Professional Documents
Culture Documents
Workmate 79001
Workmate 79001
Workmate 79001
MAN UAL
Model 79-001
DUAL
2 II
MODEL
4 317/a" Workbench Height
23‘/4" Sawhorse Height D
. I AH
Holds lumber up to 12 inches wide. ideal ’
V ‘
. ‘.\ . > V’ ‘ ,, V’ ‘
\D / - ‘ ’
«. V
we :Ka‘ ._ -.
4 swivel grips hold odd shaped items Vise jaws hold mitre box securely lor pre- WORKMATE® Work Center is light-
securely for Sanding. Sawing. fouling. cise cuts. weight, portable and-compact for easy
«» storage.
Setting up WORKMATEQ
portable work center and
vise.
The Work Center sets upessily into
two working heights: the lower "saw
horse" height and the upper "work-
bench" height. Choose the position
best suited to your particular job. In
each case. The Work Center provides
a convenient and rigid work surface.
Remainder of Work
Center omitted for
clarity.
SAW HORSE
FOOT
3. This is the lower "sawhorse" height,
measuring 23%" high. Be sure The Work
Center looks into position.
5. Always make sure that each leg is
swung into its extended position. This will
ensure safe use of The Work Center at this
upper working height.
Lower Sawhorse Feet
, . '25. if:
4. To raise The Work Center to its full
"workbench” height of 32%", extend the
4 base legs as shown.
N
. Fold in all four base legs and clamp in
bench” position. locked position.
Do not use The Work Center a_s a
#9’
Place one foot on step.
.
doors or in darnpareas.
.‘‘.°‘‘’'
A . .
clamping in only lower half -of the vise You can now store WORKMATE con-
jaws or when using the swivelgrips.
V
Maintenance Tips
1.Pivot screws are of low friction design.
No lubrication is necessary.
2. if binding of visa jaw occurs, cleaning
or lubrication of slider and vise screw
may be required.
3. Pivot screws should be checked for
tightness.
VISE
“W5 --I—-— VISE HANDLE
RELEASE BUTTON
RETAINER
LATCH
PIVOT scnEws
LOWER SAW HORSE
FOOT
/ BASE
RUBBER FOOT
CAUTION
1. Do not apply weight in excess of 350
pounds.
2. Do not use as a ladder or standing plat-
form.
Working with your
WORKMATE® portable
work center and vise a
Suggested Sizes
A. Mounting Board 12"x12"x3/8".
B. Vise Block 2”x4”x6".
C. Retaining Board 3"x3”x1/4".
D. Bolt 5".
A«->
General Purpose’Table
Suggested Sizes:
2'x6’x1/4" plywood .
Caution: » g ,
with less frustration, when the swivel grips 5_ If You have a hobby that mquires 3
take h°'d 0‘ the P'°blem- steady work surface, The WORKMATEO
Work Center provides it. It's the vise and
work center that lets you get at your
project from any angle.
. HOME USE
WARRANTY 79-010 Swivel Grips
(A Full One Year Warranty) (2)
For additional versatility in
Black 8.Decker warrants this product holding oblecta or to replace lost
for one year. We will repair. without we’re in
charge. any defects due to faulty
material or workmanship or at our op-
tion replace the product free. Please
We
i