Professional Documents
Culture Documents
Service Letter: Hartzell Propeller Inc. HC-SL-61-336 Governor - Seal Washer and Washer Replacement
Service Letter: Hartzell Propeller Inc. HC-SL-61-336 Governor - Seal Washer and Washer Replacement
Service Letter: Hartzell Propeller Inc. HC-SL-61-336 Governor - Seal Washer and Washer Replacement
SERVICE LETTER
HC-SL-61-336
Governor - Seal Washer and Washer Replacement
1. Planning Information
A. Effectivity
(1) Hartzell Propeller Inc. S-1-44F governors installed on Cirrus SR22T aircraft are
affected by this Service Letter.
SERVICE LETTER
HC-SL-61-336
Governor - Seal Washer and Washer Replacement
E. Compliance
(1) If an S-1-44F governor is leaking from the high RPM adjust screw, perform
the assembly and disassembly instructions specified in the Accomplishment
Instructions of this Service Letter.
(2) If the nut on the high RPM adjust screw is removed from an S-1-44F governor,
assemble the governor in accordance with the Accomplishment Instructions in
this Service Letter.
F. Approval
(1) FAA approval has been obtained on technical data in this publication that
affects type design.
G. Manpower
(1) Approximately 1 man hour is required to disassemble, assemble, and test the
governor.
(2) Approximately 1 man hour is required for removal and installation of the
governor on the engine.
H. Weight and Balance
(1) Not changed
I. Electrical Load Data
(1) Not changed
SERVICE LETTER
HC-SL-61-336
Governor - Seal Washer and Washer Replacement
2. Material Information
A. Material Necessary for Each Governor and Supplied by Hartzell Propeller Inc.
Part Number Description Qty
B-3808-5 Nut 1
B-6330 Washer 1
103669 Seal washer 1
SERVICE LETTER
HC-SL-61-336
Governor - Seal Washer and Washer Replacement
3. Accomplishment Instructions
A. Remove the governor from the engine in accordance with the Hartzell Propeller Inc.
Owner's Manual 115N (61-00-15), Hartzell Propeller Inc. Service Letter
HC-SL-61-277, or the Aircraft Maintenance Manual.
B. Governor diasssembly, reassembly, and testing must be performed by a certified
governor overhaul facility with the necessary equipment to test the governor.
C. Governor Disassembly
(1) Remove and discard the B-3808-5 nut, B-6330 washer, and the 103669 seal
washer from the high RPM adjust screw.
(2) Further disassembly is not required if the governor is leaking around the high
RPM adjust screw.
D. Governor Assembly
(1) Install a new 103669 seal washer on the high RPM adjust screw.
(2) With the countersink side facing the seal washer, install the new B-3660 washer
on the high RPM adjust screw.
(3) Install the new B-3808-5 nut and set the high RPM in accordance with Hartzell
Propeller Inc. Hydro-Mechanical Governor Maintenance Manual 130B
(61-23-30)
E. Install the governor on the engine in accordance with the Hartzell Propeller Inc.
Owner's Manual 115N (61-00-15), Hartzell Propeller Inc. Service Letter
HC-SL-61-277, or the Aircraft Maintenance Manual.
F. Indicate compliance with this Service Letter in propeller logbook.
G. Recommended Service Facilities
(1) Hartzell Propeller Inc. has a worldwide network of Recommended Service
Facilities that are recommended by Hartzell Propeller Inc. for overhaul and
repair of our products.
(2) Each service facility must meet standard FAA requirements and additional
Hartzell Propeller Inc. requirements before being recommended by Hartzell
Propeller Inc. Each service facility is audited by Hartzell Propeller Inc. to verify
the continuation of the standards.
(3) Hartzell Propeller Inc. recommends that you use one of these service facilities
when having your propeller or governor overhauled or repaired.
SERVICE LETTER
HC-SL-61-336
Governor - Seal Washer and Washer Replacement
(4) For a current list of Hartzell Propeller Inc. Recommended Service Facilities,
contact Hartzell Propeller Inc. Product Support or refer to the Hartzell
Propeller Inc. website at www.hartzellprop.com; select Service & Support then
Recommended Service Facilities.
H. Contact Information
Hartzell Propeller Inc.
Attn.: Hartzell Product Support
One Propeller Place
Piqua, Ohio 45356-2634 USA
Phone: (001) 937.778.4379
Fax: (001) 937.778.4391
E-mail: techsupport@hartzellprop.com
SERVICE LETTER
HC-SL-61-336
Governor - Seal Washer and Washer Replacement