Professional Documents
Culture Documents
IFlow Hydraulic Calculations Guide
IFlow Hydraulic Calculations Guide
Hydraulic Flow
Calculation
Software
BKR-1605b
Preparation
Correct
Section 3 - 4
Section 4 - 301
Error
Section 3 - 301
2 3
1 2 1
2 2
1 1
4 5 6 7
4 3 2 1
1
iFlow (UL/FM) 300 bar Inergen - Hydraulic Software 15
Node Numbers
4 5 6 7
No. of Hose /
Section Fitting
3 Cont. Pipe
1-2 1 H
2-3 2 H
3-4 3 H
2 4-5 3 P 370 90° L
5-6 6 P 370 Thru T
6-7 8 P 370 Thru T
4 3 2 1
1
iFlow (UL/FM) 300 bar Inergen - Hydraulic Software 16
Node Numbers
4 5 6 7 8 9 10
4 5 6 7 8 9 10
No. of Hose /
Section Fitting
Cont. Pipe
1-2 1 H
3 2-3 2 H
3-4 3 H
4-5 3 P 370 90° L
2 5-6 6 P 370 Thru T
6-7 9 P 370 Thru T
7-8 12 P 370 Thru T
8-9 15 P 370 Thru T
1 9-10 18 P 370 Thru T
4 5
3 No. of Hose /
Section Fitting
Cont. Pipe
1-2 1 H
2 2-3 2 H
3-4 3 H
4-5 18 P 1750
10
9
5 3 2
1
4
iFlow (UL/FM) 300 bar Inergen - Hydraulic Software 20
Node Numbers
Hydraulic Options
-Confirm basic data from estimator phase
Nozzle Configuration
-Assign nozzles to hazards / volumes
-Assign agent quantity / orifice diameters
Pipe Data
-Input and review pipe sections
Results
-Review results of hydraulic calculation
-Generate report
Fixed Nozzle
= pipe and nozzle details must
be known, software checks
hydraulic only (existing
system)
Help functionality:
Re-Number Nozzles
-Re-numbers all nozzles starting at 301 from Ceiling Void -> Room -> Floor Void
Re-Generate Nozzles:
-Generates nozzles with agent quantities based on estimator parameters again
-WARNING: Overwrites any changed data
Helper functionality: List all nozzles, their locations, and whether or not they
have been assigned in the Pipe Data table
Helper functionality: Duplicate pipe data from another Run in the same project
WARNING: Overwrites current pipe data
Convert to Fixed Nozzle: Store resulting pipe sizes, schedules, orifice diameters
in current hydraulic run.
Create Fixed Nozzle Run: “Save As”, stores resulting pipe sizes, schedules, orifice
diameters in a new copy of the current hydraulic run.