Professional Documents
Culture Documents
Industrial General Questions
Industrial General Questions
Industrial General Questions
(A) the extent of absorption in human is excepted to be>90% of the administered dose
(C) the extent of absorption in human is excepted to be >50% of the administered dose
(D) the extent of absorption in human is excepted to be <50% of the administered dose
2. As per BCS classification a drug is considered highly soluble when the highest dose strength is soluble
in
3. Cyclodextrins are used in pharmaceutical applications for improving the bioavailability of drugs
belongs to which class, according to the BCS classification
(A)class I
(B)class II
(C)class III
(D)class IV
4.According to BCS classification , the drugs having low solubility and high permeability are classified in
a. Class I
b. Class II
c. Class III
d. Class IV
5. According BCS , the drugs have low solubility and low permeability belongs to
a. Class I
b. Class II
c. Class III
d. Class IV
6. According to the BCS classification, which class of drugs often considered as poor drug candidates for
oral administration
(A)class I
(B)class II
(C)class III
(D)class IV
(A) Picking means tablet material adhered to the wall of die cavity.
(B) Sticking means tablet material adhered to the wall of die cavity.
(C) Sticking means small amount of tablet powder adhered to punch face after
compression.
(D) Sticking means particles stick to each other and forms a segregated mass.
a) Mottling
b) Sticking
c) Picking
d) Capping
(A) Mottling
(B) Picking
(C) Cracking
(D) Leaching
a. Weight Variation
b. Capping
c. Mottling
d. Picking
11. …….. is a defect in which film of a tablet become dull or hazed after a prolonged period of storage
a. Chipping
b. Blooming
c. Blushing
d. Blistering
12. Too rapid evaporation of the solvent from tablet coat may result
(A)bloom
(B)dull film
(C)blistering
(D)hazing
a. Capping
b. Lamination
c. Chipping
d. Cracking
(C) Cracking
(D) Blooming
(A)magnesium stearate
(B)magnesium sulphate
(C)magnesium phosphate
(D)magnesium carbonate
17. The acceptable weight loss in case of conventional tablets after friability test is about
(C)less than 2 to 4%
(D)more than 2 to 4%
18. Which one of the following test is performed to assure uniform potency for tablets of low dose drugs
(A)friability test
(B)hardness test
(D)disintegration test
19. To assess the resistant of tablet to abrasion, the test performed is known as
a) Hardness test
b) Disintegration test
c) Friability test
a. Monsanto tester
b. Roche friabilator
c. Disintegration apparatus
21. Durability of tablet to combined effect of shock and abrasion is evaluated by using
(C) Friabilator
22. Water for injection differs from sterile water for injection because it is free from
(B) Pyrogen
(C) Preservative
(D) Anti-Oxidant
23. When the term “sterile dosage form” is used,it refers to a product
a. Mice
b. Rabbit
c. Cat
d. Rat
(C) Phenol
28. The direction “To be used within 30 days after first opening.” is given for ______
a) Suppositories
b) Mixture
c) Paste
d) Eye drops
29. Which of the following is used as vehicle in ophthalmic drops
a) Ethanol
b) Methanol
c) Isopropyl alcohol
d) Boric acid
a. Buffers
b. Preservative
c. Thickening agent
31. The container used to protect the product from contamination and as well as from loss of contents
during use are called
a) Well-closed containers
c) Light-resistance containers
32. Non parental type of glass consists of which of the following type
(A) Type -I
33. Which of the following is used as Vulcanizing agent in manufacture of rubber closure?
a) Sulphur
b) Activated carbon black
c) Talc
d) Stearic acid
34. The package composed of base layer having cavities which hold the pharmaceutical product and a lid
is called
a) Strip Package
c) Blister Package
a. Multi-dose Container
b. Air-tight Container
c. Well-closed container
d. Aerosol container
36. Which type of glass container is not generally used for parenteral preparation?
(A) Type 1
(B) Type 2
(C) Type 3
(D) Type 4
(A) Vials
(B) Ampoules
(C) Bottles
39. Type II glass is prepared from Type III glass by surface treatment with;
(A) Lime
(B) Oxygen
(D) Silicon
44. The following type of Glass is used for packaging of food products
45. The following type of Glass is used for packaging of topical products
46. If the product containing high amount of alcohol, ethers or organic acids then we should avoid use
of………………….. For packaging of these products.
(A) Metal
(B) Glass
(C) Plastic
(D) Any of the above can be used
(B) Powder
(C) Injectable
(D) None
49. Soda lime glass not suitable for parenteral solution because.
(D) None
50. Ferrous or manganese oxide is added during the manufacture of glass container to make
(D) None
51. Plastic container is not suitable because
(A) Rubber
(B) Metal
(C) Glass
(D) Plastic