Professional Documents
Culture Documents
140H DAKYFA Final Drive and Tandem Drive SYST OPER
140H DAKYFA Final Drive and Tandem Drive SYST OPER
Page 1 of 5
Shutdown SIS
Previous Screen
Systems Operation
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Media Number -SENR9159-09Publication Date -01/04/2008Date Updated -20/12/2016
i01667561
S/N - 1AL1-UP
S/N - 2AN104-UP
S/N - 2FM1-UP
S/N - 2GS1-UP
S/N - 2HS1-UP
S/N - 2LR1-294
S/N - 2WR1-UP
S/N - 2ZK1-UP
S/N - 3AS1-UP
S/N - 3GM1-UP
S/N - 3YK1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/si... 6/1/2023
140H NA Motor Grader 2ZK00001-UP (MACHINE) POWERED BY 330... Page 2 of 5
S/N - 4ER1-UP
S/N - 4MK1-UP
S/N - 4XM1-UP
S/N - 5AK1-UP
S/N - 5FM1-UP
S/N - 5HM1-UP
S/N - 5ZM1-UP
S/N - 6NM1-254
S/N - 6TM1-UP
S/N - 6WM1-340
S/N - 6YN1-UP
S/N - 7MM1-UP
S/N - 8JM1-UP
S/N - 8KM1-393
S/N - 8MN1-UP
S/N - 8WN1-UP
S/N - 9EJ1-UP
S/N - 9JM1-UP
S/N - 9TN1-UP
S/N - 9YR1-UP
S/N - 9ZN1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/si... 6/1/2023
140H NA Motor Grader 2ZK00001-UP (MACHINE) POWERED BY 330... Page 3 of 5
S/N - BDJ1-UP
S/N - XZH1-UP
S/N - XZJ1-UP
S/N - XZK1-UP
Illustration 1 g00108052
Typical Example of a Final Drive
(1) Sun gear and shaft
(2) Carrier
(3) Ring gear
(4) O-ring seal
(5) Final drive housing
(6) Lip type seal
(7) Washer
(8) Wear ring
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/si... 6/1/2023
140H NA Motor Grader 2ZK00001-UP (MACHINE) POWERED BY 330... Page 4 of 5
The final drive is a planetary gear system that increases the torque to the wheels. The
final drive also transfers torque to the wheels. Each wheel is driven by a chain (17) that
connects final drive sprocket (10) on each wheel spindle (18). The final drive also
provides the pivot point for each tandem wheel.
The differential drives the sun gear and shaft (1). Planet gear (14) is driven by the sun
gear. Planet gear (14) rotates on the inside of ring gear (3). Planet gear (14) drives
carrier (2). Carrier (2) is splined to output shaft (11).
Illustration 2 g00853438
Typical Example of Tandem Housing
(16) Tandem housing
(17) Chain
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/si... 6/1/2023
140H NA Motor Grader 2ZK00001-UP (MACHINE) POWERED BY 330... Page 5 of 5
Two sprockets (10) are splined onto each output shaft (11) of the final drive. These
sprockets (10) are in the center of the tandem drive between the wheels. Chain (17) that
is between the center and wheel sprockets (20) drives each wheel on the tandem drive.
Wheel spindle (18) is splined to wheel sprocket (20). Wheel sprocket (20) turns wheel
spindle (18).
Tandem housing (16) is connected with bolts to the pivot housing (12). Pivot housing
(12) allows the wheels to oscillate tandem housing (16). Two wear rings (8), washers
(7) and two seals are between final drive housing (5) and pivot housing (12).
Wheel spindle housings (19) also contain the components for the service brakes. The
brake components are lubricated and cooled by the oil in the tandem housing. This oil
is circulated by the movement of the wheels. The plug at the bottom of the brake
housing can be used for checking the wear to brake components.
Copyright 1993 - 2023 Caterpillar Inc. Thu Jun 1 06:43:31 UTC+0300 2023
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/si... 6/1/2023