Professional Documents
Culture Documents
Canon PowerShot A70 PowerShot A60 CHAPTER 3. REPAIR INSTRUCTION
Canon PowerShot A70 PowerShot A60 CHAPTER 3. REPAIR INSTRUCTION
REPAIR INSTRUCTION
CONTENTS
1. Before Starting the Repair Work
1.1 Precaution on Flash High Tension Circuit ------------------------------------------------------------------------------ 3-1
1.2 List of Tools ----------------------------------------------------------------------------------------------------------------- 3-1
1.3 List of Supplies ------------------------------------------------------------------------------------------------------------- 3-1
1.4 Flexible Connector --------------------------------------------------------------------------------------------------------- 3-2
2. Disassembly/Assembly
2.1 Procedure -------------------------------------------------------------------------------------------------------------------- 3-3
2.2 BAYONET METAL UNIT, BAYONET METAL, BAYONET CUP --------------------------------------------- 3-4
2.3 DECORATION COVER -------------------------------------------------------------------------------------------------- 3-5
2.4 GRIP CAP UNIT, CF COVER ------------------------------------------------------------------------------------------- 3-6
2.5 REAR COVER UNIT, STRAP PLATE, LCD WINDOW ----------------------------------------------------------- 3-7
2.6 FRONT COVER UNIT, LENS BARREL SHEET -------------------------------------------------------------------- 3-8
2.7 BATTERY COVER UNIT, BATTERY COVER SHAFT, BATTERY COVER SPRING --------------------- 3-9
2.8 DIAL UNIT ----------------------------------------------------------------------------------------------------------------3-10
2.9 OPERATE MODULE UNIT --------------------------------------------------------------------------------------------3-11
2.10 CF UNIT ------------------------------------------------------------------------------------------------------------------- 3-12
2.11 FINDER UNIT ------------------------------------------------------------------------------------------------------------3-13
2-12 LCD PANEL, BACK LIGHT UNIT (1) -------------------------------------------------------------------------------3-14
2.13 LCD PANEL, BACK LIGHT UNIT (2) -------------------------------------------------------------------------------3-15
2.14 MICROPHONE UNIT ---------------------------------------------------------------------------------------------------3-16
2.15 MAIN MODULE UNIT ------------------------------------------------------------------------------------------------- 3-17
2.16 MAIN SHIELD CASE A, MAIN SHIELD CASE B ----------------------------------------------------------------3-18
2.17 BATTERY BOX UNIT ------------------------------------------------------------------------------------------------- 3-19
2.18 CONNECTOR UNIT -----------------------------------------------------------------------------------------------------3-20
2.19 FLASH UNIT --------------------------------------------------------------------------------------------------------------3-21
2.20 OPTICAL UNIT ---------------------------------------------------------------------------------------------------------- 3-22
2.21 CCD UNIT, CCD WASHER --------------------------------------------------------------------------------------------3-23
2.22 CCD RUBBER, IR FILTER, CCD SPRING --------------------------------------------------------------------------3-24
2.23 DC MODULE UNIT -----------------------------------------------------------------------------------------------------3-25
2.24 Disassembling the OPTICAL UNIT ------------------------------------------------------------------------------------3-26
2.25 Assembling the Optical Unit ---------------------------------------------------------------------------------------------3-27
2.26 Screw List ----------------------------------------------------------------------------------------------------------------- 3-28
3. Adjustments
3.1 Replacement Parts and Adjustment Items ----------------------------------------------------------------------------- 3-29
3.2 Adjustment Tools ----------------------------------------------------------------------------------------------------------3-30
3.3 Before Starting Electrical Adjustments ---------------------------------------------------------------------------------3-31
3.3.1 TWAIN Driver Installation --------------------------------------------------------------------------------------3-31
3.3.2 Factory Mode Driver Installation -------------------------------------------------------------------------------3-31
3.3.3 Adjustment Software Installation -------------------------------------------------------------------------------3-33
3.3.4 Preparation -------------------------------------------------------------------------------------------------------- 3-34
3.3.5 Starting up the Adjustment Software ---------------------------------------------------------------------------3-35
3.3.6 Menu Window -----------------------------------------------------------------------------------------------------3-35
3.3.7 How to Use the Adjustment Software -------------------------------------------------------------------------3-35
3.4 Calibration ----------------------------------------------------------------------------------------------------------------- 3-36
3.4.1 Calibration -------------------------------------------------------------------------------------------------------- 3-36
3.5 Adjustment Procedure -----------------------------------------------------------------------------------------------------3-41
3.5.1 CCD Adjustment ------------------------------------------------------------------------------------------------- 3-41
3.5.2 Optical Unit Adjustment ---------------------------------------------------------------------------------------- 3-43
3.5.3 Imaging Process Adjustment ------------------------------------------------------------------------------------3-45
3.5.4 Color Adjustment -------------------------------------------------------------------------------------------------3-48
3.5.5 Pixel Dot Adjustment --------------------------------------------------------------------------------------------3-50
3.5.6 Flash Adjustment -------------------------------------------------------------------------------------------------3-52
3.5.7 Checking of sound recording/output ---------------------------------------------------------------------------3-54
CHAPTER 3. REPAIR INSTRUCTION
CAUTION:
Be careful of electric shock because the circuit is the high tension circuit.
Green Yellow
terminal
terminal
FLASH UNIT
The contact-piece
should face LOCK
downwards
UNLOCK
2 Type B
LOCK
UNLOCK The contact-piece
should face
downwards
3 Type C
4 Type D
The contact-piece
should face
table sides
CAUTIONS:
1. For the connectors of Type A and Type B, set them to the unlocked
state before removing and inserting flexible card. After flexible card
is inserted, set them to the locked state.
2. The flexible card is equipped with the holes as shown. Use them for
removal and insertion by inserting the tweezers into them as required.
Fig. 3-3 Holes for removal
3-2
CHAPTER 3. REPAIR INSTRUCTION
2. Disassembly/Assembly
2.1 Procedure
Disassembling procedure of PowerShot A70/A60 is shown by the following flowchart.
Reverse the disassembling procedure to reassemble them. * The pages to refer are shown in parenthesis ( ).
Be careful of high tension.
BAYONET METAL UNIT (3-4)
CF UNIT (3-12)
LCD PANEL ,
BACK LIGHT UNIT (1) (3-14)
LCD PANEL ,
MICROPHONE UNIT (3-16) BACK LIGHT UNIT (2) (3-15)
3-3
CHAPTER 3. REPAIR INSTRUCTION
(1)-1
BAYONET LOCK BUTTON
NOTE (Assembling)
Fix the outer BAYONET METAL
and inner BAYONET CUP after
coating the DIABOND 1663G.
BAYONET METAL
(2)-1
(1)-1
BAYONET LOCK BUTTON
(2)-1
BAYONET CUP
(2)-1 (1)-1
BAYONET METAL BAYONET METAL UNIT
BAYONET CUP
DIABOND 1663G coating area
3-4
CHAPTER 3. REPAIR INSTRUCTION
(1)-2
Claws
(1)-2
(1)-3
a FRONT COVER B TAPE
(1)-1
(1)-2
DECORATION COVER
a
XA1-7170-207
2.0mm
METAL
M1.7
3-5
CHAPTER 3. REPAIR INSTRUCTION
(1)-5
(2)-1 GRIP CAP UNIT
CF COVER
(1)-1 (1)-5
(1)-2 BATTERY COVER
g
(1)-1
(1)-3
(2)-1
CF COVER
(1)-4
c
BATTERY COVER
BATTERY COVER
LOCK LEVER
(1)-3
STRAP PLATE
g c
XA4-9170-357 XA4-9170-557
3.5mm
5.5mm
METAL
M1.7 METAL
(SELF TAP) M1.7
(SELF TAP)
3-6
CHAPTER 3. REPAIR INSTRUCTION
(1)-4 (3)-1
REAR COVER UNIT a LCD WINDOW
(2)-2 (1)-3
STRAP PLATE
(1)-4
Claws (3)-1
(1)-4
FLASH UNIT c
(1)-2
CAUTION c a
XA4-9170-557 XA1-7170-207
Green Yellow
2.0mm
Never touch the terminals 5.5mm METAL
of the capacitor ! M1.7
Be sure to discharge the capacitor
terminal METAL
terminal with the discharging resistor
M1.7
1kΩ,approx. 5W (about 1kΩ/5W) ! (SELF TAP)
(1)-3
BATTERY COVER LOCK LEVER
(1)-4
a
(1)-1
(2)-2
LENS BARREL SPACER
(2)-1
LENS BARREL SHEET
CAUTION
b Be careful not to drop the LENS BARREL SHEET.
(1)-2
(1)-4
FRONT COVER UNIT
a b
XA1-7170-207 XA4-9170-407
2.0mm
4.0mm
METAL
M1.7
METAL
M1.7
(SELF TAP)
3-8
CHAPTER 3. REPAIR INSTRUCTION
(1)-1
BATTERY COVER SHAFT
(1)-1
BATTERY COVER SPRING
BATTERY COVER
SPRING CAUTION
(1)-1 Be careful not to drop the
BATTERY COVER SPRING
BATTERY COVER
(1)-2
SHAFT
BATTERY COVER UNIT
Fig. 3-9 BATTERY COVER UNIT, BATTERY COVER SHAFT, BATTERY COVER SPRING
3-9
CHAPTER 3. REPAIR INSTRUCTION
e
(1)-1
(1)-1
DIAL UNIT
e
XA1-7170-257
2.5mm
METAL
M1.7
3-10
CHAPTER 3. REPAIR INSTRUCTION
(1)-3
CF LEVER
CAUTION
NOTE-1 (Assembling)
Dowels
(1)-2
Dowels
Dowels
NOTE-1 (Assembling)
Align with the two dowels for position setting and six projected parts for
position setting of the main frame. h
XA1-7170-307
3.0mm
METAL
M1.7
Fig. 3-11 OPERATE MODULE UNIT
CAUTION
Be careful not to drop the CF LEVER.
CF LEVER
(1)-3
h
Dowels (1)-1
NOTE (Assembling)
(1)-4
Align the CF UNIT with the two dowels for position g CF UNIT
setting of the main frame. (1)-2
g h
XA4-9170-357 XA1-7170-307
3.5mm 3.0mm
METAL
METAL
M1.7
M1.7
(SELF TAP)
2.10 CF UNIT
(1) CF UNIT
1. Remove the screw g on the BATT BOX side.
2. Remove the screw h on the CHASSIS side.
3. Disconnect the CF FPC connector.
4. Remove the two dowels for position setting of the main frame, and remove the CF UNIT.
NOTE (Assembling)
Align the CF UNIT with the two dowels for position setting of the main frame.
CAUTION
Be careful not to drop the CF LEVER.
3-12
CHAPTER 3. REPAIR INSTRUCTION
d
(1)-1
(1)-1
FINDER UNIT
(1)-2
SHADING SHEET
CAUTION
Be careful not to drop the SHADING SHEET.
d
XA4-9140-357
3.5mm
METAL
M1.4
(SELF TAP)
3-13
CHAPTER 3. REPAIR INSTRUCTION
(1)-1
M-S FFC
e
(1)-3
(1)-2
(1)-5
LCD PANEL,
BACK LIGHT UNIT
Dowels e (1)-3
(1)-2
NOTE (Assembling) f
Align it with the position settings of the main frame. (1)-4
e f
XA1-7170-257 XA4-9170-457
2.5mm
4.5mm
METAL
M1.7
METAL
M1.7
(SELF TAP)
3-14
CHAPTER 3. REPAIR INSTRUCTION
(1)-1
Claws
(1)-1
Claws
LCD PANEL
3-15
CHAPTER 3. REPAIR INSTRUCTION
(1)-1
OPTICAL FPC
(1)-2
MICROPHONE CABLE
(1)-3
MICROPHONE BUSH (1)-3
MICROPHONE UNIT
3-16
CHAPTER 3. REPAIR INSTRUCTION
(1)-1
(1)-3
MAIN MODULE UNIT
(1)-3
(1)-5
(1)-5 (1)-3
M-D FPC
(1)-4
M-J FPC SHEET (1)-1
(1)-4 (1)-5
M-J FPC e (1)-2
NOTE (Assembling) M-J FPC SHEET
Attach the M-J FPC SHEET at the
position as shown in the illustration.
M-J FPC
MAIN MODULE
UNIT
e
XA1-7170-257
2.5mm
METAL
M1.7
Fig. 3-17 MAIN MODULE UNIT
3-17
CHAPTER 3. REPAIR INSTRUCTION
NOTE1 (Assembling)
(1)-1
MAIN SHIELD CASE A (1)-2
MAIN SHIELD CASE B
Soldering
(1)-2
Soldering
(1)-1
NOTE2 (Assembling)
MAIN PCB
Soldering
(1)-1
MAIN SHIELD CASE A
(1)-2
Soldering
MAIN SHIELD CASE B
3-18
CHAPTER 3. REPAIR INSTRUCTION
B-D CABLE
Black
(1)-3
(1)-1 Soldering
Dowel
(1)-3
BAYONET LOCK (1)-2
(1)-3 g
Hole
3.5mm
METAL
M1.7
(SELF TAP)
Fig. 3-19 BATTERY BOX UNIT
3-19
CHAPTER 3. REPAIR INSTRUCTION
(1)-1
Soldering
(1)-1
S-D CABLE
(1)-2 M-J FFC
e
(1)-3
(1)-3 CONNECTOR UNIT
e
XA1-7170-257
2.5mm
METAL
M1.7
3-20
CHAPTER 3. REPAIR INSTRUCTION
NOTE-1 (Assembling)
Align the position setting dowel of
the FLASH UNIT. h (1)-2 (1)-3
Dowel with the corresponding
FLASH UNIT
position.
NOTE2 (Assembling)
Attach the double-sided adhesive
(1)-1
tape on the capacitor.
(1)-3
h
XA1-7170-307
3.0mm
METAL
M1.7
3-21
CHAPTER 3. REPAIR INSTRUCTION
NOTE (Assembling)
Align the two position setting dowels of the OPTICAL UNIT
with the corresponding position settings of MAIN FRAME.
Dowels
MAIN FRAME
(1)-3 (1)-2
ST PLATE
e
(1)-4 (1)-1
OPTICAL UNIT e
e
XA1-7170-257
2.5mm
METAL
M1.7
3-22
CHAPTER 3. REPAIR INSTRUCTION
OPTICAL UNIT
NOTE (Assembling)
Attach the EMI 1 SHEET in the way as if sandwiching
the flexible board of the CCD UNIT with the EMI 1 SHEET.
(1)-4
EMI 1 SHEET
CAUTION
Be careful not to drop the
CCD WASHER.
(1)-3
CCD WASHER
(1)-1
j
(1)-2
CCD UNIT
j
FC3-0021-000
3.0mm
METAL
M1.4
(SELF TAP)
3-23
CHAPTER 3. REPAIR INSTRUCTION
OPTICAL UNIT
CAUTION
Be careful not to drop the
CCD SPRING. (Only A70)
(1)-3
CCD SPRING
(1)-1
CCD RUBBER
Large (White)
Small (White)
3-24
CHAPTER 3. REPAIR INSTRUCTION
(1)-1
M-D FPC
(1)-2
MAIN FRAME e
(1)-3 (1)-3
DC MODULE UNIT
e
XA1-7170-257
2.5mm
METAL
M1.7
3-25
CHAPTER 3. REPAIR INSTRUCTION
Insert tweezers
Insert tweezers (1)-3 ~ (1)-7 Names of Parts
or the like. (1)-2
or the like. (1)-1
BARRIER PLATE 2 SPRING
BARRIER PLATE 2
BARRIER CLOSE
SPRING BARRIER PLATE 1
BARRIER
BARREL CUP CLOSE
SPRING
BARRIER
LENS BARREL PLATE 1
(1)-3 BARRIER PLATE 2
CAP
(1)-5 BARRIER PLATE 2 SPRING
(1)-3 (1)-8 (1)-4
(1)-4 (1)-5 NOTE (Assembling)
i (1)-6
(1)-10 (1)-8
(1)-7 (1)-7
(1)-6 (1)-9
BARRIER BASE
BARRIER
DRIVE
BARRIER RING
OPEN (1)-11 DC2.5V DC2.5V
SPRING
i
(1)-10
XA4-5140-357
BARRIER 3.5mm
OPEN
SPRING METAL
(1)-10 M1.4
(SELF TAP)
BARREL CUP
(1)-6
DC2.5V DC2.5V
(1)-9 BARRIER BASE NOTE 1 (Assembling)
BARRIER
DRIVE
BARRIER RING
OPEN (1)-11
SPRING i
(1)-10 XA4-5140-357
BARRIER 3.5mm
OPEN
SPRING METAL
(1)-10 M1.4
(SELF TAP)
a b c
XA1-7170-207 XA4-9170-407 XA4-9170-557
2.0mm
4.0mm
METAL 5.5mm
M1.7
METAL
M1.7 METAL
(SELF TAP) M1.7
(SELF TAP)
d e f
XA4-9140-357 XA1-7170-257 XA4-9170-457
3.5mm 2.5mm
4.5mm
METAL
METAL M1.7
M1.4 METAL
(SELF TAP) M1.7
(SELF TAP)
g h i
XA4-9170-357 XA1-7170-307 XA4-5140-357
METAL
METAL METAL
M1.7
M1.7 M1.4
(SELF TAP) (SELF TAP)
j
FC3-0021-000
3.0mm
METAL
M1.4
(SELF TAP)
3-28
CHAPTER 3. REPAIR INSTRUCTION
3. Adjustments
3.1 Replacement Parts and Adjustment Items
PowerShot A70/A60 requires electrical adjustments when certain parts are replaced.
The table below indicates the adjustments required for the respective part replacements.
For all other parts not listed below, no electrical adjustments are necessary after replacement.
OPTICAL UNIT #1 #2
FLASH UNIT
MAIN PCB ASS’Y
LCD PANEL
BACK LIGHT UNIT
∗ When CCD or OPTICAL UNIT is replaced, adjust certainly at the procedure as below.
#1. CCD Adjustment
3-29
CHAPTER 3. REPAIR INSTRUCTION
*1
2pcs. required.
*2
The file containing “How to print out” and Chart for print-out is in the Service Manual APPENDIX.
3-30
CHAPTER 3. REPAIR INSTRUCTION
If InstallShield Wizard appears as shown in the first picture below, install the TWAIN (Factory Mode) Driver
by following the instructions.
1
The InstallShield Wizard will install TWAIN
) Driver on your computer.
2
) License Agreement
3-31
CHAPTER 3. REPAIR INSTRUCTION
3
Choose Destination Location
) Select folder where Setup will install files.
4
) InstallShield Wizard Complete
If you cannot install Factory Mode Driver in above procedure, install it in the following procedure.
1. Change the camera to Factory mode.
2. Install Wizard of new hardware starts up.
3. Select the option that directly chooses the driver’s place.
4. Choose CAP_FACT.INF
(Factory Mode Driver\Win2000_98\Win_2k98\CAP_FACT.INF).
5. Installment starts. When the Wizard finishes, the installment finishes.
3-32
CHAPTER 3. REPAIR INSTRUCTION
3. When the dialog box below appears, click the button. (Software installation will then begin.)
4. When the dialog box below appears, click the “Continue” button.
(In the case that you do not add a shortcut on desktop, remove clicking from the check box.)
3-33
CHAPTER 3. REPAIR INSTRUCTION
3.3.4 Preparation
Before starting up the Adjustment Software, follow the preparatory steps below:
3 Connect the Camera to the Power Source with the Compact Power Adapter CA-PS500 and AC Cable.
4. Set the Replay Mode on the camera and turn on.
5. Set the Communication Mode to Normal.
Personal Computer
USB
IFC-300PCU
INTERFACE CABLE
CAMERA BODY
DIGITAL
6. Connect the Camera’s Digital terminal to the PC’s USB Port with INTERFACE CABLE IFC-300
PCU.
7. Turn on the camera.
Note: Perform the preparation in the following order otherwise the camera won’t work properly.
3-34
CHAPTER 3. REPAIR INSTRUCTION
3-35
CHAPTER 3. REPAIR INSTRUCTION
3.4 Calibration
3.4.1 Calibration
■ Tools Used
• Personal Computer • Brightness Box (light source A) • FL-W Filter
• ADJUSTMENT SOFTWARE • Color Viewer (5600° K) • ND-2 Filter
• Compact Power Adapter CA-PS500 • Color Bar Chart • ND-4 Filter
• AC Cable • W-10 Filter (2pcs.) • ND-8 Filter
• INTERFACE CABLE IFC-300PCU • C-12 Filter • Reference Camera (Merchandise)
3-36
CHAPTER 3. REPAIR INSTRUCTION
Stand
Personal
Computer
3-37
CHAPTER 3. REPAIR INSTRUCTION
Stand
Personal
Computer
Stand
Personal
Computer
3-38
CHAPTER 3. REPAIR INSTRUCTION
13 1. Attach the Color Bar Chart to the Color Viewer. Color Bar Chart
2. Place the camera so that the Viewing image of Color Viewer
the color bar chart is the full of LCD with the
ND-4 Filter attached.
3. Click the “ADJUST” button. ND-4
Filter
CAMERA
BODY
Power
Source
Personal Stand
Computer
3-39
CHAPTER 3. REPAIR INSTRUCTION
3-40
CHAPTER 3. REPAIR INSTRUCTION
■ Tools Used
• Personal Computer • INTERFACE CABLE IFC-300PCU
• ADJUSTMENT SOFTWARE • Brightness Box (light source A)
• Compact Power Adapter CA-PS500 • C-12 Filter
• AC Cable
Personal
Computer
3-41
CHAPTER 3. REPAIR INSTRUCTION
3-42
CHAPTER 3. REPAIR INSTRUCTION
■ Tools Used
• Personal Computer • INTERFACE CABLE IFC-300PCU
• ADJUSTMENT SOFTWARE • AutoFocus Chart
• Compact Power Adapter CA-PS500 • Zoom Chart
• AC Cable • Tripod
3-43
CHAPTER 3. REPAIR INSTRUCTION
3-44
CHAPTER 3. REPAIR INSTRUCTION
■ Tools Used
• Personal Computer • W-10 Filter (2 pcs.)
• ADJUSTMENT SOFTWARE • C-12 Filter
• Compact Power Adapter CA-PS500 • FL-W Filter
• AC Cable • ND-2 Filter
• INTERFACE CABLE IFC-300PCU • Tripod
• Color Viewer (5600° K)
Stand
Personal
Computer
3-45
CHAPTER 3. REPAIR INSTRUCTION
Stand
Personal
Computer
Stand
Personal
Computer
3-46
CHAPTER 3. REPAIR INSTRUCTION
3-47
CHAPTER 3. REPAIR INSTRUCTION
■ Tools Used
• Personal Computer • INTERFACE CABLE IFC-300PCU
• ADJUSTMENT SOFTWARE • Color Viewer (5600° K)
• Compact Power Adapter CA-PS500 • Color Bar Chart
• AC Cable • ND-4 Filter
3 1. Attach the Color Bar Chart to the Color Viewer. Color Bar Chart
2. Place the camera so that the Viewing image of Color Viewer
the color bar chart is the full of LCD with the
ND-4 Filter attached.
3. Click the “ADJUST” button. ND-4
Filter
CAMERA
BODY
Power
Source
Personal Stand
Computer
3-48
CHAPTER 3. REPAIR INSTRUCTION
* Specification
Ave_Cr = Reference Camera ± 10
Ave_Cb = Reference Camera ± 10
3-49
CHAPTER 3. REPAIR INSTRUCTION
■ Tools Used
• Personal Computer • INTERFACE CABLE IFC-300PCU
• ADJUSTMENT SOFTWARE • Brightness Box (Light source A)
• Compact Power Adapter CA-PS500 • C-12 Filter
• AC Cable • Light-Shielding Cloth (500 × 500 or larger)
Personal
Computer
3-50
CHAPTER 3. REPAIR INSTRUCTION
3-51
CHAPTER 3. REPAIR INSTRUCTION
■ Tools Used
• Personal Computer • INTERFACE CABLE IFC-300PCU
• ADJUSTMENT SOFTWARE • 18% Gray Chart
• Compact Power Adapter CA-PS500 • Tripod
• AC Cable
3 1. Set 18% Gray Chart 60cm from the Finder 18% Gray Chart
front.
2. Make the room as dark as a darkroom.
3. Click the “ADJUST” button.
60cm
Power
Source
CAMERA
BODY
Personal Tripod
Computer
3-52
CHAPTER 3. REPAIR INSTRUCTION
3-53
CHAPTER 3. REPAIR INSTRUCTION
3-54