Wale-e Crochet Pattern
Zo ci tes ene
Where to find supplies:
me hs ET ieBody panels: (make six of these)
“Rows: gold yarn
1. Ch8 (8)
2-9. 1 sc (8)
*Cut six squares from the stiff felt (it doesn’t matter
what color). The squares need to be slightly smaller
than the body panels. You will need to hot glue one
square to each of the panels. See photos. Once you've
done this, you can now stitch the panels together to
form the body. Before you close the final stitches up,
make sure to stuff the body firmly with potyfil
Computer panels:
“Rows; brown yam
Larger piece:
1. Ch 949)
2-4. 1 sc (9)
*Use hot glue to attach this piece to the front body
panel.
‘Smaiier piece:
1. Ch4 (4)
2-4. 1 sc (4)
*Use hot glue to attach this piece to the center of the
larger computer panel. Cut a small piece of the stift
black felt and hot glue to the right side of the small
‘computer panel. You can paint the green lines on now,
or later after you've fnished all of the crochet parts.
Rim:
*Rows; brown yam
1. Ch 34 (34)
2. 1 8c (34)
“Hot glue around the entire edge of the top body panel.
‘See photos.
Neck:
“Rounds; gold yarn
1. Create a ring with 3 sc (3)
2-11. 1 80 (3)
“Cut a piece of the jewelry wire so that itis slightly
longer than the neck piece. Insert into neck piece, then
stitch onto top body panel and fold in haif. See photos.
Neck bolt
“Rounds; gold ya’
1 Create a ring with 3 sc (3)
“Make two of these: use hot glue to
attach to middle of neck, one on each
side.
Arms:
*Rounds; gold yam
First piece: (shoulder)
1. Create a ring with 3 sc (3)
2. 180 (3)
“Make two of these. Hot glue one to
each side panel.
Second piece: (arm)
1. Create a ring with § sc (5)
2-7. 1 80 (5)
“Hot glue to first arm piece. One on each
side.
Third piece: (wrist)
1. Create a ring with 3 sc (3)
2. 18¢(3)
“Hot glue to second arm piece. One on
each side. See photos.Wheels,
“Rows; brown yam
1.Ch 24 (24)
2-4. 1 sc (24)
“Cut three rectangle pieces of the stiff brown felt
for each wheel; six pieces total. Use hot give :0
attach. You should now be able to fold the wheel
into a triangle shape, then stitch ends together
‘and hot glue to body.
Wheel gears:
*Rounds; brown yarn
Large gear:
1. Create a ring with 6 sc (6)
*Make one for each wheel, total of two. Use hot
glue to attach to inside of wheel toward the front,
bottom comer.
Small gear:
1. Create a ring with 3 sc (3)
*Make two for each wheel, total of four. Use hot
Qlue to attach to inside of wheel in the remainng
comers,
Bottom corner edges:
“Rows; brown yam
1. Ch 5 (5)
2.18¢(5)
*Make four of these. Hot glue one to each
bottom comer of the body panel. There will be
two in the front of his body and two in the back.
Eyes
*Cut the eye shape out from the felt (page 8),
four from the stiff black felt and two pieces from
the dark gray felt. Glue each of the gray pieces
to two of the stiff black pieces. You should now
have four pieces total; the glued paires and the
other two stiff black pieces.
“Rows; brown yam
1. Ch 16 (16)
2-4. 1 sc (16)
“Make two of these. Use hot glue to attach the
felt eye pieces. You will have to stretch the yarn
to make sure it fits all the way around, then sttch
the ends together where they meet at the top,
inside part of the eye. The black pieces will be
the back of the eye and the gray pieces will be
the front of the eye. See photos.
Back of eye:
“Rounds; brown yarn
1. Create a ring with 8 sc (8)
2-6. 1 sc (8)
7. Dec three times (5)
“Make two of these; one for each eye. Fill with
‘small amount of polyfil, then hot glue to back of
‘eyes. See photos.
1. Create a ring with 4 sc (4)
2-6. 1 sc (4)
7. Dac one time (3)
“Hot glue to top part of neck, then glue one eye
to each side. Make sure to use enough give or
else it will be wobbly. See photos.
Wires:
*Rows; brown yarn
1.Cn8 (8)
*Make two of these; Stitch or use hot glue to
attach to back of head. See photos.
Hands:
*Rows; brown yarn
Fingers:
1.Ch 8 (8)
2-3. 1 sc (8)
*Make two of these for each hand, total of four.
Cut two rectangle pieces from the stiff brown felt
for each finger, then hot glue. See photos.
Finger center:
1.Cn2(2)
2. 180 (2)
*Make two of these, one for each hand. Hot glue
in between each finger. See photos.
Thumb:
1.Ch4 (4)
2:3.1 sc (4)
*Make two of these, one for each hand. Hot glue
to inside of hand. See photos. Once you have
completed this step, your hand is finished and is
now ready to be glued to the arm. Make sure to
use enough glue, so that it isn’t wobbly.“Rim
*Body panels; | used stiff white
felt, but you can use any color.
These will not be seen as they
will be on the inside of the body,
and will help it hold a box shape.“Wires
*Back of eye“Fingers
|
“Finger center “Thumb
SS;
Shave off some of the rust colored chalk, then use a paintbrush to brush it all over the golo
of his body. Use a reference photo 'f you need to for what areas have mor
spray to seal it. 3