Professional Documents
Culture Documents
CSSD Equip
CSSD Equip
CSSD Equip
CSSD
General Requirements
Manfacturer Supplier
Model No. Origin
Delivery Period Warranty
Utility Requirements
Environmental Req.
IT_Integration requirement
Unit Price Total Price
Specifications
Bidders
No Specifications corresponding Bidder
technical Comments
specification
1 Compact and lightweight table top model.
3
Protected against overheating
4
LCD display of sealing status
5
The package heat sealer shall have a spring-loaded hinge to open and
close the jaws
6
Heating time approximately 10 seconds or less
7
Counter records total number of seals performed
8
Accepts a wide range of bag sizes, Auto pack, and dust cover pouches; up
to 18 inches with a 1/2 inch seal.
9
Visual alarm to notify the operator when the bag has been sufficiently
sealed and the heating element has been cooled
10
Sealing width of heating element approximately 15 mm
11
The temperature range from 100 to 200 C
12
Feeder speed not less than 8 m/minute.
13
Accessories: Roll Holder and cutter
14
Optional: Barcode Reader attachment
Masharif Hospital
Item Description SET, STEAM GUN
Category CSSD
Item Code ST18010
Item Qty 2
General Requirements
Manfacturer Supplier
Model No. Origin
Delivery Period Warranty
Utility Requirements
Environmental Req.
IT_Integration requirement
Unit Price Total Price
Specifications
Bidders
No Specifications corresponding Bidder
technical Comments
specification
1 A stationary, wall-mounted cleaning unit for manual washes of trolleys or
other movable equipment
7 Non-return valve unit and a main shut-off valve are included in the supply
Hose frame to be included
General Requirements
Manfacturer Supplier
Model No. Origin
Delivery Period Warranty
Utility Requirements
Environmental Req.
IT_Integration requirement
Unit Price Total Price
Specifications
Bidders
No Specifications corresponding Bidder
technical Comments
specification
1 Bench top of stainless steel, floor stand of stainless steel including
stainless steel under shelf.
General Requirements
Manfacturer Supplier
Model No. Origin
Delivery Period Warranty
Utility Requirements
Environmental Req.
IT_Integration requirement
Unit Price Total Price
Specifications
Bidders
No Specifications corresponding Bidder
technical Comments
specification
1 Low temp sterilizer that provides an efficient sterilization solution for
heat & moisture sensitive equipment in CSSD.
9 LCD display of cycle parameters & error status (preferably full message)
11 Alarms (Audible & Visual) for power failure, wet cycle and leakage
General Requirements
Manfacturer Supplier
Model No. Origin
Delivery Period Warranty
Utility Requirements
Environmental Req.
IT_Integration requirement
Unit Price Total Price
Specifications
Bidders
No Specifications corresponding Bidder
technical Comments
specification
1 Double door sterilizer for the sterilization of wrapped and unwrapped
porous and non-porous instruments and supplies in the CSSD
2
Sterilizer vessel:
2.1 Chamber, jacket and door are constructed form solid, high quality type
316L or 316 Ti stainless steel
2.9 Control panel: LCD display with FULL messaging of status of cycles, date,
operator, alarms etc. the largest the best
3
Cycles:
3.7 Power System Failure backup until the end of the Cycle
4
Door:
5
Air Filter:
5.3
Thermal printer for cycle documentation
5.4
Pipes, valves
5.5
It is preferable if the material of the pipes & valves in the sterilizer to
receive building supplied steam are constructed from copper
6
Steam Source:
6.1 The primary steam supply is from the central steam supply, however, in
case of the central steam supply is out, then the proposed unit shall
operate on back up built-in steam generator
7 Accessories required: 2 original loading trolleys, 2 original carriage
trolleys, Chemical and biological indicators, Sterilization baskets…
8
Internal battery backup for all cycle memory
9
The supplier/contractor shall submit the list of standards (BS or EN) to
which the sterilizer is designed and constructed and a statement of
compliance.
10 The unit shall include all accessories for full functionality
General Requirements
Manfacturer Supplier
Model No. Origin
Delivery Period Warranty
Utility Requirements
Environmental Req.
IT_Integration requirement
Unit Price Total Price
Specifications
Bidders
No Specifications corresponding Bidder
technical Comments
specification
1 Single door sterilizer for the sterilization of wrapped and unwrapped
porous and non-porous instruments and supplies in the CSSD
2
Sterilizer vessel:
2.1 Chamber, jacket and door are constructed form solid, high quality type
316L or 316 Ti stainless steel
2.9 Control panel: LCD display with FULL messaging of status of cycles, date,
operator, alarms etc. the largest the best
3
Cycles:
3.7 Power System Failure backup until the end of the Cycle
4
Door:
5
Air Filter:
5.1 The supplier/contractor shall specify the filter separation efficiency
5.2 The supplier shall specify the frequency of replacement based on number
of cycles
5.3
Thermal printer for cycle documentation
5.4
Pipes, valves
5.5
It is preferable if the material of the pipes & valves in the sterilizer to
receive building supplied steam are constructed from copper
6
Steam Source:
6.1 The primary steam supply is from the central steam supply, however, in
case of the central steam supply is out, then the proposed unit shall
operate on back up built-in steam generator
7 Accessories required: 1 original loading trolleys, 2 original carriage
trolleys, Chemical and biological indicators, Sterilization baskets…
8
Internal battery backup for all cycle memory
9
The supplier/contractor shall submit the list of standards (BS or EN) to
which the sterilizer is designed and constructed and a statement of
compliance.
10 The unit shall include all accessories for full functionality
General Requirements
Manfacturer Supplier
Model No. Origin
Delivery Period Warranty
Utility Requirements
Environmental Req.
IT_Integration requirement
Unit Price Total Price
Specifications
Bidders
No Specifications corresponding Bidder
technical Comments
specification
1
Used for sorting, wrapping and preparation of items for sterilizations in
the CSSD department
2
Constructed of stainless steel 316L or 304 stainless
3 Chamber, jacket and door are constructed form solid, high quality type
316L or 316 Ti stainless steel
4
Adjustable legs
5
Shelf to wrap supplies
6
Dimensions (HxWxL) mm: approximately 900x2000x600
Masharif Hospital
Item Description TABLE, WORK SMALL, 1200 x 600 mm
Category CSSD
Item Code ST16041
Item Qty 1
General Requirements
Manfacturer Supplier
Model No. Origin
Delivery Period Warranty
Utility Requirements
Environmental Req.
IT_Integration requirement
Unit Price Total Price
Specifications
Bidders
No Specifications corresponding Bidder
technical Comments
specification
1
Used for sorting, wrapping and preparation of items for sterilizations in
the CSSD department
2
Constructed of stainless steel 316L or 304 stainless
3 Chamber, jacket and door are constructed form solid, high quality type
316L or 316 Ti stainless steel
4
Adjustable legs
5
Shelf to wrap supplies
6
Dimensions (HxWxL) mm: approximately 900x1200x600
Masharif Hospital
Item Description ULTRASONIC CLEANER
Category CSSD
Item Code ST20227
Item Qty 1
General Requirements
Manfacturer Supplier
Model No. Origin
Delivery Period Warranty
Utility Requirements
Environmental Req.
IT_Integration requirement
Unit Price Total Price
Specifications
Bidders
No Specifications corresponding Bidder
technical Comments
specification
1 Floor- Unsurpassed ultrasonic energy, Plus detergent cleaning for
instruments and other hard goods.
2
Hands –free, toe switch operation via a powered load-tray elevator
3 The toe switch opens and closes the lid and begins the cleaning process
4
Automated water fill, Programmable controls, detergent injection,
solution heating and cycle timing
5
Push button for drain
6
Liquid level sensor and overflow protection
7
Automatic detergent dosing and low detergent indicator
8
Digital display for time, real temperature, set temp
9
Audible & visual alarms
10
Capacity: approximately 60 Liter
11 The unit shall include all accessories for full functionality
12 The unit shall be CE marked and/or FDA approved
Masharif Hospital
Item Description WASHER / DECONTAMINATOR, 185 LITER, DD
Category CSSD
Item Code ST17041
Item Qty 1
General Requirements
Manfacturer Supplier
Model No. Origin
Delivery Period Warranty
Utility Requirements
Environmental Req.
IT_Integration requirement
Unit Price Total Price
Specifications
Bidders
No Specifications corresponding Bidder
technical Comments
specification
1 Washer/decontamination units shall be used in the CSSD department to
clean surgical instruments, rigid tubular instruments, anesthesia materials
& laboratory glassware
2 Microprocessor controlled
5 Phases of each cycle: pre-wash, wash, rinse and thermal rinse, all as
standard
6 Drying capabilities
9 Descaling cycle for removal of scale and other hard water deposits from
chamber and re-circulating piping