Professional Documents
Culture Documents
Fairchild PN5434 Datasheet - Retroamplis
Fairchild PN5434 Datasheet - Retroamplis
PN5432
PN5433
PN5434
G TO-92
S
D
N-Channel Switch
This device is designed for analog or digital switching applications where
very low On Resistance is mandatory. Sourced from Process 58. See
J108 for characteristics.
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
OFF CHARACTERISTICS
V(BR)GSS Gate-Source Breakdown Voltage IG = 1.0 µA, VDS = 0 -25 V
IGSS Gate Reverse Current VGS = 15 V, VDS = 0 -200 pA
VGS = 15 V, VDS = 0, TA = 150 °C -200 nA
ID(off) Drain Cutoff Leakage Voltage VGS = 10 V, VDS = 5.0 V -200 pA
VGS = 10 V, VDS = 5.0 V,
TA = 150 °C -200 nA
VGS(off) Gate-Source Cutoff Voltage VDS = 5.0 V, ID = 3.0 nA 5432 -4.0 -10 V
5433 -3.0 -9.0 V
5434 -1.0 -4.0 V
ON CHARACTERISTICS
IDSS Zero-Gate Voltage Drain Current* VDS = 15 V, VGS = 0 5432 150 mA
5433 100 mA
5434 30 mA
VDS(on) Drain-Source On Voltage ID = 10 mA, VGS = 0 5432 50 mV
5433 70 mV
5434 100 mV
rDS(on) Drain-Source On Resistance ID = 10 mA, VGS = 0 5432 2.0 5.0 Ω
5433 7.0 Ω
5434 10 Ω
ID = 0, VGS = 0, f = 1.0 kHz
5432 2.0 5.0 Ω
5433 7.0 Ω
5434 10 Ω
SWITCHING CHARACTERISTICS
td Delay Time VDD = 1.5 V, VGS(on) = 0, 4.0 ns
tr Rise Time ID(on) = 10 mA 1.0 ns
ts Storage Time VGS(off) = 12 V,
VDS(on) = 50 mV 5432 6.0 ns
VDS(on) = 70 mV 5433 6.0 ns
VDS(on) = 100 mV 5434 6.0 ns
tf Fall Time VGS(off) = 12 V 30 ns
TO-92 Packaging
Configuration: Figure 1.0
5 Reels per
(FSCINT) Intermediate Box
Customized
F63TNR Label sample
Label
LOT: CBVK741B019 QTY: 2000 F63TNR
FSID: PN222N SPEC:
Label
FSCINT Label
10,000 units maximum
per intermediate box
for std option
Style “A”, D26Z, D70Z (s/h) Style “E”, D27Z, D71Z (s/h)
FIRST WIRE OFF IS EMITTER (ON PKG. 92) FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON BOTTOM FLAT OF TRANSISTOR IS ON TOP
Hd
P Pd
Ha W1
d S
L
H1 HO
L1
WO t
W2
t1
P1 F1
P2 DO
ELECT ROSTATIC
SEN SITIVE D EVICES
D4 D1
D3
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be effectiveness.
reasonably expected to result in significant injury to the
user.
Definition of Terms
Advance Information Formative or This datasheet contains the design specifications for
In Design product development. Specifications may change in
any manner without notice.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Rev. H2