Professional Documents
Culture Documents
Bingham Blasting Accessories Catalog
Bingham Blasting Accessories Catalog
Bingham Blasting Accessories Catalog
Bingham Industries understands these changes and is here to serve the needs of you, the user. We are
a small company, so no one understands the needs of small and mid-size businesses better. We have never
and will never take a big business approach to dealing with you. Personal attention, commitment to service
and quality, as well as our tremendous pricing is what sets us apart.
In this new 2008 parts catalog, you will see that we have continued to expand our product line. Our
development of several of these lines should mark a change in the 40K industry. Our universal gun kit is a
product we are very excited about. It will allow any UHP gun user to convert their guns to our industry-
leading Wolf water blast gun. The Wolf’s performance and reliability are well documented, and now your
fleet of guns can be converted to Wolf high performance parts in less than an hour.
We have also released a new dump-style tumble box that drastically improves on the shortcomings of
other boxes. Our box is lighter, easier to work on, features significant safety upgrades and lasts much longer
in the field in between rebuild cycles. There are no expensive cartridges to replace and poppet and valve seat
life has been greatly increased
These are just a few of the changes we have made to our product line, which we are excited to share
with your company. The benefit for you, the customer is tremendous as we switch from an OEM supplier to
a more mainstream, end user approach. Our 15,000 Sq. Ft. state-of-the-art facility will continue to produce
the highest quality components at great prices. Our top notch, free of charge technical support will continue
to be available, no matter how large or small your company.
We look forward to working with you this coming year and would like you to know that you and
your company have our fullest support in whatever we can do to help make your more profitable.
Regards,
Jeremy Bingham
]xÜxÅç eA U|Çz{tÅ
President / Bingham Industries
NOZZLES PAGES 1-3
Page 1
NOZZLES
Low-Mass® Nozzle
3/8-24 Thread size — 3/8 Allen Head Retaining Screw (208321)
BMI # 2806 Series
Available in: Orifice sizes .002 to .044
Available with: Standard angle seat
Working Pressure: 0-60,000 PSI
This item may be a suitable replacement for:
A.M. Gatti 3106 Series
H2O Jet 202801 Series
AMC Jet® Waterjet Type 20
BB-25 Nozzle
3/8-24 Thread size — 3/8 Allen Head Retaining Screw (280322)
BMI # 2807 Series
Available in: Orifice sizes .002 to .044
Also Called: Viper, Mushroom Tip, Metering Orifice, Long
Stem Low-mass
Working Pressure: 0-60,000 PSI
This item may be a suitable replacement for:
A.M. Gatti 2720 (60°) & 2908 (48°) Series
NLB Corp BN3539 Series
H2O Jet 201401 Series
Gardner Denver 408191 Series
AMC Jet Waterjet Type 10
Type D-Nozzle
M4 X .5 Thread — 2mm Allen Hex Head
BMI # 2805 Series
Available in: orifice sizes .004 to .044
Also Called: Jewel Screws, Tube Inserts
Working Pressure: 0-55,000 PSI
This item may be a suitable replacement for:
A.M. Gatti 2872 & 3121 Series
Gardner Denver 408110 Series
Page 2
NOZZLES
Raw Sapphires
BMI # 2800-xx (Orifice Size)
Standard replacement for: All sapphires
Working Pressure: 0-60,000 PSI
Retaining Screws
BMI # 280321 (Low-mass) & 280322 ( BB-25)
Works with: BB-25 & Low-mass in 3/8-24 mounts
Nozzle Extender
Type D Screwdriver Nozzle Extender Wear Cap BMI# 401811
BMI# 280300 BMI# 401820 Works with: all 3/8 Nozzle Bodies
Work with: All Type D Hex head nozzles Works with: All 9/16-18 Threads External Threads: 9/16-18
Used for: Installing jewels; cleanly in- Female Threads: 9/16-18 Internal Threads: 3/8-24
stalling or removing Type D nozzle bodies Can be used to replace: Can be used to replace:
from tips. AM Gatti 3281 AM Gatti 3270
Page 3
NOZZLE CARRIERS
3 Jet Nozzle Carrier with Recessed Ports — Balanced Pattern
9/16 FBUT inlet — 3/8-24 Nozzle insert size (2808 Series)
BMI # 401496
Length: 4.00 Inches
Width: 2.00 Inches
Also Called: Nozzle Heads, Nozzle Manifolds, Spray Heads,
Nozzle Holder
Working Pressure: 0-55,000 PSI
This item may be a suitable replacement for:
A.M. Gatti 3282 & 3308 Series
NLB Corp BN-10096-1
Page 4
NOZZLE CARRIERS
5 Jet Nozzle Carrier — Flow-Style
9/16 FBUT inlet — 3/8-24 Nozzle insert size (2808 Series)
BMI # 401501
Length: 4.00 Inches
Width: 2.00 Inches
Also Called: Nozzle Heads, Nozzle Manifolds, Spray Heads,
Nozzle Holder, Flow style head
Working Pressure: 0-55,000 PSI
This item may be a suitable replacement for:
NLB Corp DN-12560
Flow Intl 009290-5
Page 5
CLEANING TIPS
1/4 Cleaning Tips
1/4-20 FAC Inlet — Type D Nozzle Inserts (2805 series)
Length: 1.8125 Inches
Outer Diameter: 0.375 Inches
Also Called: Lance Tips, Insert heads, tube cleaners, tube tips,
bundle cleaners
Working Pressure: 0-45,000 PSI
Page 6
CLEANING TIPS
3/8 Cleaning Tips (continued)
3/8-24 FAC Thread — Type D Nozzle Inserts (2805 series)
Length: 1.8125 Inches
Outer Diameter: 0.490 Inches
Also Called: Lance Tips, Insert heads, tube cleaners, tube
tips, bundle cleaners
Working Pressure: 0-45,000 PSI
Page 7
CLEANING TIPS
7/16 Cleaning Tips (Large OD)
7/16-20 MBE Thread — Type D Nozzle Inserts (2805 series)
Length: 1.50 Inches
Outer Diameter: 0.650 Inches
Also Called: Lance Tips, Insert heads, tube cleaners, tube tips,
bundle cleaners
Working Pressure: 0-45,000 PSI
401345
BMI# Type Jets Angle
401322 Tube 4 30° 401322 has the sides cut down to .550 for
optimal clearance inside tubes
401345 Tube 4 2 @ 30°
2 @ 150°
401345 is also known as a “Tube Raper”
401348 Tube 2 30°
Page 8
CLEANING TIPS
9/16 Clean Tips (Small OD) (Continued)
9/16-18 FBUT Thread — Type D Nozzle Inserts (2805 series)
Length: 2.50 Inches
Outer Diameter: From 0.656 to 0.875 OD
Also Called: Lance Tips, Insert heads, tube cleaners, tube tips,
bundle cleaners
Working Pressure: 0-45,000 PSI
Page 9
SPECIALTY TIPS
In addition to our large selection of standard tube and surface cleaning tips, we also carry a very large selection
of specialty tips and couplings. These tips have a wide variety of applications. If you don’t see exactly what
you need, please call us regarding your specific project and we’ll be happy to custom build for you.
401214 3/8-24 FAC 0.625 2.00 Tube 4 30° Features a cone on the
face of the nozzle
401237 3/8-24 FAC 0.560 2.50 Tube 2 1 @ 10° Has a beveled face for
1 @ 90° easier debris removal
401479 9/16-18 FBUT 1.00 3.00 Tube 4 3 @ 30° Snake Tip (Must be
1 @ 5° started in the tube)
Page 10
CONNECTORS
Thread 1 Thread 2
BMI # Fitting Size Seat Thread Size Seat Thread Notes
Type
402401 Straight 9/16-18 FBUT RH 9/16-18 FBUT RH Slim-Line
402402 Straight 9/16-18 FBUT RH 9/16-18 FBUT LH Slim-Line
402403 Straight 9/16-18 FBUT LH 9/16-18 FBUT LH Slim-Line
402406 Straight 9/16-18 FBUT RH 3/8-24 FAC RH Slim-Line
402410 Straight 9/16-18 FAC RH 9/16-18 FAC RH Slim-Line
402411 Straight 9/16-18 FAC RH 9/16-18 FAC LH Slim-Line
402412 Straight 9/16-18 FAC LH 9/16-18 FAC LH Slim-Line
402415 Straight 9/16-18 FAC RH 3/8-24 FAC RH Slim-Line
402301 Straight 3/8-24 FAC RH 3/8-24 FAC RH Slim-Line
402302 Straight 3/8-24 FAC RH 3/8-24 FAC LH Slim-Line
402303 Straight 3/8-24 FAC LH 3/8-24 FAC LH Slim-Line
SIDEWINDERS
Part Number Fitting Size Seat Thread Size Seat Thread Jets Angle
Type
Page 11
CONNECTORS
BMI #“Y” BMI # “T” Inlet Outlet
Thread Threads
402550 402570 9/16 9/16
402551 402571 9/16 7/16
402552 402572 9/16 3/8
402555 402575 7/16 7/16
402556 402576 7/16 3/8 402570 9/16 x (2) 9/16
T-Block
402560 402580 3/8 3/8
402561 402581 3/8 1/4
402565 402585 1/4 1/4
4-WAYS PLUGS
BMI # Inlet Sizes BMI # Plug Size
402500 (4) 9/16 402510 9/16 Plug
402552 9/16 x (2) 3/8
402501 (4) 3/8 402511 3/8 Plug Y-Block
402502 (4) 1/4 402513 1/4 Plug
Auto-Clave Style
Page 12
CONNECTORS
Works With: All 3/8 hose connectors up to 60K Works With: All 9/16 hose connectors up to 60K
Works With: All 3/8 hose connectors up to 60K Works With: All 9/16 hose connectors up to 60K
Works With: All 3/8 hose connectors up to 60K Works With: All 9/16 hose connectors up to 60K
Page 13
SPRAY BARS
8 Jet Spray bar (Large Pattern)
3/4-16 Inlet Thread — 3/8-24 Nozzle insert size
BMI # 401700
Length: 9.00 Inches
Width: 3.125 Inches
Height: 1.70 Inches (Without Attenuators installed)
Also Called: Blast Bar, Sprayhead,
Working Pressure: 0-40,000 PSI (50k Model Available)
Plugs: 4 Required, 3/8-24 style
Page 14
WOLF GUN
Page 15
WOLF GUN
From the air motor forward, the Wolf water-blast gun has a number of
innovative features that add to the performance and value of this tool.
• Our mounting plate design allows for quick maintenance work of the
drive belt and pulleys for less down time in the field.
• Our second trigger design is one of the lightest available today and is
mounted on the front of the gun for added safety during blasting. With
a second trigger system, both triggers must be pulled to turn the gun
on. One unique aspect of our 2nd trigger is that it will not stick in
place during operation due to its design. (All guns shipped with trig-
ger guards and burst shield)
• Our balanced 3, 4 , or 5 Jet head designs make sure the lance spins on
center at all times. Unbalanced nozzles are the #1 cause of early shaft
failure.
• Our modular shroud design also allows for quick conversion between
15”, 14” and 36” models. A small retrofit kit is available to lengthen
or shorten the gun in 10 minutes.
• The modular shroud design also allows for easy assembly of custom
length guns. This has allowed us to offer robotic hand tools with 3”
lances, and extra long processing tools with up to 5’ foot lances.
Page 16
WOLF GUN
TECHNICAL SPECIFICATIONS (40,000 PSI)
Description: UHP air driven rotating hand tool for 40K operation
Air Motor: Desoutter DR-750 Air motor. 4100 RPM standard, 6000 RPM available
Air Actuator: Done inside air motor, or in second trigger assembly (optional)
Air Ports: #4 JIC fitting on back of air motor, 2nd trigger. #6 JIC in bottom of air motor
Fluid Inlet: 3/8 inch HP gland and collar fitting comes standard — Fits standard 5MM hose
Compatibility: This gun is compatible with all common liquids, pumps and tumble boxes
Spare parts: This gun requires normal maintenance of swivel seal, brass backup ring and belts.
Swivel shafts do wear out or break, but not as much as users expect.
Page 17
WOLF GUN
TECHNICAL SPECIFICATIONS (50,000 PSI)
Description: UHP air driven rotating hand tool for 50K operation
Air Motor: Desoutter DR-750 Air motor. 4100 RPM standard, 6000 RPM available
Air Actuator: Done inside air motor, or in second trigger assembly (optional)
Air Ports: #4 JIC fitting on back of air motor, 2nd trigger. #6 JIC in bottom of air motor
Fluid Inlet: 3/8 inch HP gland and collar fitting comes standard — Fits standard 5MM hose
Compatibility: This gun is compatible with all common liquids, pumps and tumble boxes
Spare parts: This gun requires normal maintenance of swivel seal, brass backup ring and belts.
Swivel shafts do wear out or break, but not as much as users expect.
Page 18
WOLF GUN SPARES
Page 19
TUMBLE BOX
Page 20
TUMBLE BOX
TECHNICAL SPECIFICATIONS
Dry-Shutoff Tumble Box
Description: Dry-shutoff tumble box
Pressure Ratings: 0-40,000 PSI (2760 Bar)
Flow Capability: Up to 6.5 gallons (22 liters) per minute
Air Actuator: Done inside of pilot valve to actuate UHP water valve
Air Pressure: 90 PSI @ 30 CFM for 40,000 PSI operations
Air Inlet: 1/2 NPT Male (Standard)
Air Ports: #4 JIC for Pilot line. 1/4 NPT x #6 JIC for air motor
Fluid Inlet: 9/16 inch HP gland and collar fitting comes standard
Compatibility: This gun is compatible with all common liquids, pumps and tumble boxes
Weight: Approx. 27 Lbs
Spare parts: With this equipment, we recommend keeping a valve rebuild kit (408101A) and a
spare pilot valve (408717). Other items not considered regular maintenance items.
Page 21
TUMBLE BOX
Air Lubricator— Used to keep
the air tool well oiled. Extends
part life and efficiency of the air Air Regulator— Keeps a constant
tool. Use standard IR air tool oil air flow to the gun, while ensuring
in all boxes. that the air is clean and free of mois-
ture, which extends air motor life
expectancy.
Page 22
TUMBLE BOX
Tumble box Seat
BMI # 408107
Working Pressure: 0-60,000 PSI
Works In: BMI and Flow™ Style Tumbleboxes
Page 23
UNIVERSAL GUN
Upgrading your equipment has never been easier
Our simple 3 step process makes conversion easy and affordable
Step 1:
Disassemble the water blast gun you wish to convert, until the air motor and 2nd trigger are removed
Step 2:
After the air motor and second trigger have been removed, install the swivel / lance pack into the top
mounting plate. Once in place, install the top and bottom mounting plates together over the air motor and
lock firmly into place. Most of the work is now done.
Page 24
UNIVERSAL GUN
Step 3:
Once the lance and swivel are installed, you almost finished. Next, install the 2nd trigger over the shroud.
Bolt the shroud over lance to mounting plate. Screw the lance alignment back onto the end of the shroud.
Make sure all items are securely fastened. You should be finished with the conversion and ready to blast.
Page 25
VULCAN STRIPPER
Vulcan Stripper Style Full Swivel Assembly Vulcan Stripper Style Swivel Assembly
BMI # 405100A BMI # 405102A
Original Number: 77408622-002 Original Number: 77408620
Vulcan Stripper Style Brass Back Vulcan Stripper Style Inlet Adapter
Up Ring with Seal
BMI # 405003A BMI # 405005
Original Number: 77408056 Original Number: 77408039
Swivel Seal Vulcan Stripper Style Swivel Cap Vulcan Stripper Style Swivel Hous-
ing (Steel)
BMI # 405000A BMI # 405115 BMI # 405113
Original Number: 77408054 Original Number: 77408606 Original Number: 77408607-001
Page 26
A-3000
A-3000 Style Brass Back Up Ring A-3000 Style Inlet Adapter A-3000 Style Swivel Housing
with Seal
BMI # 405003A BMI # 405005 BMI # 405201
Original Number: 303270-1 Original Number: 303201-1 Original Number: 006288-1
Swivel Seal A-3000 Style Swivel Cap A-3000 Style End Bushing
BMI # 405000A BMI # 405215 BMI # 408230
Original Number: 303204-1 Original Number: 006289-1 Original Number: 008166-1
Why buy A-
A-3000 Style parts from Bingham Mfg.?
As one of the worlds first UHP blast guns, the A-3000 was developed only a short drive from our facility. Many
of our customers were some of the first to own A-3000 style guns. We have been involved with building after-
market parts, almost from day 1. Along the way, we have improved upon the original design by making minor
modifications internally to improve performance and reliability over the originals. Despite the modifications, our
customers report no issues when installing Bingham aftermarket A-3000 style swivels on their guns. As with all
Bingham products, we can offer you these parts at a tremendous savings over OEM prices.
Page 27
JETECH STYLE
Page 28
HUSKY PUMP
Manifold Carrier Pilot O-Ring
Page 29
HUSKY PUMP
Tie Rod Bearing Bushing
Page 30
HUSKY PUMP
High Pressure Filler Tube
Cylinder
Page 31
HUSKY PUMP
Pony Rod Adapter Pony Rod
Page 32
HUSKY PUMP
High Pressure Low Pressure
O-Ring O-Ring
Page 33
HUSKY PUMP
Outlet Cage Valve Static Seal
Page 34
HUSKY PUMP KITS
Complete Check Valve
Rebuild Kit
Includes:
(1) Inlet Screw 406101
(1) Inlet Poppet 406102
(1) Inlet Seat 406103
(1) Static Seal 406104
(1) HP Seal 406105
(1) HP O-Ring 406106
(1) LP O-Ring 406107
(1) Outlet Seat 406110
(1) Outlet Poppet 406111
(1) Outlet Spring 406112
Includes:
(3) Inlet Screw 406101
(3) Inlet Poppet 406102
(3) Inlet Seat 406103
(3) Static Seal 406104
(3) HP Seal 406105
(3) HP O-Ring 406106
(3) LP O-Ring 406107
(3) Outlet Seat 406110
(3) Outlet Poppet 406111
(3) Outlet Spring 406112
(3) Backup Ring 406015
(3) Dynamic Seal 406016
(3) Lip Seal 406017
(3) Spacer 406018
(3) End Cap Seal 406114
Page 35
NLB STYLE PARTS
Page 36
NLB STYLE PARTS
3/8 HP X 9/16 Type M Hose Fitting 3/8 HP X 1-1/8 Type M Hose Fitting 1-1/8 Type M x 1-1/8 Type M Hose
For 5mm Hose For 8mm Hose For 8mm NLB Style Hose
BMI # 418200 BMI # 418210 BMI # 418220
Page 37
CUTTING
Cutting Head Joint Cutting Head Clamp
Designed for 1” Pipe Designed for 1” pipe
BMI # 409354 BMI # 409350
Working Pressure: 0-55,000 PSI Attaches: 9/16 UHP Tubing
Works as: Designed to attach to cutting head Working Pressure: 0-55,000 PSI
clamps to allow for rotation instead of a fixed Works as: Designed to attach to cutting heads
position to allow for better control of cutting apparatus
Page 38