Professional Documents
Culture Documents
DT411 Um R1.0
DT411 Um R1.0
0
INSTALLATION MANUAL
DT411 ReadWritor
DESCRIPTION SPECIFICATIONS
The DT411 ReadWritor is part of the FireWatcher Adapter Voltage Range 100V to 240VAC
series product line. It is used to set address numbers
Battery Type AA, Alkaline, 4pcs
on detectors and other field devices. The primary
function of the service tool is to allow the system Battery Voltage 1.5VDC
installers to preprogram devices, read device
Operating Current 34mA
address, and read device unique ID, Production
Serial Number (PSN). DT411 Structure:
a. Base POWER SUPPLY
b. Bus Socket
The Power supply comes from four batteries (size AA,
c. LCD
alkaline, 1.5VDC) or from an external power supply
d. Keypad
(100V~240VAC). The external power supply comes
e. Supply Hub
from the AC‐DC adapter through the supply hub (see
f. Battery Container
letter e).
NOTE
Any material extrapolated from this document or DO NOT CONNECT THE EXTERNAL
from D‐TECTRON’s instructions or other documents POWER SUPPLY WHEN THE BATTERIES
describing the product for use in promotional or ARE INSTALLED.
advertising claims, or for any other use, including
description of the product’s application, operation,
installation, and testing is the sole responsibility of
the user. D‐TECTRON will not assume any liability for
such use. In no case will D‐TECTRON’s liability exceed
the purchase price paid for a product.