Professional Documents
Culture Documents
Q1/ give the diagram and the classification of Engineering materials. ةيسدنهلا داوملا فينصتو يطيطختلا مسرلا ءاطعإ - Sol/
Q1/ give the diagram and the classification of Engineering materials. ةيسدنهلا داوملا فينصتو يطيطختلا مسرلا ءاطعإ - Sol/
materials.
.إعطاء الرسم التخطيطي وتصنيف المواد الهندسية
Sol/
Q2/give the diagram and the classification of Engineering
metals and non-metallic materials.
.إعطاء الرسم التخطيطي وتصنيف المعادن الهندسية والمواد غير المعدنية
Sol/
Q6/why the steel and other ferrous alloys are consumed in large
quantities.
.لماذا يتم استهالك الفوالذ والسبائك الحديدية األخرى بكميات كبيرة
Sol/
1-they have such a wide range of mechanical properties.
.لديهم نطاق واسع من الخواص الميكانيكية
2-may be fabricated with relative ease.
.يمكن تصنيعها بسهوله
اقتصادية في اإلنتاج3-are economical to produce.
Q7/Steel and other ferrous alloys have some limitations give
chiefly limitations.
.الصلب والسبائك الحديدية األخرى لها بعض القيود التي تعطي قيودًا بشكل رئيسي
Sol/
1-A Relatively high density
.كثافه عاليه نسبيا
2- a comparatively low electrical conductivity.
.الموصلية الكهربائية منخفضة نسبيا
3-an inherent susceptibility to corrosion in some common
قابلية متأصلة للتآكل في بعض البيئات المشتركةenvironments.
Q8/What is The distinction is made between cast and wrought
alloys.
.يتم التمييز بين السبائك المصبوبة والسبائك المطاوعة
Sol/
cast alloys that are so brittle and wrought alloys mechanical
deformation are termed.
.تسمى السبائك المصبوبة الهشة للغاية والسبائك المطاوع بالتشوه الميكانيكي
Q9/ Mention the main features of the non-ferrous materials
(metals)
.)اذكر السمات الرئيسية للمواد غير الحديدية (المعادن
Sol/
1-The pure metals are rarely used as structural materials as they
lack mechanical strength.
.ونادرا ما تستخدم المعادن النقية كمواد هيكلية ألنها تفتقر إلى القوة الميكانيكية
2-They are mainly used with other metals to improve their
strength.
.يتم استخدامها بشكل أساسي مع معادن أخرى لتحسين قوتها
3-They are used where their special properties such as
corrosion resistance,
.يتم استخدامها حيث تتميز بخصائصها الخاصة مثل مقاومة التآكل
Q10/Draw the classification of non-ferrous (metals)
sol/ بالملزمة8 الحل مخطط صفحه
Q11/illustrate the classification of polymers according to origin.
.وضح تصنيف البوليمرات حسب المنشا
Sol/
1-Natural polymers: Naturally occurring polymers-those derived
from plants and animals-have been used for many centuries.
البوليمرات الطبيعية تلك المشتقة من النباتات والحيوانات استخدمت منذ قرون عديدة
2-Synthetic polymers: Many of our useful plastics, rubbers, and
fiber materials are synthetic polymers.
العديد من المواد البالستيكية والمطاطية واأللياف المفيدة:البوليمرات االصطناعية
.لدينا هي بوليمرات صناعية
Q12/Give the types of synthetic polymers and their properties.
اذكر أنواع البوليمرات االصطناعية وخصائصها
sol/1-thermoplastics.
2-thermosets.
3-Elastomers.
التكملة تحت
have the property of increasing plasticity, and deform plastically
with increasing temperature.
.و تشوه بشكل بالستيكي مع زيادة درجة الحرارة، لديها خاصية زيادة اللدونة
Q13/ Give the types polymers depend at monomers.
.اذكر أنواع البوليمرات التي تعتمد على المونومرات
Sol/
1-homopolymer
2-copolymers
3-terpolymer
Q14/ Give the types polymers depend at structure?
.اذكر األنواع التي تعتمد عليها البوليمرات في تركيبها
Sol/
1-linear polymers
2-branched polymers
3-crosslinked polymers
4-network polymers
Q15/which one and the two chains have low-density the chains
are:
1-linear polymer.
2- short-chains polymer.
. أي إحدى السلسلتين ذات كثافة منخفضة والسالسل عبارة عن بوليمر خطي0
.بوليمر قصير السالسل
Sol/
high-density polyethylene (HDPE) is primarily a linear polymer,
whereas low-density polyethylene (LDPE) contains short chain
branches.
في حين،هو في المقام األول بوليمر خطيHDPE) ( البولي إيثيلين عالي الكثافة
.على فروع قصيرة السلسلةLDPE) ( يحتوي البولي إيثيلين منخفض الكثافة
Q16/ Give the schematic representations of polymers:
(a) linear.
(b) branched.
(c) crosslinked
(d) network (three-dimensional) molecular structures.
.اعطي التمثيل التخطيطي للبوليمرات
Sol/
Q17/ which materials are most frequently oxides, nitrides, and
carbides. Give their properties.
إعطاء.المواد التي تكون في أغلب األحيان أكاسيد ونيتريدات وكربيدات
.خصائصهم
Sol/
6- Low density.
7- Extreme hardness.
8- Inexpensive.
9- Easily available.
10- Brittle and wear-resistant.
11- Thermal and electrical insulators.
12- Chemically stable.
13- Nonmagnetic.
ب الملزمة هذني السهالت14 نقاط صفحه