Professional Documents
Culture Documents
Iron Man Remix For Dummy 13
Iron Man Remix For Dummy 13
Dummy 13
Printium 3D
VIEW IN BROWSER
Summary
Pound some Ground with this Iron Man remix of Soozafone’s Dummy 13.
(With Magnetic Feet)
f k h d
4.89 hrs 5 pcs 0.20 mm 0.40 mm PLA 39 g Prusa MK4
0.10 mm PET
0.08 mm
Instructions by Printium 3D
For Iron Man, you should be printing the outer armor in Iron Red and Gold
filament. I choose to use PLA instead of the recommended PETG because I
got more model detail from the PLA. I did use galaxy black PETG for the
interior frame parts.
For Iron Man, I printed the hands in Iron Red PLA. I could not get the Iron
Red PLA filament hands to snap onto the PETG internal framework, it was
just too tight at 200%. You may want to print just the hands at 203%. This
worked for me.
Print all the provided Printium 3D remixed parts at 100%. (They are
already designed at 200% of the original Soozafone’s model.)
The feet have 2 added counterbores per foot for 6x3 mm TRYMAG
Neodymium magnets.
If you want to use the magnets, you will also need to print the remixed,
symmetrical left and right ankles as they are modified to clear one half of
the magnets. (See the underside foot photo.)
Why Magnets?
This helps the model stand up/balance better on magnetic surfaces. Use a
tiny drop of model glue to secure them. Magnets are optional. Even if you
don’t want the magnets right now, print the remix feet and ankles. You can
always add the magnets later. (Best for 200% scale models.)
The outer chest armor has been remixed to hold an Arc Reactor. I quickly
designed one with simple features. There are other designs that look great
on Printables. If you are going to scale the print up even more, you may
want to look at those.
The Arc Reactor just press fits into the chest armor round pocket. No glue
should be needed. (The Arc Reactor and Eye Inserts print together in white
PLA. See *.bgcode file.)
I did the design this way because not everyone has an MMU unit.
The majority of the helmet surface data is the skilled work of Tiger78 on
Thangs.com. Thank you Tiger78. I modified the scale and internal structure
to accommodate the Dummy 13 frame at 200%. The helmet requires
support but only at one place. (See the MK4 gbcode print file.) Carefully
break away the built in neck side supports with needle nose pliers at the
separation line. See photos.
Helmet face sides, L & R already have supports built in. Carefully break
them away along the seam line like the helmet side supports. Print in Gold
PETG. (For me, the Gold filament face parts required some clean up work.
Trimming, filling & Xacto blade work. Wear gloves. Be careful, the parts are
very small and difficult to hold.)
Read; All the head parts use variable layer height for good detail. I
recommend you use the provided MK4 *.bgcode files.
Trim or file finish parts before assembly to get nice clean edges. After
installing the eyes, glue the gold face halves together to the helmet main
with slow setting model glue. You only need a small dab of glue. Use too
much and it will seep out and ruin the head. Wrap with large rubber band
until dry. (Do not use CA glue.)
Again, If you have an MK4, I recommend that you use the existing
*.bgcode files. I have slowed the printer down to get the necessary detail
shown in the photos. You will never pull it off at full tilt.
Update;
New folder added with alternate STL files that are at the original Dummy
13 scale. Scale to what ever size you need. Supports are needed for some
of these files. I hope this makes scaling things up easier for everyone.
Thank you for your “likes” and kind suggestions. Enjoy this model remix.
Filament used;
Prusa PETG galaxy black
Credit;
Model files
iron-man-chest-original-dummy-13-size.stl
Scale to whatever size you need
iron-man-eye-inserts_arc-reactor-original-dummy-13-… .stl
Scale to whatever size you need
iron-man-main-helmet-original-dummy-13-size.stl
Scale to whatever size you need
iron-man-gold-faceplate-original-dummy-13-size.stl
Scale to whatever size you need
2x-frame-ankle-v4.stl
These are at 200% scale
2x-armor-foot-chest-v17-modified-iron-red-pla.stl
These are at 200% scale
iron-man-d13-eyes_arc-reactor-200-white-pla.stl
These are at 200% scale
iron-man-d13-face-plate-gold-200.stl
These are at 200% scale
iron-man-d13-main-helmet-200-iron-red-pla.stl
These are at 200% scale
Print files
iron-man-d13-internal-structure-ankle-inserts-black… .bgcode
h PET k 0.40 mm f 0.20 mm 0.22 hrs 3g d Prusa MK4
iron-man-d13-face-plate-gold-2004n_01mm_petg_mk4is_… .bgcode
h PET k 0.40 mm f 0.10 mm 0.94 hrs 3g d Prusa MK4
iron-man-d13-eyes_arc-reactor-white-pla-200_04n_02m… .bgcode
h PLA k 0.40 mm f 0.08 mm 0.26 hrs 1g d Prusa MK4
iron-man-d13-head-pla-200_04n_02mm_pla_mk4is_2h2m.bgcode
h PLA k 0.40 mm f 0.20 mm 2.06 hrs 13 g d Prusa MK4
License
Attribution-NonCommercial