Professional Documents
Culture Documents
Eim NC Ii - Trainees Record Book
Eim NC Ii - Trainees Record Book
Eim NC Ii - Trainees Record Book
AUTHORITY
Region III - Province of Bulacan
Regional Training Center Central Luzon - Guiguinto
ID PHOTO
Name of Trainee
Training Program
No. of Hours:
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY
Regional Training Center Central Luzon - Guiguinto
Instructions:
The Trainee’s Record Book contains all the required competencies in your
chosen qualifications. All you have to do is to fill out all the columns, “Task
Required” and “Date accomplished”, with all the activities in accordance with
the training program and to be taken up in the training center and with the
guidance of the instructor. The instructor will likewise, indicate his remarks on
the “Instructor’s Remarks” column regarding the outcome of the task
accomplished by the trainee. Be sure that the trainee will personally
accomplish the task and this must be confirmed by the instructor.
Thank You.
LUPANG HINIRANG
Bayang magiliw
Perlas ng Silanganan,
Alab ng puso,
Sa dibdib mo’y buhay.
Lupang Hinirang,
Duyan ka ng magiting,
Sa manlulupig,
Di ka pasisiil.
Sa dagat at bundok,
Sa simoy at sa langit mong bughaw,
May dilag ang tula
At awit sa paglayang minamahal.
Ang kislap ng watawat mo’y
Tagumpay na nagniningning,
Ang bituin at araw niya
Kailan pa ma’y di magdidilim.
Lupa ng araw, ng luwalhati’t pagsinta,
Buhay ay langit sa piling mo;
Aming ligaya, na pag may mang-aapi
Ang mamatay ng dahil sa iyo.
Panunumpa Sa Watawat ng Pilipinas
Ako ay Pilipino,
Buong katapatang nanunumpa sa watawat
ng Pilipinas,
At sa bansang kanyang sinasagisag,
Na may dangal, katarungan at kalayaan,
Na pinakikilos ng sambayanang
Maka-Diyos, Maka-kalikasan, Maka tao at
Maka bansa.
VISION
MISSION
1. Entrance gate of the Training Center shall be opened at exactly 7;00 o’clock in the morning
and close at 900 o’ clock in the evening from Monday to Friday .
2. Wearing oi ID’s is must at all times .
3. Observe proper uniform / dresscode at all times.
4. Person wearing slippers,sandos and short pants are not allowed to the center ‘s premises.
5. Smoking is not allowed inside the training center premises.
6. Vandalism ( writing on tables,chairs and walls ) is strictly probihited.
7. Defacing and destroying any part of the building is strictly prohibited.
8. Alcoholic beverages, prohibited drugs and deadly weapons are strictly prohibited inside the
center primises.
9. Gambling or any forms of money games is strictly prohibited.
10. Workshops are closed from 11;30 am - 1;00 pm from Monday to Friday.
11. Proper use of designated parking areas and no parking shall be strictly observed.
12. Propered haircut shall be enforced.
13. Wearing of earnings and pierce are not allowed for male trainee.
14. Bringing of tools equipment inside the center shall be log in and out by security guard for
monitoring purpose.
15. Observe silence at all time in the training center premises.
BASIC COMPETENCIES
18 Hours
Complete relevant
work related
documents
Participate in
workplace meeting and
discussion
NOTES:
Unit of Competency: 2. Work in a team environment
Describe work as a
team member
NOTES:
Unit of Competency: 3. Practice career professionalism
Integrate personal
objectives with
organizational goals
Maintain professional
growth and
development.
NOTES:
Unit of Competency: 4. Practice occupational health and safety
Maintain occupational
health and safety
awareness
NOTES:
E I M NC II COMMON COMPETENCIES
(24 Hours)
NOTES:
Unit of Competency: 2. Perform Mensuration and Calculation
Select measuring
instruments
Carry out
measurements and
calculation
Maintain measuring
instruments
NOTES:
Unit of Competency: 3. Prepare and Interpret Technical Drawing
Identify different
kinds of technical
drawings
Interpret technical
drawing
Prepare/ make
changes to electrical/
electronic
schematics and
drawings
Store technical
drawings and
equipment/
instruments
NOTES:
Unit of Competency: 5. Apply Quality Standards
Assess quality of
received materials or
components
Engage in quality
improvement
NOTES:
Unit of Competency: 5. Terminate and Connect Electrical Wiring and Electronic
Circuits
Terminate/ connect
electrical wiring/
electronic circuits
Test termination/
connections of
electrical wiring/
electronics circuits
NOTES:
CORE COMPETENCIES
(154 Hours)
Install electrical
metallic /non- metallic
(PVC conduit)- 16hrs
Install auxiliary
terminal cabinet and
distribution panel-
12hrs
Notify completion of
work- 4hrs
NOTES:
Unit of Competency: 2. Install electrical protective devices for distribution,
power, lighting, auxiliary, lightning protection and grounding
systems
Install electrical
protective devices -
16hrs
Notify completion of
work -4hrs
NOTES:
Unit of Competency: 3. Install wiring devices of floor and wall mounted outlets,
lighting fixtures/switches, and auxiliary outlets
Install lighting
fixtures/switches-
16hrs
Notify completion of
work -4hrs
NOTES: