Professional Documents
Culture Documents
JNCIS-SP Certification - Juniper Networks US
JNCIS-SP Certification - Juniper Networks US
The Service Provider Routing and Switching track enables you to demonstrate a thorough
understanding of networking technology in general and Juniper Networks service provider routing and
switching platforms. JNCIS-SP, the specialist-level certification in this track, is designed for networking
professionals with beginner to intermediate knowledge of routing and switching implementations in
Junos. The written exam verifies your basic understanding of routing and switching technologies and
related platform configuration and troubleshooting skills.
JNCIA-Junos:
JNCIA-Junos: Junos, Associate. For details, see JNCIA-Junos .
JNCIS-SP:
JNCIS-SP: Service Provider Routing and Switching, Specialist. For details, see the sections below.
JNCIP-SP:
JNCIP-SP: Service Provider Routing and Switching, Professional. For details, see JNCIP-SP.
JNCIE-SP:
JNCIE-SP: Service Provider Routing and Switching, Expert. For details, see JNCIE-SP.
Exam
Preparation
We recommend the following resources to help you
prepare for your exam. However, these resources aren't
required, and using them doesn't guarantee you'll pass
the exam.
https://www.juniper.net/us/en/training/certification/tracks/service-provider-routing-switching/jncis-sp.html Page 1 of 6
JNCIS-SP Certification | Juniper Networks US 30/05/24, 2:45 PM
Exam Objectives
Here’s a high-level view of the skillset required to successfully complete the JNCIS-SP certification
exam.
Link-state database
OSPF packet types
Router ID
Adjacencies and neighbors
Designated router and backup designated router
Open Shortest OSPF area and router types
Path First (OSPF) Link-state adver!sement (LSA) packet type
Demonstrate knowledge of how to configure, monitor, or troubleshoot
OSPF:
https://www.juniper.net/us/en/training/certification/tracks/service-provider-routing-switching/jncis-sp.html Page 2 of 6
JNCIS-SP Certification | Juniper Networks US 30/05/24, 2:45 PM
Troubleshoo!ng tools
Link-state database
IS-IS protocol data units (PDUs)
Type, length, values (TLVs)
Adjacencies and neighbors
Intermediate Levels and areas
System to Designated intermediate system (DIS)
Intermediate Metrics
System (IS-IS) Demonstrate knowledge of how to configure, monitor, or troubleshoot
IS-IS:
https://www.juniper.net/us/en/training/certification/tracks/service-provider-routing-switching/jncis-sp.html Page 3 of 6
JNCIS-SP Certification | Juniper Networks US 30/05/24, 2:45 PM
MPLS terminology
MPLS packet header
End-to-end packet flow and forwarding
Labels and the label informa!on base
MPLS and rou!ng tables
Mul!protocol Label
RSVP
Switching (MPLS)
LDP
Segment rou!ng
Demonstrate knowledge of how to configure, monitor, or troubleshoot
MPLS:
MPLS forwarding
RSVP-signaled and LDP-signaled Label-Switched Paths (LSPs)
Interfaces
Sta!c routes
Dynamic rou!ng (OSPFv3, IS-IS, BGP)
IPv6 over IPv4 tunneling
GRE
https://www.juniper.net/us/en/training/certification/tracks/service-provider-routing-switching/jncis-sp.html Page 4 of 6
JNCIS-SP Certification | Juniper Networks US 30/05/24, 2:45 PM
LAG
Graceful restart, GRES, NSB, and NSR
Virtual Router Redundancy Protocol (VRRP)
Exam Details
Exam questions are derived from the recommended
training and the exam resources listed above. Pass/fail
status is available immediately after taking the exam.
The exam is only provided in English.
Recertification
https://www.juniper.net/us/en/training/certification/tracks/service-provider-routing-switching/jncis-sp.html Page 5 of 6
Recertification
JNCIS-SP Certification | Juniper Networks US 30/05/24, 2:45 PM
Juniper certifications are valid for three years. For more information, see Recertification.
Register
Register for
for Exam
Exam
https://www.juniper.net/us/en/training/certification/tracks/service-provider-routing-switching/jncis-sp.html Page 6 of 6