Professional Documents
Culture Documents
11 Technical Data
11 Technical Data
11 Technical data
11.1 Readings
Important
The readings below are indicative values when operating at reference conditions. Check
the section Reference conditions. These values are no rejection limits. In case of doubt,
consult your Atlas Copco Customer Center.
For the maximum working pressure and the outlet pressure, consult the section Compressor
data.
Pressure readings
Item Reading
dp of air filter Below 0.044 bar
Intercooler pressure (loaded condition) 1.7-3 bar(e)
Intercooler pressure (unloaded condition) (-0.65)-(-0.70) bar(e)
Oil pressure (depends on climatic conditions) 1.8-3.5 bar(e)
Item Reading
Oil temperature Approx. 40 ˚C
Air outlet temperature Approx. 25 ˚C
Cooling water inlet temperature Below 40 ˚C
Cooling water outlet temperature Below 50 ˚C
Item Opening
pressure
Low-pressure safety valve(s) for 7 up to 10.4 bar (101.5 up to 3.7 bar(e)
151 psi) compressors
High-pressure safety valve(s) for 10 and 10.4 bar (145 and 11 bar(e)
151 psi) compressors
APF236826 181
Instruction book
50 Hz compressors
ZT/ZR 132 compressors designed for a maximum inlet temperature of 40 ˚C/104 ˚F with IE2
motor
ZT/ZR 132 compressors designed for a maximum inlet temperature of 40 ˚C/104 ˚F with IE3
motor
11.5 Limitations
Minimum - maximum ambient temperature (for 0 - 40 °C
standard compressors)
Minimum - maximum temperature of air inlet (for 0 - 40 °C
standard compressors)
Maximum altitude 1000 m
Minimum temperature of cooling medium (water or 0 °C
air) inlet
Maximum temperature of cooling air inlet (for 40 °C
standard compressors)
Maximum temperature of cooling water inlet - open 40 °C
circuit
182 APF236826
Instruction book
Temperature Reading
Oil Approx. 40 ˚C
Outlet of low pressure stage 120-235 °C
Outlet of high pressure stage 100-235 °C
Air outlet Approx. 25 ˚C
Inlet of cooling water Below 40 ˚C
Outlet of cooling water Below 50 ˚C
Compressor type l
ZR 110, ZR 132, ZR 145 29
APF236826 183