SUPPLIER DATE 16/06/2023 AWG TF25091G-2 ZUCH PRODUCER Sample PN CUSTOMER ----- WIRE SPEC 29/0.196 + 0,006 mm CB PP CIRCULAR CINZA TER P/N TF25091G-2 SERIAL NUMBER 02TF25091G2011 WIRE TYPE CLARO 3X1,00MM2 NBR NM247-5 I-SHENG BRIS EQUIPMENT Terminal Analysis Measurement System
Name Standard Result Value
Conduction Height 1.40+0.05mm 1.412mm Conduction Width 2.45+0.05mm Acceptable 2.46mm Insulation Height 3.50+0.05mm 3.47mm Insulation Width 3.40+0.05mm 3.42mm Test results Section Reduction Ratio NA NA 25>=x>=5 Compression Ratio NA 75<=x<=95 Cross coun 29 OK 29 Bending angle NA NA x<=30.00Deg Tensile test 130N Mín. OK 189N Appearance discrimination 1.Not honey comb shaped pressing or gap inside Yes [ ] No [ × ]
2.Distance between terminal wall and wings is too short Yes [ ] No [ × ]
3.Distance between terminal bottom and wings is too short Yes [ ] No [ × ]
4.Burr height exceeds material thickness Yes [ ] No [ × ]
5.Burr width exceeds 1/2 of material width Yes [ ] No [ × ]
6.Crimping area to terminal body distorted. Yes [ ] No [ × ]
7.Crimp wing claws not rolled symmetrically Yes [ ] No [ × ]
8.Crimping crack Yes [ ] No [ × ]
9.Crimping is not closed or Of stands width Yes [ ] No [ × ]
10.Single strands outside or single strands squeezes between
Yes [ ] No [ × ] crimp wings
No items should be found in photo while a crimping is accepted