Professional Documents
Culture Documents
Bridle PM1
Bridle PM1
Bridle PM1
1. Tool washing
2. Thread servicing & O-Ring
3. Visual inspection
4. Electrical Check
Note:-
1. use proper probes with DITS male/female pins for Electrical check.
2. Female pin cleaning must be done under supervision of maintenance.
3.Take new PM1 sheet from share point only, do not take xerox or from any laptop/PC.
4. Check Cap at top connector, remove moisture from caps before putting on tool
5.Do not use same PM1 sheet for different serial no tools
6.Use only Liquid -O-ring grease (P/N-LOR101) for thread servicing
PM1 Details
10721451
13/06/2024
PM1 done by (please put the name person (s) who is actually doing the
PM1)
*
Sudipta, ankur
Tool Washing
Yes
No
Elaborate if any Anomaly observed while doing the PM1 in this Section
Thread Servicing
Yes
No
Elaborate if any Anomaly observed while doing the PM1 in this Section
Visual Inspection
Yes
No
Elaborate if any Anomaly observed while doing the PM1 in this Section
Pin Configuration
10
Instructions:
• Only use Simpson 260 VOM to check the tool.
• Zero the meter before making the resistance checks.
YES
NO
Electrical Check
11
Anomaly
12
Elaborate if any Anomaly observed while doing the PM1 in this Section
13
Open
Anomaly
14
Elaborate if any Anomaly observed while doing the PM1 in this Section
Open
Anomaly
16
Elaborate if any Anomaly observed while doing the PM1 in this Section
17
Open
Anomaly
18
Elaborate if any Anomaly observed while doing the PM1 in this Section
This content is created by the owner of the form. The data you submit will be sent to the form owner. Microsoft is
not responsible for the privacy or security practices of its customers, including those of this form owner. Never give
out your password.
Microsoft Forms | AI-Powered surveys, quizzes and polls Create my own form
The owner of this form has not provided a privacy statement as to how they will use your response data. Do not
provide personal or sensitive information. | Terms of use