Professional Documents
Culture Documents
Datasheet of Al Form Oil C
Datasheet of Al Form Oil C
ESTIMATION
An ISO 9001-2008 CERTIFIED
N NA AZ
enterprises
An ISO 9001-2008 CERTIFIED
supply
AL FORM 200 LITRE DRUMS AND IN BULK
area coverage
AL FORM 22-55 m2/ litre
storage
•Al form has a minimum shelf life of 12 months when
stored in the original unopened containers under
™
normal warehouse conditions
AL-FORM
ADDITIONAL INFORMATION
For any other additional information kindly contact
Naaz enterprises office as below
Naaz Enterprises
D/302, Dosti Avenue, Dsouza Nagar, Dosti Complex,
90 Feet Road, Sakinaka, Andheri (East ), Mumbai 400 072
Email: naaz.enterprisez@gmail.com
N N
uses description
For quick , clean and easy stripping of Moulds and Formwork Al Form Mould release agent is a Oil with Perfect Viscosity And pale
Yellow Coloured Liquid.
For high Quality , Fair faced and Stain free concrete
efficiency of the production. The good about Al form is it just have to be coated once irrespective of
the types of mould whether old or new or absorbing material .
Reduces opportunity of Damage to Formwork , Extending Usable Life.
Minimizes Surface Staining. Al form non absorbing property Reduces the quantity of Al form
required.
Promoting High Quality Fair Faced Concrete even with the
Al form can even be washed with water after applying on Mould and
White Cement. before concreting the mould . Its water proofing quality makes it the
perfect material for Formwork purpose.
Inhibits the corrosion of Steel Formwork.
Suitable for the Use of all types of Formwork. Easier Release and Reduced residue minimizes the chance of
damage to the mould during the cleaning and stripping.
Extending usable life of the formwork.
Protect the moulds defect and hence frequency of concrete defects is
almost eliminated.
N N
support by our team application
Al form can be applied by all normal methods, including brush,
Naaz Enterprises offers a support service to Specifiers, End user and Contractors.
sponge and other traditional means.
On site assistance by our Team.
The good about Al form is it just have to be coated once irrespective of
the types of mould whether old or new or absorbing material
properties
Specific GravityTypically 0.88 at 25C
coverage rate
Kinematic Viscosity 90 CST at 40C
Depending upon the porosity and the texture of the mould surface
Flash Point Above 240C Typical coverage rate of 22m2 to 55m2 per liter can be obtained.
Al form can be used on Timber, Steel, GRP and other Resinous The best Result is obtained with the thinnest Practical coating.