Professional Documents
Culture Documents
Inching Pedal Module Test
Inching Pedal Module Test
The purpose of this test is to measure voltage output from the inching pedal module (S07). For more information, see
Transmission Control Unit (TCU) Circuit Theory of Operation . (Group 9015-15.)
Do not remove inching pedal module from pedal assembly. Removing and installing inching pedal module to
pedal assembly will damage inching pedal module.
NOTE:
For inching pedal module pin identification, see Cab Interior Harness (W15) Wiring Diagram—6WD or
see Cab Interior Harness (W16) Wiring Diagram—Non 6WD . (Group 9015-10.)
Action:
With ignition OFF, disconnect inching pedal module (S07) from harness. See Cab Interior Harness (W15) Component
Location—6WD or see Cab Interior Harness (W16) Component Location—Non 6WD . (Group 9015-10.)
NOTE:
Using JDG10456 and JDG10457 Flex Probes and a jumper wire, connect power from pin B on inching pedal module
harness to pin B on inching pedal module.
Connect ground from pin F on inching pedal module harness to pin F on inching pedal module.
With ignition ON, measure voltage at pin A with inching pedal in idle position (not pushed).
Measure voltage at pin A with inching pedal fully depressed. Compare to specification.
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM12135_09001faa816ae898.ht... 12/06/2024
Page 2 of 3
Measure voltage at pin C with inching pedal in idle position (not pushed).
Measure voltage at pin C with inching pedal fully depressed. Compare to specification.
Result:
Action:
With ignition OFF, disconnect inching pedal module (S07) from harness. See Cab Interior Harness (W15) Component
Location—6WD or see Cab Interior Harness (W16) Component Location—Non 6WD . (Group 9015-10.)
Using JDG10456 and JDG10457 Flex Probes and a jumper wire, connect power from pin D on inching pedal module
harness to pin D on inching pedal module.
Connect ground from pin F on inching pedal module harness to pin F on inching pedal module.
NOTE:
With ignition ON, measure voltage at pin E with inching pedal in neutral position (not depressed).
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM12135_09001faa816ae898.ht... 12/06/2024
Page 3 of 3
Result:
MH66088,0000E1C-19-20121002
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM12135_09001faa816ae898.ht... 12/06/2024