Professional Documents
Culture Documents
TFPM Pre Filtration Mat Coarse 45 fl150 g2 e
TFPM Pre Filtration Mat Coarse 45 fl150 g2 e
Max. temperature 80 °C
[m2] 1
Filter area • Shater-proof synthetic fibres-100% polyester
• The filter media is compressed towards clean air side allowing the full
[g/m2] 150
Surface weight approx. depth of the media to absorb dust
[mm] 11,0 • Thermally bonded
Material thickness approx. • High dust holding capacity due to the progressive density structure of
[m3/h/m2] 5.400 the media
Recommended nominal air flow • Testing for paint compatibility by Fraunhofer IPA
[m/s] 1,50 • For coarse dust filtration with demands on higher air flows and high
Air velocity dust holding capacity
[Pa] 27 • For filtration in all types of air conditioning and ventilation and general
Initial pressure drop industrial painting
measured on a flat sheet 610 x 610 mm
40
35 • Rolls in special dimensions and custom prints available-depending on
Anfangsdruckdifferenz
30 the quantity
25 • Cut pads available
20
15
• Pad holding frames available
10 • Custom shapes can be produced
5 • Also available as filter tube or filter bag
Initial
0
900 1.200 1.500 1.800 2.100 2.400
• Standard roll lenght: 20,00 m
Volumenstrom
Air flow [m³/h] [m³/h] • Max. roll width: 2,20 m
• Max. cut lenght: 10,00 m
Notice:
All information and illustrations are sole property of Volz and are provided to the best of our company´s knowledge. Yet our company does not take over any warranty for the completeness and/ or correctness and cannot be held liable for any damage occurring to the recipient through the use or through her or his trust in the
completeness and/ or correctness of the information. The given data are mean values with tolerances due to normal production variations and do not release the recipient from own checks, investigations and test. Furthermore, all data serve as service description and shall not be interpreted as a warranty for composition or service life.
Volz reserves the right to change specifikations without notice.