Professional Documents
Culture Documents
MT7986 EDCCA Application Note
MT7986 EDCCA Application Note
Onl
Use
CONFIDENTIAL
INTERNAL USE A
sz.c tial
MT7986
om
@ tw iden
EDCCA
Application note
ong onf
ngy k C
gdi aTe
CTD/SE2/CS6
BR Hsieh
jian Medi
For
How to use EDCCA Command
y
Onl
▪ Set command
Use
• EDCCAEnable
sz.c tial
▪ iwpriv ra0 set EDCCAEnable=0/1 (1 : Auto mode, 0 : Force Disable)
▪ Auto mode : EDCCA will detect energy and block TX when energy is over threshold.
om
@ tw iden
▪ Force disable : EDCCA will ignore energy.
• EDCCAThreshold
ong onf
▪ iwpriv ra0 set EDCCAThreshold=BandwidthID : Threshold
• BandwidthID
ngy k C
▪ 0: BW20 , 1: BW40 , 2: BW80
▪ 127: Reset
gdi aTe
• If EDCCACfgMode=1, It will reset to the value that you enter last time.
• If EDCCACfgMode=0, It will reset to Profile setting or HW setting.
• Threshold
jian Medi
▪ xxdbm (Only Positive value, ex. If you want to set to -60dbm, you should enter 60)
▪ 127 is invalid value, means not going to set
▪ Range : (0 , -126) dbm
▪ Show command
• iwpriv ra0 show EDCCAEnable
• Iwpriv ra0 show EDCCAThreshold
For
CONFIDENTIAL A
How to use EDCCA profile
y
Onl
▪ EDCCAEnable=0/1
Use
• 0 : Disable
sz.c tial
• 1 : Enable
om
@ tw iden
▪ EDCCAThreshold=xx:yy:zz
ong onf
• xx : Pri/Sec BW20 Threshold
ngy k C
• yy : Sec BW40 Threshold
gdi aTe
• zz : Sec BW80 Threshold
▪ EDCCACfgMode=0/1 jian Medi
• 0 : EDCCA reset value will follow profile/HW setting
• 1 : EDCCA reset value will follow cmd setting
For
CONFIDENTIAL A