and a neutral
detergent for in-depth cleaning.
Dry well with soft or microfiber cloth.
SURFACES IN SILCOVER AND Clean with dry cloth and the Casa 9, Abrasive detergents and creams. When cleaning a new bathroom you may
ECOLAK Multipurpose cleaner by Nuncas. Dust spray and furniture wax as these find colour residue on the cloth. This is
For in-depth cleaning, add a neutral could change the matt finish. normal and due to particles of paint that
detergent to water, as Winto Parquet by in the drying process rise to the surface.
Nuncas. Dry well with soft or microfiber Please remove these particles cleaning
cloth. If these specific products are not the surface with a sponge and a neutral
available, please use a dry cloth for daily detergent as Winto Parquet by Nuncas.
cleaning and a generic window cleaning
agent, insisting in case of possible stains.
SURFACES IN POLYESTER Clean with dry cloth and multipurpose Abrasive detergents and creams. If the polyester should dull it is possible
cream (Boffi Clean Set) or the Casa 9, Dust spray and furniture wax as these to buff the surface with car polish applied
Multipurpose cleaner by Nuncas. For in- could stain and leave haloes on surface. using a soft, non-abrasive cloth.
depth cleaning add a neutral detergent
to water, as Winto Parquet by Nuncas.
Dry well with soft or microfiber cloth. If
these specific products are not available,
please use a dry cloth for daily cleaning
and a generic window cleaning agent,
insisting in case of possible stains.
0.44 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
MAINTENANCE - USE
SURFACES LACQUERED IN Clean with dry cloth and multipurpose Abrasive detergents and creams. Use extreme caution not to scratch the
METALS cream (Boffi Clean Set) or the Casa 9, Dust spray and furniture wax as these surface. Do not use abrasive products.
Multipurpose cleaner by Nuncas. For in- could stain and leave haloes on surface.
depth cleaning, add a neutral detergent
to water, as Winto Parquet by Nuncas.
Dry well with soft or microfibre cloth. If
these specific products are not available,
please use a dry cloth for daily cleaning
and a generic window cleaning agent,
insisting in case of possible stains.
SURFACES IN WOOD/ WOOD Clean with dry cloth and multipurpose Products containing acetone, chlorine or Paints used for wooden surfaces are
SELECTION / WOOD EXCLUSIVE cream (Boffi Clean Set) or the Casa 9, diluents, powders or abrasive products. hydro repellent and anti-yellowing.
(VENEER) Multipurpose cleaner by Nuncas. Strong alkaline detergents. Avoid scratching and exposure to high
For in-depth cleaning, add a neutral temperatures. Remember that wood is a
detergent to water, as Winto Parquet by natural product and as such is sensitive
Nuncas. Dry well with soft cloth. If these to heat and humidity.
specific products are not available, Do not apply furniture waxes.
please use a moist cloth for daily clean-
ing and a neutral detergent for in-depth
cleaning.
SURFACES IN SOLID WOOD Clean with moist cloth. Products containing acetone, chlorine or Remove immediately any stains for
(TOPS EXCLUDED) For in-depth cleaning use vegetable diluents, powders or abrasive products. a v o i d i n g t h e i r p e r m e a t i o n . I t ’s
soap. Dry well with soft cloth. Strong alkaline detergents. recommended to use periodically the
specific cleaning / maintenance kit (cod.
AVBL023 / AVBL024).
TOPS IN SOLID WOOD Clean with dry cloth and multipurpose Products containing acetone, chlorine or Remove immediately any stains for
cream (Boffi Clean Set) or the Casa 9, diluents, powders or abrasive products. avoiding their permeation.
Multipurpose cleaner by Nuncas. Strong alkaline detergents.
For in-depth cleaning, add a neutral
detergent to water, as Winto Parquet by
Nuncas. Dry well with soft cloth. If these
specific products are not available,
please use a moist cloth for daily clean-
ing and a neutral detergent for in-depth
cleaning.
SURFACES IN MARBLE, Clean daily with a sponge and Metal scrubs, sponges or abrasive In case of fingerprints on matt polished
GRANITE OR STONE water+detergent C1.07 DAY (cod. products or bleach. In general, avoid all surface, please clean with lukewarm
(sandblasted finish matter) AVBL027) or Winto Marmo by Nuncas. acidic cleaners. water and dry well. Do not use oil-based
For persistent stains use only the deter- products or liquid wax or cleaners for
gent (without water). In case of polished other surface typologies.
finish, it’s possible to use Bel Marmo Pls. note: Marble and stone are porous
by Nuncas, to protect and maintain the materials, therefore stains penetrate
surface brightness. quickly and must be removed immediately;
On the surfaces, use periodically the kit they are particularly sensitive to oil, lemon,
of oleo-proofing and waterproof treat- vinegar, tea and coffee.
ment (cod. AVBL028), following the
instructions.
01/2018 0.45
G e n e r a l t e c h n i c a l i n f o r m a t i o n
MAINTENANCE - USE
SURFACES IN SILESTONE® For removing dust and fingerprints, clean Acid or strong alkaline products. Deter- Please gently remove stains of materials
with dry cloth and multipurpose cream gents containing bleach. that harden while drying (i.e. rubber,
(Boffi Clean Set) or the Casa 9, Multi- grease, nail varnish, paints, etc.), with
purpose cleaner by Nuncas. To remove a plastic scraper, after using some luke-
grease use Casa 9 Strong Degreaser warm water.
Premium by Nuncas with a moist sponge
and rinse well.
For removing limestone and soap depos-
its please use Wannet Blu by Nuncas. If
these specific products are not available,
please use a moist cloth for daily cleaning
and a neutral detergent or descaler for
in-depth cleaning.
SURFACES IN DEKTON® For removing dust and fingerprints, clean Acid or strong alkaline products. Deter-
with dry cloth and multipurpose cream gents containing bleach. Please gently remove stains of materials
(Boffi Clean Set) or the Casa 9, Multi- that harden while drying (i.e. rubber,
purpose cleaner by Nuncas. To remove grease, nail varnish, paints, etc.), with
grease use Casa 9 Strong Degreaser a plastic scraper, after using some luke-
Premium by Nuncas with a moist sponge warm water.
and rinse well.
For removing limestone and soap depos-
its please use Wannet Blu by Nuncas. If
these specific products are not available,
please use a moist cloth for daily cleaning
and a neutral detergent or descaler for
in-depth cleaning.
SURFACES IN GLASS AND For removing dust and fingerprints, Scrubs, abrasive detergents and creams.
ALUMINIUM clean the aluminium and glass parts with Detergents containing acids.
dry cloth and Glasnet by Nuncas. If this Use cotton rags or synthetic cloth in-
specific product is not available, please tended for cleaning glass in order to avoid
use a common window cleaning agent, leaving fluff on the frosted and pressed
rinsing and drying very well. glass surfaces.
SURFACES IN CRISTALPLANT® Clean with dry cloth and a cleaning Strong alkaline detergents such as con-
window agent as Glasnet by Nuncas. centrated degreasers.
For in-depth cleaning, use Brax Cleaner Scrubs and abrasive sponges. For removing persistent stains, please
Cream by Nuncas, rinse and dry well. use an abrasive sponge, as Scotch
For limestone stains please use Wannet Brite, with gel or abrasive detergents,
Blu by Nuncas. If these specifi c products rinsing well the surface. Please consult
are not available, please use a moist cloth the maintenance advice supplied with
and dry well. For persistent stains, consult the product too.
the maintenance advice supplied with
the product.
SURFACES IN CORIAN® Clean with dry cloth and a cleaning Strong alkaline detergents such as con-
window agent as Glasnet by Nuncas. centrated degreasers.
For in-depth cleaning, use Brax Cleaner Scrubs and abrasive sponges. In case of coloured stains such as wine,
Cream by Nuncas, rinse and dry well. coffee or vegetables like aubergines and
For limestone stains please use Wannet carrots, please clean the surface with
Blu by Nuncas. If these specific products bleach diluted with water (1 part bleach
are not available, please use a moist cloth to 2 parts water) - leaving it for some
and dry well. For persistent stains, consult seconds - then rinse well.
the maintenance advice supplied with
the product.
0.46 01/2018
G e n e r a l t e c h n i c a l i n f o r m a t i o n
MAINTENANCE - USE
SURFACES IN PAPERSTONE® Clean with moist cloth and warm water Abrasive detergents or containing bleach. Use extreme caution not to scratch the
and multipurpose cream (Boffi Clean surface. Do not use abrasive products.
Set) or the Casa 9, Multipurpose cleaner Do not place hot objects on the surfaces.
by Nuncas. If this specific product is not
available please use delicate detergent
and not abrasive or bleach diluted with
water (1 part bleach, 10 parts water).
SURFACES IN Clean with cotton moist cloth and water Scrubs and abrasive sponges, solvents, In case of stagnant water, please dry well
DE CASTELLI METAL or specific delicate detergent for painted generic or aggressive detergents. the surface.
surfaces.
TAPS, ACCESSORIES AND Clean with moist cloth and warm water Scrubs, detergents and abrasive creams. Use cotton rags or synthetic cloth to avoid
PARTS IN CHROMIUM-PLATED and multipurpose cream (Boffi Clean In general avoid all acidic detergents. leaving fluff on surfaces. For removing
FINISH Set) or the Casa 9, Multipurpose cleaner limestone and soap deposits please use
by Nuncas. If these specific products Wannet Blu by Nuncas.
are not available, please use water and
a neutral detergent.
TAPS, ACCESSORIES AND For removing dust and fingerprints, Scrubs, abrasive sponges. Use extreme caution not to scratch the
FINISHED PARTS IN STAINLESS clean with dry cloth and the Stainless Products containing ammonia or hydro- surface; do not use sharp objects to re-
STEEL Steel Polish Cleaner by Nuncas. If this chloric acid as these could stain the move the protective polythene film.
specific product is not available, please surface. Please remove shortly stains of food weak
use a moist cloth and dry with soft cloth acids (lemon, tomatoes etc.). Please
or chamois leather, or use a multipurpose use Steel Protective Cream by Nuncas
cleaner and rinse well. For persistent to remove limestone, ferrous stains and
stains use warm vinegar. small scratches.
Always clean in a motion parallel to the
polish markings.
To remove limestone and dirt from aera-
tor filters, please remove the aerator and
keep it soaking in white vinegar for some
hours.
Then please wash with water and soap
and finally rinse well.
TAPS, ACCESSORIES AND FIN- Clean daily with soft cloth and water and Remove immediately any residues left on
ISHED PARTS IN PVD neutral detergent. For in-depth cleaning Scrubs, abrasive detergents and creams, the surface, especially fluorine-containing
and persistent dirt, please use soft cloth abrasive sponges, bleach, ammonia, toothpastes.
with warm water and vinegar. hydrochloric acid, hydrofluoric acid and
Rinse well and dray with microfiber cloth. derivatives, and all detergents contain-
ing acids.
HANDLES IN ALUMINIUM AND For removing dust and fingerprints, Avoid scratching as all handles are
PAINTED ZAMA clean with dry cloth and the Stainless Scrubs, abrasive detergents and creams. treated with anti-oxidation paints.
Steel Polish Cleaner by Nuncas. If this Detergents containing acids.
specific product is not available, please
use a moist cloth and dry with soft cloth
or chamois leather, or use a multipurpose
cleaner and rinse well. Always clean in a
motion parallel to the polish markings.
CERAMIC WASHBASINS AND Clean with a dry cloth and the Glasnet For removing limestone and soap depos-
SANITARY FIXTURES by Nuncas. If this specific product is not Scrubs, abrasive detergents and creams. its please use Wannet Blu by Nuncas.
available, please use common detergents Detergents containing acids.
for sanitary fixtures.
01/2018 0.47
G e n e r a l t e c h n i c a l i n f o r m a t i o n
MAINTENANCE - USE
CERAMILUX® - POLISHED For removing most kinds of stains, such Do not clean with abrasive detergents, Certain substances, e.g. ink, cosmetics
as lime or dirt marks, simply clean using a abrasive sponges, scrapers, acetone, or dyes may release colouring agents
moist cloth or a non-abrasive sponge and trichlorethylene, solvents, strong acids on the surface, which are therefore to
multipurpose cream (Boffi Clean Set) or (muriatic acid, etc.), or bases (caustic be avoided. Do not use the surface as a
a gel detergent. soda, etc.), drain cleaner. cutting board.
Although Ceramilux® is heat-resistant,
do not place any burning-hot object, lit
cigarettes or pour any boiling fluid on
its surface.
CERAMILUX® - MATT For removing most kinds of stains, such as Do not clean with abrasive sponges, Do not use scrapers.
lime or dirt marks, is recommended to use scrapers, acetone, trichlorethylene, sol- Certain substances, e.g. ink, cosmetics
an abrasive sponge like “Scotch Brite” vents, strong acids (muriatic acid, etc.) or or dyes may release colouring agents
with multipurpose cream (Boffi Clean bases (caustic soda, etc.), drain cleaner. on the surface, which are therefore to
Set) or Brax Cleaner Cream by Nuncas. be avoided. Do not use the surface as a
Finally rinse well. cutting board.
If these specific products are not avail- Although Ceramilux® is heat-resistant,
able, please use soap and water or do not place any burning-hot object, lit
common detergents (cream or gel), also cigarettes or pour any boiling fluid on
lightly abrasive. its surface.
0.48 01/2018
P r o g r a m m a S T A N D A R D
TECHNICAL FEATURES
Tops
THICKNESS: 12 - 15 - 20 - 23 mm.
DEPTH: 500 mm
Carcasses
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low
formaldehyde emission (class E1/CARB P2), treated with high performance melamine
resin. Front and back edges in ABS, same colour.
SIDE PANEL HEIGHT: 300 - 470 mm (both compatible with built-in / under-mounted /
moulded flush-mounted Boffi washbasins).
SIDE PANEL DEPTH: 470 mm.
DEPTH INCLUDING DOOR: 495 mm.
The visible side panels of all compositions are finished, without an extra charge (please
note that front panels in Corian® have finished side panels in white Ecolak and front
panels in Wood 3D have finished side panels in wood veneer - without 3D effect).
The finished side panel includes the finishing of the frontal vertical edge too (Lasermat
excluded).The finished side panel IS NOT FEASIBLE in SOLID WOOD and 3D SOLID
WOOD: for these finishes please order the end panels separately.
Drawers
LEGRABOX series with side and back panels in varnished matt black metal. Bottom in
black melamine. Front of internal drawers in melamine, same finish as carcass.
Handles
Each front should have an handle, to be chosen from the range, considering the addition
or not of the price increase.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 1.3
P r o g r a m m a S T A N D A R D CARCASSES
FEASIBLE FINISHES - CABINETS MELAMINE-COATED
130 608 606
Silk white Grey-graphite Elm wood
oak (open- (open-pore
pore effect) effect)
SILCOVER
1 003
White
129
Magnolia
119
Grey
024
Pebble grey
131
Sand
025
Ècru
023
Mud
134 118
Graphite-grey Black
ECOLAK
510 129 513 024 512 025 023 515 517 027
Arctic white Magnolia Cloud colour Pebble grey Oat colour Ècru Mud Basalt grey Charcoal Black
WOOD
POLYESTER
003 129 005 024 063 106 004 007 001 027
White Magnolia Grey RAL Pebble grey Sand Sahara Grey Dark green Andalusian red Black
7038
METALS
WOOD SELECTION
CORIAN®
173
White
WOOD 3D
048 100
Core walnut Black eco-
wood
SOLID WOOD
058 057
Canaletto Old grey
LIGHT walnut pinewood
“sawn-effect“
SOLID WOOD 3D
058
Canaletto
LIGHT walnut
“sawn-effect“
WOOD EXCLUSIVE
077
Abonos oak
L = Width
P = Depth
H = Height
Pr = Price code
1.4 01/2018
P r o g r a m m a S T A N D A R D WASHBASIN
FEASIBLE FINISHES - TOPS TYPOLOGIES
CRISTALPLANT®
H 15 mm
-
White
LASERMAT
H 20 mm
CORIAN®
H 20 mm
173
White
STONE - MARBLE -
A A B B B C D D E E
GRANITE
H 20 mm
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE
C C C D D D D D D D
SILESTONE®
H 20 mm
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
H 20 mm
D D D E E E E E E
SOLID WOOD
H 23 mm
058 057
Canaletto Old grey
LIGHT walnut pinewood
“sawn-effect“
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 1.5
P r o g r a m m a S T A N D A R D
HANDLES
Please see the GENERAL TECHNICAL INFORMATION - HANDLES section for the choice of the handle size, finish and positioning.
1
T LINE HANDLE
LASERMAT LASERMAT
SILCOVER SILCOVER
ECOLAK ECOLAK
WOOD WOOD
WOOD·SELECTION WOOD·SELECTION
METALS METALS
POLYESTER POLYESTER
CORIAN® CORIAN®
WOOD·3D WOOD·3D
WOOD·EXCLUSIVE WOOD·EXCLUSIVE
SOLID·WOOD SOLID·WOOD
SOLID·WOOD·3D SOLID·WOOD·3D
HANDLES WITH PRICE INCREASE - Please add the price increase cod. JZMW01 to each door or front panel
Compatible finishes: Compatible finishes: Compatible finishes: Compatible finishes: Compatible finishes: Compatible finishes:
L = Width
P = Depth
H = Height
Pr = Price code
1.6 01/2018
P r o g r a m m a S T A N D A R D
Technical chart
Modules
1700
10 - 12
15 - 20
300
a a
470
200 - 320
225 - 345
495
470
23
23
max.235
min.155
min.288
max.385
Position of water drain - “a“ dimension
300
300
= =
= =
min.288
max.385
max.235
max.235
min.155
min.155
min.288
max.385
470
470
470
470
= = = = = = = =
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 1.7
P r o g r a m m a S T A N D A R D
TECHNICAL DETAILS
1 23 23 23 23 23
470 470 470 470 470
495 495 495 495 495
206 206
470
206 206
23 cassetto opzionale
470 optional drawer
261/411 301 261/411
19 19 19 19 tiroir optionnel
495
optionale Schublade
cajón opcional
23 23 23 23
470 470 470 470
2 2
231
231
2 2
= =
23 23
200 320
225 345
L = Width
P = Depth
H = Height
Pr = Price code
1.8 01/2018
P r o g r a m m a S T A N D A R D BUILT-IN washbasins
COMPOSITIONS - COMPATIBLE WASHBASINS TOP-MOUNTED washbasins - UNDER-MOUNTED
washbasins
WXCHAE01 - WXCHAE03
• The washbasin position is centred according to the middle part of the
under-washbasin unit.
W2KPAJ001
Adda Corian®
WRUNAB03
WRUNAB02
WBGAAE01
WRGBAE01
WRGBAE02
WNADAE01
WRAQAE02
WRCDAB01
WRSBAC01
A45 Compact
WRSBAB01
WRSBAB02
WAPTAB01
WAPTAB02
WAPTAB02
WRAFAE01
WRLSAE01
WRICAE01
Fisher Island
Sabbia BTM
Cathino 3
Cathino 1
Sabbia 3
SIDEL 2
Garden
Iceland
Gobi 1
Gobi 2
Lotus
Compatible with wall-mounted spout / top-mounted spout positioned behind or laterally
Compatible with wall-mounted spout or top-mounted spout positioned laterally
1 Compatible with wall-mounted spout
Compatible with wall-mounted spout or top-mounted spout positioned behind.
Composizione (Composition) 1A
Composizione (Composition) 2A
Composizione (Composition) 3A
Composizione (Composition) 4A
Composizione (Composition) 5A
Composizione (Composition) 6A
Composizione (Composition) 7A
Composizione (Composition) 8A
Composizione (Composition) 9A
Composizione (Composition) 10A
Composizione (Composition) 11A
Composizione (Composition) 12A
Composizione (Composition) 13A
Composizione (Composition) 14A
Composizione (Composition) 15A
Composizione (Composition) 16A
Composizione (Composition) 17A
Composizione (Composition) 18A
Composizione (Composition) 19A
Composizione (Composition) 20A
Composizione (Composition) 1B
Composizione (Composition) 2B
Composizione (Composition) 3B
Composizione (Composition) 4B
Composizione (Composition) 5B
Composizione (Composition) 6B
Composizione (Composition) 7B
Composizione (Composition) 8B
Composizione (Composition) 9B
Composizione (Composition) 10B
Composizione (Composition) 11B
Composizione (Composition) 12B
Composizione (Composition) 13B
Composizione (Composition) 14B
Composizione (Composition) 15B
219,3 223,5
Pr * 70,1 117,2 84,2 54,4 87,1 52,4 43,9 142,1 86,2 98,0 74,3 55,8 78,2 62,4 72,0 82,8 64,5 231,5 235,8 70,0
* The price of the GARDEN washbasin changes according to the finish of the internal bottom cover: please see "Washbasins" chapter.
L = Width
P = Depth
H = Height
Pr = Price code
1.14 01/2018
P r o g r a m m a S T A N D A R D BUILT-IN washbasins
COMPOSITIONS - COMPATIBLE WASHBASINS TOP-MOUNTED washbasins - UNDER-MOUNTED
washbasins
WRAQAE01 - WMAQAE01
WXCHAE02 - WXCHAE04
WXCHAE01 - WXCHAE03
under-washbasin unit.
W2KPAJ001
Adda Corian®
WRUNAB03
WRUNAB02
WBGAAE01
WRGBAE01
WRGBAE02
WNADAE01
WRAQAE02
WRCDAB01
WRSBAC01
A45 Compact
WRSBAB02
WAPTAB01
WAPTAB02
WAPTAB02
WRAFAE01
WRLSAE01
WRICAE01
Fisher Island
Sabbia BTM
WRSBAB01
Cathino 3
Cathino 1
Sabbia 3
Garden
Iceland
Sidel 2
Gobi 1
Gobi 2
Lotus
Compatible with wall-mounted spout / top-mounted spout positioned behind or laterally
Compatible with wall-mounted spout or top-mounted spout positioned laterally
Compatible with wall-mounted spout 1
Compatible with wall-mounted spout or top-mounted spout positioned behind.
219,3 223,5
Pr * 70,1 117,2 84,2 54,4 87,1 52,4 43,9 142,1 86,2 98,0 74,3 55,8 78,2 62,4 72,0 82,8 64,5 231,5 235,8 70,0
* The price of the GARDEN washbasin changes according to the finish of the internal bottom cover: please see "Washbasins" chapter.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 1.15
P r o g r a m m a S I M P L E
TECHNICAL FEATURES
Suspended, modular base/tall units with push opening system TIP-ON. Units with handle
are not feasible.
Tops
THICKNESS: 12 - 15 - 20 - 23 mm.
DEPTH: 500 mm
Carcasses
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low
formaldehyde emission (class E1/CARB P2), treated with high performance melamine
resin. Front and back edges in ABS, same colour.
SIDE PANEL HEIGHT: 300 - 470 mm (both compatible with built-in / under-mounted /
moulded flush-mounted Boffi washbasins).
SIDE PANEL DEPTH: 470 mm.
DEPTH INCLUDING DOOR: 495 mm.
The visible side panels of all compositions are finished, without an extra charge (please
note that front panels in Corian® have finished side panels in white Ecolak and front
panels in Wood 3D have finished side panels in wood veneer - without 3D effect).
The finished side panel includes the finishing of the frontal vertical edge too (Lasermat
excluded).The finished side panel IS NOT FEASIBLE in SOLID WOOD and 3D SOLID
TIP-ON
WOOD: for these finishes please order the end panels separately.
Drawers
LEGRABOX series with side and back panels in varnished matt black metal. Bottom in
black melamine. Front of internal drawers in melamine, same finish as carcass.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 2.3
P r o g r a m m a S I M P L E CARCASSES
FEASIBLE FINISHES - CABINETS MELAMINE-COATED
130 608 606
Silk white Grey-graphite Elm wood
oak (open- (open-pore
pore effect) effect)
SILCOVER
2
ECOLAK
510 129 513 024 512 025 023 515 517 027
Arctic white Magnolia Cloud colour Pebble grey Oat colour Ècru Mud Basalt grey Charcoal Black
WOOD
POLYESTER
003 129 005 024 063 106 004 007 001 027
White Magnolia Grey RAL Pebble grey Sand Sahara Grey Dark green Andalusian red Black
7038
METALS
WOOD SELECTION
CORIAN®
173
White
WOOD 3D
048 100
Core walnut Black eco-
wood
SOLID WOOD
058 057
Canaletto Old grey
LIGHT walnut pinewood
“sawn-effect“
SOLID WOOD 3D
058
Canaletto
LIGHT walnut
“sawn-effect“
WOOD EXCLUSIVE
077
Abonos oak
L = Width
P = Depth
H = Height
Pr = Price code
2.4 01/2018
P r o g r a m m a S I M P L E WASHBASIN
FEASIBLE FINISHES - TOPS TYPOLOGIES
2
CRISTALPLANT®
H 15 mm
-
White
LASERMAT
H 20 mm
CORIAN®
H 20 mm
173
White
STONE - MARBLE -
A A B B B C D D E E
GRANITE
H 20 mm
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE
C C C D D D D D D D
SILESTONE®
H 20 mm
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
H 20 mm
D D D E E E E E E
SOLID WOOD
No Match!
058 057
Canaletto Old grey
LIGHT walnut pinewood
“sawn-effect“
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 2.5
P r o g r a m m a S I M P L E
Technical chart
Modules
1700
10 - 12
15 - 20
300
a a
470
200 - 320
225 - 345
495
470
23
23
max.235
min.155
min.288
max.385
Position of water drain - “a“ dimension
300
300
= =
= =
min.288
max.385
max.235
max.235
min.155
min.155
min.288
max.385
470
470
470
470
= = = = = = = =
L = Width
P = Depth
H = Height
Pr = Price code
2.6 01/2018
P r o g r a m m a S I M P L E
TECHNICAL DETAILS
470 470
300
23 23 23
470 470 470
495 495 495 2
206 206
470
206 206
23 cassetto opzionale
470 optional drawer
261/411 301 261/411
19 19 19 19 tiroir optionnel
495
optionale Schublade
cajón opcional
23 23 23 23
470 470 470 470
2 2
231
231
2 2
= =
23 23
200 320
225 345
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 2.7
P r o g r a m m a S I M P L E BUILT-IN washbasins
COMPOSITIONS - COMPATIBLE WASHBASINS TOP-MOUNTED washbasins - UNDER-MOUNTED
washbasins
WXCHAE01 - WXCHAE03
• The washbasin position is centred according to the middle part of the
under-washbasin unit.
W2KPAJ001
Adda Corian®
WRUNAB03
WRUNAB02
WBGAAE01
WRGBAE01
WRGBAE02
WNADAE01
WRAQAE02
WRCDAB01
WRSBAC01
A45 Compact
WRSBAB01
WRSBAB02
WAPTAB01
WAPTAB02
WAPTAB02
WRAFAE01
WRLSAE01
WRICAE01
Fisher Island
Sabbia BTM
Cathino 3
Cathino 1
Sabbia 3
SIDEL 2
Garden
Iceland
Gobi 1
Gobi 2
Lotus
Compatible with wall-mounted spout / top-mounted spout positioned behind or laterally
Compatible with wall-mounted spout or top-mounted spout positioned laterally
Compatible with wall-mounted spout
Compatible with wall-mounted spout or top-mounted spout positioned behind.
2 Composizione (Composition) 1A
Composizione (Composition) 2A
Composizione (Composition) 3A
Composizione (Composition) 4A
Composizione (Composition) 5A
Composizione (Composition) 6A
Composizione (Composition) 7A
Composizione (Composition) 8A
Composizione (Composition) 9A
Composizione (Composition) 10A
Composizione (Composition) 11A
Composizione (Composition) 12A
Composizione (Composition) 13A
Composizione (Composition) 14A
Composizione (Composition) 15A
Composizione (Composition) 16A
Composizione (Composition) 17A
Composizione (Composition) 18A
Composizione (Composition) 19A
Composizione (Composition) 20A
Composizione (Composition) 1B
Composizione (Composition) 2B
Composizione (Composition) 3B
Composizione (Composition) 4B
Composizione (Composition) 5B
Composizione (Composition) 6B
Composizione (Composition) 7B
Composizione (Composition) 8B
Composizione (Composition) 9B
Composizione (Composition) 10B
Composizione (Composition) 11B
Composizione (Composition) 12B
Composizione (Composition) 13B
Composizione (Composition) 14B
Composizione (Composition) 15B
219,3 223,5
Pr * 70,1 117,2 84,2 54,4 87,1 52,4 43,9 142,1 86,2 98,0 74,3 55,8 78,2 62,4 72,0 82,8 64,5 231,5 235,8 70,0
* The price of the GARDEN washbasin changes according to the finish of the internal bottom cover: please see "Washbasins" chapter.
L = Width
P = Depth
H = Height
Pr = Price code
2.14 01/2018
P r o g r a m m a S I M P L E
COMPOSITIONS - COMPATIBLE WASHBASINS TOP-MOUNTED washbasins BUILT-IN washbasins - UN-
DER-MOUNTED washbasins
WXCHAE02 - WXCHAE04
WXCHAE01 - WXCHAE03
under-washbasin unit.
W2KPAJ001
Adda Corian®
WRUNAB03
WRUNAB02
WBGAAE01
WRGBAE01
WRGBAE02
WNADAE01
WRAQAE02
WRCDAB01
WRSBAC01
A45 Compact
WRSBAB02
WAPTAB01
WAPTAB02
WAPTAB02
WRAFAE01
WRLSAE01
WRICAE01
Fisher Island
Sabbia BTM
WRSBAB01
Cathino 3
Cathino 1
Sabbia 3
Garden
Iceland
Sidel 2
Gobi 1
Gobi 2
Lotus
Compatible with wall-mounted spout / top-mounted spout positioned behind or laterally
Compatible with wall-mounted spout or top-mounted spout positioned laterally
Compatible with wall-mounted spout
Compatible with wall-mounted spout or top-mounted spout positioned behind.
219,3 223,5
Pr * 70,1 117,2 84,2 54,4 87,1 52,4 43,9 142,1 86,2 98,0 74,3 55,8 78,2 62,4 72,0 82,8 64,5 231,5 235,8 70,0
* The price of the GARDEN washbasin changes according to the finish of the internal bottom cover: please see "Washbasins" chapter.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 2.15
X I L A B A T H
TECHNICAL FEATURES
Suspended, modular base units without handle. The tops have a specific recessed
finished band on the bottom, which create an handle-rail effect. This detail in combination
with the bevelled edge of the doors will offer the grip needed to open the door fronts.
Tops
The square-edged tops, with finished lower front, can be fitted with top-mounted, built-in,
under-mounted or moulded flush-mounted washbasins.
FINISHES for 12 mm thick tops (+ lower front H 50 mm): Silestone® - Dekton® composite.
FINISHES for 15 mm thick tops (+ lower front H 50 mm): Cristalplant®.
FINISHES for 20 mm thick tops (+ lower front H 50 mm): Corian®, stone-marble-granite-
composite (Corian® compatible only with top-mounted washbasins in Ceramilux® or
moulded flush-mounted in Corian®).
Carcasses
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low
formaldehyde emission (class E1/CARB P2), treated with high performance melamine
resin. Front and back edges in ABS, same colour.
SIDE PANEL HEIGHT: 300 - 470 mm (both compatible with built-in / under-mounted /
moulded flush-mounted Boffi washbasins).
HEIGHT INCLUDING DOOR: 315 - 485 mm.
SIDE PANEL DEPTH: 470 mm.
DEPTH INCLUDING DOOR: 495 mm.
Drawers
LEGRABOX series with side and back panels in varnished matt black metal. Bottom in
black melamine. Front of internal drawers in melamine, same finish as carcass.
Finished, thickness 23 mm, with upper bevelled edge (on doors in stone / marble / granite
the upper profile is in painted aluminium, black or white).
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 3.3
X I L A B A T H CARCASSES
FEASIBLE FINISHES - CABINETS MELAMINE-COATED
130 608 606
Silk white Grey-graphite Elm wood
oak (open- (open-pore
pore effect) effect)
ECOLAK
510 129 513 024 512 025 023 515 517 027
Arctic white Magnolia Cloud colour Pebble grey Oat colour Ècru Mud Basalt grey Charcoal Black
WOOD
3
049 033 076 331 332 100
Oak Ash-grey oak Grey-graphite Larch wood, Larch wood, Black Eco-
oak Aspen white Orion black wood
POLYESTER
003 129 005 024 063 106 004 007 001 027
White Magnolia Grey RAL Pebble grey Sand Sahara Grey Dark green Andalusian red Black
7038
METALS
WOOD SELECTION
CORIAN®
173
White
SOLID WOOD
058 057
Canaletto Old grey
LIGHT walnut pinewood
“sawn-effect“
WOOD EXCLUSIVE
077
Abonos oak
STONE - MARBLE -
GRANITE
A B B C D E E
L = Width
P = Depth
H = Height
Pr = Price code
3.4 01/2018
X I L A B A T H WASHBASIN
FEASIBLE FINISHES - TOPS TYPOLOGIES
-
White
CORIAN®
H 20 + 50 mm
173
White
STONE - MARBLE -
A A B B B C D D E E
GRANITE
H 20+50 mm 3
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE
C C C D D D D D D D
SILESTONE®
H 12 + 50 mm
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE
SILESTONE®
H 20 + 50 mm
COMPOSITE
D D D E E E E E E
DEKTON®
H 12 + 50 mm
455 452 453 454 456 451 457 458 459
Edora beige Kadum brown Sirius black Zenith white Irok beige Strato grey Ventus grey Korus grey Galema brown
COMPOSITE
DEKTON®
H 20 + 50 mm
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 3.5
X I L A B A T H
Technical chart
Modules
12-15-20
12-15-20
35
350
315
485
520
a a
3
100 100 100 100
X
X
300 - 450 - 600 300 - 450 - 600
900 - 1200 600 - 900 - 1200 600 - 900 - 1200 900 -1200 1200
498
470
23
min.288
max.385
min.155
50
50
350
350
300
300
= =
= =
max.235
max.235
min.155
min.155
min.288
min.288
max.385
max.385
50
50
50
50
520
520
520
520
470
470
470
470
= = = = = = = =
L = Width
P = Depth
H = Height
Pr = Price code
3.6 01/2018
X I L A B A T H TOP-MOUNTED washbasins BUILT-IN washbasins - UN-
COMPOSITIONS - COMPATIBLE WASHBASINS DER-MOUNTED washbasins
WXCHAE01 - WXCHAE03
• The washbasin position is centred according to the middle part
of the under-washbasin unit.
W2KPAJ001
Adda Corian®
WRUNAB03
WRUNAB02
WBGAAE01
WRGBAE01
WRGBAE02
WNADAE01
WRAQAE02
WRCDAB01
WRSBAC01
A45 Compact
WRSBAB02
WAPTAB01
WAPTAB02
WAPTAB02
WRAFAE01
WRLSAE01
WRICAE01
Fisher Island
Sabbia BTM
WRSBAB01
Cathino 3
Cathino 1
Sabbia 3
Garden
Iceland
Sidel 2
Gobi 1
Gobi 2
Lotus
Compatible with wall-mounted spout / top-mounted spout positioned behind or laterally
Compatible with wall-mounted spout or top-mounted spout positioned laterally
Compatible with wall-mounted spout
Compatible with wall-mounted spout or top-mounted spout positioned behind.
Composizione (Composition) 1A
3 Composizione (Composition) 2A
Composizione (Composition) 3A
Composizione (Composition) 4A
Composizione (Composition) 5A
Composizione (Composition) 6A
Composizione (Composition) 7A
Composizione (Composition) 8A
Composizione (Composition) 9A
Composizione (Composition) 10A
Composizione (Composition) 1B
Composizione (Composition) 2B
Composizione (Composition) 3B
Composizione (Composition) 4B
Composizione (Composition) 5B
Composizione (Composition) 6B
Composizione (Composition) 7B
Composizione (Composition) 8B
Composizione (Composition) 9B
Composizione (Composition) 10B
219,3 223,5
Pr * 70,1 117,2 84,2 54,4 87,1 52,4 43,9 142,1 86,2 98,0 74,3 55,8 78,2 62,4 72,0 82,8 64,5 231,5 235,8 70,0
* The price of the GARDEN washbasin changes according to the finish of the internal bottom cover: please see "Washbasins" chapter.
3.14 01/2018
S O H O
TECHNICAL FEATURES
Suspended, modular base units, fitted with push opening system TIP-ON. Cabinets
with handle are not available. Finished end panels, 5 mm thick (glass finish) or 3 mm
thick (aluminium finish).
Tops
THICKNESS: 12 - 15 - 20 mm
DEPTH: 480 mm
Carcasses
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low
formaldehyde emission (class E1/CARB P2), treated with high performance melamine
resin. Front and back edges in ABS, same colour.
SIDE PANEL HEIGHT: 300 - 470 mm (both compatible with built-in / under-mounted /
moulded flush-mounted Boffi washbasins).
SIDE PANEL DEPTH: 470 mm.
DEPTH INCLUDING DOOR: 475 mm.
TIP-ON
Drawers
LEGRABOX series with side and back panels in varnished matt black metal. Bottom in
black melamine. Front of internal drawers in melamine, same finish as carcass.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 4.3
S O H O CARCASSES
FEASIBLE FINISHES - CABINETS MELAMINE-COATED
130 608 606
Silk white Grey-graphite Elm wood
oak (open- (open-pore
pore effect) effect)
ALUMINIUM
382 381
Steel Dark
S O H O WASHBASIN
FEASIBLE FINISHES - TOPS TYPOLOGIES
CRISTALPLANT®
H 15 mm
-
White
STONE - MARBLE -
A A B B B C D D E E
GRANITE
H 20 mm
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE
C C C D D D D D D D
SILESTONE®
H 20 mm
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
H 20 mm
D D D E E E E E E
L = Width
P = Depth
H = Height
Pr = Price code
4.4 01/2018
S O H O
Technical chart
Modules
3-5
12 - 15 - 20
470
300
a a
470
170
4
479
470
5
max.235
min.288
max.385
min.155
300
= =
= =
max.235
min.155
min.288
max.385
470
470
= = = =
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 4.5
S O H O TOP-MOUNTED washbasins BUILT-IN washbasins - UN-
COMPOSITIONS - COMPATIBLE WASHBASINS DER-MOUNTED washbasins
WXCHAE01 - WXCHAE03
• The washbasin position is centred according to the middle part of the
under-washbasin unit.
W2KPAJ001
WRUNAB03
WRUNAB02
• Complete compositions: WASHBASIN CUT-OUT price is included.
WBGAAE01
WRGBAE01
WRGBAE02
WRAQAE02
WRCDAB01
WRSBAC01
A45 Compact
WRSBAB02
WAPTAB01
WAPTAB02
WAPTAB02
WRAFAE01
WRLSAE01
WRICAE01
Fisher Island
Sabbia BTM
WRSBAB01
• Compositions designed by Customer: ADD THE WASHBASIN CUT-
Cathino 3
Cathino 1
Sabbia 3
OUT (see “Customised Solutions“ chapter).
Garden
Iceland
Sidel 2
Gobi 1
Gobi 2
Lotus
Compatible with wall-mounted spout / top-mounted spout positioned behind or laterally
Compatible with wall-mounted spout or top-mounted spout positioned laterally
Compatible with wall-mounted spout
Compatible with wall-mounted spout or top-mounted spout positioned behind.
Composizione (Composition) 1A / 1B
Composizione (Composition) 2A / 2B
Composizione (Composition) 3A / 3B
4
Composizione (Composition) 4A / 4B
Composizione (Composition) 5A / 5B
Composizione (Composition) 6A / 6B
Composizione (Composition) 7A / 7B
Composizione (Composition) 8A / 8B
Composizione (Composition) 9A / 9B
Composizione (Composition) 10A / 10B
Composizione (Composition) 11A / 11B
Composizione (Composition) 12A / 12B
Composizione (Composition) 13A / 13B
Composizione (Composition) 14A / 14B
Composizione (Composition) 15A / 15B
Composizione (Composition) 16A / 16B
Composizione (Composition) 17A / 17B
Composizione (Composition) 18A / 18B
Composizione (Composition) 19A / 19B
Composizione (Composition) 20A / 20B
Composizione (Composition) 21A / 21B
Composizione (Composition) 22A / 22B
Composizione (Composition) 23A / 23B
Composizione (Composition) 24A / 24B
Composizione (Composition) 25A / 25B
Composizione (Composition) 26A / 26B
Composizione (Composition) 27A / 27B
Composizione (Composition) 28A / 28B
Composizione (Composition) 29A / 29B
Composizione (Composition) 30A / 30B
Composizione (Composition) 31A / 31B
Composizione (Composition) 32A / 32B
Composizione (Composition) 33A / 33B
Composizione (Composition) 34A / 34B
Composizione (Composition) 35A / 35B
219,3 223,5
Pr * 70,1 117,2 84,2 54,4 87,1 52,4 43,9 86,2 74,3 55,8 78,2 62,4 72,0 82,8 64,5 231,5 235,8 70,0
* The price of the GARDEN washbasin changes according to the finish of the internal bottom cover: please see "Washbasins" chapter.
L = Width
P = Depth
H = Height
Pr = Price code
4.10 01/2018
B 1 4
TECHNICAL FEATURES
Suspended, modular base units, available for central and end use. The units haven’t an
handle and are equipped with under top handle-rail. The door opening is allowed by
the upper bevelled-edge door matched with the handle-rail and the bevelled-edge top.
Tops
The tops have visible bevelled edges, on one or more sides, according to the project.
THICKNESS: 50 mm
DEPTH: 505 mm
In painted aluminium, placed between top and door, along all bevelled-edge top sides.
Carcasses
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low
formaldehyde emission (class E1/CARB P2), treated with high performance melamine
resin. Front and back edges in ABS, same colour.
SIDE PANEL HEIGHT: 300 - 635 mm (both compatible with built-in / under-mounted /
moulded flush-mounted Boffi washbasins).
SIDE PANEL DEPTH: 470 mm.
DEPTH INCLUDING DOOR: 495 mm.
Drawers
LEGRABOX series with side and back panels in varnished matt black metal. Bottom in
black melamine. Front of internal drawers in melamine, same finish as carcass.
Finished, thickness 23 mm, with upper bevelled edge (door type BN). On end base units
and end panels the vertical lateral edges are bevelled too.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 5.3
B 1 4 CARCASSES
FEASIBLE FINISHES - CABINETS MELAMINE-COATED
130 608 606
Silk white Grey-graphite Elm wood
oak (open- (open-pore
pore effect) effect)
ECOLAK
510 129 513 024 512 025 023 515 517 027
Arctic white Magnolia Cloud colour Pebble grey Oat colour Ècru Mud Basalt grey Charcoal Black
WOOD
POLYESTER
5
003 129 005 024 063 106 004 007 001 027
White Magnolia Grey RAL Pebble grey Sand Sahara Grey Dark green Andalusian red Black
7038
METALS
WOOD SELECTION
CORIAN®
173
White
SOLID WOOD
058 057
Canaletto Old grey
LIGHT walnut pinewood
“sawn-effect“
WOOD EXCLUSIVE
077
Abonos oak
L = Width
P = Depth
H = Height
Pr = Price code
5.4 01/2018
B 1 4 WASHBASIN
FEASIBLE FINISHES - TOPS TYPOLOGIES
-
White
STONE - MARBLE -
A A B B B C D D E E
GRANITE
H 50 mm
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE
C C C D D D D D D D
SILESTONE®
H 50 mm
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
H 50 mm
D D D E E E E E E 5
455 452 453 454 456 451 457 458 459
Edora beige Kadum brown Sirius black Zenith white Irok beige Strato grey Ventus grey Korus grey Galema brown
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 5.5
B 1 4
Technical chart
Modules
10
50 50
a
300
a
635
100 100
900 100 100
5
23 450 450 900 600 1200 600 23 495
505
2435 1835
max.235
min.288
max.385
min.155
= =
= =
max.235
max.235
min.155
min.155
min.288
min.288
max.385
max.385
647
647
647
647
= = = = = = = =
L = Width
P = Depth
H = Height
Pr = Price code
5.6 01/2018
B 1 4
TECHNICAL DETAILS
495
312 300
55
312 300
312 300
647 635
5
647 635
647 635
312 300
312
647 635
312
D 187
647 635
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 5.7
B 1 4
TECHNICAL DETAILS
505
50
1,5
4
H. 300 / 635
3
2 1
470 505
35° The under top aluminium handle-rail is thought to be placed on the upper
50
21
L = Width
P = Depth
H = Height
Pr = Price code
5.8 01/2018
B 1 4
COMPOSITIONS - COMPATIBLE WASHBASINS TOP-MOUNTED washbasins BUILT-IN washbasins - UN-
DER-MOUNTED washbasins
WRAQAE01 - WMAQAE01
WXCHAE02 - WXCHAE04
WXCHAE01 - WXCHAE03
• The washbasin position is centred according to the middle part of the under-washbasin
unit.
WRUNAB03
WRUNAB02
WBGAAE01
WRGBAE01
WRGBAE02
WNADAE01
WRAQAE02
WRCDAB01
WRSBAC01
A45 Compact
WAPTAB01
WAPTAB02
WAPTAB02
WRAFAE01
WRLSAE01
WRICAE01
Fisher Island
Sabbia BTM
Cathino 3
Cathino 1
Sabbia 3
Garden
Iceland
Sidel 2
Gobi 1
Gobi 2
Lotus
Compatible with wall-mounted spout / top-mounted spout positioned behind or laterally
Compatible with wall-mounted spout or top-mounted spout positioned laterally
Compatible with wall-mounted spout
Composizione (Composition) 1A
Composizione (Composition) 2A
Composizione (Composition) 3A
Composizione (Composition) 4A
Composizione (Composition) 5A
Composizione (Composition) 6A
5 Composizione (Composition) 7A
Composizione (Composition) 8A
Composizione (Composition) 9A
Composizione (Composition) 10A
Composizione (Composition) 11A
Composizione (Composition) 12A
Composizione (Composition) 13A
Composizione (Composition) 14A
Composizione (Composition) 15A
Composizione (Composition) 16A
Composizione (Composition) 17A
Composizione (Composition) 18A
Composizione (Composition) 1B
Composizione (Composition) 2B
Composizione (Composition) 3B
Composizione (Composition) 4B
Composizione (Composition) 5B
Composizione (Composition) 6B
Composizione (Composition) 7B
Composizione (Composition) 8B
Composizione (Composition) 9B
Composizione (Composition) 10B
Composizione (Composition) 11B
Composizione (Composition) 12B
Composizione (Composition) 13B
Composizione (Composition) 14B
Composizione (Composition) 15B
Composizione (Composition) 16B
Composizione (Composition) 17B
Composizione (Composition) 18B
219,3 223,5
Pr * 70,1 117,2 84,2 54,4 87,1 52,4 43,9 142,1 86,2 98,0 74,3 55,8 78,2 62,4231,5 235,8 70,0
* The price of the GARDEN washbasin changes according to the finish of the internal bottom cover: please see "Washbasins" chapter.
L = Width
P = Depth
H = Height
Pr = Price code
5.16 01/2018
I F I U M I S T
TECHNICAL FEATURES
Suspended, modular base units without handle. The 45° angled sections of front and
end panels houses the top, which has 45° edges on 3 sides (the cabinet edges cover
the top thickness). The drawer can be opened through the lower side of the front. Base
units can be suspended or floor-mounted. Cabinets with handle are not available.
Tops
Tops have 45° edges on 3 sides, to match upper edges of front and end panels in finish,
in order to make the top thickness not visible.
THICKNESS: 20 mm
DEPTH: 531 mm
Carcasses
Drawers
LEGRABOX series with side and back panels in varnished matt black metal. Bottom in
black melamine. Front of internal drawers in same finish as carcass.
Thickness 19 mm in MDF medium density wood particle panels, matt lacquered, fine
textured (SILCOVER) or veneered with 0,6 mm thick wood veneer, with 1 mm thick wood
edge (WOOD). 45° edges on all sides. The drawer can be opened through the lower
side of the front.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 6.3
I F I U M I S T
FEASIBLE FINISHES - CABINETS
WOOD
WOOD SELECTION
I F I U M I S T WASHBASIN
FEASIBLE FINISHES - TOPS TYPOLOGIES
-
White
CORIAN®
H 20 mm
173
White
STONE - MARBLE -
A A B B B C D D E E
GRANITE
H 20 mm
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE
C C C D D D D D D D
SILESTONE®
H 20 mm
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
H 20 mm
D D D E E E E E E
L = Width
P = Depth
H = Height
Pr = Price code
6.4 01/2018
I F I U M I S T
Technical chart
400 19
400 19
a a
419
419
420
420
100 100 100 100
19 19
X
X
509 509
531
6
max.440
max.220
min.310
min.110
= Water drain
= Cold water feeder
420
420
= =
= = X = 350 mm. when top-mounted washbasins are used.
Position of water drain - “a“ 480 mm. when built-in and under-mounted washbasins are
dimension used.
(middle height to washbasin upper part = 900 mm)
400 19
176
126
420
419
420
19 19
X
509 529
619 - 919 600 - 900 619 - 919 600 - 900 600 - 900 600 - 900
531
531
2121 531
Composition example
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 6.5
F R E E Z O N E
TECHNICAL FEATURES
The doors are gripped (and opened) through the specific handle-rail, mounted on the
upper part of the cabinet.
Tops
THICKNESS: 15 - 20 - 23 mm
DEPTH: 500 mm
Carcasses
It’s made of 19 mm thick wood particle board panels , waterproof (class V100), with low
formaldehyde emission (class E1/CARB P2), treated with high performance melamine
resin. Front and back edges in ABS, same colour.
SIDE PANEL HEIGHT: 300 - 470 mm (both compatible with built-in / under-mounted /
moulded flush-mounted Boffi washbasins).
SIDE PANEL DEPTH: 470 mm.
DEPTH INCLUDING DOOR: 495 mm.
Handle-rail (compulsory)
In painted aluminium.
Colour: white / black.
THICKNESS: max 20 mm
Drawers
LEGRABOX series with side and back panels in varnished matt black metal. Bottom in
black melamine. Front of internal drawers in same finish as carcass.
Finished front panel mounted on AMX frame in black anodised aluminium. Thickness
18÷23 mm (nominal).
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 7.3
F R E E Z O N E CARCASSES MELA-
FEASIBLE FINISHES - CABINETS MINE-COATED
130 608 606
Silk white Grey-graphite Elm wood
oak (open- (open-pore
pore effect) effect)
SILCOVER
ECOLAK
510 129 513 024 512 025 023 515 517 027
Arctic white Magnolia Cloud colour Pebble grey Oat colour Ècru Mud Basalt grey Charcoal Black
WOOD
7 POLYESTER
003 129 005 024 063 106 004 007 001 027
White Magnolia Grey RAL Pebble grey Sand Sahara Grey Dark green Andalusian red Black
7038
METALS
WOOD SELECTION
CORIAN®
173
White
WOOD 3D
048 100
Core walnut Black eco-
wood
GLASS
SOLID WOOD
058 057
Canaletto Old grey
LIGHT walnut pinewood
“sawn-effect“
SOLID WOOD 3D
058
Canaletto
LIGHT walnut
“sawn-effect“
L = Width
P = Depth
H = Height
Pr = Price code
7.4 01/2018
F R E E Z O N E CARCASSES MELA-
FEASIBLE FINISHES - CABINETS MINE-COATED
130 608 606
Silk white Grey-graphite Elm wood
oak (open- (open-pore
pore effect) effect)
077
Abonos oak
ALUMINIUM
382 381
Steel Dark
DE CASTELLI METALS
A A B B B B
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 7.5
F R E E Z O N E WASHBASIN
FEASIBLE FINISHES - TOPS TYPOLOGY
-
White
LASERMAT
H 20 mm
CORIAN®
H 20 mm
173
White
STONE - MARBLE -
A A B B B C D D E E
GRANITE
H 20 mm
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
7 COMPOSITE C C C D D D D D D D
SILESTONE®
H 20 mm
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE
D D D E E E E E E
DEKTON®
H 20 mm
455 452 453 454 456 451 457 458 459
Edora beige Kadum brown Sirius black Zenith white Irok beige Strato grey Ventus grey Korus grey Galema brown
SOLID WOOD
H 23 mm
058 057
Canaletto Old grey
LIGHT walnut pinewood
“sawn-effect“
L = Width
P = Depth
H = Height
Pr = Price code
7.6 01/2018
F R E E Z O N E
Technical chart
12-15-20
32
300
266
436
470
a a
X
300 - 450 - 600 300 - 450 - 600
900 - 1200 600 - 900 - 1200 600 - 900 - 1200 900 -1200 1200
498
500
470
7
23
max.235
min.288
max.385
min.155
50
50
300
300
266
266
= =
= =
max.235
max.235
min.155
min.155
min.288
min.288
max.385
max.385
50
50
50
50
470
470
470
470
436
436
436
436
= = = = = = = =
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 7.7
F R E E Z O N E
Technical chart
12 - 15 - 20
32
470
436
470
a a a
260
X
1200 - 1500 - 1800 1200 - 1500 - 1800 1200 - 1500 - 1800
2100 - 2400 2100 - 2400 2100 - 2400
495
500
470
7
23
min.288
max.385
50
50
470
470
436
436
= = = =
L = Width
P = Depth
H = Height
Pr = Price code
7.8 01/2018
F R E E Z O N E
TECHNICAL DETAILS
32
32
500 500
32
32
470
470
436
436
300
300
266
266
470 23 470 23 470 23 470 23
495 495 495 495
Base unit for washbasin with single front and double drawer (1 shaped)
32
32
300
300
266
266
7
23 470 470 23
A’ B’
495 495
32
470
470
436
436
23 470 C’ D’ 470 23
495 495
32
149
470
470
436
436
206
470 23 470 23
495 495
900 / 1200
600
149 149
206 206
cassetto opzionale
261/411 301 261/411 optional drawer
19 19 19 19 tiroir optionnel
optionale Schublade
cajón opcional
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 7.9
F R E E Z O N E
TECHNICAL DETAILS
Base units
SECTION A-A' SECTION B-B'
1200
500 A 500
B
32
32
470
470
436
436
23 470 A’ B’ 470 23
495 495
32
470
470
436
436
7
23 470 C’ D’ 470 23
495 495
32
470
470
436
436
23 470 E’ F’ 470 23
495 495
HANDLE-RAIL
* For technical reasons the thickness of the handle rail covering (optional) varies according to the FINISH. The maximum thickness is 20 mm, to allow for the opening of
the door front.
L = Width
P = Depth
H = Height
Pr = Price code
7.10 01/2018
F R E E Z O N E TOP-MOUNTED washbasins BUILT-IN washbasins - UN-
COMPOSITIONS - COMPATIBLE WASHBASINS DER-MOUNTED washbasins
WXCHAE02 - WXCHAE04
WXCHAE01 - WXCHAE03
of the under-washbasin unit.
W2KPAJ001
Adda Corian®
WRUNAB03
WRUNAB02
WBGAAE01
WRGBAE01
WRGBAE02
WNADAE01
WRAQAE02
WRCDAB01
WRSBAC01
A45 Compact
WRSBAB02
WAPTAB01
WAPTAB02
WRAFAE01
WRSBAF01
WRLSAE01
WRICAE01
Fisher Island
Sabbia BTM
WRSBAB01
Cathino 3
Cathino 1
Sabbia 3
Garden
Iceland
Sidel 2
Gobi 1
Gobi 2
Lotus
Compatible with wall-mounted spout / top-mounted spout positioned behind or laterally
Compatible with wall-mounted spout or top-mounted spout positioned laterally
Compatible with wall-mounted spout
Compatible with wall-mounted spout or top-mounted spout positioned behind.
Composizione (Composition) 1A
Composizione (Composition) 2A
Composizione (Composition) 3A
Composizione (Composition) 4A
Composizione (Composition) 5A
Composizione (Composition) 6A
Composizione (Composition) 7A
Composizione (Composition) 8A
7 Composizione (Composition) 9A
Composizione (Composition) 10A
Composizione (Composition) 1B
Composizione (Composition) 2B
Composizione (Composition) 3B
Composizione (Composition) 4B
Composizione (Composition) 5B
Composizione (Composition) 6B
Composizione (Composition) 7B
Composizione (Composition) 8B
Composizione (Composition) 9B
Composizione (Composition) 10B
Composizione (Composition) 1C
Composizione (Composition) 2C
Composizione (Composition) 3C
Composizione (Composition) 4C
Composizione (Composition) 5C
219,3 223,5
Pr * 70,1 117,2 84,2 54,4 87,1 52,4 43,9 142,1 86,2 98,0 74,3 55,8 78,2 62,4 72,0 82,8 64,5 231,5 235,8 70,0
* The price of the GARDEN washbasin changes according to the finish of the internal bottom cover: please see "Washbasins" chapter.
7.22 01/2018
W O O D - I N
TECHNICAL FEATURES
Type A: front panels assembled "WITHOUT FINGER JOINT TECHNIQUE", with LEGRABOX drawers.
Finished suspended monobloc base units, with drawers and open-faced compartments.
Top (optional)
The monobloc WOOD-IN base units can be equipped with top-mounted washbasins
installed directly on them.
Alternatively is possible to use the OPTIONAL square-edged top with reduced depth
480 mm.
Carcasses
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 8.3
W O O D - I N
TECHNICAL FEATURES
Type B: front panels assembled "WITH FINGER JOINT TECHNIQUE", with WOOD drawers.
Suspended monobloc base units totally in wood, with drawers and open-faced com-
partments.
Exclusive drawers assembled with finger joint technique and push opening system
TIP-ON.
Top (optional)
The monobloc WOOD-IN base units can be equipped with top-mounted washbasins
installed directly on them.
Alternatively is possible to use the OPTIONAL square-edged top with reduced depth
480 mm.
Carcasses
Totally made of 22 mm thick multi-layer wood panels, veneered with very thick wood
veneer, with wood edge.
Visible perimeter edge.
Drawers TIP-ON
Drawers made of 16 mm thick multi-layer wood structure, veneered with very thick
sheets,edges in wood. Push opening system TIP-ON.
Drawer front panels with horizontal grain.
L = Width
P = Depth
H = Height
Pr = Price code
8.4 01/2018
W O O D - I N WASHBASIN
FEASIBLE FINISHES - CABINETS WITH FRONT PANELS ASSEMBLED WITHOUT FINGER JOINT TECHNIQUE (Type A) TYPOLOGIES
WOOD
WOOD SELECTION
WOOD EXCLUSIVE
077
Abonos oak
W O O D - I N WASHBASIN
FEASIBLE FINISHES - CABINETS WITH FRONT PANELS ASSEMBLED WITH FINGER JOINT TECHNIQUE (Type B) TYPOLOGIES
WOOD ASSEMBLED
WITH FINGER JOINT
TECHNIQUE
093
Canaletto
walnut U.S.
WOOD ASSEMBLED
WITH FINGER JOINT
TECHNIQUE
077
Abonos oak
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 8.5
W O O D - I N WASHBASIN
FEASIBLE FINISHES - TOPS FOR GARDEN WASHBASIN TYPOLOGIES
The top-mounted washbasins of the Boffi range can be mounted on the monobloc units (without top). TOP-MOUNTED
GARDEN
ATTENTION !!! - OPTIONAL top, arranged for GARDEN washbasin only.
CORIAN®
H 12 mm
173
White
* Because of technical reasons, the top in Stone / Marble / Granite with double washbasin is 20 mm thick and not 10 mm.
8
W O O D - I N WASHBASIN
FEASIBLE FINISHES - TOPS TYPOLOGIES
The top-mounted washbasins of the Boffi range can be mounted on the monobloc units (without top). TOP-
MOUNTED
ATTENZIONE !!! - OPTIONAL top.
CRISTALPLANT®
H 15 mm
-
White
STONE - MARBLE -
A A B B B C D D E E
GRANITE
H 20 mm
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE
C C C D D D D D D D
SILESTONE®
H 20 mm
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE
D D D E E E E E E
DEKTON®
H 20 mm
455 452 453 454 456 451 457 458 459
Edora beige Kadum brown Sirius black Zenith white Irok beige Strato grey Ventus grey Korus grey Galema brown
L = Width
P = Depth
H = Height
Pr = Price code
8.6 01/2018
W O O D - I N
TECHNICAL DETAILS
12-15-20
10-12-20
a a a
490
490
490
100 100 100 100 100 100
X
X
861 861 561 1161 561
905 1488 1178
500
500
500
= =
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 8.7
W O O D - I N
Technical chart
CABINETS WITH FRONT PANELS ASSEMBLED WITHOUT FINGER JOINT TECHNIQUE (Type A)
L 905 mm
861
BWANZ090WS
L 1188 mm
561 561 561 561 861 256
L 1205 mm
1161
BWANZ120WS
L 1488 mm
861 561 861 561
BWAMU150WS BWAMT150WS
L 1788 mm
861 861 861 861 1161 561
8
BWAMU180WS BWAMR180WS
CABINETS WITH FRONT PANELS ASSEMBLED WITH FINGER JOINT TECHNIQUE (Type B)
L 905 mm
861
BWANZ090WS
L 1188 mm
561 561 561 561 861 256
L 1205 mm
1161
BWANZ120W
L 1488 mm
861 561 861 561
BWAMU150W BWAMT150W
L 1788 mm
861 861 861 861 1161 561
BWAMU180W BWAMR180W
L = Width
P = Depth
H = Height
Pr = Price code
8.8 01/2018
W O O D - I N
TECHNICAL DETAILS - CABINETS WITH FRONT PANELS ASSEMBLED WITHOUT FINGER JOINT TECHNIQUE (Type A)
8 - Monobloc base unit for washbasin with 4 drawers (1 shaped upper drawer) BWAMQ180WS S
400 400
208
208
490
490
400 400
208
208
1788
E F
G G’
8
490
E’ F’
SECTION G-G'
H H’
70
374
374
78
2 2 2 2
22 22 22
861 861
SECTION H-H'
490
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 8.9
W O O D - I N
TECHNICAL DETAILS - CABINETS WITH FRONT PANELS ASSEMBLED WITH FINGER JOINT TECHNIQUE (Type B)
8 - Monobloc base unit for washbasin with 4 drawers (1 shaped upper drawer) BWAMQ180W S
400
400
208
208
490
490
400
400
208
208
1788
A B
C C’
8
490
A’ B’
D D’
70
374
374
134
2 2 2 2
22 22 22
861 861
SECTION D-D'
490
L = Width
P = Depth
H = Height
Pr = Price code
8.10 01/2018
8
W O O D - I N
MONOBLOC BASE UNITS
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 8.11
W O O D - I N TOP-MOUNTED washbasins
MONOBLOC BASE UNITS - COMPATIBLE WASHBASINS
WRAQAE01 - WMAQAE01
WXCHAE02 - WXCHAE04
WXCHAE01 - WXCHAE03
• The washbasin position is centred according to the middle part of the under-washbasin unit.
• If the taps are mounted on the top, please add the tap cut-outs. The indicated compatibility is referred to
spouts with or without integrated mixer.
WRAQAE02
WBGAAE01
WRGBAE01
WRGBAE02
A45 Compact
WRSBAC01
WRAFAE01
WRLSAE01
WRICAE01
Fisher Island
Cathino 3
Cathino 1
Sabbia 3
Garden
Iceland
Gobi 1
Gobi 2
Lotus
Compatible with wall-mounted spout / top-mounted spout positioned behind or laterally
Compatible with wall-mounted spout or top-mounted spout positioned laterally
Compatible with wall-mounted spout
Compatible with wall-mounted spout or top-mounted spout positioned behind.
* The price of the GARDEN washbasin changes according to the finish of the internal bottom cover: please see "Washbasins" chapter.
L = Width
P = Depth
H = Height
Pr = Price code
8.12 01/2018
D U E C
TECHNICAL FEATURES
Open-faced unit
Washbasin element
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 9.3
D U E C
TECHNICAL DETAILS
688
244
100 100
100 50
47 269
450 438
338
1100
12 488 600
256
300
9
600 500
1800
300
2376
300
min 310
100 100 max 370
100
= =
Water drain
L = Width
P = Depth
H = Height
Pr = Price code
9.4 01/2018
U P P E R
TECHNICAL FEATURES
Modular system composed of open-faced units, which can be mounted on wall (also
suspended) or on top.
If the Upper units are mounted on the top, a specific finished basement is supplied.
UNIT FINISHES
10
BASEMENT FINISHES (between top and units)
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 10.3
U P P E R
Technical chart
OPEN-FACED UNITS
400
400
400
625
225
600÷625
320÷440
275÷335
600÷625 600÷625
400
400
625
225
900÷925 - 1200÷1225
320÷440
275÷335
900÷925 - 1200÷1225 900÷925 - 1200÷1225
10
400
400
400
625
225
600÷625
320÷440
275÷335
600÷625 600÷625
400
400
625
225
900÷925 - 1200÷1225
320÷440
275÷335
L = Width
P = Depth
H = Height
Pr = Price code
10.4 01/2018
U P P E R
NOTE TO DESIGNER
H3
400
H2
H
H1
LEGEND:
10
HEIGHTS H1:
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 10.5
U P P E R
NOTE TO DESIGNER
SINGLE USE
20 20
L1
L2 LP
L = L2 + LP
L1 = L - 40
20
L1
10
L2
L = L2
L1 = L - 20
20
L1
L2 LP
L = L2 + LP
L1 = L - 20
LEGEND:
L = unit length
L1 = basement length
L2 = base unit length
LP = panel thickness
L = Width
P = Depth
H = Height
Pr = Price code
10.6 01/2018
M o n o b l o c u n i t s
Polyester / Metals /
Wood·Exclusive /
Wood·Selection
Solid·wood
Corian®
Silcover
Ecolak
Wood
B15 - (Design Norbert Wangen - 2008) • Washbasin top and one side panel in marble.
• Base unit for washbasin with finished side panel and finished drawer front panels.
50 • On the order please specify the handle-rail colour: white or black.
• LEGRABOX drawers, compatible with P 372 mm deep DOMESTICI / ONDA accesso-
ries.
• Washbasin without overflow, with chromium-plated siphon and waste drain and marble
900
plug.
• Please order separately the tap holes, if necessary.
• Drawn=right (D), mirrored=left (S)
50
300 400
95
240
450
325
210
30
30 535 135
700
L P H
White Carrara marble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 450 900 WMNWMB03 S-D
Black Marquinia marble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 450 900 WMNWMB04 S-D
Polyester / Metals /
Wood·Exclusive /
11
Wood·Selection
Solid·wood
Silcover
Ecolak
Wood
B15C - (Design Norbert Wangen - 2011) • Washbasin top and one side panel in Cristalplant®.
• Base unit for washbasin with finished side panel and finished drawer front panels.
700
• AVAILABLE VERSION WITH SIDE PANEL POSITIONED ON RIGHT ONLY.
• On the order please specify the handle-rail colour: white or black.
50
50 505
338
67,5
100 100
270
370
67,5
50 576 70
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 505 900 WRNWMB01
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 11.3
M o n o b l o c u n i t s
Silcover
QUADTWO - (Design Jeffrey Bernett - 2012) • Base unit for washbasin in Silcover, colours of Boffi range.
• Top in white Cristalplant®, visible thickness: 5 mm (total thickness: 15 mm).
900
• Integrated washbasin: Universal small WRUNAB03.
500
900 600 300 • LEGRABOX drawers.
• Opening of the lateral drawer: grabbing the lower part of the drawer front panel.
250 • Opening of the under-washbasin drawer: push opening system TIP-ON.
• Please order separately the tap holes, if necessary.
240/300
300/360
• Y = 900 mm (suggested).
• Drawn=right (D), mirrored=left (S).
605 100 100 • Compatible siphon (to be ordered separately): ANBM002 chromium-plated /
Y
ANBM006 stainless steel / ANBM016 grey PVD.
605
• Compatible waste drain (to be ordered separately): ANBN001 chromium-plated /
ANHG001 + ANDR002 stainless steel.
L P H
..................................................................................... 900 500 605 WRQTMB01 S-D
11
L = Width
P = Depth
H = Height
Pr = Price code
11.4 01/2018
C o m p l e m e n t a r y f u r n i t u r e
Programma TREVES
TECHNICAL FEATURES
(Design Piero Lissoni - 2010)
Open-faced wall units, with door or frame door + mirror. Push opening system
TIP-ON.
Carcasses
Produced with 14 mm thick wood particle boards, waterproof (class V100), with low
formaldehyde emission (class E1), treated with high performance melamine resin.
Assembled using the 45° folding technique.
FINISHES: external part and frontal trim in matt white, internal part and shelves in
thermo-treated larch wood, textured finish.
Doors
Made of 14 mm thick woody ultra light panel, with push opening system TIP-ON.
FINISHES: Silcover.
Frame doors
In aluminium, th. 14 mm, with mirrored glass. Push opening system TIP-ON.
12
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 12.3
C o m p l e m e n t a r y f u r n i t u r e
Programma TREVES
Technical chart
(Design Piero Lissoni - 2010)
900
600
300
300 300 300
150
220
900
600
300
WITH DOOR
6
900
600
300
L = Width
P = Depth
H = Height
Pr = Price code
12.4 01/2018
C o m p l e m e n t a r y f u r n i t u r e
Programma TREVES
(Design Piero Lissoni - 2010)
Pr
Open-faced wall unit - L 300 mm • Horizontal or vertical assembly possible.
• Melamine-coated shelves.
• CUSTOMISATIONS ARE NOT AVAILABLE.
900
600
300
L P H
................................................................................... 300 150 300 PKIBK030N
................................................................................... 300 150 600 PBIBK030N
................................................................................... 300 150 900 PRIBK030N
L P H
................................................................................... 300 167 300 PKJCR030N
12
................................................................................... 300 167 600 PBJCR030N
................................................................................... 300 167 900 PRJCR030N
Wall unit with frame door - L 300 mm • Frame door in black anodised aluminium with mirror.
• Without handle, with push opening system TIP-ON.
• During assembly it’s possible to choose right or left opening.
• Melamine-coated shelves.
• CUSTOMISATIONS ARE NOT AVAILABLE.
900
600
300
L P H
................................................................................... 300 167 300 PKJCT030N
................................................................................... 300 167 600 PBJCT030N
................................................................................... 300 167 900 PRJCT030N
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 12.5
C o m p l e m e n t a r y f u r n i t u r e
GLASS
Technical chart
(Design Piero Lissoni - 2001)
400
200 200
1200
A B
800
200 200
200 200
200
12 400 200
200
800 200
A B
15 6 L
6
6 35
51
30 30
45 H
L = Width
P = Depth
H = Height
Pr = Price code
12.6 01/2018
C o m p l e m e n t a r y f u r n i t u r e
GLASS
(Design Piero Lissoni - 2001)
Open-faced wall units in transparent tempered glass. Back panel in painted glass: white, grey, black, red, mirror.
Pr
Open-faced wall unit - 1 compartment • CUSTOMISATIONS ARE NOT AVAILABLE.
• On the order please specify the back panel colour: white, grey, black, red, mirror.
200
200 400
L P H
................................................................................... 400 200 200 PLCMA040N
200
800
200
L P H
................................................................................... 800 200 200 PLCMA080N
400
200 200
L P H
................................................................................... 200 200 400 PPCMA020N
800
200 200
L P H
................................................................................... 200 200 800 PECMA020N
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 12.7
C o m p l e m e n t a r y f u r n i t u r e
GLASS
(Design Piero Lissoni - 2001)
Open-faced wall units in transparent tempered glass. Back panel in painted glass: white, grey, black, red, mirror.
Pr
Open-faced wall unit - 6 compartments • CUSTOMISATIONS ARE NOT AVAILABLE.
• On the order please specify the back panel colour: white, grey, black, red, mirror.
1200
200 200
L P H
................................................................................... 200 200 1200 PJCMA020N
12
L = Width
P = Depth
H = Height
Pr = Price code
12.8 01/2018
C o m p l e m e n t a r y f u r n i t u r e
Wood·Selection
External parts of carcass are in finish. 16 mm thick door with push opening system TIP-ON.
Silcover
Wood
wood
Suspended base unit with drawer + internal drawer • Melamine-coated internal part of carcass.
• LEGRABOX drawers.
8 • Drawers compatible with DOMESTICI / ONDA accessories: please use P 372 mm deep ac-
8 cessories.
• CUSTOMISATIONS ARE NOT AVAILABLE.
• Wood / Wood Selection / Solid wood: horizontal grain.
• Internal drawer front panel in black melamine.
• ABONOS OAK: upon request the cabinet can be finished in Silcover with front panel in Abonos
Oak solid wood. To price this option please consider the cost of the drawer unit in Silcover with
front panel in solid wood +30%.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 616 500 350 BNCPU060FL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 916 500 350 BNCPU090FL
12
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 12.9
C o m p l e m e n t a r y f u r n i t u r e
PIANURA units
(Design Monica Armani - 2011)
Wood·Exclusive
Wood·Selection
Finished units with 70 mm thick door, with push opening system TIP-ON
SILCOVER: all range colours.
Silcover
WOOD: Oak, grey graphite oak, Ash grey oak ONLY.
Wood
WOOD SELECTION: Core walnut ONLY, Canaletto walnut U.S. and smoked Oak.
LEGNO EXCLUSIVE: Abonos Oak.
Suspended tall unit with shelves and hinged door • Door with mirror on internal side.
• 6 shelves in black anodised aluminium, fitted with black anti-slip mat.
• CUSTOMISATIONS ARE NOT AVAILABLE.
70
180
349 350
2
701
L P H
.......................................................... 350 252 1600 CBDBS035S S-D 135,4 191,3 219,0
12
70
700
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 594 380 BPBPQ070S 94,8 183,2 209,7
Pr
Additional internal shelf • For PIANURA tall unit.
• Black anodised aluminium, fitted with black anti-slip mat.
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 180 30 ACCE005
L = Width
P = Depth
H = Height
Pr = Price code
12.10 01/2018
C o m p l e m e n t a r y f u r n i t u r e
OTHELLO
(Design Nendo - 2011)
Pr
Wall unit • 3 compartments in white Corian® , 6 mm thick.
• 2 doors with two sides, 4 mm thick mirror (A) / white Corian® (B). 180° opening.
• CUSTOMISATIONS ARE NOT AVAILABLE.
B
A
900
200
A A B B B A
300
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 200 300 PKMDK090N
12
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 12.11
C o m p l e m e n t a r y f u r n i t u r e
ZONE wall units
Lasermat / Silcover
Polyester / Metals /
Wood·Exclusive
Wood·Selection
Compulsory handle. Mirror finish: the handle is integrated in the aluminium frame.
The socket cut-out under the wall unit has to be ordered separately (please see “Customised solutions“ chapter).
Ecolak
Wood
Mirror
Wall unit - H 600 mm • 2 melamine-coated shelves.
230
L
600
L P H
........................................................ 1200 230 600 PBMMB120N
........................................................ 1500 230 600 PBMMB150N
........................................................ 1800 230 600 PBMMB180N
........................................................ 2100 230 600 PBMMB210N
........................................................ 2400 230 600 PBMMB240N
230
900
12 L P H
........................................................ 1200 230 900 PRMMB120N
........................................................ 1500 230 900 PRMMB150N
........................................................ 1800 230 900 PRMMB180N
........................................................ 2100 230 900 PRMMB210N
........................................................ 2400 230 900 PRMMB240N
230
1200
L P H
........................................................ 1200 230 1200 PJMMB120N
........................................................ 1500 230 1200 PJMMB150N
........................................................ 1800 230 1200 PJMMB180N
........................................................ 2100 230 1200 PJMMB210N
........................................................ 2400 230 1200 PJMMB240N
L = Width
P = Depth
H = Height
Pr = Price code
12.12 01/2018
A c c e s s o r i e s f o r c a b i n e t s
INTERNAL DRAWERS
Pr
LEGRABOX internal drawer. - H 105 mm. • Compatible ONLY with Programma STANDARD, SIMPLE tall units with hinged
doors.
• Bottom and back side in black melamine. Lateral sides in black metal.
• Melamine-coated front panel in same finish as carcass.
L P H
For L 300 - P 345 mm tall unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 270 105 AADX041
For L 450 - P 345 mm tall unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 270 105 AADX042
For L 600 - P 345 mm tall unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 270 105 AADX043
LEGRABOX internal drawer. - H 105 mm. • Compatible ONLY with Programma STANDARD, SIMPLE, FREE ZONE, B14 base
units with hinged doors.
• Bottom and back side in black melamine. Lateral sides in black metal.
• Melamine-coated front panel in same finish as carcass.
• Compatible internal accessories: P 372 mm (L 300 drawer excluded).
L P H
For L 300 - P 495 mm base unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 400 105 AADX021
For L 450 - P 495 mm base unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 400 105 AADX022
For L 600 - P 495 mm base unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 400 105 AADX023
13
LEGRABOX internal drawer. - H 105 mm. • For compartment of under-washbasin base unit.
• Compatible ONLY with Programma STANDARD, SIMPLE and FREE ZONE base
units for washbasin with hinged doors.
• Bottom and back side in black melamine. Lateral sides in black metal with upper
small bar.
• Melamine-coated front panel in same finish as carcass.
• Please order one drawer each compartment.
L P H
For L 261 mm compartment (L 900 mm base unit).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 400 105 AADX061
For L 411 mm compartment (L 1200 mm base unit).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 400 105 AADX062
LEGRABOX internal drawer. - H 190 mm. • For compartment of under-washbasin base unit.
• Compatible ONLY with B14 under-washbasin base units with hinged doors.
• Bottom and back side in black melamine. Lateral sides in black metal with upper
small bar.
• Melamine-coated front panel in same finish as carcass.
• Please order one drawer each compartment.
L P H
For L 261 mm compartment (L 900 mm base unit).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 400 190 AADX026
For L 411 mm compartment (L 1200 mm base unit).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 400 190 AADX027
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 13.3
A c c e s s o r i e s f o r c a b i n e t s
COVERING PLATES - VARIOUS ACCESSORIES
Pr
Covering plate. • Aluminium.
• To be ordered when the siphon connection cut-out on the unit is not used.
L P H
................................................................................... 180 375 2 AVMT023
13
L = Width
P = Depth
H = Height
Pr = Price code
13.4 01/2018
A c c e s s o r i e s f o r c a b i n e t s
FOR INTERNAL SPACE OF DRAWERS - DOMESTICI series
Accessories in black-dyed ash wood, for LEGRABOX / WOOD-IN drawers (not compatible with aluminium drawers). For base units P 475 / 495 / 500 / 530 / 594.
IMPORTANT :
the DOMESTICI accessories are laid inside the drawer. Each drawer can accommodate accessory compositions to obtain the maximum width “L”, indicated in the Technical
chart of inside useful sizes.
Technical chart of inside useful sizes LEGRABOX drawers/heavy-duty drawers (internal too).
374
374
374
450 600 900 1200
13
92 167 317 467
374
374
374
374
78
78
78
78
374
374
134
134
134
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 13.5
A c c e s s o r i e s f o r c a b i n e t s
FOR INTERNAL SPACE OF DRAWERS - DOMESTICI series
Accessories in black-dyed ash wood, for LEGRABOX / WOOD-IN drawers (not compatible with aluminium drawers). For base units P 475 / 495 / 500 / 530 / 594.
Pr
DOMESTICI - Divider. • For drawer of L 450/600 mm base units.
• * = internal compartment compatible with accessories A-B-C.
*
372
218
L P H
................................................................................... 218 372 50 AAHI005
DOMESTICI - Divider with compartment for eye liner. • For drawer of L 450/600 mm base units.
372
218
L P H
................................................................................... 218 372 50 AAHJ007
DOMESTICI - Divider with compartment for nail varnishes. • For drawer of L 450/600 mm base units.
372
218
L P H
13
................................................................................... 218 372 50 AAHJ008
218
L P H
................................................................................... 218 372 50 AAHK003
518
L P H
................................................................................... 518 372 50 AAHI006
L = Width
P = Depth
H = Height
Pr = Price code
13.6 01/2018
A c c e s s o r i e s f o r c a b i n e t s
FOR INTERNAL SPACE OF DRAWERS - DOMESTICI series
Accessories in black-dyed ash wood, for LEGRABOX / WOOD-IN drawers (not compatible with aluminium drawers). For base units P 475 / 495 / 500 / 530 / 594.
Pr
DOMESTICI - Equipped divider. • For drawer of L 900/1200 mm base units.
• Not compatible with drawer of under-washbasin base units.
372
518
L P H
................................................................................... 518 372 50 AAHJ009
127
L P H
................................................................................... 127 226 63 AAHL001
127
L P H
13
................................................................................... 127 226 133 AAHL002
DOMESTICI - C - Box with cover and internal division. • To be laid inside heavy-duty drawers only.
130
133
226
127
L P H
................................................................................... 127 226 133 AAHL003
372
L P H
................................................................................... 300 372 130 AAHM001
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 13.7
A c c e s s o r i e s f o r c a b i n e t s
FOR INTERNAL SPACE OF DRAWERS - DOMESTICI series
Accessories in black-dyed ash wood, for LEGRABOX / WOOD-IN drawers (not compatible with aluminium drawers). For base units P 475 / 495 / 500 / 530 / 594.
Pr
DOMESTICI - F - Box with Kleenex tissue-holder. • To be laid inside.
372
266 80
L P H
................................................................................... 266 372 80 AAHM002
278 123
L P H
................................................................................... 278 372 123 AAHL005
13
L = Width
P = Depth
H = Height
Pr = Price code
13.8 01/2018
A c c e s s o r i e s f o r c a b i n e t s
FOR INTERNAL SPACE OF DRAWERS - ONDA series
Accessories in plastic, matt finish, for LEGRABOX / WOOD-IN drawers (not compatible with aluminium drawers). For base units P 475 / 495 / 500 / 530 / 594.
Colour: grey.
IMPORTANT :
the ONDA accessories are laid inside the drawer. Each drawer can accommodate accessory compositions to obtain the maximum width “L”, indicated in the Technical
chart of inside useful sizes.
Technical chart of inside useful sizes LEGRABOX drawers/heavy-duty drawers (internal too).
374
374
374
450 600 900 1200
13
92 167 317 467
374
374
374
374
78
78
78
78
374
374
134
134
134
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 13.9
A c c e s s o r i e s f o r c a b i n e t s
FOR INTERNAL SPACE OF DRAWERS - ONDA series
Accessories in plastic, matt finish, for LEGRABOX / WOOD-IN drawers (not compatible with aluminium drawers). For base units P 475 / 495 / 500 / 530 / 594.
Colour: grey.
Pr
ONDA - Accessories set - A. • It includes: tray with 3 removable small boxes with lid + grid that can
be equipped with cosmetic holder + Kleenex tissue holder.
• H max 90 mm.
90
L
372
L P H
L = min 412 mm / max 482 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 372 90 AAHS003
ONDA - Accessories set - B. • It includes: tray with 3 removable small boxes with lid + grid that can
be equipped with cosmetic holder.
• H max 69 mm.
69
372 L
L P H
L = min 288 mm / max 378 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 372 69 AAHS004
ONDA - Side storage tray - C. • It includes: 3 removable small boxes with lid.
69
372
122
L P H
13 ................................................................................... 122 372 69 AAHU002
84
372 232
L P H
................................................................................... 232 372 84 AAHU003
L = Width
P = Depth
H = Height
Pr = Price code
13.10 01/2018
P a n e l s
Melamine
MELAMINE-COATED panel. • H min 50 mm, max 1200 mm.
• L min 50 mm, max 2780 mm (Elm wood 2730 mm).
• Order minimal surface for single panel: 0,5 m².
max 1200
max 2780 19
L P H
Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 19 - SBAXNN15
Metals / Polyester
Lasermat
Silcover
Ecolak
FINISHED panel. • H min 50 mm, max 1200 mm.
• L min 50 mm, max 3000 mm.
max 1200
max 3000 23
L P H
Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 23 - SBAYNT03
14
Corian®
max 3000 23
L P H
Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 23 - SAARNN03
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 14.3
P a n e l s
Wood·Exclusive
Wood·Selection
The price of surfaces smaller than 0,1 m², is fixed and it’s the same as the price of 0,1 m² surface (EXCEPT MELAMINE-COATED PANELS: minimum
0,5 m²).
Wood
Panel in veneer WOOD. • H min 50 mm, max 2900 mm.
• L min 50 mm, max 1200 mm.
max 2900
max 1200 23
L P H
Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 23 - SBACBA03
Wood·3D
Panel in veneer WOOD 3D. • Plank-effect, alternating thickness 20 and 23 mm.
• H min 50 mm, max 2750 mm.
• L min 50 mm, max 1260 mm.
max 2750
max 1260 23
L P H
Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - SBACBC04
14
Solid·wood
Panel in SOLID WOOD (23 mm thick). • H min 50 mm, max 2420 mm.
• L min 50 mm, max 1260 mm.
max 2420
max 1260 23
L P H
For surfaces from 0,1 a 0,3 m² - Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 23 - SBAFBA04
For surfaces from 0,3 a 0,6 m² - Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 23 - SBAFBA05
For surfaces more than 0,6 m² - Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 23 - SBAFBA06
L = Width
P = Depth
H = Height
Pr = Price code
14.4 01/2018
P a n e l s
Solid·wood·3D
Panel in SOLID WOOD 3D (20 / 23 mm thick). • Planks, alternating thickness 20 and 23 mm.
• H min 50 mm, max 2420 mm.
• L min 50 mm, max 1260 mm.
max 2420
max 1260 23
L P H
For surfaces from 0,1 a 0,3 m² - Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 23 - SBAFBA07
For surfaces from 0,3 a 0,6 m² - Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 23 - SBAFBA08
For surfaces more than 0,6 m² - Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 23 - SBAFBA09
14
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 14.5
B a c k p a n e l s
Wood·Exclusive
Wood·Selection
The price of surfaces smaller than 0,1 m², is fixed and it’s the same as the price of 0,1 m² surface.
Wood
Back panel in veneer WOOD. • Vertical grain.
• Arranged for wall fixing.
• H min 181 mm, max 2900 mm.
• L min 300 mm, max 1200 mm.
181 ÷ 2900
300 ÷ 1200 19
L P H
Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 19 - SIACBA03
Glass
Back panel in GLASS. • Aluminium frame, stainless steel, white or black finish.
• H min 180 mm, max 1200 mm.
• L min 300 mm, max 2400 mm.
1,5
180 ÷ 1200
4
300 ÷ 2400
23
L P H
Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 23 - SIBHNN02
14
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Back panel in STONE, MARBLE, GRANITE, COMPOSITE. • Please see the price categories and dimensional limits on THE GENERAL TECHNICAL PART
(INFO).
• Polished finish is available upon request, with a price increase. See chapter “CUSTOMISED
SOLUTIONS“.
H • H min 180 mm.
• L min 350 mm.
L 20
L P H
Price per square metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 20 - SPBENN01
L = Width
P = Depth
H = Height
Pr = Price code
14.6 01/2018
B a c k - s p l a s h e s
Cristalplant®
Back-splash in CRISTALPLANT®. • H min 50 mm, max 180 mm.
• L min 50 mm, max 2900 mm.
50 ÷ 180
50 ÷ 2900 15
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 15 - SOBXNN01
Corian®
Back-splash in CORIAN®. • H min 50 mm, max 180 mm.
• L min 50 mm, max 3650 mm.
50 ÷ 180
50 ÷ 3650 19
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 19 - SOARNN02
14
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Back-splash in STONE, MARBLE, GRANITE, COMPOSITE. • H min 50 mm, max 180 mm.
• L min 350 mm.
H
L 19
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 20 - SOBENN02
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 14.7
S h e l v e s
Polyester / Metals /
Price per linear metre.
Wood·Exclusive /
Wood·Selection
Each shelf should be equipped with the specific supporting hardware cod. AMFE004 / AMFE005.
Please check always the feasibility of shelves that exceed the size limits indicated in the price list. Costs and delivery times
Solid·wood
Lasermat
are evaluated and communicated each time, in relation to individual case.
Silcover
Ecolak
Wood
Shelf IN SAME FINISH AS DOORS / TOPS. • L max 2700 mm.
• LASERMAT > Laser welded edge.
Lasermat • H 60 mm: made of honeycomb board (Solid wood excluded).
• H 60 mm: not available for back panels.
40
• The ”old” solid pinewood can be, over time, altered (cracks and possible retractions of the
same slats due to temperature and humidity change), result of possible wood natural change
caused by time. The above mentioned characteristics shall not be considered cause of com-
plaint.
Legno massello
40 / 60
Solid wood
Altre finiture
40
Other finishing
Altre finiture
Other finishing
60
L P H
Thickness: 40 mm
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 200 40 MAETB5
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 320 40 MAEVB5
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 340 40 MAEZB5
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 350 40 MAEBB5
Thickness: 60 mm
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 200 60 MAFTB5
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 320 60 MAFVB5
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 340 60 MAFZB5
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 350 60 MAFBB5
14
Corian®
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 200 40 MRETB5
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 320 40 MREVB5
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 340 40 MREZB5
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 350 40 MREBB5
L = Width
P = Depth
H = Height
Pr = Price code
14.8 01/2018
S h e l v e s
Accessories
Pr
Pair of concealed pins for shelf support • Ø 12 mm.
• Cut-out included.
L P H
..................................................................................... - 200 - AMFE004
L P H
..................................................................................... - 200 - AMFE005
14
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 14.9
S u s p e n d e d t o p s
PIANURA (Design Monica Armani - 2010)
TECHNICAL FEATURES / Technical chart
Wall-mounted shelf system for washbasin with back-splash and integrated light.
All shelf systems have a specific wall fixing structure.
Top and back-splash are always in the same finish.
Tops: 70 mm thick. They can be adjacent to back-splash (total depth: 565 mm,
back-splash included) or detached from back-splash and provided with LED light
behind the countertop (total depth: 595 mm, back-splash included).
Please add the specific holes for washbasin and tap integration.
Finish: Stone C / D / E (only Silestone® or Dekton® composite) and white Cris-
talplant® (washbasin and tap are to be ordered separately). / white Corian® (SAB-
BIA 6-7 moulded flush-mounted washbasin included, tap to be ordered separately).
Back-splash: 65 mm thick, h. 500 mm, provided with LED light on upper part.
Upper cover panel and side panels in matt white. Please add the specific hole for
possible taps.
Finish: Stone C / D / E (only Silestone® or Dekton® composite), white Cristalplant®,
white Corian®.
DESIGN INSTRUCTIONS:
Please see the compatibility chart for the choice of washbasin (for
tops in Cristalplant® or Stone C / D / E) and tap.
Washbasin, tap, warm/cold water feeders and cables are to be in-
stalled referring to Pianura technical sheet.
500 70 500
70
65 500 65 25 500
565 590
COMPATIBILITY WASHBASINS/TAPS
Washbasin, tap, warm/cold water feeders and cables are to be installed referring to Pianura technical sheet. 15
WASHBASINS TAPS
a = mounted on top
b = mounted on back-splash
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 15.3
S u s p e n d e d t o p s
PIANURA (Design Monica Armani - 2010)
ATTENTION !!! - Stone C / D / E categories are feasible in Silestone® or Dekton® composite ONLY.
Tops with width below the minimum specified are not feasible.
Stone·C
Stone·D
Stone·E
Top adjacent to back-splash in COMPOSITE - P 565 mm • With under-mounted UNIVERSAL SMALL washbasin, L = min 850 mm.
• With under-mounted UNIVERSAL BIG washbasin, L = min 1100 mm.
• The extension for hoses connection kit, cod. RRNS05/06, is suggested in case of compositions
with top-mounted taps.
500 L
565
L P H
L from 700 to 1000 mm - Unit price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 565 500 URAS01
15
500 L
595
L P H
L from 700 to 1000 mm - Unit price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 595 500 URDS01
L = Width
P = Depth
H = Height
Pr = Price code
15.4 01/2018
S u s p e n d e d t o p s
PIANURA (Design Monica Armani - 2010)
Tops with width below the minimum specified are not feasible.
Cristalplant®
Top adjacent to back-splash in CRISTALPLANT® - P 565 mm • With under-mounted UNIVERSAL SMALL washbasin, L = min 850 mm.
• With under-mounted UNIVERSAL BIG washbasin, L = min 1100 mm.
• The extension for hoses connection kit, cod. RRNS05/06, is suggested in case of compositions
with top-mounted taps.
• Not compatible with moulded flush-mounted washbasins.
500 L
565
L P H
L from 700 to 1000 mm - Unit price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 565 500 URAC01
15
500 L
595
L P H
L from 700 to 1000 mm - Unit price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 595 500 URDC01
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 15.5
S u s p e n d e d t o p s
PIANURA (Design Monica Armani - 2010)
Tops with width below the minimum specified are not feasible.
Corian®
Top adjacent to back-splash, with Sabbia washbasin in CORIAN® - • Moulded flush-mounted thermoformed washbasin in white Corian®, without overflow, with white
P 565 mm waste drain and universal chromium-plated siphon.
• Please order separately the possible second washbasin.
• L = min 1700 mm when 2 Sabbia 6 washbasins are used.
• L = min 2000 mm when 2 Sabbia 7 washbasins are used.
• The extension for hoses connection kit, cod. RRNS05/06, is suggested in case of compositions
with top-mounted taps.
500 L
565
L P H
Sabbia 6 - L from 850 to 1000 mm - Unit price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 565 500 URAA01
Top detached from back-splash, with Sabbia washbasin in CORIAN® • Rear LED light.
- P 595 mm • Moulded flush-mounted thermoformed washbasin in white Corian®, without overflow, with white
waste drain and universal chromium-plated siphon.
• Please order separately the possible second washbasin.
• L = min 1700 mm when 2 Sabbia 6 washbasins are used.
• L = min 2000 mm when 2 Sabbia 7 washbasins are used.
• The extension for hoses connection kit, cod. RRNS05/06, is suggested in case of compositions
with top-mounted taps.
15
500 L
595
L P H
Sabbia 6 - L from 850 to 1000 mm - Unit price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 595 500 URDA01
L = Width
P = Depth
H = Height
Pr = Price code
15.6 01/2018
S u s p e n d e d t o p s
PIANURA (Design Monica Armani - 2010)
Specific customised solutions
Please refer to PIANURA TECHNICAL SHEET for the selection of electrical devices and their positioning.
Please see the standard cut-outs (washbasin or tap holes) on chapter Customised Solutions.
Pr
Electronic control unit • For LED lights + any sockets and/or power buttons.
• The electronic control unit is required ONLY when sockets and/or power buttons are posi-
tioned on Pianura back-splash (not to be ordered in case of remote light button and black-
splash without sockets).
L P H
Voltage 220÷230 V - 50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZZACF27
Voltage 110÷125 V - 60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZZACF26
A B C D E F G
L P H
A - Germany - Austria - Holland (VDE). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 - 60 ZFACF10
B - France - Belgium - Poland. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 - 60 ZFACF11
C - Sockets for Switzerland (10A). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 - 60 ZFACF12
D - UK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 - 60 ZFACF14
E - Italy (10A / 16A). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 - 60 ZFACF15
F - US.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 - 60 ZFACF16
G - Australia.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 - 60 ZFACF17
Hole on back-splash including light button (IP 44) • To be used as an alternative to possible remote control supplied by the customer.
15
L P H
................................................................................... 60 - 60 ZFACG01
Hole for recessed tap, on back-splash. • Compatible with WINGS taps art. RHNS01 / RHNS02.
L P H
Cristalplant® - Corian® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBD09
Stone - Marble - Granite - Composite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBD09
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 15.7
S u s p e n d e d t o p s
FLYER (Design C.R.S. Boffi - 2013)
TECHNICAL FEATURES
TOPS
CRISTALPLANT®:
support made of 12 mm thick wood particle boards panels, white, waterproof (class
V100), with low formaldehyde emission (class E1), treated with high performance
melamine resin. Edges in ABS, same colour. Outer structure in 15 mm thick Cris-
talplant®. Optional lower covering panel in white melamine.
Colour: white.
Compatibility: top-mounted - built-in - moulded flush-mounted Cristalplant® - un-
der-mounted washbasins.
CORIAN®:
support made of 12 mm thick wood particle boards panels, white, waterproof (class
V100), with low formaldehyde emission (class E1), treated with high performance
melamine resin. Edges in ABS, same colour. Outer structure in 12 mm thick Cori-
an®. Optional lower covering panel in white melamine.
Colour: white.
Compatibility: feasible ONLY with moulded flush-mounted washbasin mod. SABBIA
6 / 7.
SOLID WOOD:
support made of 15 mm thick strip-wood panels (20 mm for old grey pinewood).
Outer structure (visible vertical, lower and upper surfaces) made of 5 mm thick sol-
id wood panels, 45° mitred and assembled. Optional lower covering panel made of
solid wood panels, treated with water-based matt paints, with oil effect.
Species: natural oak (with knots) - LIGHT Canaletto walnut "sawn effect" - Old grey
pinewood.
Compatibility: top-mounted and built-in top-mounted washbasins.
Please add the specific holes for washbasin and tap integration.
SUPPORTING BRACKETS
L = Width
P = Depth
H = Height
Pr = Price code
15.8 01/2018
S u s p e n d e d t o p s
FLYER (Design C.R.S. Boffi - 2013)
Pr
FLYER - Suspended top in CRISTALPLANT®. • Compatible with top-mounted, built-in or under-mounted washbasins. NOT compatible with
moulded flush-mounted washbasins mod. SABBIA 1, SABBIA 2, KUPA.
• Min. W. 850 mm.
• Max W. 2700 mm.
• The depth can be reduced to 450 mm, upon request and without a price increase.
• Versions: without lower covering panel / with white melamine lower covering panel.
• Please order the brackets separately.
L
100
500/600
L P H
P 500 mm
Without lower covering panel. - Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 100 TQAGCJ1
With lower covering panel. - Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 100 TQAGCJ2
P 600 mm
Without lower covering panel. - Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 600 100 TQAPHJ1
With lower covering panel. - Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 600 100 TQAPHJ2
FLYER - Suspended top in CRISTALPLANT®, with Kupa washbasin. • Moulded flush-mounted KUPA washbasin in Cristalplant®.
• Min. W. 850 mm.
• Max W. 3000 mm.
• Without lower covering panel.
• Please order the brackets separately.
• Please order separately the possible second washbasin (cod. WZKPAJ001).
• L = min 2000 mm when 2 washbasins are used.
L
100
100
134
500
L P H
P 500 mm
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 100 TQAGCKP
FLYER - Suspended top in CORIAN®, with Sabbia washbasin. • Min. W. 850 mm.
• Max W. 3000 mm.
• SABBIA 6 or SABBIA 7 moulded flush-mounted washbasin in Corian®.
• Without lower covering panel.
• Please order the brackets separately.
• Please order separately the possible second washbasin (cod. ZTRBK01 - ZTRBK02) .
• L = min 1700 mm when 2 Sabbia 6 washbasins are used.
L • L = min 2000 mm when 2 Sabbia 7 washbasins are used.
100
15
100
150
500
L P H
P 500 mm
With Sabbia 6. - Price per linear metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 100 TRAGCS6
With Sabbia 7 - Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 100 TRAGCS7
FLYER - Suspended top in SOLID WOOD • Compatible with top-mounted and built-in washbasins.
• Min. W. 850 mm.
• Max. width: 3000 mm (old grey pinewood: 2800 mm).
• The depth can be reduced to 450 mm, upon request and without a price increase.
• Versions: without lower covering panel / with lower covering panel in solid wood, same species
of top.
• Please order the brackets separately.
L
• ABONOS OAK: upon request it's feasible in Abonos Oak solid wood, with a +50% price increase.
100
500/600
L P H
P 500 mm
Without lower covering panel. - Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 100 TTJGCJ1
With lower covering panel. - Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 100 TTJGCJ2
P 600 mm
Without lower covering panel. - Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 600 100 TTJPHJ1
With lower covering panel. - Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 600 100 TTJPHJ2
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 15.9
S u s p e n d e d t o p s
FLYER (Design C.R.S. Boffi - 2013)
Unit price.
The lower covering panel is feasible only when the washbasins are top-mounted. The price of tops with width below the standard
minimum is the same as the price for the minimum top width.
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
FLYER - Suspended top in STONE, MARBLE, GRANITE, COMPOSITE. • Compatible with top-mounted, built-in and under-mounted washbasins.
• Min. W. 850 mm.
• Max. width: see THE GENERAL TECHNICAL PART (INFO).
• Please see the section PRICE RANGES (INFO) for the price categories.
• The depth can be reduced to 450 mm, upon request and without a price increase.
• Versions: without lower covering panel / with lower white or black melamine covering panel
(on the order please specify the desired colour).
L
• Please order the brackets separately.
100
500/600
L P H
P 500 mm
L from 900 to 1500 mm - Without lower covering panel. - Unit price. . . . . . . . - 500 100 TMRGCJ3
L from 1501 to 2000 mm - Without lower covering panel. - Unit price. . . . . . . - 500 100 TMRGCJ4
L from 2001 to 2500 mm - Without lower covering panel. - Unit price. . . . . . . - 500 100 TMRGCJ5
L from 2501 to 3000 mm - Without lower covering panel. - Unit price. . . . . . . - 500 100 TMRGCJ6
L from 900 to 1500 mm - With lower covering panel. - Unit price. . . . . . . . . . . - 500 100 TMRGCJ7
L from 1501 to 2000 mm - With lower covering panel. - Unit price. . . . . . . . . . - 500 100 TMRGCJ8
L from 2001 to 2500 mm - With lower covering panel. - Unit price. . . . . . . . . . - 500 100 TMRGCJ9
L from 2501 to 3000 mm - With lower covering panel. - Unit price. . . . . . . . . . - 500 100 TMRGCK0
P 600 mm
L from 900 to 1500 mm - Without lower covering panel. - Unit price. . . . . . . . - 600 100 TMRPHJ3
L from 1501 to 2000 mm - Without lower covering panel. - Unit price. . . . . . . - 600 100 TMRPHJ4
L from 2001 to 2500 mm - Without lower covering panel. - Unit price. . . . . . . - 600 100 TMRPHJ5
L from 2501 to 3000 mm - Without lower covering panel. - Unit price. . . . . . . - 600 100 TMRPHJ6
L from 900 to 1500 mm - With lower covering panel. - Unit price. . . . . . . . . . . - 600 100 TMRPHJ7
L from 1501 to 2000 mm - With lower covering panel. - Unit price. . . . . . . . . . - 600 100 TMRPHJ8
L from 2001 to 2500 mm - With lower covering panel. - Unit price. . . . . . . . . . - 600 100 TMRPHJ9
L from 2501 to 3000 mm - With lower covering panel. - Unit price. . . . . . . . . . - 600 100 TMRPHK0
15
Pr
Supporting bracket, external fixing. • Steel, matt white painted.
L P H
For top P 500 mm
..................................................................................... 120 415 80 ATDY006
L = Width
P = Depth
H = Height
Pr = Price code
15.10 01/2018
T o p s
NOTE TO DESIGNER
This chapter indicates, with specific symbols, the compatibility between washbasin and tops.
To select a washbasin please refer to the compatibility with top chapter.
DO NOT add the cut-out for washbasin. The price includes the washbasin and the gluing process.
DO NOT add the cut-out for washbasin. The price includes the washbasin moulding process cost.
Please add always the cut-out for under-mounted washbasin cod. ZNBA10 and the under top washbasin gluing cod. ZNBD07.
16
For any other combination of top and washbasins listed in the price list (except for the WOOD-IN tops for GARDEN washbasin,
which are supplied with cut-out), please add the cut-out for top-mounted washbasin cod. ZNBA09 or the cut-out for under-mounted
washbasin cod. ZNBA10 (see chapter Customised Solutions - Price Increases - Maintenance).
Other specific customised solutions shall be added to the top (i.e. the tap hole cod. ZNBD01) accordingly to the design of the com-
position.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 16.3
T o p s
PROGRAMMA STANDARD - SIMPLE - FREE ZONE
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Pr
Top in CRISTALPLANT® - Thickness: 15 mm • Width: min. 600 mm, max. 2900 mm.
• IMPORTANT ! : The cut-out and gluing costs of UNDER-MOUNTED WASHBASINS in Cristalplant®
is included in the washbasin price.
15
• Please order the specific top cod. TQABJS1 when moulded flush-mounted washbasins are used.
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 15 TQABJA5
-
White
Top in CRISTALPLANT® for moulded flush-mounted washbasin - • Width: min. 600 mm, max. 2300 mm.
Thickness: 15 mm • To be used ONLY with SABBIA 1, SABBIA 2 and KUPA washbasins (moulding process is included:
IT'S NOT necessary to add the cut-out for washbasin and/or price for gluing).
15
16
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 15 TQABJS1
-
White
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
16.4 01/2018
T o p s
PROGRAMMA STANDARD - SIMPLE - FREE ZONE
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Pr
Top in LASERMAT - Thickness: 20 mm • Width: min. 600 mm, max. 3200 mm.
• To be used ONLY with TOP-MOUNTED and BUILT-IN washbasins.
• Customised angles or pillar cut-outs are NOT feasible.
20 • Please add any cut-out for TOP-MOUNTED washbasin cod. ZNBA09 and/or holes for tap.
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 20 TLSCJA5
Top in CORIAN® - Thickness: 20 mm • Width: min. 1000 mm, max. 3650 mm.
• To be used ONLY with TOP-MOUNTED and BUILT-IN washbasins.
12 • Please add any cut-out for TOP-MOUNTED washbasin cod. ZNBA09 and/or holes for tap.
20
8
16
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 20 TRACJA5
173
White
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
01/2018 16.5
T o p s
PROGRAMMA STANDARD - SIMPLE - FREE ZONE
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Top in STONE, MARBLE, GRANITE, COMPOSITE - Thickness: 20 • Width: min. 600 mm.
mm • Max. width: see THE GENERAL TECHNICAL PART (INFO).
• Please see the letter written in the finish picture for the price categories.
20 • Please add any cut-out for washbasin and/or holes for tap.
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 20 TMRCJA5
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE SILESTONE®
C C C D D D D D D D
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
D D D E E E E E E
16
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
16.6 01/2018
T o p s
PROGRAMMA STANDARD - SIMPLE - FREE ZONE
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Pr
Top in SOLID WOOD - Thickness: 23 mm • Width: min. 600 mm, max. 3000 mm (Old grey pinewood: 2800 mm).
• To be used ONLY with TOP-MOUNTED and BUILT-IN washbasins.
• Please add any cut-out for TOP-MOUNTED washbasin cod. ZNBA09 and/or holes for tap.
23
NEW
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 23 TTJDDA5
SOLID WOOD
058 057
Canaletto Old grey
LIGHT walnut pinewood
“sawn-effect“
16
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
01/2018 16.7
T o p s
PROGRAMMA STANDARD - SIMPLE
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Pr
Top in GLASS - Thickness: 12 mm • Width: min. 600 mm, max. 3650 mm.
• Please add any cut-out for washbasin and/or holes for tap.
12 • In case of use of UNDER-MOUNTED washbasins please add always the price for gluing cod.
ZNBD07.
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 12 TGAAVA5
T o p s
PROGRAMMA STANDARD - SIMPLE
Price per linear metre
Tops with width below the minimum specified are not feasible.
Pr
Top in GLASS, with moulded flush-mounted washbasin - Thickness: • Extralight glass, painted sanded > the Extralight glass used on these tops is sandblasted and
12 mm not frosted. This working process can change the tone of the same colour in frosted version,
this can not be consider cause for a complaint.
• Width: min. 900 mm, max. 2085 mm.
• Washbasin without overflow, with waste drain cod. ANBN002 chromium-plated (free-flow waste),
max 2085 310 with plug covered by glass.
• Compatible siphon: ANBM002 chromium-plated / ANBM006 stainless steel / ANBM016 grey PVD.
• Compositions with 2 washbasins are feasible ONLY using two tops pull together.
• Please add any holes for tap.
110 700
10
• Any small difference or imperfection from a sample is to be considered characteristic of the
artisanal processing, that make each piece unique.
L P H
Top in GLASS, with moulded flush-mounted washbasin - Thickness: • Extralight glass, painted sanded > the Extralight glass used on these tops is sandblasted and
12 mm not frosted. This working process can change the tone of the same colour in frosted version,
this can not be consider cause for a complaint.
• Width: min. 900 mm, max. 2985 mm.
• Double washbasin not available.
max 2985 • Washbasin without overflow, with waste drain cod. ANBN002 chromium-plated (free-flow waste),
with plug covered by glass.
max 2985 • Compatible siphon: ANBM002 chromium-plated / ANBM006 stainless steel / ANBM016 grey PVD.
310 max 150 • Drawn=left (S), mirrored=right (D).
2835
• Compositions with 2 washbasins are feasible ONLY using two tops pull together.Any small
10 difference or imperfection from a sample is to be considered characteristic of the artisanal
700
110 processing, that make each piece unique.
min 450
max 600
L P H
Lateral washbasin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 12 TGAAZG6 S-D 136,8
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Pr
Top in CRISTALPLANT® - Thickness: 15 + 50 mm • Width: min. 600 mm, max. 2900 mm.
• IMPORTANT ! : The cut-out and gluing costs of UNDER-MOUNTED WASHBASINS in Cristalplant®
is included in the washbasin price.
15
• Please order the specific top cod. TQABJXF when moulded flush-mounted washbasins are used.
50
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 65 TQABJXB
-
White
Top in CRISTALPLANT® for moulded flush-mounted washbasin - • Width: min. 600 mm, max. 2300 mm.
Thickness: 15 + 50 mm • To be used ONLY with SABBIA 1, SABBIA 2 and KUPA washbasins (moulding process is included:
IT'S NOT necessary to add the cut-out for washbasin and/or price for gluing).
15
16
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 65 TQABJXF
-
White
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
01/2018 16.9
T o p s
XILA BATH
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Top in STONE, MARBLE, GRANITE, COMPOSITE - • Width: min. 600 mm.
Thickness: 20 + 50 mm • Max. width: see THE GENERAL TECHNICAL PART (INFO).
20 • Please see the letter written in the finish picture for the price categories.
• Feasible in all range options of MARBLE, STONE, GRANITE, SILESTONE® and DEKTON®.
• Under-top front panel H 50 mm included.
50
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 70 TMRCJXB
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE SILESTONE®
C C C D D D D D D D
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
D D D E E E E E E
16
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
16.10 01/2018
T o p s
XILA BATH
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Top in COMPOSITE - Thickness: 12 + 50 mm • Width: min. 600 mm.
• Max. width: see THE GENERAL TECHNICAL PART (INFO).
• Please see the section PRICE RANGES (INFO) for the price categories.
12
• Feasible in all range options of SILESTONE® or DEKTON®.
50 • Under-top front panel H 50 mm included.
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 62 TMRAVXB
COMPOSITE SILESTONE®
C C C D D D D D D D
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
D D D E E E E E E
Pr
Top in CORIAN® - Thickness: 20 + 50 mm • Width: min. 1000 mm, max. 3650 mm.
• To be used ONLY with TOP-MOUNTED washbasins.
16
20
50
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 500 70 TRACJXB
173
White
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
01/2018 16.11
T o p s
B14
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Pr
Top in CRISTALPLANT® - Thickness: 50 mm • Width: min. 600 mm, max. 2870 mm.
• Frontal bevelled edge.
35°
• IMPORTANT ! : The cut-out and gluing costs of UNDER-MOUNTED WASHBASINS in Cristalplant®
50 is included in the washbasin price.
505
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 505 50 TQAJAW1
-
White
16
Pr
90° edge • Please consider to add a customisation/cut-out on each side. Alternately it’s possible to have a
35° edge, according to design requirements.
L P H
Cristalplant® - Unit price.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZTLHP01 S-D
35° sloping edge • Please consider to add a customisation/cut-out on each side. Alternately it’s possible to have
a 90° edge, according to design requirements.
L P H
Cristalplant® - Unit price.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZTLHP02 S-D
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
16.12 01/2018
T o p s
B14
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Top in STONE, MARBLE, GRANITE, COMPOSITE - Thickness: 50 • Width: min. 600 mm.
mm • Max. width: see THE GENERAL TECHNICAL PART (INFO).
35°
• Please see the letter written in the finish picture for the price categories.
50 • Please add any cut-out for washbasin and/or holes for tap.
505
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 505 50 TMRJAW1
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE SILESTONE®
C C C D D D D D D D
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
D D D E E E E E E
16
Pr
90° edge • Please consider to add a customisation/cut-out on each side. Alternately it’s possible to have a
35° edge, according to design requirements.
L P H
Stone, marble, granite, composite - Unit price. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZPMHP03 S-D
35° sloping edge • Please consider to add a customisation/cut-out on each side. Alternately it’s possible to have a
90° edge, according to design requirements.
L P H
Stone, marble, granite, composite - Unit price. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZPMHP04 S-D
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
01/2018 16.13
T o p s
I FIUMI ST
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Pr
Top in CRISTALPLANT® - Thickness: 20 mm • Width: min. 600 mm, max. 2300 mm.
• 45° edges on 3 sides.
• IMPORTANT ! : The cut-out and gluing costs of UNDER-MOUNTED WASHBASINS in Cristalplant®
20 is included in the washbasin price.
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 531 20 TQAPEC7
-
White
Top in CORIAN® for moulded flush-mounted washbasin - Thick- • Width: min. 600 mm, max. 3000 mm.
ness: 20 mm • 45° edges on 3 sides.
• Please order separately any SABBIA 6 or SABBIA 7 washbasin (the moulding process is included
20 in the price: it's not necessary to add any washbasin cut-out and/or gluing process).
16 L P H
To be used only with SABBIA 6 and SABBIA 7 washbasins (thermoformed) - Price per linear metre . . . . . . - 531 20 TRAPEC7
173
White
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
16.14 01/2018
T o p s
I FIUMI ST
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Top in STONE, MARBLE, GRANITE, COMPOSITE - Thickness: 20 • Width: min. 600 mm.
mm • Max. width: see THE GENERAL TECHNICAL PART (INFO).
• Please see the letter written in the finish picture for the price categories.
20 • Please add any cut-out for washbasin and/or holes for tap.
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 531 20 TMRPEC7
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE SILESTONE®
C C C D D D D D D D
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
D D D E E E E E E
16
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
01/2018 16.15
T o p s
SOHO - WOOD-IN
Price per linear metre
When used on WOOD-IN cabinets, it is compatible ONLY with TOP-MOUNTED washbasins: please add a double cut-out for washbasin - cod. ZNBA09 - on top
and on cabinet.
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Pr
Top in CRISTALPLANT® - Thickness: 15 mm • Width: min. 600 mm, max. 2900 mm.
• IMPORTANT ! : The cut-out and gluing costs of UNDER-MOUNTED WASHBASINS in Cristalplant®
is included in the washbasin price.
15
• Please order the specific top cod. TQABFS1 when flush-mounted washbasins are used.
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 480 15 TQABFA5
-
White
Top in GLASS - Thickness: 12 mm • Width: min. 600 mm, max. 3650 mm.
• Please add any cut-out for washbasin and/or holes for tap.
12 • In case of use of UNDER-MOUNTED washbasins please add always the price for gluing cod.
ZNBD07.
16 L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 480 12 TGAAXA5
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
16.16 01/2018
T o p s
SOHO - WOOD-IN
Price per linear metre
When used on WOOD-IN cabinets, it is compatible ONLY with TOP-MOUNTED washbasins: please add a double cut-out for wash-
basin - cod. ZNBA09 - on top and on cabinet.
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Top in STONE, MARBLE, GRANITE, COMPOSITE - Thickness: 20 • Width: min. 600 mm.
mm • Max. width: see THE GENERAL TECHNICAL PART (INFO).
• Please see the letter written in the finish picture for the price categories.
20 • Please add any cut-out for washbasin and/or holes for tap.
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 480 20 TMRCFA5
240 250 200 245 199 257 261 254 260 259
Marble Stone Stone Stone Granite Quartzite Marble Granite Marble Quartzite
White Carrara Serena Cardoso Matraia Black absolute Silver Emperador Black Cosmic Grey Stone Calacatta
Zimbabwe Dark
COMPOSITE SILESTONE®
C C C D D D D D D D
432 433 435 431 437 436 438 434 439 440
Expo grey Concrete grey Tebas black Zeus white Lagoon white Yukon white Kensho grey Unsui brown Merope grey- Doradus black
brown
COMPOSITE DEKTON®
D D D E E E E E E
16
455 452 453 454 456 451 457 458 459
Edora beige Kadum brown Sirius black Zenith white Irok beige Strato grey Ventus grey Korus grey Galema brown
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
01/2018 16.17
T o p s
SOHO
Price per linear metre
The price of tops with widths below the standard minimum is the same as price for the minimum top width.
Pr
Top in CRISTALPLANT® for moulded flush-mounted washbasin - Thick- • Width: min. 600 mm, max. 2300 mm.
ness: 15 mm • To be used only with SABBIA 1 and SABBIA 2 washbasins (moulding process is included: IT'S
NOT necessary to add the cut-out for washbasin and/or price for gluing).
15
L P H
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 480 15 TQABFS1
-
White
16
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Cut-out for UNDER-MOUNTED washbasin > ZNBA10 P = Depth
H = Height
Tap hole > ZNBD01 Pr = Price code
16.18 01/2018
T o p s
SOHO
Price per linear metre
Tops with width below the minimum specified are not feasible.
Pr
Top in GLASS, with moulded flush-mounted washbasin - Thickness: • Extralight glass, painted sanded > the Extralight glass used on these tops is sandblasted and
12 mm not frosted. This working process can change the tone of the same colour in frosted version,
this can not be consider cause for a complaint.
• Width: min. 900 mm, max. 2085 mm.
• Washbasin without overflow, with waste drain cod. ANBN002 chromium-plated (free-flow waste),
max 2085 310 with plug covered by glass.
• Compatible siphon: ANBM002 chromium-plated / ANBM006 stainless steel / ANBM016 grey PVD.
• Compositions with 2 washbasins are feasible ONLY using two tops pull together.
700
• Please add any holes for tap.
110
10 • Any small difference or imperfection from a sample is to be considered characteristic of the
artisanal processing, that make each piece unique.
L P H
Central washbasin - Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 480 12 TGAAYG5
Top in GLASS, with moulded flush-mounted washbasin - Thickness: • Extralight glass, painted sanded > the Extralight glass used on these tops is sandblasted and
12 mm not frosted. This working process can change the tone of the same colour in frosted version,
this can not be consider cause for a complaint.
• Width: min. 900 mm, max. 2985 mm.
• Double washbasin not available.
max 2985 • Washbasin without overflow, with waste drain cod. ANBN002 chromium-plated (free-flow waste),
with plug covered by glass.
max 2985 • Compatible siphon: ANBM002 chromium-plated / ANBM006 stainless steel / ANBM016 grey PVD.
310 max 150 2835 • Drawn=left (S), mirrored=right (D).
• Compositions with 2 washbasins are feasible ONLY using two tops pull together.Please add
10 any holes for tap.
700
110 • Please add any holes for tap. 16
min 455 • Any small difference or imperfection from a sample is to be considered characteristic of the
max 605 artisanal processing, that make each piece unique.
L P H
Lateral washbasin - Price per linear metre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 480 12 TGAAYG6 S-D
Unit price.
If other Boffi top-mounted washbasins are used, please order SOHO / WOOD-IN cod. TQABFA5 / TMRCFA5 / TGAAXA5 tops.
CUSTOMISATIONS ARE NOT FEASIBLE.
The internal bottom cover of the GARDEN washbasin in STONE, MARBLE, GRANITE finish is cut-out from the same sheet of the top,
to guarantee a continuous grain.
Stone A: available ONLY in white CARRARA marble.
Stone B: available ONLY in Cardoso stone.
Corian®
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Stone C: available ONLY in QUARTZITE SILVER.
Stone D: available ONLY in Black Cosmic granite / Emperador Dark marble.
Stone E: available ONLY in GREY STONE marble / Quartzite Calacatta.
L P H
STONE, MARBLE, GRANITE - Unit price. . . . . . . . . . . . . . . . . . . . . . . . 905 480 10 TMRAY01
CORIAN® - Unit price. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 905 480 12 TRAAX01
CORIAN®
GARDEN
173
White
905
1188 1488
1488
BWAMQ180WS BWAMS180WS
BWAMQ180W BWAMS180W
1788 1788
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Tap hole > ZNBD01 P = Depth
H = Height
Pr = Price code
16.20 01/2018
T o p s
WOOD-IN for GARDEN washbasin
Unit price.
If other Boffi top-mounted washbasins are used, please order SOHO / WOOD-IN cod. TQABFA5 / TMRCFA5 / TGAAXA5 tops.
CUSTOMISATIONS ARE NOT FEASIBLE.
The internal bottom cover of the GARDEN washbasin in STONE, MARBLE, GRANITE finish is cut-out from the same sheet of the top,
to guarantee a continuous grain.
Stone A: available ONLY in white CARRARA marble.
Stone B: available ONLY in Cardoso stone.
Corian®
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Stone C: available ONLY in QUARTZITE SILVER.
Stone D: available ONLY in Black Cosmic granite / Emperador Dark marble.
Stone E: available ONLY in GREY STONE marble / Quartzite Calacatta.
Top for washbasin GARDEN - L 1205 mm.
• Compatible cabinets: please see the compatibility technical chart.
• Arranged for GARDEN washbasin, to be ordered separately.
480 • The price includes the cut-out for washbasin.
=
• Please consider to add a cut-out for top-mounted washbasin on cabinet, cod. ZNBA09.
1205
• Tap holes are not feasible on tops in STONE, MARBLE, GRANITE: please order wall-mount-
= ed taps.
L P H
STONE, MARBLE, GRANITE - Unit price. . . . . . . . . . . . . . . . . . . . . . . . 1205 480 10 TMRAY02
CORIAN® - Unit price. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1205 480 12 TRAAX02
CORIAN®
GARDEN
173
White
BWANZ120WS
BWANZ120W
16
1205
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Tap hole > ZNBD01 P = Depth
H = Height
Pr = Price code
01/2018 16.21
T o p s
WOOD-IN for GARDEN washbasin
Unit price.
If other Boffi top-mounted washbasins are used, please order SOHO / WOOD-IN cod. TQABFA5 / TMRCFA5 / TGAAXA5 tops.
CUSTOMISATIONS ARE NOT FEASIBLE.
The internal bottom cover of the GARDEN washbasin in STONE, MARBLE, GRANITE finish is cut-out from the same sheet of the top,
to guarantee a continuous grain.
Stone A: available ONLY in white CARRARA marble.
Stone B: available ONLY in Cardoso stone.
Corian®
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Stone C: available ONLY in QUARTZITE SILVER.
Stone D: available ONLY in Black Cosmic granite / Emperador Dark marble.
Stone E: available ONLY in GREY STONE marble / Quartzite Calacatta.
Top for washbasin GARDEN - L 1205 mm.
• Compatible cabinets: please see the compatibility technical chart.
• Arranged for GARDEN washbasin, to be ordered separately.
452,5 480 • The price includes the cut-out for washbasin.
• Reversible top, left (S) right (D).
1205
• Please consider to add a cut-out for top-mounted washbasin on cabinet, cod. ZNBA09.
• Tap holes are not feasible on tops in STONE, MARBLE, GRANITE: please order wall-mount-
ed taps.
L P H
STONE, MARBLE, GRANITE - Unit price. . . . . . . . . . . . . . . . . . . . . . . . 1205 480 10 TMRAY03
CORIAN® - Unit price. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1205 480 12 TRAAX03
CORIAN®
GARDEN
173
White
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Tap hole > ZNBD01 P = Depth
H = Height
Pr = Price code
16.22 01/2018
T o p s
WOOD-IN for GARDEN washbasin
Unit price.
If other Boffi top-mounted washbasins are used, please order SOHO / WOOD-IN cod. TQABFA5 / TMRCFA5 / TGAAXA5 tops.
CUSTOMISATIONS ARE NOT FEASIBLE.
The internal bottom cover of the GARDEN washbasin in STONE, MARBLE, GRANITE finish is cut-out from the same sheet of the top,
to guarantee a continuous grain.
Stone A: available ONLY in white CARRARA marble.
Stone B: available ONLY in Cardoso stone.
Corian®
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Stone C: available ONLY in QUARTZITE SILVER.
Stone D: available ONLY in Black Cosmic granite / Emperador Dark marble.
Stone E: available ONLY in GREY STONE marble / Quartzite Calacatta.
Top for washbasin GARDEN - L 1355 mm.
• Compatible cabinets: please see the compatibility technical chart.
• Arranged for GARDEN washbasin, to be ordered separately.
480 • The price includes the cut-out for washbasin.
602,5 • Reversible top, left (S) right (D).
1355
• Please consider to add a cut-out for top-mounted washbasin on cabinet, cod. ZNBA09.
• Tap holes are not feasible on tops in STONE, MARBLE, GRANITE: please order wall-mount-
ed taps.
L P H
STONE, MARBLE, GRANITE - Unit price. . . . . . . . . . . . . . . . . . . . . . . . 1355 480 10 TMRAY04
CORIAN® - Unit price. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1355 480 12 TRAAX04
CORIAN®
GARDEN
173
White
BWAMT180WS BWAMU180WS
BWAMT180W BWAMU180W
16
1788 1788
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Tap hole > ZNBD01 P = Depth
H = Height
Pr = Price code
01/2018 16.23
T o p s
WOOD-IN for GARDEN washbasin
Unit price.
If other Boffi top-mounted washbasins are used, please order SOHO / WOOD-IN cod. TQABFA5 / TMRCFA5 / TGAAXA5 tops.
CUSTOMISATIONS ARE NOT FEASIBLE.
The internal bottom cover of the GARDEN washbasin in STONE, MARBLE, GRANITE finish is cut-out from the same sheet of the top,
to guarantee a continuous grain.
Stone A: available ONLY in white CARRARA marble.
Stone B: available ONLY in Cardoso stone.
Corian®
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
Stone C: available ONLY in QUARTZITE SILVER.
Stone D: available ONLY in Black Cosmic granite / Emperador Dark marble.
Stone E: available ONLY in GREY STONE marble / Quartzite Calacatta.
Top for double washbasin GARDEN - L 1788 mm.
• Compatible cabinets: please see the compatibility technical chart.
• Arranged for 2 GARDEN washbasins, to be ordered separately.
480 • The price includes the cut-out for washbasin.
452,5
• Please consider to add a cut-out for top-mounted washbasin on cabinet, cod. ZNBA09.
• Because of technical reasons, the top in STONE, MARBLE, GRANITE with double wash-
1788 basin is 20 mm thick and not 10 mm.
• Tap holes are not feasible on tops in STONE, MARBLE, GRANITE: please order wall-mount-
ed taps.
452,5
L P H
STONE, MARBLE, GRANITE - Unit price. . . . . . . . . . . . . . . . . . . . . . . . 1788 480 20 TMRAY05
CORIAN® - Unit price. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1788 480 12 TRAAX05
CORIAN®
GARDEN
173
White
BWAMR180WS
BWAMR180W
16
1788
Main CUSTOMISED SOLUTIONS: Cut-out for TOP-MOUNTED / built-in washbasin > ZNBA09 L = Width
Tap hole > ZNBD01 P = Depth
H = Height
Pr = Price code
16.24 01/2018
C u s t o m i s e d s o l u t i o n s
TOPS / SHELVES
Pr
Cut-out for TOP-MOUNTED / built-in washbasin. • For washbasins design Boffi.
• On the order please specify the washbasin to be installed.
• In case of washbasins by Client the order must include the technical drawings for
any necessary cut-out.
• To be ordered in case of washbasins mounted on WOOD-IN units too.
L P H
Lasermat - Wood - Cristalplant® - Corian® - Solid wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBA09
Stone - Marble - Granite - Composite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBA09
Glass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBA09
L P H
Stone - Marble - Granite - Composite - Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBA10
Tap hole. • Please add this code for each tap hole.
L P H
All finishes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBD01
Hole for WINGS taps. • Compatible with WINGS taps cod. RHNS05 / RHNS06.
• Hole NOT possible on tops in old grey pinewood.
17
L P H
Lasermat - Wood - Cristalplant® - Corian® - Solid wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBD08
Stone - Marble - Granite - Composite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBD08
Under top washbasin gluing. • To be used always for under-mounted washbasins matched with glass tops.
L P H
Glass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBD07
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 17.3
C u s t o m i s e d s o l u t i o n s
TOPS / SHELVES
Pr
1 customised angle.
L P H
All finishes, Lasermat and Glass excluded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBD02
L P H
All finishes, Lasermat excluded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBD03
250
L P H
All finishes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBE01
17
L P H
All finishes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBF01
Milling of shelves / back panels. • For joining of shelves and back panels with wood support.
• Please add this code for each element to be milled.
L P H
Silcover - Ecolak - Wood - Wood Selection - Polyester - Metals - Solid wood . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBV01
L = Width
P = Depth
H = Height
Pr = Price code
17.4 01/2018
C u s t o m i s e d s o l u t i o n s
TOPS / SHELVES
Pr
Price increase for top/shelf or back panel in accordance to client’s template. • Please send the template.
5
4
3
2
1
0
L P H
All finishes, Lasermat excluded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBV02
L P H
Marble - Granite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBD05
L P H
Zimbabwe extra black granite.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBD06
17
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 17.5
C u s t o m i s e d s o l u t i o n s
CABINETS
Pr
Width, height or depth reduction of cabinet. • Unit price - valid also in case of reduction of more than 1 dimension (i.e.: width
+ depth).
L P H
Cabinets with shelves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBG01
Cabinets with drawers.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBG02
Width reduction of FREE ZONE cabinets with coplanar door (special rail). • Price includes the customised special rail and 2 cabinet reductions code ZNBG01
(these reductions are not charged).
• Reduction not possible on cabinets L 1200 mm.
L P H
................................................................................... - - - ZBAEA02
Cabinet with dimensions bigger than the standard ones. • You must absolutely follow the rules.
• For 1 size increase please consider 1 price increase/customised solution, for 2 or
+ + 3 size increases please consider 2 price increases/customised solutions.
+ • RRDM02 FINO AD ESAURIMENTO SCORTE
L P H
Cabinets with shelves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBG05
Cabinets with drawers.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBG06
Pillar cut-out.
17
L P H
Cabinets with shelves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBG03
L P H
All finishes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBG04
L = Width
P = Depth
H = Height
Pr = Price code
17.6 01/2018
C u s t o m i s e d s o l u t i o n s
CABINETS
Pr
Disassembling of cabinet. • Percentage to be added to standard price.
L P H
................................................................................... - - - ZNBG07
Continuous drilling for shelf supports on unit side panels. • To be added on each unit.
L P H
................................................................................... - - - ZNBG08
Cabinet supplied without finished parts. • Please take Silcover finish price -30%.
L P H
................................................................................... - - - ZNBG09
Design and drawing of a customised cabinet. • not referable to any customisation code.
?
L P H 17
................................................................................... - - - ZNBG10
Cut-out for socket. • Price includes the cut-out and the socket itself.
• In the order please specify the socket type (A-B-C-D-E-F-G-H).
A B C D E F G H
L P H
A - Germany - Austria - Holland (VDE). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBZ01
B - France - Belgium - Poland. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBZ02
C - Switzerland (10A). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBZ03
D - Denmark. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBZ04
E - UK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBZ05
F - Italy (10A/16A). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBZ06
G - USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBZ07
H - Australia.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ZNBZ08
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 17.7
P r i c e i n c r e a s e s
HANDLES WITH PRICE INCREASE
Pr
Handles with price increase. • Unit price per single handle.
• Valid for all handles with price increase, in all compatible finishes.
• Please see the sizes and correct positioning under the technical features (in the
general part).
L P H
X12, X36 - Compatible finishes: Silcover - Ecolak - Wood - Wood Selection - - - JZMW01
- Polyester - Corian® - Wood Exclusive.
17
YARD - Sizes: 249 - 406 - 556 - 856 - 1156 mm / Compatible finishes: all.
L = Width
P = Depth
H = Height
Pr = Price code
17.8 01/2018
P r i c e i n c r e a s e s
CUSTOMISED FINISHES
Please consider a 4 weeks time increase for products preparation. When the colour is “as sample“ please calculate the preparation timing referring to the date of
acceptance of sample made by Boffi and sent to the customer.
ATTENTION! Price increases start from a minimum value of € 200,00 (net dealer value, VAT excl.). Custom colour requests with price
increases of lesser amounts are considered equal to the € 200.00 minimum charge.
Pr
SILCOVER • % price increase for special colour.
• The price increase is applied to the price of cabinets in SILCOVER.
• Fluorescent or metalized colours excluded.
L P H
RAL or NCS colour. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - JZAJ03
Colour AS SAMPLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - JZAJ04
P r i c e i n c r e a s e s
VARIOUS
Pr
Shipping in wooden crate. • Price expressed in EURO, net dealer value, tax excluded.
• For compositions with net dealer value till 10.000 EUROS. For compositions with
value higher than 10.000 EUROS please add a price increase each 10000 EU-
ROS or portion. Example: for a composition of 26000 EUROS please consider
3 price increases /for a composition of 12500 EUROS please consider 2 price
increases.
17
L P H
................................................................................... - - - JZAD04
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 17.9
M a i n t e n a n c e
MATERIALS FOR CLEANING AND MAINTENANCE
Pr
Clean Set. • Package with cleaning products.
• It includes: Boffi microfibre cloth, 100 gr multipurpose cream.
L P H
3 pieces per package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVBL029
L P H
10 pieces per package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVBL017
Stainless Steel Polish Cleaner. • In-depth cleaner for stainless steel, aluminium and chromium-plated surfaces.
• 500 ml bottle.
L P H
3 pieces per package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVBL030
17
L P H
3 pieces per package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVBL020
L P H
3 pieces per package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVBL021
L = Width
P = Depth
H = Height
Pr = Price code
17.10 01/2018
M a i n t e n a n c e
MATERIALS FOR CLEANING AND MAINTENANCE
Pr
Cleaning/maintenance kit for doors and panels in solid wood, oil finish. • Kit A includes: TRENA 50 ml neutral cleaner + BIVOS 50 ml oil wax + cotton
cloth+ abrasive cleaning disc.
• Kit B includes: REINIGER 250 ml cleaner + PFLEGEÖL 250 ml oil wax.
A B
L P H
Cleaning kit for surfaces in Lasermat. • It includes: 100 ml spray cleaner + sponge + microfibre cloth.
L P H
................................................................................... - - - AVBL033
C1.07 DAY - Cleaner for surfaces in stone, marble, granite, composite. • 500 ml bottle.
17
L P H
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 17.11
M a i n t e n a n c e
MATERIALS FOR CLEANING AND MAINTENANCE
Pr
Lacquers and paints - touch-up. • 40 ml bottle of water-based touch-up, with small brush.
• The packages heavier than 100 ml cannot be shipped by air.
Silcover L P H
White 003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB262
Magnolia 129 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB261
Cream 009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB261
Grey 119. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB267
Pebble grey 024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Sand 131 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB268
Ecrù 025 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Mud 023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Greene-brown 011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
graphite grey 134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB265
Blue 323 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB261
Moka 120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB266
Black 118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB263
Ecolak
Arctic white 510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB262
Magnolia 129 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Cream 009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Pebble grey 024 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Oat colour 512 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB268
Ecrù 025 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Mud 023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Cloud colour 513 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB267
Iron 137 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Red 010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Greene-brown 011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Blue 323 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Very dark brown 514 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
Basalt grey 515 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB265
Black 027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB263
Charcoal 517 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB260
17
Polyester L P H
Any colour of Boffi Polyester range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB231
Silcover L P H
Colour to be chosen from Boffi Silcover range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB232
Polyester
Colour to be chosen from Boffi Polyester range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVAB233
L = Width
P = Depth
H = Height
Pr = Price code
17.12 01/2018
M a i n t e n a n c e
MATERIALS FOR CLEANING AND MAINTENANCE
Pr
Welding and repair kit for parts in Corian® .
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - ATMT003
CT Ecology System - water-repellent treatment kit. • For marble, stone and terracotta.
L P H
0,5 lt.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVBL016
17
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 17.13
M i r r o r s
Pr
WK6 - (Design Piero Lissoni) • Price per square meter.
Customised mirror. • 23 mm thick aluminium frame. Available versions: naturally anodised, matt white
or matt black painted.
• Horizontal or vertical assembly possible.
A • H min 200 mm / max 1200 mm.
200 min. • Min. possible size: 0,60 m² - For smaller mirrors the price has to be considered
as that of the minimum size.
1200 max. • A = vertical supporting piece. To L 900 mm: no pieces necessary / from L 901 to
1500 mm: 1 piece / from L 1501 to 3000 mm: 2 pieces.
WK6 - (Design Piero Lissoni) • 23 mm thick aluminium frame. Available versions: naturally anodised, matt white
Fixed-sized mirror. or matt black painted.
• Horizontal or vertical assembly possible.
L P H
................................................................................... 900 23 900 OMAR04
................................................................................... 1200 23 900 OMAR05
................................................................................... 1350 23 900 OMAR06
................................................................................... 1500 23 900 OMAR07
................................................................................... 1800 23 900 OMAR08
WK6 - (Design Piero Lissoni) • 23 mm thick aluminium frame. Available versions: naturally anodised, matt white
Mirror with single LED bar. or matt black painted.
23 • Lighting: LED.
• Max. power: 18 W per linear metre. Colour temperature: 2700° K.
• Switch: on wall please arrange cable - centred positioned, and relative remote
H control.
190 • Voltage: 110 ÷ 240 V - 50 ÷ 60 Hz (Europe/USA).
• It cannot be rotated.
L P H
Europe/USA version.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 23 900 OMAL02
Europe/USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 23 1200 OMAL03
Europe/USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 23 1200 OMAL04
Europe/USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 23 1800 OMAL05
18
WK6 - (Design Piero Lissoni) • 23 mm thick aluminium frame. Available versions: naturally anodised, matt white
Mirror with double LED bar. or matt black painted.
190 • Lighting: LED.
23
• Max. power: 18 W per linear metre. Colour temperature: 2700° K.
190 H • Switch: dimmerable button with position LED.
• Voltage: 110 ÷ 240 V - 50 ÷ 60 Hz (Europe/USA).
• It cannot be rotated.
L P H
Europe/USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 23 900 OMAD01
Europe/USA version.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 23 900 OMAD02
Europe/USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 23 1200 OMAD03
Europe/USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 23 1200 OMAD04
Europe/USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 23 1200 OMAD05
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 18.3
M i r r o r s
Pr
WK6 - (Design Piero Lissoni) • 23 mm thick aluminium frame. Available versions: naturally anodised, matt white
Mirror with LED bar + 2 BOCCIA lamps. or matt black painted.
190 • Bar light: LED - 18 W per linear metre. Colour temperature: 2700° K.
23
• BOCCIA light: LED Acrich 2 dimmerable 12 W (each). Colour temperature: 2700°
K.
200 H • LED switch: dimmerable button with position LED.
• Switch of BOCCIA: dimmerable button.
150 • Drawn=left (S), mirrored=right (D).
150 • It cannot be rotated.
L
L P H
230 V - 50 Hz, Europe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 23 900 OMAD06 S-D
110 V - 60 Hz, USA... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 23 900 OMAD11 S-D
L P H
Not recessed version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 160 1200 OSAC05
Recessed version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 160 1200 OSAC06
Not recessed version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 160 1600 OSAC07
Recessed version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 160 1600 OSAC08
500
L P H
Not recessed version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 160 500 OSAC01
Recessed version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 160 500 OSAC02
Not recessed version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 160 500 OSAC03
Recessed version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 160 500 OSAC04
L = Width
P = Depth
H = Height
Pr = Price code
18.4 01/2018
M i r r o r s
Pr
INDEX - (Design Felicia Ferrone - 2012) • Cylinder-shaped structure in satin stainless steel.
Double-sided mirror. • Mirrors mounted on rotating support.
150 • Side 1: plane mirror ø 200 mm.
• Side 2: 2 x magnifying mirror ø 200 mm.
Ø 220
• Customisations are not feasible.
L P H
................................................................................... 220 150 220 OIAB01
200
L P H
................................................................................... 200 63 200 OJAQ01
160 160 29
800÷1200
L P H
Min 0,64 m² - max 0,9 m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC01
Min 0,91 m² - max 1,2 m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC02
Min 1,21 m² - max 1,44 m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC03
200 200 29
1210÷2000
L P H
Min 1,46 m² - max 1,82 m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC04
Min 1,83 m² - max 2,28 m².. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC05
Min 2,29 m² - max 2,70 m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC06
Min 2,71 m² - max 3,09 m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC07
Min 3,10 m² - max 3,40 m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC08
Min 3,41 m² - max 3,80 m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC09
Min 3,81 m² - max 4,20 m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC10
Min 4,21 m² - max 4,80 m². . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - OVMC11
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 18.5
M i r r o r s
Pr
LOTUS - (Design Naoto Fukasawa - 2014) • Lighting: LED.
Back illuminated mirror. • Absorption: OKAT07 = 12 W / OKAT08 = 20 W / OKAT10 = 20 W / OKAT09 = 40 W.
57 • Switch: please arrange the remote control.
• Colour temperature: 2700° K.
• Voltage: 110 ÷ 240 V - 50 ÷ 60 Hz (Europe/USA).
Ø520-800-1200-1600 5,5
L P H
Europe/USA version. .................................................................. 520 57 520 OKAT07
Europe/USA version. .................................................................. 800 57 800 OKAT08
Europe/USA version. .................................................................. 1200 57 1200 OKAT10
Europe/USA version. .................................................................. 1600 57 1600 OKAT09
Ø520-800-1200-1600 5,5
L P H
18 ................................................................................... 520 25 520 OKAS01
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 25 800 OKAS02
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 25 1200 OKAS04
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1600 25 1600 OKAS03
L = Width
P = Depth
H = Height
Pr = Price code
18.6 01/2018
M i r r o r s
Wood·Exclusive
Wood·Selection
Silcover
Wood
SP14 - (Design neunzig° design - 2014) • SILCOVER: all range colours
Back illuminated mirror + finished frame, th. 12 mm. • WOOD: Oak, grey graphite oak, Ash grey oak ONLY.
87 87
900 • WOOD SELECTION: Core walnut ONLY.
1200 • WOOD EXCLUSIVE: Abonos oak.
887
• Lighting: LED, low consumption.
900
580
• Absorption: 1200x900 = 80 W / 1800x900 = 120 W / 900x1200 = 80 W.
770 1200
• Switch: please arrange the remote control.
1070
• Colour temperature: 2700° K.
243 OQAL01 • Voltage: 110 ÷ 240 V - 50 ÷ 60 Hz (Europe/USA).
236
87
OQAL03
1800
900
580
1670
243
OQAL02
L P H
Europe/USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 87 900 OQAL01
1670
18
L P H
Europe/USA version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 87 1800 OQAL04
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 18.7
M i r r o r s
Pr
LEDLINE - (Design C.R.S. Boffi - 2015). • 31 mm. thick aluminium frame. Available versions: naturally anodised, matt white
Customised horizontal mirror WITH SHELF, with single LED bar. or matt black painted.
31 • Lighting: LED.
• Voltage: 230 V - 50 Hz, Europe / 110 V - 60 Hz, USA.
• Max. power: 10 W per linear metre.
H • Colour temperature: 2700° K.
• Switch: please arrange the remote control.
100 • Removable shelf, to be applied during the assembly.
L P H
Price per linear metre (for L size) -
L min 900 mm / max 1800 mm - H min 500 mm / max 700 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 131 - OLBA001
LEDLINE - (Design C.R.S. Boffi - 2015). • Lamp can be installed on top side and can rotate 90° (counter-clockwise or not).
Customised reversible mirror, with single LED bar. • 31 mm. thick aluminium frame. Available versions: naturally anodised, matt white
or matt black painted.
31 90° • Lighting: LED.
• Voltage: 230 V - 50 Hz, Europe / 110 V - 60 Hz, USA.
• Max. power: 10 W per linear metre.
H • Colour temperature: 2700° K.
90° • Switch: please arrange the remote control.
18
L P H
Price per linear metre (for L size) -
L min 900 mm / max 3000 mm - H min 400 mm / max 650 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 31 - OLBB001
L = Width
P = Depth
H = Height
Pr = Price code
18.8 01/2018
M i r r o r s
Pr
SOLSTICE - (Design Piero Lissoni - 2017) • Rear support in black painted MDF.
Oval mirror. • Customisations are NOT feasible.
1000
• During the installation it can be rotated and fixed in the wished position.
1500
NEW
L P H
................................................................................... 1000 23 1500 OSBV01
SOLSTICE - (Design Piero Lissoni - 2017) • Rear support in black painted MDF.
Oval mirror. • Customisations are NOT feasible.
600
• During the installation it can be rotated and fixed in the wished position.
1100
NEW
L P H
................................................................................... 600 23 1100 OSBV02
SOLSTICE - (Design Piero Lissoni - 2017) • Rear support in black painted MDF.
Oval mirror. • Customisations are NOT feasible.
600
• During the installation it can be rotated and fixed in the wished position.
18
1600
NEW
L P H
................................................................................... 600 23 1600 OSBV03
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 18.9
M i r r o r s
Pr
SOLSTICE - (Design Piero Lissoni - 2017) • Rear support in black painted MDF.
Triangular mirror. • Customisations are NOT feasible.
• During the installation it can be rotated and fixed in the wished position.
752
1200
NEW
L P H
................................................................................... 1200 23 752 OSBG01
SOLSTICE - (Design Piero Lissoni - 2017) • Rear support in black painted MDF.
Round mirror. • Customisations are NOT feasible.
Ø1000
NEW
L P H
18 ................................................................................... 1000 23 1000 OSBT01
L = Width
P = Depth
H = Height
Pr = Price code
18.10 01/2018
M i r r o r s
Pr
MERCURY - (Design Claesson - Koivisto - Rune - 2004) • 25 mm thick stratified glass.
Mirror. • Stainless steel frame.
• Customisations are not feasible.
500
500
STAGE - (Design Piero Lissoni - 2006) • T5 back lights, low consumption. Touch twilight switch.
Back illuminated mirror + frontal lamps. • Globalux incandescent frontal lights, E27 (Europe) - E26 (US), max 60 W. Sensor
touch switch and dimmer.
110 60 • S = lamps on left side, D = lamps on right side.
110 60
235
235
1800 160 600 2400
160 600
IP
21 AVAILABLE UNTIL STOCK LASTS
L P H
230 V - 50 Hz, Europe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 60 600 OGAL01 S-D
110 V - 60 Hz, USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 60 600 OGAL02 S-D
230 V - 50 Hz, Europe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 60 600 OGAL03 S-D
110 V - 60 Hz, USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 60 600 OGAL04 S-D
18
STAGE - (Design Piero Lissoni - 2006) • T5 back lights, low consumption. Touch twilight switch.
Back illuminated mirror + frontal lamps. • Globalux incandescent frontal lights, E27 (Europe) - E26 (US), max 60 W. Sensor
110 60 touch switch and dimmer.
110 60
• S = lamps on left side, D = lamps on right side.
385
385
1500
1200
1800 160 160
1200
L P H
230 V - 50 Hz, Europe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 60 1200 OGAL05 S-D
110 V - 60 Hz, USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 60 1200 OGAL06 S-D
230 V - 50 Hz, Europe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 60 1500 OGAL07 S-D
110 V - 60 Hz, USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 60 1500 OGAL08 S-D
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 18.11
A c c e s s o r i e s
RL 11 (Design Ludovica and Roberto Palomba - 1999)
Pr Pr
RL 11 - Soap holder. RL 11 - Soap holder.
120 120
150 150
40 40
150 135
150
300 19
80 80
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 19.3
A c c e s s o r i e s
RL 11 (Design Ludovica and Roberto Palomba - 1999)
Pr Pr
RL 11 - Shelf. RL 11 - Clothes hook.
120
60
40
600 90 100
RL 11 - Storage tray.
120
300
40
19
L = Width
P = Depth
H = Height
Pr = Price code
19.4 01/2018
A c c e s s o r i e s
MINIMAL (Design Giulio Gianturco - 2002)
Pr Pr
MINIMAL - Soap holder. MINIMAL - Soap holder.
80
130
10
10 25
130
80
Satin stainless steel, top-mounted. . . . . . . . . . . . . . KIMSA01 Satin stainless steel, wall-mounted. . . . . . . . . . . . . . KIMSA02
137
140
145
Ø70
Satin stainless steel, floor-mounted or wall-mounted. KIMSP01 Satin stainless steel, wall-mounted. . . . . . . . . . . . . . KIMRT01
80
410
300-450-600
19
Ø 70
Satin stainless steel, wall-mounted. L 300. . . . . . . . KIMSV01 Satin stainless steel, floor-mounted or wall-mounted. KIMSC01
Satin stainless steel, wall-mounted. L 450.. . . . . . . . KIMSV02
Satin stainless steel, wall-mounted. L 600.. . . . . . . . KIMSV03
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 19.5
A c c e s s o r i e s
MINIMAL (Design Giulio Gianturco - 2002)
Pr Pr
MINIMAL - Extendable magnifying mirror. MINIMAL - Bathrobe hook.
235
Ø200
80
35
465
70
min. 150
max. 650
Satin stainless steel, wall-mounted. . . . . . . . . . . . . . KIMSE01 Satin stainless steel, wall-mounted. . . . . . . . . . . . . . KIMBT01
35
Ø16 55
85
Satin stainless steel, wall-mounted. . . . . . . . . . . . . . KIMBT02 Satin stainless steel, wall-mounted. . . . . . . . . . . . . . KIMBT03
125 145
Ø30
19 40
Satin stainless steel, wall-mounted. . . . . . . . . . . . . . KIMBT04 Satin stainless steel, wall-mounted. . . . . . . . . . . . . . KIMRV01
L = Width
P = Depth
H = Height
Pr = Price code
19.6 01/2018
A c c e s s o r i e s
MINIMAL (Design Giulio Gianturco - 2002)
Pr Pr
MINIMAL - Towel rack. MINIMAL - Free-standing towel holder.
800
270
640
390 410 300
Satin stainless steel, wall-mounted. . . . . . . . . . . . . . KIMSV04 Satin stainless steel, top-mounted. . . . . . . . . . . . . . KIMSV06
500
400 740
145
200
Satin stainless steel, wall-mounted. . . . . . . . . . . . . . KIMSV05 Satin stainless steel, top-mounted. . . . . . . . . . . . . . KIMSV08
500
160
700
19
330 Ø60
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 19.7
A c c e s s o r i e s
MINIMAL (Design Giulio Gianturco - 2002)
Pr
MINIMAL - Foldable clothes-drier FOR 4 coat hangers.
25
80
355
19
L = Width
P = Depth
H = Height
Pr = Price code
19.8 01/2018
A c c e s s o r i e s
TWIG (Design Keiji Takeuchi - 2016)
Accessories in Iroko solid wood, white Cristalplant® and stainless steel treated with PVD coating technology or painted.
PVD = Physical Vapour Deposition.
Elements in PVD finish may present some tone differences. These issues cannot be considered cause for a complaint.
Pr Pr
TWIG - Soap holder. TWIG - Tray.
130 120
240
17
17
90
134 65
124 80
240
54
White + Iroko, wall-mounted. . . . . . . . . . . . . . . . . . . KPWME01 19,3 Grey PVD + Iroko wood, wall-mounted - L 300 mm. KLWSV01
Grey PVD + Iroko wood, wall-mounted - L 400 mm.. KLWSV02
Grey PVD + Iroko wood, wall-mounted - L 600 mm.. KLWSV03
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 19.9
A c c e s s o r i e s
TWIG (Design Keiji Takeuchi - 2016)
Accessories in Iroko solid wood, white Cristalplant® and stainless steel treated with PVD coating technology or painted.
PVD = Physical Vapour Deposition.
Elements in PVD finish may present some tone differences. These issues cannot be considered cause for a complaint.
Pr Pr
TWIG - Free standing towel holder. TWIG - Toilet brush holder.
510
470
275 85
• Rods in solid Iroko wood.Base in stainless steel treated with grey PVD tech- • Body in stainless steel, matt white painted.
nology • Handle in solid Iroko wood.
• Anti-slip bottom made of EPDM rubber.
Grey PVD + Iroko wood.. . . . . . . . . . . . . . . . . . . . . . KLWSV05 White + Iroko, floor- or wall-mounted. . . . . . . . . . . . KVWSC01
TWIG - Toilet roll holder. TWIG - Toilet roll holder with towel holder
80 80
170
65
380
65
• Support in stainless steel, treated with grey PVD technology. • Support in stainless steel, treated with grey PVD technology.
• Rod in solid Iroko wood. • Rod in solid Iroko wood.
Grey PVD + Iroko wood.. . . . . . . . . . . . . . . . . . . . . . KLWRT01 Grey PVD + Iroko wood.. . . . . . . . . . . . . . . . . . . . . . KLWSV04
50
19 435
140
L = Width
P = Depth
H = Height
Pr = Price code
19.10 01/2018
A c c e s s o r i e s
TWIG (Design Keiji Takeuchi - 2016)
Accessories in Iroko solid wood, white Cristalplant® and stainless steel treated with PVD coating technology or painted.
PVD = Physical Vapour Deposition.
Elements in PVD finish may present some tone differences. These issues cannot be considered cause for a complaint.
Pr
TWIG - Small table.
400
15
585
600
275
19
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 19.11
A c c e s s o r i e s
BLADE (Design Gianluigi Landoni - 2002)
Accessories in AISI 304 stainless steel, th. 4 mm - Polished / satin / grey PVD finish.
PVD = Physical Vapour Deposition.
Elements in PVD finish may present some tone differences. These issues cannot be considered cause for a complaint.
Pr Pr
BLADE - Soap holder. BLADE - Soap holder.
94 80
36 28 160
160
Polished stainless steel, wall-mounted. . . . . . . . . . . KIBSA01 Polished stainless steel, top-mounted.. . . . . . . . . . . KIBSA02
Satin stainless steel, wall-mounted.. . . . . . . . . . . . . KIBSA03 Satin stainless steel, top-mounted.. . . . . . . . . . . . . . KIBSA04
Grey PVD, wall-mounted. . . . . . . . . . . . . . . . . . . . . . KIBSA05 Grey PVD, top-mounted. . . . . . . . . . . . . . . . . . . . . . KIBSA06
94 Ø 76
160 110
110
19
Polished stainless steel, wall-mounted. . . . . . . . . . . KIBSV05 Polished stainless steel, wall-mounted. L 320.. . . . . KIBSV04
Satin stainless steel, wall-mounted.. . . . . . . . . . . . . KIBSV12 Satin stainless steel, wall-mounted. L 320.. . . . . . . . KIBSV11
Grey PVD, wall-mounted. . . . . . . . . . . . . . . . . . . . . . KIBSV17 Grey PVD, wall-mounted. L 320. . . . . . . . . . . . . . . . KIBSV15
Polished stainless steel, wall-mounted. L 450.. . . . . KIBSV03
Satin stainless steel, wall-mounted. L 450. . . . . . . . KIBSV10
Grey PVD, wall-mounted. L 450. . . . . . . . . . . . . . . . KIBSV16
L = Width
P = Depth
H = Height
Pr = Price code
19.12 01/2018
A c c e s s o r i e s
BLADE (Design Gianluigi Landoni - 2002)
Accessories in AISI 304 stainless steel, th. 4 mm - Polished / satin / grey PVD finish.
PVD = Physical Vapour Deposition.
Elements in PVD finish may present some tone differences. These issues cannot be considered cause for a complaint.
Pr Pr
BLADE - Towel holder. BLADE - Toilet roll holder.
64 76
24
215
24
Polished stainless steel, wall-mounted. L 620.. . . . . KIBSV02 Polished stainless steel, wall-mounted. . . . . . . . . . . KIBSV06
Satin stainless steel, wall-mounted. L 620.. . . . . . . . KIBSV09 Satin stainless steel, wall-mounted.. . . . . . . . . . . . . KIBSV13
Grey PVD, wall-mounted. L 620. . . . . . . . . . . . . . . . KIBSV18 Grey PVD, wall-mounted. . . . . . . . . . . . . . . . . . . . . . KIBRT01
Polished stainless steel, wall-mounted. L 820.. . . . . KIBSV01
Satin stainless steel, wall-mounted. L 820. . . . . . . . KIBSV08
Grey PVD, wall-mounted. L 820. . . . . . . . . . . . . . . . KIBSV19
Polished stainless steel, wall-mounted. . . . . . . . . . . KIBBT01 Polished stainless steel, wall-mounted. . . . . . . . . . . KIBBT02
Satin stainless steel, wall-mounted.. . . . . . . . . . . . . KIBBT03 Satin stainless steel, wall-mounted.. . . . . . . . . . . . . KIBBT04
Grey PVD, wall-mounted. . . . . . . . . . . . . . . . . . . . . . KIBBT05 Grey PVD, wall-mounted. . . . . . . . . . . . . . . . . . . . . . KIBBT06
24 320
L
19
24
Polished stainless steel, wall-mounted. . . . . . . . . . . KIBME01 Polished stainless steel, wall-mounted. L 320.. . . . . KIBME02
Satin stainless steel, wall-mounted.. . . . . . . . . . . . . KIBME05 Satin stainless steel, wall-mounted. L 320.. . . . . . . . KIBME06
Grey PVD, wall-mounted. . . . . . . . . . . . . . . . . . . . . . KIBME09 Grey PVD, wall-mounted. L 320. . . . . . . . . . . . . . . . KIBME10
Polished stainless steel, wall-mounted. L 620.. . . . . KIBME03
Satin stainless steel, wall-mounted. L 620. . . . . . . . KIBME07
Grey PVD, wall-mounted. L 620. . . . . . . . . . . . . . . . KIBME11
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 19.13
A c c e s s o r i e s
BLADE (Design Gianluigi Landoni - 2002)
Accessories in AISI 304 stainless steel, th. 4 mm - Polished / satin / grey PVD finish.
PVD = Physical Vapour Deposition.
Elements in PVD finish may present some tone differences. These issues cannot be considered cause for a complaint.
Pr Pr
BLADE - Corner shower shelf. BLADE - Toilet brush holder.
164 150
24 Ø6
420
9 60
10
80 80
Polished stainless steel, wall-mounted. . . . . . . . . . . KIBME04 Polished stainless steel, floor-mounted or wall-mounted. KIBSC01
Satin stainless steel, wall-mounted.. . . . . . . . . . . . . KIBME08 Satin stainless steel, floor-mounted or wall-mounted... . . KIBSC02
Grey PVD, wall-mounted. . . . . . . . . . . . . . . . . . . . . . KIBME12 Grey PVD, wall-mounted. . . . . . . . . . . . . . . . . . . . . . . . . . KIBSC03
274 P
12
155
620
138
65
400 238
19 126
Ø153
• Swing lid.
Polished stainless steel, top-mounted.. . . . . . . . . . . KIBRF01 Polished stainless steel, top-mounted.. . . . . . . . . . . KIBKL01
Satin stainless steel, top-mounted.. . . . . . . . . . . . . . KIBRF02 Satin stainless steel, top-mounted.. . . . . . . . . . . . . . KIBKL02
L = Width
P = Depth
H = Height
Pr = Price code
19.14 01/2018
A c c e s s o r i e s
BLADE (Design Gianluigi Landoni - 2002)
Accessories in AISI 304 stainless steel, th. 4 mm - Polished / satin / grey PVD finish.
PVD = Physical Vapour Deposition.
Elements in PVD finish may present some tone differences. These issues cannot be considered cause for a complaint.
Pr
BLADE - Makeup pads holder.
200
Ø64
19
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 19.15
A c c e s s o r i e s
PIPE (Design Marcel Wanders - 2015)
Pr Pr
PIPE - Toilet roll holder. PIPE - Towel holder.
36,5
135
Ø25
Ø16
Ø119
Ø88
Satin stainless steel + red. . . . . . . . . . . . . . . . . . . . . KIPRT01 Satin stainless steel + red. . . . . . . . . . . . . . . . . . . . . KIPSV01
Ø16
Ø69
• Details in red.
19
L = Width
P = Depth
H = Height
Pr = Price code
19.16 01/2018
A c c e s s o r i e s
SHORTCUT (Design Nendo - 2009)
Accessories in AISI 304 stainless steel, matt white finish, diameter 10 mm. Varnished with epoxy powder.
Pr Pr
SHORTCUT - Towel holder. SHORTCUT - Towel holder.
800
800
450
600 250
430
19
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 19.17
A c c e s s o r i e s
SKYLINE (Design neunzig° design - 2011)
Pr Pr
Wall-mounted cabinet with 2 compartments. Wall-mounted cabinet with 3 compartments.
325 325
370
800
292
280
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KNYBY01
19
L = Width
P = Depth
H = Height
Pr = Price code
19.18 01/2018
A c c e s s o r i e s
IKO (Design Kensaku Oshiro - 2014)
Accessories in AISI 304 satin stainless steel rod, diameter 12 mm. Base in Serena stone.
Pr Pr
IKO - Tall free-standing towel holder. IKO - Short free-standing towel holder.
540 342
270 211 131
850 650
100
100
ø120 ø120
124
730
650
100
ø120
19
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 19.19
W a s h b a s i n s
TOP-MOUNTED
Top-mounted. Please consider to add a cut-out on top (top-mounted washbasin), cod. ZNBA09.
Pr
A45 - (Design Victor Vasilev - 2013) • Optional drain-hole covering shelf, to be ordered separately.
Washbasin in Cristalplant®, without overflow. • SUSPENDED version available too: please order separately the supporting brack-
ets.
90
120
450 250
• Compatible siphon (to be ordered separately): ANBM002 chromium-plated /
ANBM006 stainless steel / ANBM016 grey PVD.
• Certifications: USA - Canada.
500
160
900
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 500 120 WRAQAE01
A45 STONE - (Design Victor Vasilev - 2016) • Optional drain-hole covering shelf, to be ordered separately.
Washbasin in marble, without overflow. • SUSPENDED version available too: please order separately the supporting brack-
ets.
90
120
450 250
• Compatible siphon (to be ordered separately): ANBM002 chromium-plated /
ANBM006 stainless steel / ANBM016 grey PVD.
• The stone parts are treated with water- and oil-repellent products.
500
160
900
L P H
White Carrara marble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 500 120 WMAQAE01
A45 COMPACT - (Design Victor Vasilev - 2016) • SUSPENDED version available too: please order separately the supporting brack-
Washbasin in Cristalplant®, without overflow. ets.
125
545 206
752
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 752 500 125 WRAQAE02
A45 - (Design Victor Vasilev - 2013) • Available versions: Cristalplant® / solid Canaletto walnut.
Drain-hole covering shelf.
L P H
White Cristalplant®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 433 40 WRAQAV01
Solid wood.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 433 40 WLAQAV01
NEW
L P H
A45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVBF004
A45 STONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVBF005
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 20.3
W a s h b a s i n s
TOP-MOUNTED
Top-mounted. Please consider to add a cut-out on top (top-mounted washbasin), cod. ZNBA09.
Pr
CANALE • Basin position: reversible / Dimensions: L 800 - P 436 - H 100.
Washbasin in Cristalplant®, with overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHH001
470
chromium-plated / ANHR001 stainless steel.
• Certifications: USA - Canada.
L
150
L P H
White, L from 1200 to 1600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 470 150 WRCNAE01
White, L from 1601 to 2000 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 470 150 WRCNAE02
White, L from 2001 to 2400 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 470 150 WRCNAE03
CATHINO 1 CERAMILUX® - (Design Piero Lissoni - 2011) • Set of compatible waste drain + siphon (to be ordered separately): ANHH002
Washbasin in Ceramilux®, without overflow. chromium-plated / ANHR002 stainless steel.
• Certifications: USA - Canada.
140
440 440
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440 440 140 WXCHAE01
Matt white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440 440 140 WXCHAE03
CATHINO 3 CERAMILUX® - (Design Piero Lissoni - 2011) • Set of compatible waste drain + siphon (to be ordered separately): ANHH002
Washbasin in Ceramilux®, without overflow. chromium-plated / ANHR002 stainless steel.
• Certifications: USA - Canada.
140
600
385
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 385 140 WXCHAE02
Matt white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 385 140 WXCHAE04
FISHER ISLAND - (Design Piero Lissoni - 2016) • Set of compatible waste drain + siphon (to be ordered separately): ANHR003
20 Washbasin in Cristalplant®, without overflow. white+chromium-plated / ANHR004 white+stainless steel.
• Certifications: USA - Canada.
425
615
138
L P H
Matt white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615 425 138 WRAFAE01
White + Soft Touch grey.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615 425 138 WSAFAE01
L = Width
P = Depth
H = Height
Pr = Price code
20.4 01/2018
W a s h b a s i n s
TOP-MOUNTED
Top-mounted. Please consider to add a cut-out on top (top-mounted washbasin), cod. ZNBA09.
Pr
ICELAND - (Design Piero Lissoni - 2010) • Available versions: totally white / white + Soft touch grey.
Washbasin in Cristalplant®, without overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHR003
white+chromium-plated / ANHR004 white+stainless steel.
430
• Soft Touch: coating made of anthracite grey paint.
• Certifications: USA - Canada.
620
150
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620 430 150 WRICAE01
White + Soft Touch grey.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620 430 150 WSICAE01
SABBIA 3 - (Design Naoto Fukasawa - 2008) • Available versions: totally white / white + Soft touch grey.
Washbasin in Cristalplant®, without overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHR003
white+chromium-plated / ANHR004 white+stainless steel.
105
150
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 410 150 WRSBAC01
White + Soft Touch grey.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 410 150 WSSBAC01
GARDEN - (Design Piero Lissoni - 2016) • To be completed with drain-hole covering shelf cod. WMGAAV01 / WNGAAV01.
Washbasin in stainless steel, without overflow. • AISI 304 stainless steel sheet, grey PVD finish.
• PVD: Physical vapour Deposition.
• When used on WOOD-IN tops for GARDEN washbasin please add only the top-mounted
cut-out cod. ZNBA09 for cabinet. The top includes already the washbasin cut-out.
120 • Compatible siphon (to be ordered separately): ANBM002 chromium-plated / ANBM006
stainless steel / ANBM016 grey PVD.
• Compatible waste drain (to be ordered separately): ANHG001 stainless steel.
700
• Elements in PVD finish may present some tone differences. These issues cannot be
350 considered cause for a complaint.
L P H
Grey PVD.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 350 120 WBGAAE01
Corian®
Stone·C
Stone·D
Stone·A
Stone·B
Stone·E
GARDEN - (Design Piero Lissoni - 2016) • Versions: stone, marble, granite / Corian®.
Drain-hole covering shelf. • The internal bottom cover of the GARDEN washbasin in STONE, MARBLE, GRANITE
20
finish is cut-out from the same sheet of the top, to guarantee a continuous grain
(ONLY when it’s ordered together with WOOD-IN top for Garden washbasin).
• Stone A: available ONLY in white CARRARA marble.
• Stone B: available ONLY in Cardoso stone.
• Stone C: available ONLY in QUARTZITE SILVER.
• Stone D: available ONLY in Emperador Dark marble / Black Cosmic granite.
• Stone E: available ONLY in GREY STONE marble / Quartzite Calacatta.
L P H
Stone - Marble - Granite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - WMGAAV01
White Corian®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - WNGAAV01
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 20.5
W a s h b a s i n s
TOP-MOUNTED
Top-mounted. Please consider to add a cut-out on top (top-mounted washbasin), cod. ZNBA09.
Pr
LOTUS - (Design Naoto Fukasawa - 2014) • A top-mounted mirror (max thickness: 25 mm) can be positioned on the rear part
Washbasin in Cristalplant®, without overflow. of FLYER suspended tops ONLY.
Ø 496
• SUSPENDED version available too: please order separately the supporting struc-
92 145 100 ture WILSSS01.
• Set of compatible waste drain + siphon (to be ordered separately): ANHR003
chromium-plated / ANHR004 stainless steel.
• Certifications: USA - Canada.
Ø 520
L P H
White Cristalplant®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520 520 145 WRLSAE01
LOTUS - (Design Naoto Fukasawa - 2014) • AISI 304 stainless steel sheet.
Supporting structure for washbasin. • Only for wall assembly.
15
80
402
254
402
L P H
Stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 402 80 WILSSS01
structure.
65
700
L P H
Statuary white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 400 65 WMLDAE01
Marquinia black.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 400 65 WMLDAE02
L P H
Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - WILDSS01
L = Width
P = Depth
H = Height
Pr = Price code
20.6 01/2018
W a s h b a s i n s
TOP-MOUNTED
Top-mounted. Please consider to add a cut-out on top (top-mounted washbasin), cod. ZNBA09.
Pr
ADDA - (Design Claudio Silvestrin - 1999) • Set of compatible waste drain + siphon (to be ordered separately): ANHH001
Washbasin in Corian®, with overflow. chromium-plated / ANHR001 stainless steel.
Ø 500
170
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 500 170 WNADAE01
GOBI 1 - (Design Marcel Wanders - 2001) • Available versions: totally white / white + Soft touch grey.
Washbasin in Cristalplant®, with overflow. • SUSPENDED version available too: please order separately the supporting struc-
ture.
370
506 • Set of compatible waste drain + siphon (to be ordered separately): ANHH001
160 chromium-plated / ANHR001 stainless steel.
• Soft Touch: coating made of anthracite grey paint.
• Certifications: USA - Canada.
410
310
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506 370 160 WRGBAE01
White + Soft Touch grey.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506 370 160 WSGBAE01
GOBI 2 - (Design Marcel Wanders - 2001) • Available versions: totally white / white + Soft touch grey.
Washbasin in Cristalplant®, with overflow. • SUSPENDED version available too: please order separately the supporting struc-
ture.
420
• Set of compatible waste drain + siphon (to be ordered separately): ANHH001
980 180 chromium-plated / ANHR001 stainless steel.
• Soft Touch: coating made of anthracite grey paint.
• Certifications: USA - Canada.
925
GOBI - (Design Marcel Wanders - 2001) • Only for wall assembly. With hole for single-hole tap.
Supporting structure. 20
• A cover for tap hole is provided (in case of wall-mounted tap).
115
L
190 260
395
AVAILABLE UNTIL STOCK LASTS
L P H
Satin stainless steel, for GOBI 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 395 190 WIGBSS01
Satin stainless steel, for GOBI 2... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650 395 190 WIGBSS02
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 20.7
W a s h b a s i n s
TOP-MOUNTED
Top-mounted. Please consider to add a cut-out on top (top-mounted washbasin), cod. ZNBA09.
Pr
ADIGE - (Design Claudio Silvestrin - 1999) • The stone parts are treated with water- and oil-repellent products.
Washbasin in solid stone, without overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHH002
500 45 45 chromium-plated / ANHR002 stainless steel.
410
170
L P H
Serena stone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 500 170 WMAGAF04
PIAVE - (Design Claudio Silvestrin - 1999) • To be used with FLYER suspended tops, P. 600 mm.
Washbasin in solid stone, without overflow. • The stone parts are treated with water- and oil-repellent products.
• Set of compatible waste drain + siphon (to be ordered separately): ANHH002
Ø 550 45 45
Ø 460 chromium-plated / ANHR002 stainless steel.
230
345
Ø 185
L P H
Serena stone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 550 345 WMPVAD02
20
L = Width
P = Depth
H = Height
Pr = Price code
20.8 01/2018
W a s h b a s i n s
BUILT-IN
Built-in.
Please consider to add a cut-out on top (top-mounted washbasin), cod. ZNBA09.
Pr
SABBIA BTM • Finished visible perimeter edge H 12 mm.
Washbasin in Cristalplant®, without overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHR003
white+chromium-plated / ANHR004 white+stainless steel.
105
• Certifications: USA - Canada.
150
402
NEW
615
L P H
White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615 402 150 WRSBAF01
20
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 20.9
W a s h b a s i n s
UNDER-MOUNTED
Under-mounted. Please consider to add an under top cut-out (under-mounted washbasin), cod. ZNBA10.
The washbasin cut-out and gluing is included when tops are in CRISTALPLANT®.
For tops in STONE, MARBLE, GRANITE, COMPOSITE please consider to add under top cut-out (gluing supplied by the Customer), cod. ZNBA10
For tops in GLASS please consider to add the under top cut-out cod. ZNBA10 and the price for gluing cod. ZNBD07.
Pr
UNIVERSAL small • Compatible with tops in Cristalplant®, stone, marble, granite, composite, glass.
Washbasin in Cristalplant®, with overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHH001
450 296
chromium-plated / ANHR001 stainless steel.
• The washbasin cut-out and gluing is included when tops are in Cristalplant®.
133
178
• Certifications: USA - Canada.
360
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 296 133 WRUNAB03
UNIVERSAL big • The washbasin cut-out and gluing is included when tops are in Cristalplant®.
Washbasin in Cristalplant®, with overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHH001
700 300
chromium-plated / ANHR001 stainless steel.
• Compatible with tops in Cristalplant®, stone, marble, granite, composite, glass.
131
165
753
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 300 131 WRUNAB02
SIDEL 2 - (Design Piero Lissoni - 2011) • The washbasin cut-out and gluing is included when tops are in Cristalplant®.
Washbasin in Cristalplant®, with overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHH001
520 330
chromium-plated / ANHR001 stainless steel.
125 170 • Certifications: USA - Canada.
Ø 50
555
370
Stone·D
Stone·A
Stone·B
Stone·E
282 362
• Set of compatible waste drain + siphon (to be ordered separately): ANHH002
= 20 20 20 20 130 chromium-plated / ANHR004 stainless steel.
20
• The stone parts are treated with water- and oil-repellent products.
20
530 / 780
L P H
Small. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 282 130 WAPTAB01
Big. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 282 130 WAPTAB02
L = Width
P = Depth
H = Height
Pr = Price code
20.10 01/2018
W a s h b a s i n s
MOULDED FLUSH-MOUNTED
Pr
KUPA - (Victor Vasilev - 2015). • Compatible ONLY with 15 mm thick tops in Cristalplant® or 15+50 mm thick XILA
Moulded flush-mounted washbasin in Cristalplant®, without overflow BATH tops.
• The price includes the washbasin or the moulding process. DO NOT add the
85
134
washbasin cut-out.
• Compatible siphon (to be ordered separately): ANBM002 chromium-plated /
ANBM006 stainless steel.
• Cover for strainer waste in Cristalplant® included.
325
700
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 325 134 WZKPAJ001
SABBIA 1 - (Design Naoto Fukasawa - 2008) • Compatible ONLY with 15 mm thick tops in Cristalplant®.
Moulded flush-mounted washbasin in Cristalplant®, without overflow • The price includes the washbasin and the moulding process. DO NOT add the
washbasin cut-out.
105
150
480
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480 400 105 WRSBAB01
SABBIA 2 - (Design Naoto Fukasawa - 2008) • Compatible ONLY with 15 mm thick tops in Cristalplant®.
Moulded flush-mounted washbasin in Cristalplant®, without overflow • The price includes the washbasin and the moulding process. DO NOT add the
washbasin cut-out.
105
150
600
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 400 105 WRSBAB02
SABBIA 6 - (Design Naoto Fukasawa - 2008) • Compatible ONLY with PIANURA, FLYER and I FIUMI ST tops in Corian®.
Moulded flush-mounted washbasin in Corian®, without overflow • The price includes the washbasin and the moulding process. DO NOT add the
washbasin cut-out.
105
150
480
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480 400 105 ZTRBK01
20
SABBIA 7 - (Design Naoto Fukasawa - 2008) • Compatible ONLY with PIANURA, FLYER and I FIUMI ST tops in Corian®.
Moulded flush-mounted washbasin in Corian®, without overflow • The price includes the washbasin and the moulding process. DO NOT add the
washbasin cut-out.
105
150
600
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 400 105 ZTRBK02
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 20.11
W a s h b a s i n s
SUSPENDED
Wall-mounted.
For the suspended versions of washbasins GOBI 1 (WRGBAE01) - GOBI 2 (WRGBAE02) - L10 (WMLDAE01/2) - A45 (WRAQAE01) - LOTUS(WRLSAE01) please
see the TOP-MOUNTED washbasins (please order the washbasin and separately the supporting structures).
Pr
CANALE • Basin dimensions: L 800 - P 436 - H 100 mm.
Monobloc washbasin in Cristalplant®, with overflow. • Versions: basin on left (S) or on right (D).
470
• Set of compatible waste drain + siphon (to be ordered separately): ANHH001
chromium-plated / ANHR001 stainless steel.
L
150
• Optional tap holes, to be ordered separately.
• Certifications: USA - Canada.
L P H
White, L from 1200 to 1600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 470 150 WRCNAD01 S-D
White, L from 1601 to 2000 mm.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 470 150 WRCNAD02 S-D
White, L from 2001 to 2400 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 470 150 WRCNAD03 S-D
PHW CERAMILUX® - (Design Piero Lissoni - 2011). • Optional tap hole (to be ordered separately).
Washbasin in Ceramilux®, without overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHH002
Ø 376 chromium-plated / ANHR002 stainless steel.
10
125 • Certifications: USA - Canada.
160
450
Ø 400
Ø46
480
50
Ø35
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 480 450 WXPHAA01
Matt white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 480 450 WXPHAA03
PHW - (Design Piero Lissoni) • Drain-hole covering insert in Corian® and stainless steel supporting bracket.
Washbasin in Corian®, without overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHH002
20 80 Ø 400 20 Ø 400
chromium-plated / ANHR002 stainless steel.
100
100
450
450
Ø 35
40
L P H
White, without rear space - for tap positioning - and tap hole. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 420 450 WNPHAA01
White, with rear space - for tap positioning - and 1 tap hole.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 480 450 WNPHAA02
L = Width
P = Depth
H = Height
Pr = Price code
20.12 01/2018
W a s h b a s i n s
WITH COLUMN
Pr
PHC - (Design Piero Lissoni - 2005) • Wall-mounted.
Washbasin in Corian®, without overflow. • Drain-hole covering insert in Corian®.
374 • Set of compatible waste drain + siphon (to be ordered separately): ANHH002
chromium-plated / ANHR002 stainless steel.
900
400
L P H
White, wall-mounted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 900 WNPHAG01
900
NEW
400
L P H
White, wall-mounted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 900 WRPHAG01
White + Soft Touch grey, wall-mounted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 900 WSPHAG01
NEW
400
L P H
White, free-standing.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 900 WRPHAG02
White + Soft Touch grey, free-standing.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 900 WSPHAG02
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 20.13
W a s h b a s i n s
WITH COLUMN
Stone·D
Stone·A
PH STONE - (Design Piero Lissoni - 2017) • Wall-mounted.
Washbasin in stone, without overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHH002
374 chromium-plated / ANHR002 stainless steel.
• With plug covered in the same finish as washbasin.
• The stone parts are treated with water- and oil-repellent products.
• Stone A: available ONLY in white Carrara marble / Serena stone.
• Stone D: available ONLY in Emperador Dark marble.
900 • Weight without water: 155 kg.
400 NEW
L P H
Wall-mounted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 900 WMPHAG01
400 NEW
L P H
Free-standing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 400 900 WMPHAG02
20
L = Width
P = Depth
H = Height
Pr = Price code
20.14 01/2018
W a s h b a s i n s
WITH COLUMN
Pr
SABBIA 4 - (Design Naoto Fukasawa - 2008) • Wall-mounted.
Washbasin in Cristalplant®, without overflow. • Set of compatible waste drain + siphon (to be ordered separately): ANHR003
white+chromium-plated / ANHR004 white+stainless steel.
105
150
• Available versions: white / white + Soft touch grey.
• Soft Touch: coating made of anthracite grey paint.
• Certifications: USA - Canada.
900 SABBIA 4
410
500
L P H
White, wall-mounted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 410 900 WRSBAG02
White + Soft Touch grey, wall-mounted.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 410 900 WSSBAG02
150
SABBIA 5
410
500
L P H
White, free-standing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 410 900 WRSBAG01
White + Soft Touch grey, free-standing.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 410 900 WSSBAG01
20
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 20.15
B a t h t u b s
Pr
TEVERE - (Design Claudio Silvestrin - 1999) • In white thermoformed Corian®. Boxed in wooden crate.
Monobloc bathtub. • Equipped with stainless steel waste drain, siphon and overflow.
Ø 1900
85 85 • Weight without water: 300 kg - Water capacity: 600 ltr.
550
Ø 1100
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900 1900 550 QAVISP01
TERRA - (Design Naoto Fukasawa - 2006) • In white Cristalplant®. Boxed in wooden crate.
Monobloc bathtub. • Equipped with chromium-plated waste drain, siphon and overflow. Water supply
A-B from bathtub edge.
1510
• Weight without water: 210 kg - Water capacity: 400 ltr.
• Available without tap hole arrangement / or with tap hole and stainless steel tap
500 (including mixer and hand-shower with its mixer).
• Certifications: USA - Canada.
B A
1700
L P H
White. Without tap hole arrangement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1700 1510 500 QARISR01
White. With lateral hole and tap, A side position.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1700 1510 500 QARISR04
White. With lateral hole and tap, B side position.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1700 1510 500 QARISR05
ICELAND - (Design Piero Lissoni - 2008) • In white Cristalplant®. Boxed in wooden crate.
Monobloc bathtub. • Equipped with chromium-plated waste drain, siphon and overflow.
• Weight without water: 160 kg - Water capacity: 380 ltr.
900 • Soft Touch: coating made of anthracite grey paint.
1810 • Certifications: USA - Canada.
480
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1810 900 480 QAIISR01
White + Soft Touch grey.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1810 900 480 QAIISS01
SABBIA - (Design Naoto Fukasawa - 2008) • In white Cristalplant®. Boxed in wooden crate.
Monobloc bathtub. • Equipped with chromium-plated waste drain, siphon and overflow.
• Weight without water: 163 kg - Water capacity: 310 ltr.
950 • Certifications: USA - Canada.
1800 21
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 950 500 QAYISR01
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.3
B a t h t u b s
Pr
FISHER ISLAND - (Design Piero Lissoni + C.R.S. Boffi - 2015) • White Ceramilux®, matt. Crated in a wooden case.
Monobloc bathtub. • Equipped with chromium-plated waste drain, siphon and overflow.
• Weight without water: 98 kg - Water capacity: 290 ltr.
900 • Soft Touch: coating made of anthracite grey paint.
1650 • Certifications: USA - Canada.
475
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1650 900 475 QAFISX02
White + Soft Touch grey.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1650 900 475 QAFISS01
Stone·D
Stone·A
FISHER ISLAND STONE - (Design Piero Lissoni + C.R.S. Boffi - 2017) • Stone A: available ONLY in white Carrara marble / Serena stone.
Monobloc bathtub. • Stone D: available ONLY in Emperador Dark marble.
• In solid natural stone. Boxed in wooden crate.
999 • Weight without water: 400 kg - Water capacity: 290 ltr.
1831 • Please order separately the waste-drain with overflow in the finish wished: ANBN011
chromium-plated, ANBN012 stainless steel, ANBN013 PVD.
527
NEW
L P H
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1831 999 527 QAFISM01
Pr
Headrest for bathtub. • Made of white silicone rubber.
• Compatible with all Boffi bathtubs, SABBIA and FISHER ISLAND excluded.
• It adjusts to the bathtub shape.
100 • To be placed and fixed with adhesive tape positioned on the lower part.
21
58
297
L P H
................................................................................... 297 58 100 ANMT001
L = Width
P = Depth
H = Height
Pr = Price code
21.4 01/2018
B a t h t u b s
Pr
GOBI SMALL SIZE - (Design Marcel Wanders - 2001) • In white Cristalplant®. Boxed in wooden crate.
Monobloc bathtub. • Equipped with chromium-plated waste drain, siphon and overflow.
• Weight without water: 170 kg - Water capacity: 305 ltr.
850
• Soft Touch: coating made of anthracite grey paint.
1700
• Certifications: USA - Canada.
500
1505
750
AVAILABLE UNTIL STOCK LASTS
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1700 850 500 QAGISR02
White + Soft Touch grey.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1700 850 500 QAGISS02
21
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.5
B a t h t u b s
I FIUMI series (Design Claudio Silvestrin - 1999)
Pr
PO (Stone) • In solid natural stone. Boxed in wooden crate.
Monobloc bathtub. • Equipped with stainless steel waste drain, siphon and overflow.
1900 / 2100
• Weight without water: ca. 800 kg (QAPISM04) - ca. 900 kg (QAPISM05).
100 100 • Water capacity: 320 ltr.
550
1250
550
L P H
SERENA stone.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1900 1250 550 QAPISM04
480
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1910 1260 550 QAPISP03
21
L = Width
P = Depth
H = Height
Pr = Price code
21.6 01/2018
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
Technical features / typologies.
PENINSULA WITH PANELS: peninsula installation, with longer side against the wall
and fixed panels in Cristalplant® glued on other 3 sides. Available in 4 sizes or
customised.
CORNER WITH PANELS: for corner installation, with fixed panels in Cristalplant®
glued on 2 sides. Available in 4 sizes or customised.
NICHE WITH PANELS: for niche installation, with fixed panel in Cristalplant® glued
on 1 side. Available in 4 sizes or customised.
21
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.7
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
BUILT-IN bathtub.
1850
20
425
500
50
1950
20
425
500
95
2050
P1 P2
145
980
690
20
425
500
145
P3 P4
2050
P1 P2
1250
690
20
425
500
P3 P4
280
X
min 50 / max 280
P1 P2
min 790 / max 1250
690
Y
20
425
500
21 P3 P4
Y1
X1 1650 X2
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• The customised bathtub must have on the order the X, Y, X1, X2, Y1 and Y2 dimensions. Orders without dimensions are not accepted.
L = Width
P = Depth
H = Height
Pr = Price code
21.8 01/2018
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
BUILT-IN bathtub.
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Upper/under-mounted installation, walling and panelling supplied by the customer.
Pr
BUILT-IN bathtub.
790
1850
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1850 790 500 QAWSSR01
880
1950
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1950 880 500 QAWSSR02
980
2050
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050 980 500 QAWSSR03
1250
2050
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050 1250 500 QAWSSR04
Y1
Y
690 • Feasible sizes:
• X = min 1750 mm, max 2050 mm / Y = min 790 mm, max 1250 mm.
X Y2 21
• X1 and X2 = min 50 mm, max 200 mm. / Y1 and Y2 = min 50 mm, max 280 mm.
• In the order please ALWAYS specify the right X, Y , X1, X2, Y1, Y2 dimensions.
X1 • The X1, X2, Y1 and Y2 sizes can be different from each other, considering always the min. and
max. allowed dimensions.
• With deck-mounted tap, Y1 or Y2 min. 100 mm.
500
1650
X2
L P H
White, CUSTOMISED SIZE. . . . . . . . . . . - - 500 QAWSSR05
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.9
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
FREE-STANDING bathtub WITH PANELS.
1850
20
425
500
70
1950
20
425
500
95
2050
P1 P2
980
690
20
425
500
145
P3 P4
2050
P1 P2
1250
690
20
425
500
P3 P4
280
X
min 70 / max 280
P1 P2
min 830 / max 1250
690
Y
20
425
500
21 P3 P4
Y1
X1 1650 X2
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• The customised bathtub must have on the order the X, Y, X1, X2, Y1 and Y2 dimensions. Orders without dimensions are not accepted.
L = Width
P = Depth
H = Height
Pr = Price code
21.10 01/2018
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
FREE-STANDING bathtub WITH PANELS.
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Covering panels on 4 sides.
Pr
FREE-STANDING bathtub WITH PANELS.
830
1850
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1850 830 500 QAWISR01
880
1950
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1950 880 500 QAWISR02
980
2050
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050 980 500 QAWISR03
1250
2050
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050 1250 500 QAWISR04
Y1
Y
690 • Feasible sizes:
• X = min 1790 mm, max 2050 mm / Y = min 830 mm, max 1250 mm.
X Y2 21
• X1 and X2 = min 70 mm, max 200 mm. / Y1 and Y2 = min 70 mm, max 280 mm.
• In the order please ALWAYS specify the right X, Y , X1, X2, Y1, Y2 dimensions.
X1 • The X1, X2, Y1 and Y2 sizes can be different from each other, considering always the min. and
max. allowed dimensions.
• With deck-mounted tap, Y1 or Y2 min. 100 mm.
500
1650
X2
L P H
White, CUSTOMISED SIZE. . . . . . . . . . . - - 500 QAWISR05
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.11
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
PENINSULA bathtub WITH PANELS.
1850
20
425
500
50
1950
20
425
500
95
2050
P1 P2
980
690
20
425
500
145
P3 P4
2050
P1 P2
1250
690
20
425
500
P3 P4
280
X
min 50 / max 280
P1 P2
min 790 / max 1250
690
Y
20
425
500
21 P3 P4
Y1
X1 1650 X2
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• The customised bathtub must have on the order the X, Y, X1, X2, Y1 and Y2 dimensions. Orders without dimensions are not accepted.
L = Width
P = Depth
H = Height
Pr = Price code
21.12 01/2018
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
PENINSULA bathtub WITH PANELS.
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Covering panels on 3 sides. The longer side with overflow is always against the wall.
Pr
PENINSULA bathtub WITH PANELS.
790
1850
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1850 790 500 QAWPER01
880
1950
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1950 880 500 QAWPER02
980
2050
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050 980 500 QAWPER03
1250
2050
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050 1250 500 QAWPER04
Y1
Y
690
• Feasible sizes:
• X = min 1750 mm, max 2050 mm / Y = min 790 mm, max 1250 mm.
X Y2 21
• X1 and X2 = min 50 mm, max 200 mm. / Y1 and Y2 = min 50 mm, max 280 mm.
• In the order please ALWAYS specify the right X, Y , X1, X2, Y1, Y2 dimensions.
X1 • The X1, X2, Y1 and Y2 sizes can be different from each other, considering always the min. and
max. allowed dimensions.
• With deck-mounted tap, Y1 or Y2 min. 100 mm.
500
1650
X2 L P H
White, CUSTOMISED SIZE. . . . . . . . . . . - - 500 QAWPER05
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.13
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
CORNER bathtub WITH PANELS.
1850
20
425
500
50
1950
20
425
500
95
2050 2050
P1 P2 P1 P2 145
145
425
980
690
690
980
20
145
145
500
P3 P4 P3 P4
2050 2050
280
P1 P2 P1 P2
425
1250
1250
690
690
20
P3 P4 P3 P4
500
280
280
Customised.
X X
min 50 / max 280
Y2
P1 P2 P1 P2
425
min 790 / max 1250
690
Y
Y
min 50 / max 280
20
21 P3 P4 P3 P4
500
Y1
Y1
X1 1650 X2 X2 1650 X1
min 50 / max 200 min 50 / max 200 min 50 / max 200 min 50 / max 200
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• The customised bathtub must have on the order the X, Y, X1, X2, Y1 and Y2 dimensions. Orders without dimensions are not accepted.
L = Width
P = Depth
H = Height
Pr = Price code
21.14 01/2018
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
CORNER bathtub WITH PANELS.
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Covering panels on 2 sides. The longer side with overflow is always against the wall.
Pr
CORNER bathtub WITH PANELS.
• Drawn=right (D).
790
1850
500
S
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1850 790 500 QAWANR01 S-D
D
1950
500
S
L P H
D White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1950 880 500 QAWANR02 S-D
980
• Drawn=right (D).
2050
500
S
L P H
D
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050 980 500 QAWANR03 S-D
1250
2050
• Drawn=right (D).
500
L P H
D White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050 1250 500 QAWANR04 S-D
Y1
Y
690
• Feasible sizes:
X Y2 • X = min 1750 mm, max 2050 mm / Y = min 790 mm, max 1250 mm.
21
• X1 and X2 = min 50 mm, max 200 mm. / Y1 and Y2 = min 50 mm, max 280 mm.
X2 • In the order please ALWAYS specify the right X, Y , X1, X2, Y1, Y2 dimensions.
• The X1, X2, Y1 and Y2 sizes can be different from each other, considering always the min. and
max. allowed dimensions.
500 • With deck-mounted tap, Y1 or Y2 min. 100 mm.
1650 • Drawn=right (D).
S
X1
L P H
White, CUSTOMISED SIZE. . . . . . . . . . . - - 500 QAWANR05 S-D
D
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.15
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
NICHE bathtub WITH PANELS.
1850
20
425
500
50
1950
20
425
500
95
2050
P1 P2
145
980
690
20
425
500
145
P3 P4
2050
P1 P2
1250
690
20
425
500
P3 P4
280
X
min 50 / max 280
P1 P2
min 790 / max 1250
690
Y
20
425
500
21 P3 P4
Y1
X1 1650 X2
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• The customised bathtub must have on the order the X, Y, X1, X2, Y1 and Y2 dimensions. Orders without dimensions are not accepted.
L = Width
P = Depth
H = Height
Pr = Price code
21.16 01/2018
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
NICHE bathtub WITH PANELS.
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Covering panels on 1 side. The longer side with overflow is always against the wall.
Pr
NICHE bathtub WITH PANELS.
790
1850
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1850 790 500 QAWICR01
880
1950
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1950 880 500 QAWICR02
980
2050
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050 980 500 QAWICR03
1250
2050
500
L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2050 1250 500 QAWICR04
• Feasible sizes:
Y1 • X = min 1750 mm, max 2050 mm / Y = min 790 mm, max 1250 mm.
21
Y • X1 and X2 = min 50 mm, max 200 mm. / Y1 and Y2 = min 50 mm, max 280 mm.
690 • In the order please ALWAYS specify the right X, Y , X1, X2, Y1, Y2 dimensions.
Y2 • The X1, X2, Y1 and Y2 sizes can be different from each other, considering always the min. and
X
max. allowed dimensions.
• With deck-mounted tap, Y1 or Y2 min. 100 mm.
X2
500
1650 L P H
White, CUSTOMISED SIZE. . . . . . . . . . . - - 500 QAWICR05
X1
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.17
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
Bathtub WITH OPEN-FACED COMPARTMENTS.
1800
75 1650 75
80
690
1050
20
425
500
P2 P1
280
2000
75 1650 275
80
690
1050
20
425
500
P2 P1
280
2000
275 1650 75
80
690
1050
20
425
500
P2 P1
280
2200
20
425
500
P2 P1
280
2200
P4 P3
21
1250
690
20
425
500
P2 P1
280
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• The NICHE, PENINSULA AND CORNER bathtubs can be installed free-standing too, thanks to the use of panels in white Cristalplant®, positioned on sides without
open-faced compartments.
L = Width
P = Depth
H = Height
Pr = Price code
21.18 01/2018
B a t h t u b s
SWIM C series (Design Piero Lissoni - 2010)
Bathtub WITH OPEN-FACED COMPARTMENTS.
Wood·Exclusive
Wood·Selection
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Covering panels on all sides without open-faced compart-
ments. The (S) and (D) codes indicate the exact position of the removable panel, that allows the inspection of the possible deck-mounted
Ecolak
tap. The compartment with the removable panel for inspection is less deep than the adjacent open-face compartments.
Wood
Bathtub WITH OPEN-FACED COMPARTMENTS.
500
L P H
NICHE/FREE-STANDING installation, white + finished compartments. 1800 1050 500 QAWGNF01 S-D
500
L P H
500
L P H
500
L P H
PENINSULA/FREE-STANDING installation, white + finished compartments. 2200 1050 500 QAWGPF01 S-D
• 4 open-faced compartments.
1250 21
2200
500
L P H
Free-standing installation, white + finished compartments. 2200 1250 500 QAWGIF01 S-D
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.19
B a t h t u b s
ARK (Design Naoto Fukasawa - 2015)
Technical features / typologies.
PENINSULA WITH PANELS: peninsula installation, with longer side against the wall
and fixed panels in Cristalplant® glued on other 3 sides.
CORNER WITH PANELS: for corner installation, with fixed panels in Cristalplant®
glued on 2 sides.
NICHE WITH PANELS: for niche installation, with fixed panel in Cristalplant® glued
on 1 side.
21
L = Width
P = Depth
H = Height
Pr = Price code
21.20 01/2018
B a t h t u b s
ARK (Design Naoto Fukasawa - 2015)
Customised BUILT-IN bathtub.
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Upper/under-mounted installation, walling and panelling supplied by the customer.
Pr
Customised BUILT-IN bathtub. - Technical chart.
max 80
min 1690 / max 1910
Y2
P1 P2
min 720 / max 910
720
Y
460
max 110
P3 P4
Y1
X1 1690 X2
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• On the order please indicate the X, Y, X1, X2, Y1 and Y2 dimensions. Orders without dimensions are not accepted.
X2
460
1690 L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 460 QAKSSR01
X1
21
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.21
B a t h t u b s
ARK (Design Naoto Fukasawa - 2015)
Customised FREE-STANDING bathtub WITH PANELS.
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Covering panels on 4 sides.
Pr
Customised FREE-STANDING bathtub WITH PANELS. - Technical chart.
max 80
min 1690 / max 1910
Y2
P1 P2
min 720 / max 910
720
Y
460
max 110
P3 P4
X1 1690 X2 Y1
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• On the order please indicate the X, Y, X1, X2, Y1 and Y2 dimensions. Orders without dimensions are not accepted.
Y2 • Available versions: totally white / white with panels in Soft touch grey.
Y • Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon.
720 • Covering panels on 4 sides.
Y1
• Weight without water: 212 kg - Water capacity: 225 ltr.
X
X2
460
1690 L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 460 QAKISR01
White + Soft Touch grey.. . . . . . . . . . . . . - - 460 QAKISS01
X1
21
L = Width
P = Depth
H = Height
Pr = Price code
21.22 01/2018
B a t h t u b s
ARK (Design Naoto Fukasawa - 2015)
Customised PENINSULA bathtub WITH PANELS.
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Covering panels on 3 sides.
Pr
Customised PENINSULA bathtub WITH PANELS. - Technical chart.
max 80
min 1690 / max 1910
Y2
P1 P2
min 720 / max 910
720
Y
460
max 110
P3 P4
Y1
X1 1690 X2
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• On the order please indicate the X, Y, X1, X2, Y1 and Y2 dimensions. Orders without dimensions are not accepted.
Y1 • Available versions: totally white / white with panels in Soft touch grey.
Y • Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon.
720 • Covering panels on 3 sides.
Y2
• The longer side with overflow is always against the wall.Weight without water: 188 kg - Water
X capacity: 225 ltr.
X1
460
1690 L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 460 QAKPER01
White + Soft Touch grey.. . . . . . . . . . . . . - - 460 QAKPES01
X2
21
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.23
B a t h t u b s
ARK (Design Naoto Fukasawa - 2015)
Customised CORNER bathtub WITH PANELS.
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Covering panels on 2 sides.
Pr
Customised CORNER bathtub WITH PANELS. - Technical chart.
X X
max 80
max 80
min 1690 / max 1910 min 1690 / max 1910
Y2
Y2
P1 P2 P1 P2
720
720
Y
Y
max 110
max 110
P3 P4 P3 P4
Y1
Y1
X1 1690 X2 X1 1690 X2
460
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• On the order please indicate the X, Y, X1, X2, Y1 and Y2 dimensions. Orders without dimensions are not accepted.
Y1 • Available versions: totally white / white with panels in Soft touch grey.
Y • Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon.
720 • Covering panels on 2 sides.
Y2
• The longer side with overflow is always against the wall.
X • Weight without water: 176 kg - Water capacity: 225 ltr.
• Drawn=right (D), mirrored=left (S).
X1
460
1690 L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 460 QAKANR01 S-D
White + Soft Touch grey.. . . . . . . . . . . . . - - 460 QAKANS01 S-D
X2
S
21
L = Width
P = Depth
H = Height
Pr = Price code
21.24 01/2018
B a t h t u b s
ARK (Design Naoto Fukasawa - 2015)
Customised NICHE bathtub WITH PANELS.
Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon. Covering panels on 1 side.
Pr
Customised NICHE bathtub WITH PANELS. - Technical chart.
max 80
min 1690 / max 1910
Y2
P1 P2
min 720 / max 910
720
Y
460
max 110
P3 P4
Y1
X1 1690 X2
max 110 max 110
• IMPORTANT :
• P1, P2, P3 and P4 indicate the possible deck-mounted tap positioning: please add the specific customised solution in the order. The P1 and P2 positions refer to bathtub
side with overflow, the P3 and P4 to the opposite side.
• On the order please indicate the X, Y, X1, X2, Y1 and Y2 dimensions. Orders without dimensions are not accepted.
Y1 • Available versions: totally white / white with panels in Soft touch grey.
Y • Cristalplant®, with adjustment feet, chromium-plated waste drain and siphon.
720 • Covering panels on 1 side.
Y2
• The longer side with overflow is always against the wall.
X • Weight without water: 164 kg - Water capacity: 225 ltr.
X1
460
1690 L P H
White. . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 460 QAKICR01
White + Soft Touch grey.. . . . . . . . . . . . . - - 460 QAKICS01
X2
21
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 21.25
B a t h t u b s
Holes for deck-mounted tap set for bathtub.
Pr
ARK / SWIM C - Hole for deck-mounted tap.
• Only for taps, listed as compatible.
• The compatible taps without spout should be integrated with a spout, to be cho-
sen according to the design situation. Water supply from overflow is not possible.
• Min. bathtub edge: 100 mm. (70 mm. on side with overflow for ARK bathtub).
L = Width
P = Depth
H = Height
Pr = Price code
21.26 01/2018
S a n i t a r y f i x t u r e s
XY (Design Piero Lissoni - 2012)
Pr
Suspended bidet with single hole for tap. • Weight: 23 kg.
• Compatible waste drain: ANBN001 chromium-plated / ANHG001 + ANDR002
275
230 stainless steel.
133 180
Ø 35
100
170
550 Ø 45 365
365
420
325
180
130 130
290
390
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 550 365 QSYBSC01
Matt white.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 550 365 QSYBSB01
550 365
380 Ø 100
360 420 330 360
225 225
295
390
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 550 365 QSYVSC01
Matt white.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 550 365 QSYVSB01
L P H
Glossy-white (resin).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVHA003
Matt white (resin).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVHA004
22
L P H
................................................................................... - - - AVBF003
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 22.3
S a n i t a r y f i x t u r e s
SAO2 by Galassia
Pr
Floor-mounted bidet with single hole for tap. • Weight: 27,5 kg.
• Compatible waste drain: ANBN001 chromium-plated / ANHG001 + ANDR002
330
stainless steel.
Ø 35 145 120
159
Ø 45
520
340 420 C F
180
100
205
380 450 220
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 520 420 QSSBTC01
520
54
320
355
420
100 355
180 180
320
380
110
450
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 520 420 QSSVTC01
Ø 35
stainless steel.
205
180 145
159
520 Ø 45
340 250
330 420
C F
180
S 170
120
380
120
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 520 250 QSSBSC01
54
22 520
360
100
250
420 330 360
320
220
170 220
320
380
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 520 250 QSSVSC01
L = Width
P = Depth
H = Height
Pr = Price code
22.4 01/2018
S a n i t a r y f i x t u r e s
SAO2 by Galassia
Pr
Monobloc toilet bowl. • Floor/wall drainage.
• WC weight: 34 kg.
150
• Cistern equipped with double-flow drainage mechanism.
325 • Toilet seat excluded.
240 500 920
150
640
F
420
320 100 280
180 180
290 190 80
570
380
L P H
Glossy-white. Floor-mounted toilet bowl for cistern.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 640 420 QSSVTC02
Glossy-white. Cistern.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 150 500 AVHB001
L P H
Glossy-white (resin).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVHA001
L P H
................................................................................... - - - AVBF003
22
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 22.5
S a n i t a r y f i x t u r e s
XES by Galassia
Pr
Floor-mounted bidet with single hole for tap. • Weight: 23 kg.
• Compatible waste drain: ANBN001 chromium-plated / ANHG001 + ANDR002
250 210 stainless steel.
150 100
Ø 35
140
510 420
320 Ø 45 C F
180
S
110
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 510 420 QSXBTC01
510
320 420 360
100
180 180
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 510 420 QSXVTC01
Ø 35
140
510 300
Ø 45 320 C S F
180
325
210 120 120
100
380
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 510 300 QSXBSC01
22 510
360 300 360
100
320
325
225 225
120
380
L P H
Glossy-white. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 510 300 QSXVSC01
L = Width
P = Depth
H = Height
Pr = Price code
22.6 01/2018
S a n i t a r y f i x t u r e s
XES by Galassia
Pr
Monobloc toilet bowl. • Floor/wall drainage.
• Cistern equipped with double-flow drainage mechanism.
160 290
• Toilet seat excluded.
290
500
160
660 920
495 F
420
420 280
180
380
50
100
240
580
L P H
Glossy-white. Floor-mounted toilet bowl for cistern.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 660 420 QSXVTC02
Glossy-white. Cistern.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290 160 500 AVHB003
L P H
Glossy-white (resin).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - - AVHA002
L P H
................................................................................... - - - AVBF003
22
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 22.7
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Typologies
(Design Monica Armani - 2012)
1 5
2 6
3 7
23
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.3
S h o w e r
TAPE 18 - Shower trays
t r a y s a n d s h o w e r b o x e s NEW
Pr
FIX-SIZED shower tray • Unit price.
300 = =
50 50
50 50
A B
= =
L L
= =
50 50
P P
L P H
A - Drain laterally positioned
................................................................................... 800 800 50 QDTMFP01
................................................................................... 800 1000 50 QDTMFP02
................................................................................... 800 1200 50 QDTMFP03
................................................................................... 800 1400 50 QDTMFP04
................................................................................... 800 1600 50 QDTMFP05
B - Center drain
................................................................................... 800 800 50 QDTMGP01
................................................................................... 800 1000 50 QDTMGP02
................................................................................... 800 1200 50 QDTMGP03
................................................................................... 800 1400 50 QDTMGP04
................................................................................... 800 1600 50 QDTMGP05
23
L = Width
P = Depth
H = Height
Pr = Price code
23.4 01/2018
S h o w e r
TAPE 18 - Shower trays
t r a y s a n d s h o w e r b o x e s NEW
Pr
CUSTOMISED shower tray - L 800 mm / P 800÷2500 mm • P min. 800 mm, max. 2500 mm.
= =
300
50
50
A B
=
800
50
P = 800 ÷ 2500
L P H
A - Drain laterally positioned
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 - 50 QDTMCP01
B - Center drain
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 - 50 QDTMDP01
CUSTOMISED shower tray - L 900 mm / P 800÷2500 mm • P min. 900 mm, max. 2500 mm.
= =
300
50
50
A B
=
900
50
P = 900 ÷ 2500
L P H
A - Drain laterally positioned
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 - 50 QDTMCP02
B - Center drain
Price per linear metre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 - 50 QDTMDP02
23
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.5
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Shower box
(Design Monica Armani - 2012)
Frosted·ribbed·Extralight·glass /
• 8 mm. thick tempered glass.
Transparent·smoky·grey·glass
• Crystal clear treatment (anti-drop treatment).
Extralight·transparent glass
Strip·matè·Extralight·glass
• Shaped fixing beam in satin stainless steel.
Frosted·Extralight·glass
• A SPECIFIC CUT-OUT ON THE SHOWER TRAY IS NECESSARY FOR THE INSTALLATION OF TAPE SHOWER DOORS. FOR
CUSTOMERS’ SHOWER TRAYS THE CUT-OUT IS BY CUSTOMER. THE CUSTOMISED SOLUTIONS FOR DOOR INSTALLATION
Transparent·glass
ARE INCLUDED AT NO CHARGE FOR ALL ORDERS CONCERNING TAPE 18 SHOWER TRAY + RELATIVE SHOWER BOX.
• If the shower tray is built into the wall, even only partially, cannot be used with Tape shower box. The above shall not be subject to
claims. In these cases please add the customised solution for door installation at customer’s charge.
TYPE 1 - CORNER shower box WITH DOOR - L 800 mm • Versions: fixed dimensions / customised P side.
• Entrance from side L = 800 mm.
P + 51 P + 51
H = 2100
S D
610 610
P
L = 800
625 625
L P H
For TAPE 18 tray:
800 x 800 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 800 2100 QBT1808F S-D
800 x 1000 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 1000 2100 QBT1810F S-D
800 x 1200 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 1200 2100 QBT1812F S-D
800 x 1400 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 1400 2100 QBT1814F S-D
800 x 1600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 1600 2100 QBT1816F S-D
H = 2100 P + 51 P + 51
S D
710 710
P
L = 900
725 725
L P H
For TAPE 18 tray:
900 x min 800 mm, max 999 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 900 2100 QBT1909F S-D
900 x min 1201 mm, max 1400 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 1000 2100 QBT1910F S-D
900 x min 1400 mm, max 1600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 1200 2100 QBT1912F S-D
900 x min 1401 mm, max 1600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 1400 2100 QBT1914F S-D
23
900 x min 750 mm, max 1000 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 1600 2100 QBT1916F S-D
Frosted·ribbed·Extralight·glass /
• 8 mm. thick tempered glass.
Transparent·smoky·grey·glass
• Crystal clear treatment (anti-drop treatment).
Extralight·transparent glass
Strip·matè·Extralight·glass
• Shaped fixing beam in satin stainless steel.
Frosted·Extralight·glass
• If the shower tray is built into the wall, even only partially, cannot be used with Tape shower box. The above shall not be subject to
claims. In these cases please add the customised solution for door installation at customer’s charge.
Transparent·glass
TYPE 2 - CORNER shower box WITHOUT DOOR - L 800 mm • Versions: fixed dimensions / customised P side.
• Entrance from side L = 800 mm.
I - reversibile
ENG - reversible
F - rèversible
D - reversibel
E - reversible
P + 51 P + 51
H = 2100
P
L = 800
L P H
For TAPE 18 tray:
800 x 1400 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 1400 2100 QBT2814F
800 x 1600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 1600 2100 QBT2816F
TYPE 2 - CORNER shower box WITHOUT DOOR - L 900 mm • Versions: fixed dimensions / customised P side.
• Entrance from side L = 900 mm
I - reversibile
ENG - reversible
F - rèversible
D - reversibel
E - reversible
P + 51 P + 51
H = 2100
P
L = 900
L P H
For TAPE 18 tray:
900 x min 1401 mm, max 1600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 1400 2100 QBT2914F
900 x min 750 mm, max 1000 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 1600 2100 QBT2916F
23
For customised tray:
900 x min 1400 mm, max 1600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 - 2100 QBT2916V
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.7
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Shower box
(Design Monica Armani - 2012)
Frosted·ribbed·Extralight·glass /
• 8 mm. thick tempered glass.
Transparent·smoky·grey·glass
• Crystal clear treatment (anti-drop treatment).
Extralight·transparent glass
Strip·matè·Extralight·glass
• Shaped fixing beam in satin stainless steel.
Frosted·Extralight·glass
• If the shower tray is built into the wall, even only partially, cannot be used with Tape shower box. The above shall not be subject to
claims. In these cases please add the customised solution for door installation at customer’s charge.
Transparent·glass
TYPE 3 - CORNER shower box WITHOUT DOOR - P 800 mm • Fixed dimensions.
• Entrance from side L = 1600 mm, the other shorter side is fixed P = 800 mm.
I - reversibile • Entrance side: W. 970 mm glass + entrance W. 630 mm.
ENG - reversible • * = Steel beam necessary ONLY for shower box with side L > 1399 mm. To be ordered sepa-
F - rèversible
rately (see below).
D - reversibel
* E - reversible
H = 2100
* *
970
800 851 851 800
L = 1600
P = 800
630
L P H
For TAPE 18 tray:
800 x 1600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1600 800 2100 QBT3816F
H = 2100
* *
970
900 951 951 900
L = 1600
630 P = 900
L P H
For TAPE 18 tray:
900 x min 750 mm, max 1000 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1600 900 2100 QBT3916F
Pr
CUSTOMISED SOLUTIONS AND ACCESSORIES. • ZNBC01 = price increase to be added only when the fixed side P is customised.
23
L P H
Customised fixed side (P) - Min. 750 mm / max. 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 21 2100 ZNBC01
* Extensible steel beam - Min. 750 mm / max. 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 28 28 ZNBC08
L = Width
P = Depth
H = Height
Pr = Price code
23.8 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Shower box
(Design Monica Armani - 2012)
Frosted·ribbed·Extralight·glass /
• 8 mm. thick tempered glass.
Transparent·smoky·grey·glass
• Crystal clear treatment (anti-drop treatment).
Extralight·transparent glass
Strip·matè·Extralight·glass
• Shaped fixing beam in satin stainless steel.
Frosted·Extralight·glass
• A SPECIFIC CUT-OUT ON THE SHOWER TRAY IS NECESSARY FOR THE INSTALLATION OF TAPE SHOWER DOORS. FOR
CUSTOMERS’ SHOWER TRAYS THE CUT-OUT IS BY CUSTOMER. THE CUSTOMISED SOLUTIONS FOR DOOR INSTALLATION
Transparent·glass
ARE INCLUDED AT NO CHARGE FOR ALL ORDERS CONCERNING TAPE 18 SHOWER TRAY + RELATIVE SHOWER BOX.
• If the shower tray is built into the wall, even only partially, cannot be used with Tape shower box. The above shall not be subject to
claims. In these cases please add the customised solution for door installation at customer’s charge.
TYPE 4 - CORNER shower box WITH DOOR - L 1000 ÷ 1600 mm • Fixed dimensions.
• Entrance from side L = 1000 ÷ 1600 mm, the other shorter side is fixed P = 800 / 900 mm.
• Entrance side: door L1 = 800 mm + variable fixed glass aligned with door.
• * = Steel beam necessary ONLY for shower box with side L > 1399 mm. To be ordered sepa-
rately (see below).
*
S
L1
D
* *
H = 2100 P + 51 P + 51
L
P
L1 L1
L L
L P H
For TAPE 18 tray:
800 x 1000 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 800 2100 QBT4810F S-D
800 x 1200 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 800 2100 QBT4812F S-D
800 x 1400 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1400 800 2100 QBT4814F S-D
800 x 1600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1600 800 2100 QBT4816F S-D
900 x min 1201 mm, max 1400 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 900 2100 QBT4910F S-D
900 x min 1400 mm, max 1600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 900 2100 QBT4912F S-D
900 x min 1401 mm, max 1600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1400 900 2100 QBT4914F S-D
900 x min 750 mm, max 1000 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1600 900 2100 QBT4916F S-D
Pr
CUSTOMISED SOLUTIONS AND ACCESSORIES. • ZNBC01 = price increase to be added only when the fixed side P is customised.
23
L P H
Customised fixed side (P) - Min. 750 mm / max. 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 21 2100 ZNBC01
* Extensible steel beam - Min. 750 mm / max. 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 28 28 ZNBC08
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.9
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Shower box
(Design Monica Armani - 2012)
Frosted·ribbed·Extralight·glass /
• 8 mm. thick tempered glass.
Transparent·smoky·grey·glass
• Crystal clear treatment (anti-drop treatment).
Extralight·transparent glass
Strip·matè·Extralight·glass
• Shaped fixing beam in satin stainless steel.
Frosted·Extralight·glass
• A SPECIFIC CUT-OUT ON THE SHOWER TRAY IS NECESSARY FOR THE INSTALLATION OF TAPE SHOWER DOORS. FOR
CUSTOMERS’ SHOWER TRAYS THE CUT-OUT IS BY CUSTOMER. THE CUSTOMISED SOLUTIONS FOR DOOR INSTALLATION
Transparent·glass
ARE INCLUDED AT NO CHARGE FOR ALL ORDERS CONCERNING TAPE 18 SHOWER TRAY + RELATIVE SHOWER BOX.
• If the shower tray is built into the wall, even only partially, cannot be used with Tape shower box. The above shall not be subject to
claims. In these cases please add the customised solution for door installation at customer’s charge.
TYPE 4 - CORNER shower box WITH DOOR - L 1000 ÷ 1600 mm • L : customised side.
• Entrance from side L = 1000 ÷ 1600 mm, the other shorter side is fixed P = 800 / 900 mm.
• Entrance side: door L1 = 800 mm + variable fixed glass aligned with door.
• * = Steel beam necessary ONLY for shower box with side L > 1399 mm. To be ordered sepa-
rately (see below).
*
S
L1
D
* *
H = 2100 P + 51 P + 51
L
P
L1 L1
L L
L P H
For customised tray:
800 x min 1000 mm, max 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 800 2100 QBT4812V S-D
800 x min 1201 mm, max 1400 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 800 2100 QBT4814V S-D
800 x min 1401 mm, max 1600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 800 2100 QBT4816V S-D
900 x min 1000 mm, max 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 900 2100 QBT4912V S-D
900 x min 1201 mm, max 1400 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 900 2100 QBT4914V S-D
900 x min 1401 mm, max 1600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 900 2100 QBT4916V S-D
Pr
CUSTOMISED SOLUTIONS AND ACCESSORIES. • ZNBC01 = price increase to be added only when the fixed side P is customised.
23
L P H
Customised fixed side (P) - Min. 750 mm / max. 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 21 2100 ZNBC01
* Extensible steel beam - Min. 750 mm / max. 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 28 28 ZNBC08
L = Width
P = Depth
H = Height
Pr = Price code
23.10 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Shower box
(Design Monica Armani - 2012)
Frosted·ribbed·Extralight·glass /
• 8 mm. thick tempered glass.
Transparent·smoky·grey·glass
• Crystal clear treatment (anti-drop treatment).
Extralight·transparent glass
Strip·matè·Extralight·glass
• Shaped fixing beam in satin stainless steel.
Frosted·Extralight·glass
• A SPECIFIC CUT-OUT ON THE SHOWER TRAY IS NECESSARY FOR THE INSTALLATION OF TAPE SHOWER DOORS. FOR
CUSTOMERS’ SHOWER TRAYS THE CUT-OUT IS BY CUSTOMER. THE CUSTOMISED SOLUTIONS FOR DOOR INSTALLATION
Transparent·glass
ARE INCLUDED AT NO CHARGE FOR ALL ORDERS CONCERNING TAPE 18 SHOWER TRAY + RELATIVE SHOWER BOX.
• If the shower tray is built into the wall, even only partially, cannot be used with Tape shower box. The above shall not be subject to
claims. In these cases please add the customised solution for door installation at customer’s charge.
TYPE 4 - CORNER shower box WITH DOOR - L 800 ÷ 999 mm • L : customised side.
• Entrance from side L = 800 ÷ 999 mm, the other shorter side is fixed P = 800 / 900 mm.
• Entrance side: variable door L1 = 800 ÷ 999 mm, without fixed glass aligned with door.
D S
P + 51 P + 51
H = 2100
L P
L L
L P H
For customised tray:
800 x min 800 mm, max 999 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 800 2100 QBT4809V S-D
900 x min 800 mm, max 999 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 900 2100 QBT4909V S-D
Pr
CUSTOMISED SOLUTIONS AND ACCESSORIES. • ZNBC01 = price increase to be added only when the fixed side P is customised.
23
L P H
Customised fixed side (P) - Min. 750 mm / max. 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 21 2100 ZNBC01
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.11
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Shower box
(Design Monica Armani - 2012)
Frosted·ribbed·Extralight·glass /
• 8 mm. thick tempered glass.
Transparent·smoky·grey·glass
• Crystal clear treatment (anti-drop treatment).
Extralight·transparent glass
Strip·matè·Extralight·glass
• Shaped fixing beam in satin stainless steel.
Frosted·Extralight·glass
• A SPECIFIC CUT-OUT ON THE SHOWER TRAY IS NECESSARY FOR THE INSTALLATION OF TAPE DOORS. FOR CUSTOMERS’
SHOWER TRAYS THE CUT OUT IS BY CUSTOMER. THE CUSTOMISED SOLUTIONS FOR DOOR INSTALLATION, IN THE POSITION
INDICATED ON TECHNICAL DIAGRAM OF TYPE 5 TAPE, ARE INCLUDED AT NO CHARGE FOR ALL ORDERS CONCERNING
Transparent·glass
TAPE SHOWER TRAY + RELATIVE SHOWER BOX. PLEASE SPECIFY ON THE ORDER IF YOU WOULD LIKE TO RECEIVE THE TAPE
SHOWER TRAY WITHOUT THE CUT-OUT.
• If the shower tray is built into the wall, even only partially, cannot be used with Tape shower box. The above shall not be subject to
claims. In these cases please add the customised solution for door installation at customer’s charge.
S D
H = 2100
65
65
L L
L P H
L from 750 to 999 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBT5009V S-D
TYPE 6 - Shower door for NICHE SOLUTIONS, WITH FIXED GLASS • Customised.
ALIGNED WITH DOOR • L min. 1000 mm, max. 1600 mm.
• L 800 mm door + variable fixed glass aligned with door.
• * = Steel beam necessary ONLY for shower box with side L > 1399 mm. To be ordered sepa-
rately (see below).
*
800
S D
H = 2100
* *
L - 800 L - 800
800 800
65
65
L L
L P H
L from 1000 to 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBT6012V S-D
L from 1201 to 1400 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBT6014V S-D
L from 1401 to 1600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBT6016V S-D
Pr
CUSTOMISED SOLUTIONS AND ACCESSORIES.
23
L P H
* Extensible steel beam - Min. 750 mm / max. 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 28 28 ZNBC08
L = Width
P = Depth
H = Height
Pr = Price code
23.12 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Shower box
(Design Monica Armani - 2012)
Frosted·ribbed·Extralight·glass /
• 8 mm. thick tempered glass.
Transparent·smoky·grey·glass
• Crystal clear treatment (anti-drop treatment).
Extralight·transparent glass
Strip·matè·Extralight·glass
• Shaped fixing beam in satin stainless steel.
Frosted·Extralight·glass
• If the shower tray is built into the wall, even only partially, cannot be used with Tape shower box. The above shall not be subject to
claims. In these cases please add the customised solution for door installation at customer’s charge.
Transparent·glass
TYPE 7 - Shower glass for NICHE SOLUTIONS • Fixed dimensions.
• Glass L 1000 mm.
I - reversibile • Fixing beam P 800 / 900 mm.
ENG - reversible
F - rèversible
D - reversibel
E - reversible
H = 2100
1051 1051
1000
P P
1600
600
L P H
For TAPE 18 tray:
800 x 1600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1600 800 2100 QBT7816F S-D
900 x min 750 mm, max 1000 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1600 900 2100 QBT7916F S-D
23
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.13
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Customised shower box
(Design Monica Armani - 2012)
• Corner CUSTOMISED compositions, to be used and installed on customer’s shower tray or TAPE 18 shower tray built into
Frosted·ribbed·Extralight·glass /
the wall or positioned under wall covering.
Transparent·smoky·grey·glass
• Please order separately the door and the fixed side. As an alternative to the door is possible to order the customised fixing
Extralight·transparent glass
Strip·matè·Extralight·glass
beam.
Frosted·Extralight·glass
• 8 mm. thick tempered glass.
• Crystal clear treatment (anti-drop treatment).
Transparent·glass
• Shaped fixing beam, hinges and knobs in satin stainless steel.
• A SPECIFIC CUT-OUT ON THE SHOWER TRAY IS NECESSARY FOR THE INSTALLATION OF TAPE DOORS, TO BE
ARRANGED BY CUSTOMER.
• For height reductions, if necessary, please add the price increase on door and fixed side, cod. ZNBC06.
Pr
TAPE - CUSTOMISED shower door • L min. 750 mm / L max. 999 mm.
• On the order please specify the effective L measurement, paying attention to the shower tray
parts built into the wall or “under wall covering“ (L = A - SP).
• L = dimension of the installed shower tray.
• B - Scarico centrale
• SP = recessed part of the shower tray.
• Please order separately the CUSTOMISED fixed side to complete the shower box.
2100
L = A - SP
SP
D S SP
L
A
L
A
L P H
L from 750 to 999 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 160 2100 QBTDAV01 S-D
TAPE - CUSTOMISED shower door, with fixed glass aligned with door • L min. 1000 mm / L max. 1600 mm.
• On the order please specify the effective L measurement, paying attention to the shower tray
parts built into the wall or “under wall covering“ (L = A - SP).
• L = dimension of the installed shower tray.
* • B - Scarico centrale
800 • SP = recessed part of the shower tray.
• Please order separately the CUSTOMISED fixed side to complete the shower box.
• * = Steel beam necessary ONLY for shower box with side L > 1399 mm. To be ordered sepa-
2100
rately (see below).
* *
L = A - SP
D S SP
SP
* *
A L
A
23 L P H
L from 1000 to 1200 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 160 2100 QBTDBV01 S-D
L from 1201 to 1400 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 160 2100 QBTDBV02 S-D
L from 1401 to 1600 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 160 2100 QBTDBV03 S-D
* Extensible steel beam - Min. 750 mm / max. 1200 mm . . . . . . . . . . - 28 28 ZNBC08
L = Width
P = Depth
H = Height
Pr = Price code
23.14 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Customised shower box
(Design Monica Armani - 2012)
• Corner CUSTOMISED compositions, to be used and installed on customer’s shower tray or TAPE 18 shower tray built into
Frosted·ribbed·Extralight·glass /
the wall or positioned under wall covering.
Transparent·smoky·grey·glass
• Please order separately the door and the fixed side. As an alternative to the door is possible to order the customised fixing
Extralight·transparent glass
Strip·matè·Extralight·glass
beam.
Frosted·Extralight·glass
• 8 mm. thick tempered glass.
• Crystal clear treatment (anti-drop treatment).
Transparent·glass
• Shaped fixing beam, hinges and knobs in satin stainless steel.
• A SPECIFIC CUT-OUT ON THE SHOWER TRAY IS NECESSARY FOR THE INSTALLATION OF TAPE DOORS, TO BE
ARRANGED BY CUSTOMER.
• For height reductions, if necessary, please add the price increase on door and fixed side, cod. ZNBC06.
Pr
TAPE - CUSTOMISED fixed side • L min. 750 mm / L max. 1600 mm.
• REVERSIBLE: the fixed side can be mounted closed to wall, positioned on right or left side.
• On the order please specify the effective L measurement, paying attention to the shower tray
parts built into the wall or “under wall covering“ (L = A - SP).
• L = dimension of the installed shower tray.
• B - Scarico centrale
I - reversibile
• SP = recessed part of the shower tray.
ENG - reversible
• Please order separately the CUSTOMISED door to complete the shower box.
2100 F - rèversible
D - reversibel
E - reversible
L = A - SP L = A - SP SP
SP
A SP L
A
L
L A
L P H
L from 750 to 999 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 21 2100 QBTDCV01
L from 1000 to 1200 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 21 2100 QBTDCV02
L from 1201 to 1400 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 21 2100 QBTDCV03
L from 1401 to 1600 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 21 2100 QBTDCV04
2100
L = A - SP
SP
SP
L
A
23
L
A
L P H
...................................................... - - - AVBX0MC
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.15
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Customised solutions
(Design Monica Armani - 2012)
Pr
RRDM02 FINO AD ESAURIMENTO SCORTE • % increase on shower box or door price.
< 2100
L P H
................................................................................... - - - ZNBC06
Height bigger than standard • Available ONLY for shower boxes and niche glass panels WITHOUT DOOR, TYPE 2 - 3 - 7.
• % increase on shower box or niche glass.
• H max.: 2700 mm.
> 2100
max 2700
L P H
................................................................................... - - - ZNBC07
23
L = Width
P = Depth
H = Height
Pr = Price code
23.16 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 1 - Corner shower box with door L 800 mm. FIXED DIMENSIONS.
40
H 75
H -20
1000
50 50
22 P +11 P +51
L (800) L
L -14
625 L -10
8
14
8
300 300
P (800-1000-1200-1400-1600) P -10
8
21
23
10 3,5
30
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.17
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 1 - Corner shower box with door L 900 mm. FIXED DIMENSIONS.
40
H 75
H -20
1000
50 50
22 P +11 P +51
L (900) L
L -14
725 L -10
14
8
300 300
P (900-1000-1200-1400-1600) P -10
23 21
10 3,5
30
L = Width
P = Depth
H = Height
Pr = Price code
23.18 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 1 - Corner shower box with door L 800 mm. CUSTOMISED P SIDE.
40
H 75
H -20
1000
50 50
22 P +11 P +51
L (800) L
L -14
625 L -10
8
14
8
300 300
P (750*÷1600) P -10
8
21
23
10 3,5
30
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.19
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 1 - Corner shower box with door L 900 mm. CUSTOMISED P SIDE.
40
H 75
H -20
1000
50 50
22 P +11 P +51
L (900) L
L -14
725 L -10
14
8
300 300
P (750*÷1600) P -10
23 21
10 3,5
30
L = Width
P = Depth
H = Height
Pr = Price code
23.20 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 2 - Corner shower box without door L 800 / 900 mm. FIXED DIMENSIONS.
P +51
40
H
782-882
H -20
50
22 P +11 P +51
L
L (800-900) L -14
L -10
14
8
300 300
P (1400-1600) P -10
8
21
10 3,5 23
30
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.21
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 2 - Corner shower box without door L 800 / 900 mm. CUSTOMISED P SIDE.
P +51
40
H -20 782-882
50
22 P +11 P +51
L
L (800-900) L -14
L -10
14
8
300 300
P (1400÷1600) P -10
8
21
23
10 3,5
30
L = Width
P = Depth
H = Height
Pr = Price code
23.22 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 3 - Corner shower box with glass, without door P 800 / 900 mm. FIXED DIMENSIONS.
970 P +51
40
H
612
H -20
50
L -14
P -14 P
P (800-900)
P +11 P -10
8
8
22
300 300
650 L -10
L (1600) L
3,5 21
30
10 8
23
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.23
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 4 - Corner shower box with door L 1000 ÷ 1600 mm. FIXED DIMENSIONS.
40
75 H
H -20
1000
50 50
L -14
P -14 P
P (800-900)
P +11 P -10
8
8
22
300 300
L1 (800) 50 L -10
L (1000-1200-1400-1600) L
625
3,5 21
30
23
10 8
L = Width
P = Depth
H = Height
Pr = Price code
23.24 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 4 - Corner shower box with door L 1000 ÷ 1600 mm. CUSTOMISED L SIDE.
40
75 H
H -20
1000
50 50
L -14
P -14 P
P (800-900)
P +11 P -10
8
8
22
300 300
L1 (800) 50 L -10
L (1000÷1600) L
625
3,5 21
30
23
10 8
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.25
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 4 - Corner shower box with door L 800 ÷ 900 mm. CUSTOMISED L SIDE.
172 P +51
40
75 H
H -20
1000
50 50
L -14
P
P (800-900)
P +11 P -10
8
22 8
300 300
610÷710 L -10
L (800÷900) L
605÷705
3,5 21
30
23
10 8
L = Width
P = Depth
H = Height
Pr = Price code
23.26 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 4 - Corner shower box with door L 901 ÷ 999 mm. CUSTOMISED L SIDE.
710 P +51
40
75 H
H -20
1000
50 50
L -14
P
P (800-900)
P +11 P -10
8
22 8
300 300
710 L -10
L (901÷999) L
705
3,5 21
30
23
10 8
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.27
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 5 - CUSTOMISED shower door for niche solutions, L 750 ÷ 900 mm.
40
75 H
H -20
1000
50 50
P
P
P +11 P -10
22 25
25 22 8 65
300 300
578÷728
L (750÷900) L
575÷725
23
L = Width
P = Depth
H = Height
Pr = Price code
23.28 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 5 - CUSTOMISED shower door for niche solutions, L 901 ÷ 999 mm.
40
75 H
H -20
1000
50 50
P
P
P +11 P -10
22 25
25 22 8 65
300 300
728
L (901÷999) L
725
23
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.29
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
TYPE 6 - CUSTOMISED shower door for niche solutions, with fixed glass aligned with door, L 1000 ÷ 1600 mm.
P +51
607 193
40
75 H
H -20
1000
50 50
P
P
P +11 P -10
25 8
22
25 22 65
300 300
800 832
L (1000÷1600) L
607
8
21
10 3,5
30
23
L = Width
P = Depth
H = Height
Pr = Price code
23.30 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
TAPE - Technical diagram
(Design Monica Armani - 2012)
1051
40
H -20
50
22 1010 22 870
P
P (800-900) P -14
P -10
300 300
600 1000
1600
8
21
10 3,5
30
23
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.31
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Typologies
(Design Piero Lissoni + C.R.S. Boffi - 2015)
1 4
2 5
23
L = Width
P = Depth
H = Height
Pr = Price code
23.32 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Customised shower box
(Design Piero Lissoni + C.R.S. Boffi - 2015)
Frosted·ribbed·Extralight·glass /
• IMPORTANT !!! - Please specify in the order the dimensions of the installed shower tray (for the boxes type 1/2/3/4) or the distance
Transparent·smoky·grey·glass
from a wall to the other (for the shower door type 5). Complaints due to measuring indicated before the shower tray installation will
Extralight·transparent glass
Strip·matè·Extralight·glass
not be accepted.
Frosted·Extralight·glass
• 8 mm. thick tempered glass.
• Crystal clear treatment (anti-drop treatment).
Transparent·glass
• Profiles and handle in anodised aluminium, available in black or stainless steel finishes.
• FIXED HEIGHT 2100 mm: customised heights are NOT feasible.
• Any customised dimensions require the feasibility approval by Boffi.
TYPE 1 - CORNER shower box, the door slides towards the glass fixed • Sliding door + fixed side.
panel. - L = min 1200 / max 1400 mm. • P = min 750 / max 1000 mm.
• Entrance width = 540 mm.
H = 2100
S D
L
P
540 540
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSANE01 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSANI01 S-D
TYPE 1 - CORNER shower box, the door slides towards the glass fixed • Sliding door + fixed side.
panel. - L = min 1401 / max 1800 mm. • P = min 750 / max 1000 mm.
• Entrance width = 640 mm.
H = 2100
S D
640 640
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSANE02 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSANI02 S-D
23
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.33
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Customised shower box
(Design Piero Lissoni + C.R.S. Boffi - 2015)
Frosted·ribbed·Extralight·glass /
• IMPORTANT !!! - Please specify in the order the dimensions of the installed shower tray (for the boxes type 1/2/3/4) or the distance
Transparent·smoky·grey·glass
from a wall to the other (for the shower door type 5). Complaints due to measuring indicated before the shower tray installation will
Extralight·transparent glass
Strip·matè·Extralight·glass
not be accepted.
Frosted·Extralight·glass
• 8 mm. thick tempered glass.
• Crystal clear treatment (anti-drop treatment).
Transparent·glass
• Profiles and handle in anodised aluminium, available in black or stainless steel finishes.
• FIXED HEIGHT 2100 mm: customised heights are NOT feasible.
• Any customised dimensions require the feasibility approval by Boffi.
TYPE 1 - CORNER shower box, the door slides towards the wall. - L = • Sliding door + fixed side.
min 1200 / max 1400 mm. • P = min 750 / max 1000 mm.
• Entrance width = 540 mm.
H = 2100
D S
L
P
540 540
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSANE03 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSANI03 S-D
TYPE 1 - CORNER shower box, the door slides towards the wall. - L = • Sliding door + fixed side.
min 1401 / max 1800 mm. • P = min 750 / max 1000 mm.
• Entrance width = 640 mm.
H = 2100
D S
640 640
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSANE04 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSANI04 S-D
23
L = Width
P = Depth
H = Height
Pr = Price code
23.34 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Customised shower box
(Design Piero Lissoni + C.R.S. Boffi - 2015)
Frosted·ribbed·Extralight·glass /
• IMPORTANT !!! - Please specify in the order the dimensions of the installed shower tray (for the boxes type 1/2/3/4) or the distance
Transparent·smoky·grey·glass
from a wall to the other (for the shower door type 5). Complaints due to measuring indicated before the shower tray installation will
Extralight·transparent glass
Strip·matè·Extralight·glass
not be accepted.
Frosted·Extralight·glass
• 8 mm. thick tempered glass.
• Crystal clear treatment (anti-drop treatment).
Transparent·glass
• Profiles and handle in anodised aluminium, available in black or stainless steel finishes.
• FIXED HEIGHT 2100 mm: customised heights are NOT feasible.
• Any customised dimensions require the feasibility approval by Boffi.
TYPE 3 - PENINSULA shower box. - L = min 1200 / max 1400 mm. • Sliding door + 2 fixed sides.
• P = min 750 / max 1000 mm.
• Entrance width = 540 mm.
H = 2100
S D
L
P
540 540
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSPEE01 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSPEI01 S-D
TYPE 3 - PENINSULA shower box. - L = min 1401 / max 1800 mm. • Sliding door + 2 fixed sides.
• P = min 750 / max 1000 mm.
• Entrance width = 640 mm.
H = 2100
S D
640 640
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSPEE02 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSPEI02 S-D
23
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.35
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Customised shower box
(Design Piero Lissoni + C.R.S. Boffi - 2015)
Frosted·ribbed·Extralight·glass /
• IMPORTANT !!! - Please specify in the order the dimensions of the installed shower tray (for the boxes type 1/2/3/4) or the distance
Transparent·smoky·grey·glass
from a wall to the other (for the shower door type 5). Complaints due to measuring indicated before the shower tray installation will
Extralight·transparent glass
Strip·matè·Extralight·glass
not be accepted.
Frosted·Extralight·glass
• 8 mm. thick tempered glass.
• Crystal clear treatment (anti-drop treatment).
Transparent·glass
• Profiles and handle in anodised aluminium, available in black or stainless steel finishes.
• FIXED HEIGHT 2100 mm: customised heights are NOT feasible.
• Any customised dimensions require the feasibility approval by Boffi.
TYPE 4 - Shower door for ASYMMETRICAL PENINSULA solution. - L = • Please order separately the 2 fixed sides for asymmetric peninsula composition (cod. QBSPLE01
min 1200 / max 1400 mm. / QBSPLI01).
• Entrance width = 540 mm.
S D
H = 2100
540 540
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSPFE01 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSPFI01 S-D
TYPE 4 - Shower door for ASYMMETRICAL PENINSULA solution. - L = • Please order separately the 2 fixed sides for asymmetric peninsula composition.
min 1401 / max 1800 mm. • Entrance width = 640 mm.
S D
H = 2100
640 640
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSPFE02 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSPFI02 S-D
23
L = Width
P = Depth
H = Height
Pr = Price code
23.36 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Customised shower box
(Design Piero Lissoni + C.R.S. Boffi - 2015)
Frosted·ribbed·Extralight·glass /
• IMPORTANT !!! - Please specify in the order the dimensions of the installed shower tray (for the boxes type 1/2/3/4) or the distance
Transparent·smoky·grey·glass
from a wall to the other (for the shower door type 5). Complaints due to measuring indicated before the shower tray installation will
Extralight·transparent glass
Strip·matè·Extralight·glass
not be accepted.
Frosted·Extralight·glass
• 8 mm. thick tempered glass.
• Crystal clear treatment (anti-drop treatment).
Transparent·glass
• Profiles and handle in anodised aluminium, available in black or stainless steel finishes.
• FIXED HEIGHT 2100 mm: customised heights are NOT feasible.
• Any customised dimensions require the feasibility approval by Boffi.
TYPE 4 - Fixed side for ASYMMETRICAL PENINSULA solution. - P = • Please order the 2 fixed sides (1 and 2) indicating the 2 different depths P1 and P2. Unit price,
min 300 / max 1000 mm. per each fixed side.
• Please order separately the door for asymmetric peninsula composition.
!
2
S D S D
P1 P1
P2 P2
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSPLE01 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSPLI01 S-D
TYPE 5 - Shower door for NICHE SOLUTIONS. - L = min 1200 / max • Entrance width = 540 mm.
1400 mm. • Before placing the order, carefully check the width (L) at three different height (Q1 - Q2 - Q3):
if the maximal difference among the dimensions is ) 5 mm please use the shortest one for your
order. If the difference is > 5mm please forward your drawings to Boffi for a feasibility check
and approval.
Q3
Q2
Q1
S D
H = 2100
540 540
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSICE01 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSICI01 S-D
23
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.37
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Customised shower box
(Design Piero Lissoni + C.R.S. Boffi - 2015)
Frosted·ribbed·Extralight·glass /
• IMPORTANT !!! - Please specify in the order the dimensions of the installed shower tray (for the boxes type 1/2/3/4) or the distance
Transparent·smoky·grey·glass
from a wall to the other (for the shower door type 5). Complaints due to measuring indicated before the shower tray installation will
Extralight·transparent glass
Strip·matè·Extralight·glass
not be accepted.
Frosted·Extralight·glass
• 8 mm. thick tempered glass.
• Crystal clear treatment (anti-drop treatment).
Transparent·glass
• Profiles and handle in anodised aluminium, available in black or stainless steel finishes.
• FIXED HEIGHT 2100 mm: customised heights are NOT feasible.
• Any customised dimensions require the feasibility approval by Boffi.
TYPE 5 - Shower door for NICHE SOLUTIONS. - L = min 1401 / max • Entrance width = 640 mm.
1800 mm. • Before placing the order, carefully check the width (L) at three different height (Q1 - Q2 - Q3):
if the maximal difference among the dimensions is ) 5 mm please use the shortest one for your
order. If the difference is > 5mm please forward your drawings to Boffi for a feasibility check
Q3
and approval.
Q2
Q1
S D
H = 2100
640 640
L P H
BLACK profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSICE02 S-D
STAINLESS STEEL profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - - 2100 QBSICI02 S-D
23
L = Width
P = Depth
H = Height
Pr = Price code
23.38 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Technical chart
(Design Piero Lissoni + C.R.S. Boffi - 2015)
TYPE 1 - CORNER shower box, the door slides towards the glass fixed panel. Customised.
L-6 P - 5,5
2100
5,5 17
20
P
10 8
P - 5,5
5,5 300
6 L-6
10 8 10 17
8 5,5
20
40 8
5,5 23
10
6 25
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.39
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Technical chart
(Design Piero Lissoni + C.R.S. Boffi - 2015)
TYPE 1 - CORNER shower box, the door slides towards the wall. Customised.
L-6 P -5,5
2100
5,5 17
20
P
10 8
P -5,5
5,5 300
6 L-6
8
10 8 17
10 5,5
20
40
23 10
5,5
8
6 25
L = Width
P = Depth
H = Height
Pr = Price code
23.40 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Technical chart
(Design Piero Lissoni + C.R.S. Boffi - 2015)
L -12 P -5,5
2100
5,5 17 17 5,5
20 20
P
P -5,5 10 8 8 10
5,5 300
6 L -12 6
10 8 10
8
40 8 40
10 23
5,5 5,5
10
6 25 8
25 6
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.41
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Technical chart
(Design Piero Lissoni + C.R.S. Boffi - 2015)
L - 12 P2 - 5,5
2100
5,5 17 17 5,5
20 20
P
P - 5,5
P2
P2 - 5,5
10 8 8 10
40 8 40
23 10
5,5 5,5
10 8
6 25 25 6
L = Width
P = Depth
H = Height
Pr = Price code
23.42 01/2018
S h o w e r t r a y s a n d s h o w e r b o x e s
SLIDING - Technical chart
(Design Piero Lissoni + C.R.S. Boffi - 2015)
L
Q3
Q2
2100
Q1
300
8
17 10 17
5,5 10 8 5,5
20 20
23
IMPORTANT ! :
Before placing the order, carefully check the width (L) at three different height (Q1 - Q2 - Q3): if the maximal difference among the dimensions is ) 5 mm please use the
shortest one for your order. If the difference is > 5mm please forward your drawings to Boffi for a feasibility check and approval.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 23.43
T a p s
ECLIPSE (Design Studiocharlie - 2014)
Pr Pr
Short mixer tap for washbasin. Tall mixer tap for washbasin.
130
200
Ø18
Ø18
184
324
95
Ø50
235
Ø50
• Cartridge for single lever mixers. • Cartridge for single lever mixers.
• Flow rate: 4,5 l/min. • Flow rate: 4,5 l/min.
Freestanding floor-mounted mixer tap for washbasin. Mixer tap for bidet.
200 122
Ø18
Ø18
184
1090
95
1000 Ø50
12
Ø100
• Cartridge for single lever mixers. • Cartridge for single lever mixers.
• Flow rate: 4,5 l/min. • Flow rate: 4,5 l/min.
Top-mounted mixer tap for washbasin. Wall-mounted, built-in washbasin mixer tap.
Ø80
100
Ø60
Ø60
• Compatible with all top- or wall-mounted spouts. • Cartridge for single lever mixers.
• Cartridge for single lever mixers. • Please order the spout (compulsory) separately.
• Compatible with all wall-mounted spouts.
• The spout must be ALWAYS installed on the left side of the mixer, as shown in
the drawing.
Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RERX05 Satin stainless steel, external part.. . . . . . . . . . . . . . RERX06E 24
Grey PVD.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RERX15 Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RERX16E
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RERX06I
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.3
T a p s
ECLIPSE (Design Studiocharlie - 2014)
Pr Pr
Top-mounted tap pair for washbasin. Wall-mounted, built-in tap pair for washbasin.
40
100 Ø80
40 100
Ø60
Ø80
Ø60
Ø60
• Compatible with all top- or wall-mounted spouts. • Please order the spout (compulsory) separately.
• 1/2“ ceramic screw disks, 90° opening. • Compatible with all wall-mounted spouts.
• The spout must be ALWAYS installed as shown in the drawing.
• 1/2“ ceramic screw disks, 90° opening.
Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RGRX01 Satin stainless steel, external part.. . . . . . . . . . . . . . RGRX02E
Grey PVD.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGRX06 Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RGRX07E
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGRX02I
Ø80
Ø60 160 - 230
Ø60
Ø21
50
Satin stainless steel, external part.. . . . . . . . . . . . . . RERX10E Satin stainless steel, P 160 mm.. . . . . . . . . . . . . . . . RIRX01
Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RERX20E Grey PVD, P 160 mm.. . . . . . . . . . . . . . . . . . . . . . . . RIRX07
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RERX10I Satin stainless steel, P 230 mm.. . . . . . . . . . . . . . . . RIRX02
Grey PVD, P 230 mm.. . . . . . . . . . . . . . . . . . . . . . . . RIRX08
157 157
170
Ø21 280
Ø21
113
Ø60 223
Ø60
24 Satin stainless steel, H 170 mm. . . . . . . . . . . . . . . . RIRX03 Satin stainless steel, H 280 mm. . . . . . . . . . . . . . . . RIRX04
Grey PVD, H 170 mm. . . . . . . . . . . . . . . . . . . . . . . . RIRX09 Grey PVD, H 280 mm. . . . . . . . . . . . . . . . . . . . . . . . RIRX10
L = Width
P = Depth
H = Height
Pr = Price code
24.4 01/2018
T a p s
ECLIPSE (Design Studiocharlie - 2014)
Pr Pr
Freestanding floor-mounted spout for washbasin. Freestanding floor-mounted spout for bathtub.
225 225
752
1057
695
1000
Ø21
Ø21
Ø90 Ø90
Satin stainless steel, H 1057 mm. . . . . . . . . . . . . . . RIRX05 Satin stainless steel, H 752 mm. . . . . . . . . . . . . . . . RIRX06
Grey PVD, H 1057 mm. . . . . . . . . . . . . . . . . . . . . . . RIRX11 Grey PVD, H 752 mm. . . . . . . . . . . . . . . . . . . . . . . . RIRX12
Wall-mounted, built-in tap set for shower/bathtub. Wall-mounted, built-in tap set for shower/bathtub.
100 100
Ø80 Ø80
100 100
Ø80 Ø80
Ø60 Ø60
Ø60 Ø60
• Single lever mixer tap with cartridge, 2-way diverter and hand-shower. • Single lever mixer tap with cartridge, 3-way diverter and hand-shower.
• Bathtub use: water supply to overflow. • The customer can choose to install the single elements with or without the sup-
• The customer can choose to install the single elements with or without the sup- plied washer Ø 80 mm.
plied washer Ø 80 mm.
Satin stainless steel, external part.. . . . . . . . . . . . . . RERX07E Satin stainless steel, external part.. . . . . . . . . . . . . . RERX08E
Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RERX17E Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RERX18E
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RERX07I Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RERX08I
Wall-mounted, built-in thermostatic tap set for shower. Wall-mounted, built-in thermostatic tap set for shower.
100 Ø80 100 Ø80
100 100
Ø80 Ø80
Ø60 Ø60
Ø60 Ø60
• Thermostatic mixer, 2-way diverter, hand-shower. • Thermostatic mixer, 3-way diverter, hand-shower.
• The customer can choose to install the single elements with or without the sup- • The customer can choose to install the single elements with or without the sup-
plied washer Ø 80 mm. plied washer Ø 80 mm.
Satin stainless steel, external part.. . . . . . . . . . . . . . RHRX01E Satin stainless steel, external part.. . . . . . . . . . . . . . RHRX02E 24
Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RHRX05E Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RHRX06E
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RHRX01I Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RHRX02I
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.5
T a p s
ECLIPSE (Design Studiocharlie - 2014)
Pr Pr
Built-in deck-mounted tap set for bathtub. Built-in deck-mounted tap set for bathtub. Without spout.
100 100
100 100
100 185 100 185
Ø42 Ø42
100
Ø60 Ø60
Ø60
• Cold/warm taps, spout, hand-shower with its mixer. • Cold/warm taps, hand-shower with its mixer.
• 1/2“ ceramic screw disks, 90° opening. • 1/2“ ceramic screw disks, 90° opening.
Wall-mounted, built-in tap set for bathtub. Freestanding floor-mounted bathtub tap set.
100
260
100
100
630 776
Ø120
• Single lever mixer tap with cartridge, spout, diverter and hand-shower. • Single lever mixer tap with cartridge, spout, hand-shower with its mixer.
• The customer can choose to install the single elements (spout excluded) with or
without the supplied washer Ø 80 mm.
Satin stainless steel, external part.. . . . . . . . . . . . . . RGRX05E Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RERX09
Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RGRX10E Grey PVD.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RERX19
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGRX05I
Ø60
Ø60
• Compatible with all wall-mounted shower heads or hand-showers. • With 1500 mm long hose and water connection.
24 Satin stainless steel, external part.. . . . . . . . . . . . . . . . . RHRX03E Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RJRX01
Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RHRX07E Grey PVD.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RJRX02
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RHRX03I
L = Width
P = Depth
H = Height
Pr = Price code
24.6 01/2018
T a p s
ECLIPSE (Design Studiocharlie - 2014)
Pr
Wall-mounted shower head.
72
Ø 250
24
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.7
T a p s
GARDEN (Design Piero Lissoni - 2016)
*
60
148 60 100
Ø 60
148
Ø 60
• Compatible with all top- or wall-mounted spouts. • Please order the spout (compulsory) separately.
• Progressive ceramic cartridge, 90° opening. • Compatible with all wall-mounted spouts.
• The spout must be ALWAYS installed on the left side of the mixer, as shown in
the drawing.
• * = the Ø 80 mm washer is included.
• Progressive ceramic cartridge, 90° opening.
Freestanding floor-mounted mixer tap for washbasin. Top-mounted tap pair for washbasin.
198
148 60
1153
Ø 60
1000
• Progressive ceramic cartridge, 90° opening. • Compatible with all top- or wall-mounted spouts.
• Flow rate: 4,5 l/min. • 1/2“ ceramic screw disks, 90° opening.
Wall-mounted, built-in tap pair for washbasin. Wall-mounted, built-in mixer tap for washbasin / bidet / shower.
100 * 60 60
100
Ø 60
148
* Ø 60
* 148
• Please order the spout (compulsory) separately. • Compatible with all top- or wall-mounted spouts.
• Compatible with all wall-mounted spouts. • Compatible with all wall-mounted shower heads and hand-showers.
• The spout must be ALWAYS installed as shown in the drawing. • * = the Ø 80 mm washer is included.
• * = the Ø 80 mm washer is included. • Progressive ceramic cartridge, 90° opening.
• 1/2“ ceramic screw disks, 90° opening.
24
Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RGGN02E Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . REGN04E
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGGN02I Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . REGN04I
L = Width
P = Depth
H = Height
Pr = Price code
24.8 01/2018
T a p s
GARDEN (Design Piero Lissoni - 2016)
* *
3 60
91 100
Ø80
100
Ø60
* Ø 60 148
Ø 60
90
• Mixer tap with 90° progressive cartridge, 2-way diverter and hand-shower.
• Bathtub use: water supply to overflow.
• * = the Ø 80 mm washer is included.
Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . REGN06E Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RGGN03E
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RHRX03I Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGGN03I
Wall-mounted, built-in tap set for shower. Wall-mounted, built-in thermostatic tap set for shower.
* * *
60
100 100 3
Ø 80 91
100 100
* Ø 60 148
* Ø 60
Ø 60
Ø 60
90 90
• Mixer tap with 90° progressive cartridge, 3-way diverter and hand-shower. • Thermostatic mixer, 2-way diverter, hand-shower.
• * = the Ø 80 mm washer is included. • * = the Ø 80 mm washer is included.
Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RGGN04E Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RHGN02E
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGGN04I Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RHGN02I
Wall-mounted, built-in thermostatic tap set for shower. Wall-mounted, built-in tap set for bathtub.
100 * 3 100
* * 60
*
Ø 80 91 100
100
*
100
Ø 60 148
Ø 60 * Ø 60
Ø 60
90 90
142
• Thermostatic mixer, 3-way diverter, hand-shower. • Mixer tap with 90° progressive cartridge, spout, diverter and hand-shower.
• * = the Ø 80 mm washer is included. • * = the Ø 80 mm washer is included.
24
Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RHGN03E Grey PVD, external part.. . . . . . . . . . . . . . . . . . . . . . RGGN07E
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RHGN03I Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGGN07I
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.9
T a p s
GARDEN (Design Piero Lissoni - 2016)
100
100
100 118
100
100
100
100
108
108
67
60 60
Ø 60 Ø 60
• Cold/warm taps, spout, hand-shower with its mixer. • Cold/warm taps, hand-shower with its mixer.
• 1/2“ ceramic screw disks, 90° opening. • 1/2“ ceramic screw disks, 90° opening.
Ø35
*
880
727
142 95
200
* 133
230
50 67
Ø 60
24
Grey PVD, P 230 mm.. . . . . . . . . . . . . . . . . . . . . . . . RIGN02 Grey PVD, H 133 mm. . . . . . . . . . . . . . . . . . . . . . . . RIGN03
L = Width
P = Depth
H = Height
Pr = Price code
24.10 01/2018
T a p s
GARDEN (Design Piero Lissoni - 2016)
177
90
Ø 60 225
264
*
178
Ø 60
• Flow rate: 4,5 l/min. • With 1500 mm long hose and water connection.
• * = the Ø 80 mm washer is included.
90
33-40
220 - 300
300 110
45
Ø 25 125
40
Ø 55
40
325
Ø 22
24
Grey PVD.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RRGN03 Grey PVD.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RRGN04
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.11
T a p s
PIPE (Design Marcel Wanders - 2001)
Taps in AISI 304 stainless steel - Finish: satin with red handle.
Pr Pr
Top-mounted mixer tap for washbasin. Top-mounted tap pair for washbasin.
36 Ø 70 Ø 70
36
• Compatible with all top- or wall-mounted spouts. • Compatible with all top- or wall-mounted spouts.
• Progressive ceramic cartridge, 90° opening. • 1/2“ ceramic screw disks, 90° opening.
Satin stainless steel + red. . . . . . . . . . . . . . . . . . . . . REFP03 Satin stainless steel + red. . . . . . . . . . . . . . . . . . . . . RGFP01
Wall-mounted, built-in mixer tap for washbasin / bidet / shower. Wall-mounted mixer tap for washbasin / shower.
*
70
39
Ø90
Ø83
Ø 70
Satin stainless steel + red. External part.. . . . . . . . . REFP04E Satin stainless steel + red. . . . . . . . . . . . . . . . . . . . . REFP02
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . REGN04I
Wall-mounted, built-in washbasin mixer tap. Wall-mounted, built-in tap pair for washbasin.
* *
39 39
100 100
100
Ø 70
* Ø 70
• Please order the spout (compulsory) separately. • Please order the spout (compulsory) separately.
• Compatible with all wall-mounted spouts. • Compatible with all wall-mounted spouts.
• The spout must be ALWAYS installed on the left side of the mixer, as shown in • The spout must be ALWAYS installed as shown in the drawing.
the drawing.
• * = the Ø 80 mm washer is included.1/2“ ceramic screw disks, 90° opening.
• * = the Ø 80 mm washer is included.
• Progressive ceramic cartridge, 90° opening.
Satin stainless steel + red. External part.. . . . . . . . . REFP06E Satin stainless steel + red. External part.. . . . . . . . . RGFP02E
24 Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . REGN02I Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGGN02I
L = Width
P = Depth
H = Height
Pr = Price code
24.12 01/2018
T a p s
PIPE (Design Marcel Wanders - 2001)
Taps in AISI 304 stainless steel - Finish: satin with red handle.
Pr Pr
Top-mounted mixer tap for washbasin. Freestanding floor-mounted mixer tap for washbasin.
Ø70 220
62 1150
Ø50
1000
Satin stainless steel + red. . . . . . . . . . . . . . . . . . . . . REFP01 Satin stainless steel + red. . . . . . . . . . . . . . . . . . . . . REFP05
200 175
Ø 25 Ø 25
70
55
50
150 100
220 115
50
• Flow rate: washbasin use 4,5 l/min - bathtub use 26,0 l/min. • Lockable swivel aerator.
• Flow rate: 8,6 l/min.
Satin stainless steel, H 220 mm. . . . . . . . . . . . . . . . RIFP01 Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RIFP07
Satin stainless steel, H 290 mm.. . . . . . . . . . . . . . . . RIFP02
*
25
Ø 25
70
Ø
70
1000
700
90
• Flow rate: washbasin use 4,5 l/min - bathtub use 26,0 l/min. • Flow rate: RIFP05 4,5 l/min - RIFP06 26,0 l/min.
• * = supplied Ø 80 mm washer.
Satin stainless steel, P 150 mm.. . . . . . . . . . . . . . . . RIFP03 Satin stainless steel, for washbasin - H 1070 mm.. . RIFP05 24
Satin stainless steel, P 220 mm.. . . . . . . . . . . . . . . . RIFP04 Satin stainless steel, for bathtub - H 770 mm... . . . . RIFP06
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.13
T a p s
PIPE (Design Marcel Wanders - 2001)
Taps in AISI 304 stainless steel - Finish: satin with red handle.
Pr Pr
Wall-mounted, built-in thermostatic mixer tap. Wall-mounted, built-in tap set for shower/bathtub.
* *
3
91 100 39
Ø80
100
* Ø 70
Ø60
90
• Mixer tap with 90° progressive cartridge, 2-way diverter and hand-shower.
• Bathtub use: water supply to overflow.
• * = the Ø 80 mm washer is included.
Satin stainless steel, external part.. . . . . . . . . . . . . . REFP07E Satin stainless steel + red. External part.. . . . . . . . . RGFP03E
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RHRX03I Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGGN03I
Wall-mounted, built-in tap set for shower. Wall-mounted, built-in thermostatic tap set for shower.
* *
100 3
100 39 91
Ø 80
100
100
* Ø 70
** Ø 60
90 90
• Single lever mixer tap with 90° progressive cartridge, 3-way diverter and hand- • Thermostatic mixer, 2-way diverter, hand-shower.
shower. • * = the Ø 80 mm washer is included.
• * = the Ø 80 mm washer is included.
Satin stainless steel + red. External part.. . . . . . . . . RGFP04E Satin stainless steel + red. External part.. . . . . . . . . RHFP02E
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGGN04I Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RHGN02I
Wall-mounted, built-in thermostatic tap set for shower. Freestanding floor-mounted bathtub tap set.
100 3
220
91
Ø 80
100
** Ø 60
Ø35
865
700
90
200
• Thermostatic mixer, 3-way diverter, hand-shower. • Cold/warm taps, spout, diverter, hand-shower.
• * = the Ø 80 mm washer is included. • 1/2“ ceramic screw disks, 90° opening.
24 Satin stainless steel + red. External part.. . . . . . . . . RHFP03E Satin stainless steel + red. . . . . . . . . . . . . . . . . . . . . RGFP05
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RHGN03I
L = Width
P = Depth
H = Height
Pr = Price code
24.14 01/2018
T a p s
PIPE (Design Marcel Wanders - 2001)
Taps in AISI 304 stainless steel - Finish: satin with red handle.
Pr Pr
Built-in deck-mounted tap set for bathtub. Built-in deck-mounted tap set for bathtub. Without spout.
200
100
100
100
100
100
100
100
157
36 36
Ø 70 Ø 70
• Cold/warm taps, spout, hand-shower with its mixer. • Cold/warm taps, hand-shower with its mixer.
• 1/2“ ceramic screw disks, 90° opening. • 1/2“ ceramic screw disks, 90° opening.
Satin stainless steel + red. . . . . . . . . . . . . . . . . . . . . RGFP06 Satin stainless steel + red. . . . . . . . . . . . . . . . . . . . . RGFP07
Wall-mounted, built-in tap set for bathtub. Wall-mounted spout for shower.
* *
Ø89
100 39
100
100
* * Ø 70 240
400
90 70
150
• Mixer tap with 90° progressive cartridge, spout, diverter and hand-shower. • 1/2“ connection.
• * = the Ø 80 mm washer is included. • Provided with supporting part.
• Flow rate: 16,0 l/min.
Satin stainless steel + red. External part.. . . . . . . . . RGFP08E Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RFFP01
Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGGN07I
Freestanding floor-mounted spout for shower. Freestanding floor-mounted spout with mixer for shower.
240 240
400 400
2300 2300
Ø90 Ø90
160 160
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.15
T a p s
PIPE (Design Marcel Wanders - 2001)
Taps in AISI 304 stainless steel - Finish: satin with red handle.
Pr
Wall-mounted hand shower.
90
Ø 60 225
24
L = Width
P = Depth
H = Height
Pr = Price code
24.16 01/2018
T a p s
UNI (Design C.R.S. Boffi)
Pr Pr
Mixer tap for washbasin. Mixer tap for bidet.
130
120
155 155
55
Ø50 65 Ø50
Tall mixer tap for washbasin. Free standing floor-mounted mixer tap for washbasin.
205 205
340 1025
930
250
Ø50 Ø100
24
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.17
T a p s
UNI (Design C.R.S. Boffi)
Pr Pr
Ceiling-fixed shower head. Wall-mounted shower head.
400 220
450
700
15 7
100
• RFGZ03: rain option with max flow rate of 20 l/min. • RFGZ04: rain option with max flow rate of 14 l/min.
• RFGZ02: rain option with max flow rate of 20 l/min. Aerator for massage with free
flow rate. It requires 2 dedicated ways.
• RFGZ01: rain option with max flow rate of 20 l/min. Waterfall massage option
with free flow rate. It requires 2 dedicated ways.
• The drawing and the picture are referred to the shower head cod. RFGZ01.
Satin stainless steel, rain option. . . . . . . . . . . . . . . . RFGZ03 Satin stainless steel, recessed part.. . . . . . . . . . . . . RRGZ01
Satin stainless steel, rain + aerator for massage options.. RFGZ02 Satin stainless steel, rain option, external part. . . . . RFGZ04
Satin stainless steel, rain + waterfall options. . . . . . RFGZ01
7
100
24
L = Width
P = Depth
H = Height
Pr = Price code
24.18 01/2018
T a p s
MINIMAL (Design Giulio Gianturco - 2002)
Pr Pr
Mixer tap for washbasin and bidet. Wall-mounted, built-in tap pair
Ø 60
58 40
Ø20 47 104
85
140
40/190/270
• Flow rate: 8,4 l/min. • Please order the spout or the shower head separately.
• Compatible with all top- or wall-mounted spouts.
• Compatible with all wall-mounted shower heads or hand-showers.
• Ceramic screw disks, 90° opening.
• Flow rate: 16,0 l/min.
REDM07: UNTIL STOCK LASTS
Satin stainless steel, spout H 125 mm. . . . . . . . . . . REDM02 Recessed part.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGDM08I
Satin stainless steel, spout H 275 mm.. . . . . . . . . . . REDM01 Satin stainless steel, external part.. . . . . . . . . . . . . . RGDM08E
Satin stainless steel, spout H 355 mm.. . . . . . . . . . . REDM07
Top-mounted mixer tap for washbasin. Wall-mounted mixer tap for washbasin / shower.
Ø 70 81
60
59,5
100
• Compatible with all top- or wall-mounted spouts. • Flow rate: 16,0 l/min.
• 3/8“ connection.
• With hoses.
• Flow rate: 12,0 l/min.
95 135
Ø 55
Ø20
45
15/165/260
50
Satin stainless steel, H 110 mm. . . . . . . . . . . . . . . . RIDM04 Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RRDM07 24
Satin stainless steel, H 260 mm.. . . . . . . . . . . . . . . . RIDM03
Satin stainless steel, H 355 mm.. . . . . . . . . . . . . . . . RIDM10
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.19
T a p s
MINIMAL (Design Giulio Gianturco - 2002)
Pr Pr
Wall-mounted spout for washbasin. Top-mounted tap for washbasin.
210/250
Ø 60 260
Ø 20
50
160
75
110
Satin stainless steel, P 210 mm.. . . . . . . . . . . . . . . . RIDM07 Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RGDM07
Satin stainless steel, P 250 mm.. . . . . . . . . . . . . . . . RIDM06
Wall-mounted, built-in thermostatic bath/shower mixer tap. Wall-mounted, built-in bath/shower mixer tap.
130 130
100÷125 85÷110
Ø 60
Ø 60
160 160
Ø 25
Ø 50
175
Ø 25
80
50
24 Satin stainless steel, P 200 mm.. . . . . . . . . . . . . . . . RIDM02 Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RIDM08
Satin stainless steel, P 300 mm.. . . . . . . . . . . . . . . . RIDM01
L = Width
P = Depth
H = Height
Pr = Price code
24.20 01/2018
T a p s
MINIMAL (Design Giulio Gianturco - 2002)
Pr Pr
Freestanding floor-mounted spout for washbasin. Freestanding floor-mounted spout for bathtub.
240 240
25
25
870
1170
955 655
Ø 80
Ø 80
33-40
220 - 300
330
40
190
Ø 55
45
90
Ø 55 mm.
RRDM02 RRDM11
325 325
Ø 22 Ø 22
300 110
Ø 55
45
Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RRDM08 Satin stainless steel, with hose. . . . . . . . . . . . . . . . . RRDM02 24
Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RRDM11
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.21
T a p s
MINIMAL (Design Giulio Gianturco - 2002)
Pr Pr
Free standing floor-mounted shower spout. Wall-mounted hand shower.
120 45
180 40
Ø 55
25 40
23 195
2080
1940
Ø 120
24 185 45
7 Ø 25 125
40
10 Ø 55
40
Wall-mounted, built-in 5-way diverter. Built-in deck-mounted tap set for bathtub.
32÷72
260
Ø 25
3
Ø 100
140
151
385
80
L = Width
P = Depth
H = Height
Pr = Price code
24.22 01/2018
T a p s
MINIMAL (Design Giulio Gianturco - 2002)
Pr Pr
Built-in deck-mounted tap set for bathtub. Without spout. Freestanding floor-mounted bathtub tap set.
Ø60
190
Ø 25
3 280 890
315
80
Ø120
• Cold/warm taps with 3/4“ screw disks. • Consisting of: mixer, spout, hand shower and diverter.
• Hand shower with dedicated mixer. • 1/2“ connections.
• Flow rate: 22,0 l/min. • Flow rate: 18,0 l/min.
shut-off valve.
55 60
24
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.23
T a p s
WINGS (Design Mario Tessarollo - 2009)
Pr Pr
Wall-mounted, built-in tap set for washbasin / bidet. Spout for washbasin, for wall-mounted tap set.
150 - 220
210
60
Ø 21
75
24
• Spout to be ordered separately. Compatible ONLY with RINS01-02-03-04-05- • Flow rate: 8,4 l/min.
06-07-08. • Compatible ONLY with RHNS01-02.
• Please add the recessed wall container for tap.
• In case of use on Pianura back-splash, please add the plate cod. RRNS04 (the
recessed container is not necessary).
POLISHED STAINLESS STEEL: UNTIL STOCK LASTS POLISHED STAINLESS STEEL: UNTIL STOCK LASTS
Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RHNS01 Satin stainless steel, P 150 mm.. . . . . . . . . . . . . . . . RINS01
Polished stainless steel.. . . . . . . . . . . . . . . . . . . . . . RHNS02 Polished stainless steel, P 150 mm.. . . . . . . . . . . . . RINS02
Satin stainless steel, P 220 mm.. . . . . . . . . . . . . . . . RINS03
Polished stainless steel, P 220 mm.. . . . . . . . . . . . . RINS04
Spout for bidet, for wall-mounted tap set. Wall-mounted, built-in tap set for washbasin / bidet / shower.
150 - 220
150
60
Ø 21
75
24
• Flow rate: 8,4 l/min. • Compatible with all top- or wall-mounted spouts, except for RINS01-2-3-4-5-6.
• Compatible ONLY with RHNS01-02. • Please add the recessed wall container for tap.
POLISHED STAINLESS STEEL: UNTIL STOCK LASTS POLISHED STAINLESS STEEL: UNTIL STOCK LASTS
Satin stainless steel, P 150 mm.. . . . . . . . . . . . . . . . RINS05 Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RHNS03
Polished stainless steel, P 150 mm.. . . . . . . . . . . . . RINS06 Polished stainless steel.. . . . . . . . . . . . . . . . . . . . . . RHNS04
Satin stainless steel, P 220 mm.. . . . . . . . . . . . . . . . RINS07
Polished stainless steel, P 220 mm.. . . . . . . . . . . . . RINS08
190
150
24
110
Ø 21
75
150
220 50
• Compatible with all top- or wall-mounted spouts, except for RINS01-2-3-4-5-6. • Flow rate: 8,4 l/min.
• Drainage box included.
• Flow rate: 12,0 l/min.
• Without spout.
POLISHED STAINLESS STEEL: UNTIL STOCK LASTS POLISHED STAINLESS STEEL: UNTIL STOCK LASTS
24 Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RHNS05 Satin stainless steel, H 150 mm. . . . . . . . . . . . . . . . RINS09
Polished stainless steel.. . . . . . . . . . . . . . . . . . . . . . RHNS06 Polished stainless steel, H 150 mm.. . . . . . . . . . . . . RINS10
Satin stainless steel, H 220 mm.. . . . . . . . . . . . . . . . RINS11
Polished stainless steel, H 220 mm.. . . . . . . . . . . . . RINS12
L = Width
P = Depth
H = Height
Pr = Price code
24.24 01/2018
T a p s
WINGS (Design Mario Tessarollo - 2009)
Pr Pr
Spout for bidet. Freestanding floor-mounted spout for washbasin.
130 250
Ø 21
75
50
40 Ø 21
1130
1250
Ø 90
• Flow rate: 8,4 l/min. • Flow rate: RINS15-16 8,4 l/min - RINS17-18 26 l/min.
POLISHED STAINLESS STEEL: UNTIL STOCK LASTS POLISHED STAINLESS STEEL: UNTIL STOCK LASTS
Freestanding floor-mounted spout for bathtub. Wall-mounted, built-in tap set for bathtub.
200
210
Ø 27
700
810
75
24
Ø 90
POLISHED STAINLESS STEEL: UNTIL STOCK LASTS POLISHED STAINLESS STEEL: UNTIL STOCK LASTS
Wall-mounted, built-in tap set for bathtub. Wall-mounted, built-in tap set for shower.
160 160
385 385
Ø 24 Ø 24
30 30
75 75
L. 1500 L. 1500
POLISHED STAINLESS STEEL: UNTIL STOCK LASTS POLISHED STAINLESS STEEL: UNTIL STOCK LASTS
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.25
T a p s
WINGS (Design Mario Tessarollo - 2009)
Pr Pr
Spout for bathtub, for wall-mounted tap set. Wall-mounted, built-in tap set for bathtub / shower.
150 - 220
160
Ø 27
75
228
Ø 24
30
75
L. 1500
• Compatible ONLY with RHNS07-08-15-16. • Please add the recessed wall container for tap.
• Flow rate: please see RHNS07-08-15-16. • Flow rate: 14,0 l/min.
POLISHED STAINLESS STEEL: UNTIL STOCK LASTS POLISHED STAINLESS STEEL: UNTIL STOCK LASTS
Satin stainless steel, P 150 mm.. . . . . . . . . . . . . . . . RINS19 Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RHNS09
Polished stainless steel, P 150 mm.. . . . . . . . . . . . . RINS20 Polished stainless steel.. . . . . . . . . . . . . . . . . . . . . . RHNS10
Satin stainless steel, P 220 mm.. . . . . . . . . . . . . . . . RINS21
Polished stainless steel, P 220 mm.. . . . . . . . . . . . . RINS22
Built-in deck-mounted tap set for bathtub. Built-in deck-mounted tap set for bathtub. Without spout.
190
185
185 24
300
355
24
75
75
POLISHED STAINLESS STEEL: UNTIL STOCK LASTS POLISHED STAINLESS STEEL: UNTIL STOCK LASTS
135
250
115
100
450 230
L = Width
P = Depth
H = Height
Pr = Price code
24.26 01/2018
T a p s
WINGS (Design Mario Tessarollo - 2009)
Pr Pr
Ceiling-fixed shower head. Wall-mounted, recessed container for tap.
65
230
100
100
230 230
Wall-mounted, recessed container for tap. Wall-mounted, recessed container for tap.
65
65
195
373
100
100
246
45
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.27
T a p s
LIQUID (Design Piero Lissoni - 2002)
Pr Pr
3-holes tap set for washbasin. 3-holes tap set for bidet.
160 160
153
183/293
100
100 100
50
100
50
120
176
58
Ø46 83
120 180
176
344
Ø46 83
251
Ø46
L = Width
P = Depth
H = Height
Pr = Price code
24.28 01/2018
T a p s
LIQUID (Design Piero Lissoni - 2002)
Pr Pr
Freestanding floor-mounted mixer tap for washbasin. Freestanding floor-mounted spout.
210 257
1043 26
1110 - 764
Ø 38
1037 - 692
951
Ø 120
99
• 1/2“ connection.
113 160
62
60 293/373
217/297
Wall-mounted, built-in bath/shower mixer tap. Wall-mounted, built-in bath/shower mixer tap.
100 100
150 190
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.29
T a p s
LIQUID (Design Piero Lissoni - 2002)
Pr Pr
Wall-mounted spout for bathtub/washbasin. Hand shower.
24
155 - 225
Ø 50
Ø 50
54
Wall-mounted, built-in washbasin mixer tap. Wall-mounted, built-in thermostatic bath/shower mixer tap.
180
130
100
10
208÷220
300
100 298
90
Ø 200
10
157
• Arm included. 1/2“ connection. • Consisting of: mixer, spout, hand shower and diverter.
• Anti-limestone membrane in silicone. • Progressive ceramic cartridge.
L = Width
P = Depth
H = Height
Pr = Price code
24.30 01/2018
T a p s
LIQUID (Design Piero Lissoni - 2002)
Pr Pr
Built-in deck-mounted tap set for bathtub. Without spout. Built-in deck-mounted tap set for bathtub.
165
10
180
10
315
80 385
80
• Cold/warm taps with 3/4“ screw disks. • Cold/warm taps with 3/4“ screw disks.
• Hand shower with dedicated mixer. • Spout.
• Hand shower with dedicated mixer.
Wall-mounted, built-in 3-way diverter. Wall-mounted, built-in mixer tap for washbasin/bathtub/shower.
58
Ø 99
78 112,5
• 1/2“ connections.
• Round washer.
820
670
Ø 50
Ø 120
Chromium-plated.. . . . . . . . . . . . . . . . . . . . . . . . . . . RESL17 24
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.31
T a p s
W1 (Design Norbert Wangen - 2006)
Pr Pr
Top-mounted tall tap set for washbasin. Top-mounted tap set for washbasin.
230 230
160
300
Ø 35
Ø 54
Ø 54
173
35
132 Ø 44
18
29
160
Ø 18
Ø 54
• Flow rate: 8,4 l/min. • 1/2“ ceramic screw disks, 90° opening.
• Compatible with all top- or wall-mounted spouts.
• Flow rate: 12,0 l/min.
Wall-mounted, built-in tap set for washbasin. Wall-mounted, built-in tap set.
225 160
183 28
28
43
Ø 44
Ø 44 80
18 90°
80
200
• 1/2“ ceramic screw disks, 90° opening. • 3/4“ ceramic screw disks, 90° opening.
• Swivelling spout. • Washbasin / bathtub use: compatible with all top or wall-mounted spouts.
• Flow rate: 8,4 l/min. • Shower use: compatible with all wall-mounted shower heads or hand-showers.
• Flow rate: 22,0 l/min.
L = Width
P = Depth
H = Height
Pr = Price code
24.32 01/2018
T a p s
W1 (Design Norbert Wangen - 2006)
Pr Pr
Top-mounted spout. Freestanding floor-mounted spout.
18 18
230
230
Ø 55 Ø 80
Satin stainless steel, H 160 mm. For washbasin. . . . RIFA02 Satin stainless steel, H 1100. For washbasin. . . . . . RIFA03
Satin stainless steel, H 300 mm. For washbasin.. . . RIFA01 Satin stainless steel, H 700. For bathtub.. . . . . . . . . RIFA04
Satin stainless steel. For bidet.. . . . . . . . . . . . . . . . . RIFA05
Wall-mounted, built-in thermostatic tap set. Built-in deck-mounted tap set for bathtub. Without spout.
80
28 188
200
Ø 44
315
80
Built-in deck-mounted tap set for bathtub. Wall-mounted, built-in tap set for bathtub.
Ø24
335
95
278
188
57
18 200
180
18
33
385
145
80
• Cold/warm taps with 3/4“ screw disks. • Cold/warm taps with 3/4“ screw disks.
• Spout. • Spout.
• Hand shower with dedicated mixer. • Hand shower with dedicated mixer.
• Flow rate: 22,0 l/min. • Flow rate: 22,0 l/min.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.33
T a p s
W1 (Design Norbert Wangen - 2006)
Pr
Wall-mounted, built-in 5-way diverter.
80
80
28
• 1/2“ connections.
24
L = Width
P = Depth
H = Height
Pr = Price code
24.34 01/2018
T a p s
CUT (Design Mario Tessarollo and Tiberio Cerato - 2002)
Pr Pr
Wall-mounted, built-in washbasin mixer tap. Wall-mounted, built-in mixer for bidet.
400 400
150/250 175/245
45 45
Satin stainless steel, spout P 150 mm.. . . . . . . . . . . RECT01 Satin stainless steel, spout P 175 mm.. . . . . . . . . . . RECT03
Satin stainless steel, spout P 250 mm.. . . . . . . . . . . RECT02 Satin stainless steel, spout P 245 mm.. . . . . . . . . . . RECT04
Deck-mounted, built-in bathtub tap set. Deck-mounted, built-in bathtub tap set. Without spout.
400
600
45
45
• Consisting of: mixer, spout, hand shower and diverter. • Consisting of: mixer, hand shower and diverter.
• Flow rate: 16,0 l/min. • Flow rate: 16,0 l/min.
• Progressive ceramic cartridge. • Progressive ceramic cartridge.
Wall-mounted, built-in tap set for bathtub. Freestanding floor-mounted bathtub tap set.
45
600
265
950
215
250 55
• Consisting of: mixer, spout, hand shower and diverter. • Consisting of: mixer, spout, hand shower and diverter.
• Please add the recessed wall container for tap. • Flow rate: 16,0 l/min.
• Flow rate: 16,0 l/min. • Progressive ceramic cartridge.
• Progressive ceramic cartridge.
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.35
T a p s
CUT (Design Mario Tessarollo and Tiberio Cerato - 2002)
Pr Pr
Wall-mounted, built-in mixer tap for shower. Wall-mounted, built-in tap set for shower.
800 1600
45 45
• Please add the recessed wall container for tap. • Consisting of: mixer, spout, hand shower and diverter.
• Flow rate: 16,0 l/min. • Please add the recessed wall container for tap.
• Progressive ceramic cartridge. • Flow rate: 16,0 l/min.
• Progressive ceramic cartridge.
Shut-off valve for cold and hot water. Wall-mounted, recessed container for tap.
70 74
45
390/590
90 120
38
790
1595
37
38
L = Width
P = Depth
H = Height
Pr = Price code
24.36 01/2018
T a p s
UNIVERSAL ITEMS
Pr Pr
WC flush plate. WC flush plate.
• With flush-mounted controls. • Compatible with GEBERIT flush plates, mod. Sigma, double controls and with
• Compatible with GEBERIT flush plates, mod. Sigma, double controls and with GEBERIT UP320, UP720.
GEBERIT UP320, UP720. • Without visible fastening elements.
• Without visible fastening elements.
Shower riser rail. Spout for washbasin, wall-mounted or mounted on Pianura back-splash.
75 150 - 220
Ø 50
60
Ø 21
900
• Shower riser rail with shower head holder. • AISI 304 stainless steel / chromium-plated brass / PVD grey.
• Accessories in AISI 304 stainless steel - Finishes: satin / polished / grey PVD. • Compatible with REDM08, RESL10, RHNS05-06, REFP01.
• Flow rate: 8,6 l/min.
Satin stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . RRZZ01 Satin stainless steel, P 150 mm.. . . . . . . . . . . . . . . . RINS23
Polished stainless steel.. . . . . . . . . . . . . . . . . . . . . . RRZZ02 Polished stainless steel, P 150 mm.. . . . . . . . . . . . . RINS24
Grey PVD.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RRRX02 Chromium-plated, P 150 mm.. . . . . . . . . . . . . . . . . . RINS27
Grey PVD, P 150 mm.. . . . . . . . . . . . . . . . . . . . . . . . RINS29
Satin stainless steel, P 220 mm.. . . . . . . . . . . . . . . . RINS25
Polished stainless steel, P 220 mm.. . . . . . . . . . . . . RINS26
Chromium-plated, P 220 mm. . . . . . . . . . . . . . . . . . RINS28
Set of 3 extensions for hoses connection. Grey PVD, P 220 mm. .. . . . . . . . . . . . . . . . . . . . . . . RINS30
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 24.37
P l u m b i n g a c c e s s o r i e s
WASHBASINS - COMPLETE DRAINAGE KIT
Pr Pr
1 - UP&DOWN kit for washbasins with overflow. 2 - UP&DOWN kit for washbasins with overflow.
+ + +
• Made up of chromium-plated siphon code ANBM002 + chromium-plated waste • Made up of stainless steel siphon code ANBM006 + stainless steel waste drain
drain code ANBN001. code ANHG001 + stainless steel plug code ANDR002.
3 - free-flow waste kit for washbasins without overflow. 4 - free-flow waste kit for washbasins without overflow.
+ + +
• Made up of chromium-plated siphon code ANBM002 + chromium-plated waste • Made up of stainless steel siphon code ANBM006 + stainless steel waste drain
drain code ANBN002. code ANHG001+ stainless steel plug code ANDR004.
5 - free-flow waste kit for washbasins without overflow. 6 - free-flow waste kit for washbasins without overflow.
+ + + +
• Made up of chromium-plated siphon code ANBM002 + white waste drain code • Made up of stainless steel siphon code ANBM006 + white waste drain code
ANHG002 + white Cristaplant® plug code ANDR010. ANHG002 + white Cristaplant® plug code ANDR010.
25
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 25.3
P l u m b i n g a c c e s s o r i e s
WASHBASINS - COMPLETE DRAINAGE KIT
Pr Pr
7 - free-flow waste kit for washbasins without overflow. 8 - free-flow waste kit for washbasins without overflow.
+ + + +
• Made up of chromium-plated siphon code ANBM002 + white waste drain code • Made up of stainless steel siphon code ANBM006 + white waste drain code
ANHG002 + white Corian® plug code ANDR011. ANHG002 + white Corian® plug code ANDR011.
900 x min 1001 mm, max 1200 mm 10 - Bottle waste kit for washbasins with overflow.
+ + +
• Made up of chromium-plated siphon code ANBM010 + chromium-plated waste • Made up of chromium-plated siphon code ANBM010 + stainless steel waste
drain code ANBN001. drain code ANHG001 + stainless steel plug code ANDR002.
25
L = Width
P = Depth
H = Height
Pr = Price code
25.4 01/2018
P l u m b i n g a c c e s s o r i e s
WASHBASINS / BIDET
Pr Pr
Waste drain for washbasin/bidet with UP&DOWN plug. Waste drain for washbasin/bidet without plug.
Ø 64 Ø 64
40-64
40-64
Ø 62
Ø 62
45
45
G 1"1/4 G 1"1/4
• For washbasins and bidet with overflow. • For all washbasins in Cristalplant® or Corian®.
• Versions: stainless steel / white ABS.
Washbasin free-flow waste drain with plug. UP&DOWN plug for waste drain.
Ø 72 Ø 64
3-25
Ø 62
45
G 1"1/4
• Versions: chromium-plated (spare part for waste drain code ANBN001) / stain-
less steel (for waste drain code ANHG001).
Plug, for free-flow waste trap. Plug in Cristalplant®, for free-flow waste drain.
Ø 72 Ø 64
• Versions: chromium-plated (spare part for waste drain code ANBN002) / stain- • For washbasins without overflow in Cristalplant®.
less steel (for waste drain code ANHG001). • Compatible with waste drains cod. ANHG002 white / ANHG001 stainless steel
/ ANBN002 chromium-plated.
25
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 25.5
P l u m b i n g a c c e s s o r i e s
WASHBASINS / BIDET
Pr Pr
Plug in Corian®, for free-flow waste drain. UP&DOWN plug in Cristalplant® for waste drain.
Ø 64 Ø 64
• For washbasins without overflow in Corian®. • For washbasins in Cristalplant® with overflow.
• Compatible with waste drains cod. ANHG002 white / ANHG001 stainless steel • Compatible with waste drains cod. ANHG002 white / ANHG001 stainless steel
/ ANBN002 chromium-plated. / ANBN001 chromium-plated.
Plug in Ceramilux®, for free-flow waste drain. Cover for drilled tap hole.
Ø 64 Ø 45
50
G 1"1/4
90 - 285 Ø 32 225
Ø 90
Ø 32
Ø
Ø
40
74 - 204
40
89
Ø 56
25
L = Width
P = Depth
H = Height
Pr = Price code
25.6 01/2018
P l u m b i n g a c c e s s o r i e s
WASHBASINS / BIDET
Pr Pr
Bottle siphon for washbasin. Cylindrical siphon for washbasin.
G 1"1/4
360
Ø 72
Ø
32
65 - 170
92
Ø 50
• Chromium-plated ABS + rubber. • Versions: chromium-plated brass, brass stainless steel finish, grey brass (colour
• Flexible rubber tube, wall-mounted. that can be matched with grey PVD).
Extended tube for cylindrical siphon for washbasin. Cylindrical siphon for washbasin.
100 - 380
1" 1/4
100 - 380
Ø3
2 400 7 - 90
Ø
32
Ø 32
100
Ø 2
Ø
80
3
Ø 62
50 min.
• To be used in place of the 360 mm. standard tube. • Versions: chromium-plated brass or brass stainless steel finish.
• For cylindrical siphon code ANBM006.
• Version: brass stainless steel finish.
100 - 380
1" 1/4
7 - 90
Ø
32
Ø 32
100
Ø 62 100 - 816
Ø 80
Chromium-plated. . . . . . . . . . . . . . . . . . . . . . . . . . . ANBM007
Stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ANBM008
25
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 25.7
P l u m b i n g a c c e s s o r i e s
BATHTUBS
Pr Pr
Plug for bathtub waste drain. Plug in Cristalplant®, for bathtub waste drain.
Ø 72 Ø 72
• Compatible with all Boffi bathtubs, BASIC excluded. • Compatible with all Boffi bathtubs in Cristalplant® or Ceramilux® white matt,
BASIC excluded.
Waste drain for bathtub with automatic integrated overflow and siphon.
Ø 70
min 610
max 1060
61
70
Ø 40
160
Chromium-plated. . . . . . . . . . . . . . . . . . . . . . . . . . . ANBN011
Stainless steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ANBN012
Grey PVD. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ANBN013
25
L = Width
P = Depth
H = Height
Pr = Price code
25.8 01/2018
P l u m b i n g a c c e s s o r i e s
SHOWERS
Pr
free-flow waste trap for shower tray.
124
0-25
73,25
48
77,25
51
Ø 40
82 50
• Plug included.
• For Ø 90 mm hole.
• Arranged for drainage.
• Compatible with D10 / TAPE shower trays.
Chromium-plated. . . . . . . . . . . . . . . . . . . . . . . . . . . ANBN003
25
L = Width
P = Depth
H = Height
Pr = Price code
01/2018 25.9
Boffi Spa
Via Oberdan 70
20823 Lentate sul Seveso [MB] - Italy
Tel. +39.0362.5341 - Fax +39.0362.565077
ERIÀPDUNHW#ERIÀFRPZZZERIÀFRP