Professional Documents
Culture Documents
Preparations For Work
Preparations For Work
Figure 1
Attach a warning tag
Figure 2
Sound the travel alarm
Turn on the travel alarm off switch when you start to move the machine.. Sound the horn and let other workers and
bystanders know you are starting the machine.
Figure 3
Hot filament of a broken bulb can ignite spilled fuel or oil
Figure 4
Use tools safely
WARNING
Place the control lockout lever securely to "Locked" position to lock out the control hydraulics before starting the
engine or leaving the operator's seat. Unless the control lockout lever is in the "Locked" position, control levers can be
operated by careless touch, which could cause serious injury.
Figure 5
Control lockout system
A. Unlocked position (When this lever is put at this position the engine can not be started)
B. Locked position (When this lever is put at this position the engine can be started)
This system is used to LOCK OUT the attachment, slew and the travel unit. Place the control lockout lever equipped on
the left control console to "Locked" (B) position to lock out the hydraulic operating levers.
Figure 6
Never jump on/off the machine
Figure 7
Always maintain a three point contact with the steps and handrails
When you get on and off the machine, always maintain a three point contact (two feet and one hand or one foot and
two hands) with the steps and handrails and face the machine.
Do not use any controls as handholds, when entering or leaving the operator’s station.
Do not try to climb on or off the machine when carrying tools or supplies. Use a hand line to pull equipment up onto
the platform.
Figure 8
Remove all mud and oil from the steps
Remove all mud and oil from the steps of other places used to get on and off the machine.