Professional Documents
Culture Documents
(EX) Procedure For Upgrading Virtual Chassis
(EX) Procedure For Upgrading Virtual Chassis
(EX) Procedure For Upgrading Virtual Chassis
Description
This KB article provides information about the procedures to
upgrade an existing EX8200 Virtual Chassis (VC).
The methods are:
Standard procedure which requires downtime for the entire EX-
8200 VC.
NSSU (Nonstop Software Upgrade).
Solution
https://supportportal.juniper.net/s/article/EX-Procedure-for-upgrading-Virtual-Chassis?language=en_US Page 1 of 4
[EX] Procedure for upgrading Virtual Chassis 05/06/24, 9:32 PM
Validating on member9
Validating on member0-re0
Validating on member0-re1
Validating on member1-re0
Validating on member1-re1
Validating on member8
member9:
WARNING: A reboot is required to install
the software
WARNING: Use the 'request system reboot'
command immediately
member0-re0:
WARNING: A reboot is required to install
the software
WARNING: Use the 'request system reboot'
command immediately
member0-re1:
WARNING: A reboot is required to install
the software
WARNING: Use the 'request system reboot'
command immediately
member1-re0:
WARNING: A reboot is required to install
the software
WARNING: Use the 'request system reboot'
command immediately
member1-re1:
WARNING: A reboot is required to install
the software
WARNING: Use the 'request system reboot'
command immediately
https://supportportal.juniper.net/s/article/EX-Procedure-for-upgrading-Virtual-Chassis?language=en_US Page 2 of 4
[EX] Procedure for upgrading Virtual Chassis 05/06/24, 9:32 PM
member8:
WARNING: A reboot is required to install
the software
WARNING: Use the 'request system reboot'
command immediately
After the reboot, all of the EX8200-VC's will come up with the
new Junos Software installed.
Modification History
2020-08-14: Article reviewed for accuracy; no changes required.
https://supportportal.juniper.net/s/article/EX-Procedure-for-upgrading-Virtual-Chassis?language=en_US Page 3 of 4
[EX] Procedure for upgrading Virtual Chassis 05/06/24, 9:32 PM
https://supportportal.juniper.net/s/article/EX-Procedure-for-upgrading-Virtual-Chassis?language=en_US Page 4 of 4