Network device and configuration group assignment Bahir Dar institute of technology wants to install the network for to all the lab and office of computing Building. All you are Information technology students are invited to do this network installation project. Before implementing the physical installation, you should have to do all the following requirements and activities on logical simulation device by using cisco packet tracer. To conduct the logical simulation the institution has set the following requirements.
✓ The network will be installed on the all floors of the building.
✓ Each floor should be considered as one LAN, each LANS include at list 10 computer. ✓ Yous should have to be use all necessary network device such as router, switch, personal computers, server, cable and others are not listed yet. ✓ You can choice the your own network topology Based on the above information you are requested to do the following activities with good perfection. a) Each network device should have unique name, and the name should be meaningful. b) Each network device should be configured Ip adders and other network protocol c) For the security purpose all router should be secured by using console password, enable password, enable secret password and Vty password. d) In order to specify the range of network address you should implement Wild card mask concept e) To show how you are understand the concept of ACL one of the LAN should be restricted to access the central server f) Use RIP2 and IGRP, EIGRP and OSPF for the dynamic routing protocol for a certain host. g) Use NAT/PAT and DHCP h) Show us on a certain host how can we use Frame Relay configuration i) Use a certain host to show us how can we use PPP network protocols NB. ➢ Number of groups is not More than Three ➢ Never forget you are doing well all the question form a-j ➢ submission and presentation date will be held on 04-08-2016 ➢ I needs both pkt file and documentation