Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

14/12/2020 108 - B3FG01P8P0 - 0 - 26/03/2014 - Removing - refitting : Master cylinder

REMOVING - REFITTING : MASTER CYLINDER

ESSENTIAL : Observe the safety and cleanliness recommendations .

1. Replacement of parts in all cases

Description Quantity
Master cylinder seal 1

2. Tooling
Workshop equipment : pipe spanner .

3. Removing
Disconnect the ancillaries battery.

N.B. : Protect the components under the master cylinder from brake fluid splashes.

CAUTION : Immediately clean any escaped brake fluid from painted surfaces.

Drain the brake fluid reservoir as completely as possible (if necessary, use a clean syringe).

Figure : B3FG2SND

Remove the ancillaries battery .


Move aside the engine fusebox .
Disconnect the brake fluid level connector (at "a").

public.servicebox.peugeot.com/docapvAP/affiche.do?ref=B3FG01P8P0&refaff=B3FG01P8P0&typeDoc=2&idFct=FCT0039 1/3
14/12/2020 108 - B3FG01P8P0 - 0 - 26/03/2014 - Removing - refitting : Master cylinder

Figure : B3FG2SOD

Disconnect the brake pipe unions (1) ; Using a pipe spanner.

Figure : B3FG2SPD

Remove :
The 2 nuts (4)
The master cylinder (5) and brake fluid reservoir assembly (2)
The seal
The bolt (3)

public.servicebox.peugeot.com/docapvAP/affiche.do?ref=B3FG01P8P0&refaff=B3FG01P8P0&typeDoc=2&idFct=FCT0039 2/3
14/12/2020 108 - B3FG01P8P0 - 0 - 26/03/2014 - Removing - refitting : Master cylinder

The master cylinder (5) brake fluid reservoir (2)

4. Refitting

CAUTION : Observe the braking system tightening torques .

Refit :
The brake fluid reservoir (2) on the master cylinder (5)
The bolt (3)
The seal (new)
The master cylinder (5) and brake fluid reservoir assembly (2)
The 2 nuts (4)

Connect the brake pipe connectors (1) ; Using a pipe spanner.


Reconnect the brake fluid level connector (at "a").
Refit :
The engine fuse box
The ancillaries battery

Fill the brake fluid reservoir .


Bleed the brake system (see the relevant operation).
Check the brake fluid level.

CAUTION : Perform the operations that are required following a reconnection of the ancillaries battery .

Reconnect the ancillaries battery.

public.servicebox.peugeot.com/docapvAP/affiche.do?ref=B3FG01P8P0&refaff=B3FG01P8P0&typeDoc=2&idFct=FCT0039 3/3

You might also like