Professional Documents
Culture Documents
Jergens True-Lok™ Toggle Clamps - Catalog
Jergens True-Lok™ Toggle Clamps - Catalog
Jergens True-Lok™ Toggle Clamps - Catalog
Toggle Clamps
Introduction .......................................................................2
Types of Toggle Clamps ...................................................3
Hold Down Vertical ..................................................... 4-13
Hold Down Horizontal .............................................. 14-19
Pull Action Latch ....................................................... 20-26
Straight Line Action ..................................................27-31
Additional Lock Mechanism ......................................... 32
Hold Down Vertical ........................................................ 33
Hold Down Horizontal ............................................. 34-36
Pull Action Latch ....................................................... 37-40
Straight Line Action ..................................................41-42
Spindles and Accessories ........................................ 43-44
Product Code Index ....................................................... 45
TOGGLE CL AMPS
Introduction
What is a Toggle Clamp? — Handle
A toggle clamp is a simple mechanism which holds instantly. Toggle
clamps consist of a handle to operate, a clamping arm to reach the
work piece, linkages for multiplying the applied force, and a base for
mounting. When the handle is moved by the operator it generates
movement in the clamping arm to hold the work piece. A required
clamping force is achieved and exerted on the work piece. Under this
action the toggle clamp holds the work piece firmly and positively.
Clamping Force:
Clamping force, the amount of force actually applied to the work
piece by closing and locking the clamp, is generally less than the
stated holding capacity. Actual clamping force depends on many
factors including spindle position, proper spindle height adjustment,
spindle cushioning, work piece material and the clamps mechanical
advantage. In most cases, roughly one third of the stated holding
capacity can be applied by hand with medium effort.
Toggle Principle:
Toggle action clamps operate through a linkage system of levers and pivots. The fixed length
levers, connected by pivot pins supply the action and clamping force. Toggle action has an
over center lock point which is a fixed stop and linkage. Once in the over center position, the
clamp cannot move or unlock unless the linkage is moved. All types of toggle clamps have
the same action, just oriented differently.
The Toggle Mechanism in a clamp has three functions.
1) To multiply applied load at the handle into a high clamping force to hold the work piece.
2) To create an over - center lock to prevent the clamp from opening and releasing the work
piece until opened by the operator.
3) To rapidly open and close the clamp giving a maximum clearance in which to load and
unload the work piece.
TOGGLE CL AMPS
The clamping arm can be solid bar, U-shaped or fixed hole type.
1.00
1.00 1.00
1.30
.63
TOGGLE CL AMPS
1.00
1.00
.62 M5
Ø.18
2.00 3.10
.72
.63
1.00
.63
1.00
M5
.73 2.00
3.30
1.30
.88
M5
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
3.30
70001 Straight Adjustable U-Bar 60° 110° 112 lbs (0.5 kN)* 0.2 lbs (0.09 kg)
1.30
*applies to U-Bar position closest to handle
.88
1.00
.50
M6
4.36
1.07
1.06 1.53
1.77
.93
Ø.22
1.00
.50
1.30
1.06
2.30
1.06 1.53
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
70002 Flanged Solid 64° 104° 140 lbs (0.62 kN) 0.33 lbs (0.15 kg)
Ø.22
M6
4.36
1.77
.93
TOGGLE CL AMPS
1.00
1.30
.50
2.30
1.06 M6 4.36
1.06 1.53
1.77
.94
Ø.22
1.78
2.78
.50 Ø.22
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
.99
70003 Flanged Adjustable U-Bar 64° 104° 225 lbs (1.00 kN)* 0.35 lbs (0.16 kg)
1.06
1.77
.94
1.06
2.12
.92
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
70055-SS Flanged Adjustable U-Bar 64° 104° 225 lbs (1.00 kN)* 0.35 lbs (0.16 kg)
M6
4.36
*applies to U-Bar position closest to handle
2.12
Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergensinc.com | www.jergensinc.com
.92 5
TOGGLE CLAMPS
WORKHOLDING
1.06 SOLUTIONS GROUP
M6
4.55
1.06
1.77
1.14
.50 Ø.22
1.78 1.00 .25
2.75
.50 Ø.22
1.78 1.00 .25
2.75 M6
4.55
1.07
1.77
1.14
1.14
1.81
3.00
T-Handle 2.60
1.25 1.75
1.38
.75 M8 6.10
Ø.28
3.09
1.25 1.75
2.16
1.25
4.00
5.50
5.82 1.38
.75 Ø.28
1.86
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
1.25 1.75
70006 Flanged Adjustable Long U-Bar
M8
62° 115°
6.10 337 lbs (1.50 kN)* 0.75 lbs (0.34 kg)
*applies to U-Bar position closest to handle
2.16
1.25
4.00
5.50
TOGGLE CL AMPS
5.82
1.38
.75 Ø.28
1.86 M8 6.10
1.25 1.75
2.16
1.25
2.73
4.45
1.38
Part Number Base Arm Handle Moves Bar Opens Holding Capacity
1.86
.75 Weight
Ø.28
70007 Flanged Adjustable U-Bar 62° 115° 382 lbs (1.70 kN)* 0.66 lbs (0.30 kg)
1.25 1.75
M8 6.10
*applies to U-Bar position closest to handle
2.16
1.25
2.73
4.45 1.38
.75 Ø.28 M8
1.86 6.10
1.25 1.75
2.77
1.25
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
70007-SS Flanged Adjustable U-BarM8 62° 115° 382 lbs (1.70 kN)* 0.66 lbs (0.30 kg)
6.10
*applies to U-Bar position closest to handle
2.77
Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergensinc.com | www.jergensinc.com
1.25 7
TOGGLE CLAMPS
WORKHOLDING SOLUTIONS GROUP
1.86
M8 6.30
1.86
2.16
1.55
.75 Ø.28
2.66 1.38 .23
4.37
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
.75 Ø.28
70008 Straight Adjustable U-Bar 62° 115° 382 lbs (1.70 kN)* 0.66 lbs (0.30 kg)
M8 6.30
1.86
*applies to U-Bar position closest to handle 1.25 1.75
2.16
1.55
.75 Ø.28
TOGGLE CL AMPS
3.14
2.66 1.38 .23
4.37
M8
.75 Ø.28
4.48
1.86
2.16
1.25 1.75
1.25
2.66 1.38
T-Handle 3.14
4.37
1.38
Part Number Base Arm Handle Moves Bar Opens Holding Capacity .75 Weight
M8 Ø.28
70009 Flanged Adjustable U-Bar 62°
4.48 115° 382 lbs (1.70 kN)* 0.66 lbs (0.30 kg)
1.25 1.75
*applies to U-Bar position closest2.16
to handle .24
1.25
2.66 1.38
4.37
1.38
.75 M8 6.10
Ø.28
2.22
3.60
3.75
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
70010 Flanged Solid 62° 115° 472 lbs (2.10 kN)* 0.70 lbs (0.315 kg)
6.10
*applies to U-Bar position closest
M8 to handle
2.16
Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA
8
1.25
TOGGLE CLAMPS
WORKHOLDING SOLUTIONS GROUP
M8
6.30
2.55
1.81
Part Number Base Arm Handle Moves Bar Opens Holding Capacity .75 Weight
Ø.32
M8
70122 Straight Solid 62° 6.30
115° 472 lbs (2.10 kN)* 0.66 1.25
lbs (0.30 kg)
*applies to U-Bar position closest to handle 2.55
.24
1.81
TOGGLE CL AMPS
2.21 1.38
3.88
.75 Ø.32
M8 6.10
1.25
.24
2.16
1.25
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
70123 Flanged M8 Solid 62° 6.10
115° 450 lbs 1.37
(2.00
.63
kN)*
Ø.27
0.75 lbs (0.34 kg)
2.00
*applies to U-Bar position closest to handle
1.00 1.50
2.16
1.25
M8
3.48 1.38 1.75
5.15
2.55
1.37
.63 Ø.27
2.00
2.67
1.00 1.50
5.50
M8 2.52
2.55 6.00
Part Number Base 2.67 Arm Handle Moves Bar Opens Holding Capacity Weight
70017 Flanged Adjustable U-Bar 60° 5.50 185° 382 lbs (1.70 kN)* 0.80 lbs (0.36 kg)
*applies to U-Bar position closest to handle2.52
1.78 2.54
3/8-16 THD
1.91 7.77
1.25 Ø.33
2.43
3.50
1.78 2.54
1.66
3.55
5.50
5.69
1.91
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
1.25
Ø.33
70011 Flanged Adjustable U-Bar 58° 106° 600 lbs (2.70 kN)* 1.30 lbs (0.59 kg)
3/8-16 THD 1.78 2.54
*applies to U-Bar position closest to handle 7.77
.31
3.50
1.66
TOGGLE CL AMPS
3.55
5.50
5.69
1.91 3/8-16 THD
1.25 7.77
Ø.33
3.50
1.78 2.54
.31 1.67
3.49
5.40
5.62
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
70012 Flanged
3/8-16 THD Solid 58° 106° 760 lbs (3.40 kN)* 1.30 lbs (0.59 kg)
7.77
*applies to arm position closest to handle
.31
3.50
1.67
3.49
5.40
5.62
3/8-16 THD
8.34
3.50
.31
2.22
1.25 Ø.33
3.49 1.91 .31
5.62
3/8-16 THD
Part Number Base Arm Handle Moves Bar8.34Opens Holding Capacity Weight
70013 Straight Solid
3.50
58° 106° 760 lbs (3.40 kN)* 1.30 lbs (0.59 kg)
*applies to arm position closest to handle
2.22
Ø.33
2.30
Hold Down Vertical 1.77 2.55
5.34
1.91
1.26
3/8-16 THD
Ø.33
5.34
2.30
1.77 2.55 3.50
1.67
3.55
5.68
5.34
T-Handle
3/8-16 THD
Part Number Base Arm Handle Moves Bar Opens Holding Capacity
1.25 Ø.34 Weight
5.34 2.81
70125 Flanged3.50 Adjustable U-Bar 58° 106° 600 lbs (2.70 kN)* 1.30 lbs (0.59 kg)
1.78
*applies to U-Bar position closest
1.67to handle
3.55
5.68
TOGGLE CL AMPS
1.25 Ø.34 1/2-13 THD
2.81 8.78
1.78
3.31
2.00
1.78
*applies to U-Bar position closest to handle .39
3.31
2.00
1.25 Ø.34
1/2-13 THD
8.59
1.78
.39
3.31
1/2-13 THD
8.98
2.81
3.31
2.40
Part Number Base Arm 1/2-13 THD Handle Moves Bar Opens Holding Capacity Weight
8.98 2.00
70135 Straight Adjustable U-Bar 75° 136° 990 lbs4.25(4.40 kN)* 2.43 lbs (1.10 kg)
2.35 2.76
*applies to U-Bar position closest to handle 3.31
2.40
Ø.49
6.93
2.00 M16
4.25
12.90
2.35 2.76
6.70
Ø.49
3.22
Part Number Base Arm Handle Moves Bar Opens Holding Capacity 2.00 Weight
M16
Ø.48
12.90
70016 Flanged Adjustable U-Bar 70° 140° 1200 lbs (5.40 kN)* 4.90 lbs (2.20 kg)
2.75
*applies to U-Bar position closest to handle
6.70
3.22
M16
2.00 Ø.48
11.93
2.75
6.70
3.19
Part Number Base M16 Arm Handle Moves Bar Opens Holding Capacity Weight
70053 Flanged Solid 70° 11.93 140° 1200 lbs (5.40 kN)* 4.41 lbs (2.00 kg)
*applies to arm position closest to handle
6.70
Jergens,3.19
Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA
12
TOGGLE CLAMPS
WORKHOLDING SOLUTIONS GROUP
2.00 Ø.48
2.75
11.93
2.75
6.70
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
M16
11.93
70053-SS Flanged Solid 70° 140° 1200 lbs (5.40 kN)* 4.41 lbs (2.00 kg)
*applies to arm position closest6.70
to handle
TOGGLE CL AMPS
8.84
.39 .94
.63 M4
.44 Ø.17
.78
.73
.62 .92 .35
.88
.39 .94 2.70
M4
.39 .94
TOGGLE CL AMPS
.63 M4
.44 Ø.17
.78
.73
.62 .92 .35
.88
.39 .94 2.70
Stainless Steel
M4
.70 .94
.63 M4
.44 .17
.78
.73
.62 .92 .42
1.83
.70 .94 2.79
M4
.70 .94
.63 M4
.44 .17
.78
.73
.62 .92 .42
1.83
.70 .94 2.79
Stainless Steel
M4
Part Number Base Arm Handle Moves Bar Opens Holding Capacity
1.03
Weight
.78 .50 .53 Ø.18
.73
70019-SS Flanged .42 Solid 60° 85° 67 lbs (0.30 kN) 0.07 lbs (0.03 kg)
2.79
TOGGLE CL AMPS
1.20
1.03 M5
.50 .53 Ø.18
1.50
1.30
.62 1.03
.49
1.18
2.29
T-Handle 1.20
M5
Part Number Base Arm Handle Moves Bar Opens Holding Capacity
1.03
Weight
1.50
70026 Flanged
1.30 Adjustable U-Bar 175° 92° 112.50lbs (0.50.53kN)* 0.15
Ø.18 lbs (0.07 kg)
.49
*applies to U-Bar position closest to handle
.62 1.03
1.18
2.29
1.20
M5
1.03
.50 .53 Ø.18
1.50
1.30
.62 1.03 .49
1.18
T-Handle 2.29
Stainless Steel M5
1.20
Ø.17
M5
.53
.90
1.30 1.39
.69 .75 .77
1.30 1.39
.77
.53
.90
.69 .75
TOGGLE CL AMPS
Ø.17
M5
.53
.90
Stainless
1.30 Steel 1.39
.77
Part Number Base Arm 1.56 1.00 Handle Moves Bar Opens
1.10 Holding Capacity Weight
4.31
70141 Flanged Adjustable U-Bar 60° 90° 160 lbs (0.70 kN)* 1.060.15 lbs (0.07 kg)
*applies to U-Bar position closest to handle 1.30
1.00
.88 1.38
Ø.20 1.39
M6
1.06
1.00
1.30
1.77
1.47
.88 1.38 .98
1.77
1.47
.98
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
2.45
70020 Flanged Adjustable U-Bar 5.90 70° 90° 225 lbs (1.00 kN)* 0.33 lbs (0.15 kg)
*applies to U-Bar position closest to handle
M6
1.30 1.77
1.78
1.30
Ø.20
1.00 .20
1.06
2.45 1.39
M6
5.90
1.77
1.78
Part Number Base Arm
1.30
Handle Moves
Ø.20 Bar Opens Holding Capacity Weight
1.72
70021 Straight Adjustable U-Bar 1.0070° 90° 225
.20 lbs (1.00 kN)* 0.33
.91 Ø.28 lbs (0.15 kg)
1.06
*applies to U-Bar position closest to handle 2.45 1.39 .75
5.90
1.15 1.82
TOGGLE CL AMPS
1.72 M8 2.00
.91 Ø.28
.75
.92
1.76
3.65
T-Handle M8 2.00
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
2.55 2.55
70027 Flanged Adjustable U-Bar 92° 175° 310 lbs (1.40 kN)* 0.55 lbs (0.25 kg)
.92
*applies to U-Bar position closest to handle 1.50
1.76 1.00 Ø.27
1.30
3.65
.88 1.38
M8
1.50
1.00 Ø.27
1.30 2.16
1.84
.88 1.38 1.30
2.87
M8 6.95
2.16
Part Number Base 1.30Arm Handle Moves Bar Opens
1.84 Holding Capacity Weight
70022 Flanged Adjustable U-Bar 70° 90° 500 lbs (2.20 kN)* 0.57 lbs (0.26 kg)
2.87
*applies to U-Bar position closest to handle 6.95
1.50
.88 1.38
M8
1.50
1.00 Ø.27
1.30
2.77
.88 1.38 1.84
1.30
M8 2.87
6.95
Stainless Steel
2.77
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
1.84
1.30
1.30
8
M8
TOGGLE CL AMPS
2.55
1.30
2.15
1.57
8
M8 1.00 Ø.27 .24
2.90 1.50
6.95
2.55
2.15
1.57
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
1.00 Ø.27 .24
70023 Straight Adjustable U-Bar2.90 70°
1.50 90° 500 lbs (2.20 kN)* 0.57 lbs (0.26 kg)
6.95
*applies to U-Bar position closest to handle
2.25
1.63 Ø.33
2.37
1.63 2.25
2.25 3/8-16
1.63 Ø.33
2.37
3/8-16 4.30
9.73
3.50
2.55
1.70
Part Number Base Arm 4.30 Handle Moves Bar Opens Holding Capacity Weight
9.73
70024 Flanged Adjustable U-Bar 63° 92° 760 lbs (3.40 kN)* 1.65 lbs (0.75 kg)
*applies to U-Bar position closest to handle
3/8-16
2.37 3.50
2.96
2.11
3.50
2.96
2.11
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
1.63 Ø.33 .31 2.50
70025 Straight Adjustable U-Bar 4.30
63°
9.76
2.25
92° 760 lbs (3.40 kN)* .311.65 lbs (0.75 kg)
1.54
1.22
1.50 2.47
TOGGLE CL AMPS
3.00
2.50 3/8-16 THD
1.54
1.22 .31
1.50
3.55
1.50 2.47 3.50
1.32
2.70
3.00 5.20
3/8-16 THD
T-Handle
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
3.55
3.50
70028 Flanged Adjustable U-Bar 160° 88° 760 lbs (3.40 kN)* 1.32 lbs (0.60 kg)
1.32
.16
Ø.17
4.00
.16 2.24
Ø.17
1.28
.75 .53 .75 1.10 .46
.79 1.02
.39 .63 Ø.17
.79 1.81 MIN
2.25 MAX
4.00
2.24
4.00
.16
Ø.17 2.24
1.28
.75 .53 .75 1.10
.46
4.00
1.28
.46
Ø.19 1.23
6.80
Ø.19 1.23
3.26
.20
1.00 .75 1.30 1.77 2.15
.55
Ø.27 .56 .75 Ø.27 1.00 1.38
2.40 MIN
3.50 MAX
6.80
3.26
.20
2.15
.55
1.00 1.38
2.40 MIN
Part Number Drawing Movement 3.50 MAX Holding Capacity Weight
70030 1.73 in 560 lbs (2.50 kN) 0.49 lbs (0.22 kg)
6.80
3.26
.20
2.15
.55
1.00 1.38
Stainless Steel 2.40 MIN
3.50 MAX
Ø.31
Part Number Drawing Movement Holding Capacity Weight
70030-SS 1.73 in 560 lbs (2.50 kN) 0.49 lbs (.22 kg) .86 1.75
7.41
6.10
TOGGLE CL AMPS
2.91
Ø.31
.93
.93
Part Number Drawing Movement Holding Capacity Weight
Ø.31
1.50
3.88 MIN
70031 2.48 in
4.88 MAX 1,980 lbs (8.80 kN) 2.20 lbs (1.00 kg) .86 1.75
1.50
.86 1.75 3.88 MIN
4.88 MAX
.93
Part Number Drawing Movement Holding Capacity Weight
1.50
3.88 MIN
70031-SS 2.48 in
4.88 MAX 1,980 lbs (8.80 kN) 2.20 lbs (1.00 kg)
Ø.43
11.50
3.66
Ø.43
1.24
6.22 MIN
1.88 7.21 MAX
1.24
6.22 MIN
Ø.43
70032 2.32 in
3.16 2.25 4,000 lbs (17.60 kN)
2.25 3.16 5.00 lbs (2.27 kg)
2.15
10.17
TOGGLE CL AMPS
3.53
Ø.43 1.24
5.60 MIN
7.30 MAX
2.15
1.00 2.10
Ø.20 .50
.51 MIN
.88 1.38 Ø.16
.92 MAX
.56 1.00
.44
.51 MIN
Jergens, Inc. | 15700
.92S. Waterloo Road | Cleveland, Ohio 44110-3898 USA
22 Ø.16
MAX
TOGGLE CLAMPS
1.00
Ø.20 .50
WORKHOLDING SOLUTIONS GROUP
.88 1.38
1.00 2.10
Ø.20 .50
.56 1.00
.44
TOGGLE CL AMPS
.56 1.00
.44
2.52
1.39
Ø.17 .52 .20 .75 Ø.28
.83
.81 1.50
.66
4.06
.68 Ø.22 1.39
1.29 .35 .75 Ø.28
70035 2.25 in 1,000 lbs (4.45 kN) 0.68 lbs (0.31 kg)
.81 1.50
.66
2.52
.68 Ø.22 1.39
1.29 .35 .75 Ø.28
1.00 1.56
Ø.24 .63 MIN
1.34 MAX
.81 1.50
4.06 .66
Stainless Steel .68 Ø.22
1.29 .35
2.52
Part Number Drawing Movement Holding Capacity Weight
70035-SS 2.25 in 1,000 lbs (4.45 kN) 0.68 lbs (0.31 kg)
1.44 2.12
Pull Action Latch
5.50
3.50
1.94
1.25 Ø.34
1.06 2.13
5.50
.90
1.60
1.06 2.13 .75 Ø.22
TOGGLE CL AMPS
.90
Ø.31
1.20 Ø.34 .50
1.85 1.37 1.93
Ø.38
1.44
.61
1.72 MIN
2.15 MAX
8.42
1.60
.75 Ø.22
Ø.31
1.37 1.93
Ø.38
1.44
.61
1.72 MIN
Stainless Steel 2.15 MAX
8.42
1.45
.70
1.22 MIN
1.67 MAX
.56
1.50 Ø.27
2.00
1.96
1.25 Ø.34
TOGGLE CL AMPS
Ø.39
1.94 2.64
Ø.50
2.36
1.42
2.70 MIN
3.44 MAX
11.71
2.12
1.12 Ø.41
Ø.47
2.37 3.35
Ø.62
2.65
1.81
2.75 MIN
3.60 MAX
13.21
1.60 1.95
8.50
1.91
Ø.33
TOGGLE CL AMPS
1.26
.56 .16
1.78 2.54
Ø.38
2.00 2.37
.47
2.96
9.88
Ø.25
1.33
.63 Ø.17 8-32 THD
1.30
.63 1.05 .50
Ø.25 1.29
2.62
5/8-18 THD
8-32 THD
Part Number Plunger Travel Holding Capacity Weight 1.07
1.30
70042
.50 0.63 in 100 lbs (0.45 kN) 0.09 lbs (0.04 kg)
Ø.37 .25
1.29
2.62 2.65
TOGGLE CL AMPS
3.09
5/8-18 THD .81 .50
Ø.37 .25
1/4-20 THD
5/8-18 THD
2.65
70043 0.75 in 200 lbs (0.90 kN) 0.12 lbs (0.05 kg)
Ø.37 .25
3.09
.81 .50
2.65
.88 HEX
1/4-20 THD
5/8-18 THD 3.09
.81 .50
Ø.37 .25
1/4-20 THD
Stainless Steel
2.65
3.09
Phone: 877-426-2504 | Fax: +1 216-481-6193
.81 .50| E-mail: workholding@jergensinc.com | www.jergensinc.com
27
TOGGLE CLAMPS
WORKHOLDING SOLUTIONS GROUP
3/4-16 THD.
Ø.44 .25
4.97
3/4-16 THD.
4.27
1.25 1.56 .60
Ø.44 .25
1.00 HEX
4.97
5/16-18 THD
4.97
3/4-16 THD.
4.27
1.25 1.56 .60
Ø.44 .25
1.00 HEX
4.97
5/16-18 THD
Stainless Steel
1.82
5/16-18 THD
Ø.62
.32
6.12
1.82
5.45
Ø.62 2.73 .88
.32
6.12
1.61 HEX
5.45
2.73 .88
Part Number Plunger Travel Holding Capacity Weight
70045 1.61 HEX 2.63 in 700 lbs (3.11 kN) 1.54 lbs (0.70 kg)
3.54
5/16-18 THD
1.63 2.20
3.54
1.38 Ø.21
1.96
5.51
Ø.43 3.20
1.31 1.88
TOGGLE CL AMPS
2.05
2.47 1.44 Ø.27
5/16-18 THD Ø.43 3.50
1.31 1.88
.97
4.80
Ø.43 3.50
2.25
3.35 1.62 Ø.33
Ø.62 4.35
3/8-16 THD
1.62 2.25
1.26
6.30
Ø.62 4.35
3.60
1.62 2.19
3.60
1.38 Ø.27
5/16-18 THD Ø.44 3.60
1.62 2.19
1.00
1.87
5.46
Ø.44 3.60
1.63 2.23
TOGGLE CL AMPS
2.23
1.63 Ø.34 Ø.62
4.49
3/8-16 THD
3.97
6.83
Ø.62
4.49
1.63
Ø.50
4.25
2.40 1.38 1.63 Ø.28
5/16 -18 THD 3.27
1.63 .69
Ø.50
6.02 2.20
1.62
Ø.62
2.89
.81
2.51 2.28
7.04
2.95
4.53 1.97 Ø.41
TOGGLE CL AMPS
1/2-13 THD
1.97 2.95
Ø.79 5.84
1.77
9.22
6.85
1.38
Ø.28 .75
1.26
16
2.1
1.25 1.75
1.22
M8
2.26
3.94
TOGGLE CL AMPS
Part Number Base Arm Handle Moves Bar Opens Holding Capacity
1.91 Weight
Ø.32
1.25
70152 Flanged Adjustable U-Bar 62° 115° 3822.36lbs (1.70 kN)* 0.66 lbs (0.30 kg)
*applies to U-Bar position closest to handle 1.77 2.53
6.85 3/8-16
16
2.1
1.22
2.26
3.94
7.79
1.91
Ø.32
1.25
2.36
3.50
1.77 2.53
1.65
3/8-16
3.54
5.62
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
70153 Flanged Adjustable U-Bar 58°7.79 106° 600 lbs (2.70 kN)* 1.30 lbs (0.59 kg)
*applies to U-Bar position closest to handle
3.50
1.65
3.54
5.62
M8
M6
1.00
1.29
2.16
.88 1.37 1.85
1.33
M8
2.89 1.50
7.24
2.16
1.85
1.33
Part Number Base Arm Handle Moves Bar Opens Holding Capacity Weight
2.89 1.50
70154 Flanged Adjustable U-Bar 7.24 70° 90° 500 lbs (2.20 kN)* 0.71 lbs (0.32 kg)
*applies to U-Bar position closest to handle
2.24
Ø.33 1.62
TOGGLE CL AMPS
2.68
1.62 2.24
3/8-16
3.50
2.54
1.69
4.52
10.68
M5
Ø.17 1.02
.53
.39
1.49
1.30
1.25 .62 1.00
.49
M5
1.16
2.30
1.49
1.30
1.02
.39
1.02
M5
.53 Ø.17
1.49
1.25 .62 1.00 1.30
.49
.39 1.16
2.30
Stainless Steel M5
Part Number Base 1.30 Arm Handle Moves1.49 Bar Opens Holding Capacity Weight
.49 Ø.27
70160-SS Flanged Adjustable U-Bar 175° 92° 112.74lbs (0.50 kN)* 0.16 lbs (0.07 kg)
1.71
.90
1.16
*applies to U-Bar position closest to handle 2.30
M8
TOGGLE CL AMPS
Ø.27 1.71
.74 .90
2.55 2.59
2.08 1.15 1.83
.98
M8
1.77
3.66
2.55 2.59
.74
M8
1.71
.90 Ø.27
2.77 2.59
2.08 1.15 1.83
.98
1.77
.74 3.66
M8
Stainless Steel
Ø.33 2.50
3/8-16
Ø.33 2.50
1.02 1.38
3/8-16
1.35
2.66
5.16
3.50 3.64
1.02
2.50 M10
1.38 Ø.33
1.35
1.02
2.66
M10 5.16
Stainless Steel
1.38
Ø.26 .75
.55
Ø.26 Ø.19
.61 MIN
1.77 MAX
1.88
.53
0.51 4.84
1.00
1.38
TOGGLE CL AMPS
Ø.26 .75
.55
Ø.26 Ø.19
.61 MIN
1.77 MAX
1.88
.53
0.51 4.84
Stainless Steel 1.00
2.38
Ø.33
1.62
.75
Ø.33 Ø.31
.86MIN
1.65MAX
2.91
.53
.74 6.63
1.49
Ø.33 Ø.31
.86MIN
1.65MAX
2.91
.53
.74 6.63
Stainless Steel 1.49
1.62
TOGGLE CL AMPS
Ø.25 .98
.70
1.57 MIN
2.99 MAX
2.04
.62
.64 5.82
1.31
1.57 2.36
.86 1.57
1.65 Ø.33
2.54
.95
.81 7.65
2.54
.95
.81 7.65
Stainless Steel
2.16 3.34
TOGGLE CL AMPS
1.37 Ø.41 2.25
Ø.41 Ø.43
1.18 MIN
2.44 MAX
3.54
1.24
1.40 8.30
2.16 3.34
Ø.41 1.37 2.25 Ø.41
1.18 MIN
3.11 MAX
Ø.43 3.48
1.24
1.14 7.59
Ø.41 9.15
1.37
.78
2.04 .11
.57 .75
3.14 2.27
Ø.41 9.15
TOGGLE CL AMPS
1.37
.78
2.04 .11
.57 .75
3.14 2.27
1.43
.43
2.04
Ø.26 1.43
3.54
1.29 1.88
.96
.43
2.04
4.80
TOGGLE CL AMPS
2.24
Ø.33 1.62
4.20
4.25
.69
1.62 2.20
Ø.5 1.77
6.02
2.99
1.62 2.28
Ø.61
3.22
.80
2.00
7.08
TOGGLE CL AMPS
Part Number D (in) L (in) L1 (in) M
70068 0.44 0.80 0.62 1/4-20
70069 0.50 1.22 1.00 5/16-18
70070 0.56 1.50 1.25 3/8-16
70071 0.75 3.31 3.00 1/2-13
70072 0.75 4.81 4.50 1/2-13
Flanged Washers
2 Washer Set
TOGGLE CL AMPS
TOGGLE CL AMPS
70013.................10 70039.................25 70093.................43 70160-SS...........35
70014.................11 70040.................25 70094.................43 70161.................35
70015.................11 70041.................26 70095.................43 70161-SS...........35
70016.................12 70042.................27 70097.................43 70162.................36
70017...................9 70043.................27 70098.................43 70162-SS...........36
70018.................14 70043-SS...........27 70099.................43 70163.................37
70018-SS...........14 70044.................28 70100.................44 70163-SS...........37
70019.................14 70044-SS...........28 70101.................44 70164.................37
70019-SS...........15 70045.................28 70102.................44
70164-SS...........38
70020.................16 70046.................29 70103.................44
70165.................38
70021.................17 70047.................29 70110.................44
70166.................38
70022.................17 70048.................29 70111.................44
70166-SS...........39
70022-SS...........18 70049.................30 70112.................44
70167.................39
70023.................18 70050.................30 70113.................44
70168.................39
70024.................18 70051.................30 70114.................44
70025.................19 70052.................31 70115.................44 70169.................40
70026.................15 70053.................12 70116.................44 70169-SS...........40
70026-SS...........15 70053-SS...........13 70121...................6 70180.................43
70027.................17 70055-SS.............5 70122...................9 70181.................43
70028.................19 70058.................43 70123...................9 70182.................43
70029.................20 70059.................43 70125.................11 70183.................43
NOTES
WORLD HEADQUARTERS
15700 S. Waterloo Road
Cleveland, OH 44110-3898
866.594.5565
jergensinc.com/workholding
workholding@jergensinc.com
WORKHOLDING SOLUTIONS SPECIALTY FASTENERS LIFTING SOLUTIONS ©2017 jergens, inc. | DRM0817