Professional Documents
Culture Documents
Machine Design MCQs
Machine Design MCQs
Machine Design MCQs
Quiz # 4
Student Name & Reg. #
1 By using welding joints alterations and additions can be easily made 6 It is the distance from the centre of one rivet to the centre of the next rivet
in the existing structures. measured parallel to the seam
TRUE Margin
FALSE Pitch
Back pitch
Diagonal pitch
2 The welded joints provide maximum efficiency (may be 100%) 7 In order to make the joints leak proof or fluid tight in pressure vessels like
which is not possible in case of riveted joints. steam boilers, air receivers and tanks etc. a process known as
TRUE Caulking
FALSE Fullering
3 Welding processes that use heat alone 8 ______ types of failure can happened in rivited joints.
Forge Welding 3
Fusion Welding 4
5
None of Above
4 Riveted joints are ___________ 9 The boiler has _____________joint as well as __________ joint.
5 the material of a rivet must have a tensile strength not less than 10 Factor of safety of hand rivited boiler's lap joint is _______
40 N/mm2 4.5
65 N/mm2 4.75
80 N/mm2 4.25
None of Above