Professional Documents
Culture Documents
AGGREBIND Viviendas Golf
AGGREBIND Viviendas Golf
CONTENT:
Color my World.....................................................................................2
Concept for the on-site manufacturing of Lightweight Roofing Tiles.....3
Soil Stabilization for Community Development.....................................4
Pathways, Walkways and Sidewalks..................................................5-6
Solutions for Golf Course....................................................................7-8
Install & Repair Fence Posts Using On-site Soils.................................9
Embankment Bund Construction AggreBind & Geotextile...................10
Embankment Sealing..............,............................................................11
Install Fence posts Bund Construction
Color my World
Roofing Tiles
Bunker Seal
COLOR MY WORLD
AggreBind is available in a wide range of colors
Color
Natural / Clear
STYLISH
ATTRACTIVE
AFFORDABLE
Available Colors
Clear
Black
AggreBind is a unique,
Blue
environmentally friendly,
Green
cross-linking and water based,
Red
styrene acrylic polymer with proprietary tracers.
Yellow
www.aggrebind.com
Concept for the on-site manufacturing of lightweight roofing tiles
Materials: Equipment:
Chopped straw/dried grass, mixed with fine silt/sand and stabilized Hand tools, hand made moulds, hand
with AggreBind. compac on equipment and local community
Size: Aprox. 30cm x 30cm but could be in various shapes and sizes. labour. No other power required.
Depth: 20 to 25 mm
info@aggrebind.com
www.aggrebind.com
For century's creativity, art, and cultural, has been an important part of life.
Why is it not being considered for inclusion in the designs for new self-built community
housing?
AggreBind is available in a wide range of colours, providing the home builder or brick
manufacturer with unlimited design options.
Communities can finally participate together to provide, homes, clinics, schools, shops,
factories, roads and recreational areas for sport etc.
Training, basic business plans, finance and technical support, would be required to
ensure that the projects complied with local regulations.
Organizations like the ASISA (Association for Savings and Investments) could offer
assistance with establishing credible financial structures.
Self income generating co-operatives could be established from within the community to
handle the purchase of product and the leasing of equipment.
This would help bind the communities to work together to create a better future for them,
and their children.
info@aggrebind.com
www.aggrebind.com
Pathways, Walkways and Sidewalks
Applications include:
Re-surfacing of existing driveways and pathways.
Decorative and architectural features.
Exterior and interior wall treatments.
Surface sealing.
Manufacture of load bearing bricks and pavers.
Stabilizing and installation of pathways and roads.
Applications as creative as your imagination
Decorative solutions for sealing and re-surfacing of existing Driveways and Pathways
AggreBind forms a chemical bond and a penetrating seal for the resurfacing of existing asphalt, concrete, blocks
etc providing the following benefits:
· A non-slip decorative durable surface
· Highly resistant to most liquids including petroleum based products
· Environmentally safe
· Non-flammable
· Will withstand heavy rain after only 1 hour (asphalt emulsion sealers take 6 to 10 hours)
· Cost effective
· Approved and manufactured in strict compliance with ISO 9001 and ASTM standards
· Non-toxic
· Resists damage caused by UV rays
· VOC free
AggreBind is effective for the renovation and re-surfacing of ageing asphalt/concrete parking areas, driveways
and pathways.
The surface to be treated must be structurally sound and damaged areas must be repaired prior to using
AggreBind.
Curing time: The time to dry will vary, depending on weather conditions. Normally in ambient temperatures it
can be walked on in 60 minutes. A full 24-hour cure is recommended before traffic is driven on the new
surface, although it is not uncommon to have light traffic in only 4 hours (where wheel turning should be
avoided).
Procedures:
Clean the surface of the concrete to remove any oil/grease
etc.
Seal the surface with a mixture of 1 part AGB-WT (clear)
mixed with 3 parts water.
Mark out the design shapes required on the floor with chalk.
Mix 3 parts of 1mm sand with 1 part 0.063 fine sand.
Mix 1 part AGB with 3 parts water and add the fine sand/clay
until it is a loose mixture that can be applied with a large
brush to a depth of +-3 to 5mm.
Smooth the surface with a plastering trowel/float.
Protect the surface from rain for 4 hours.
Do not use the area until the surface is dry.
Providing golf course solutions for noisy and migrating loose aggregate pathways
Protocol
Layer Depth:
100mm for walking only areas
150mm for Golf Buggy areas
Seal the base Install a 4mm aggregate layer Compact to a level surface
Solution:
Stabilizing and sealing the sub-soil beneath the sand layer, and designing adequate drainage, provides
solutions for virtually all Bunker problems.
INSTALLATION GUIDELINES:
The objective is to provide a spray on, colourless, water
resistant lining for bunkers that will assist drainage and prevent
the ingress of stone into the bunker from sub-soils.
Application:
Remove all the bunker sand.
Contour and compact the base for drainage and check the
drainage system.
Spray the surface with a mixture of 1 part AggreBind
concentrate to 5 parts water at a rate of 2 ltrs per sq mtr.
To provide additional protection to the face of the bunker, if this
is required, drill downward angled holes into the face at a
spacing of +-15cm and fill them with the polymer mixture.
Repeat the spraying process after 1 hour at a rate of 1 ltr per sq
mtr.
Do not install if heavy rain is forecast or if frost is imminent.
This is a water-based product that requires the water to be
released before curing.
Compact the treated area with a roller or hand Tamper when
the surface is no longer adhering to the compaction equipment.
After 24 hours spray the surface of the treated area with the
remaining AggreBind water mix if additional firmness is
required.
When the surface is dry replace the bunker sand.
Clean all equipment with water immediately after use.
www.aggrebind.com
Install & repair fence posts using on-site soils
Application:
1. Dig a square hole 3 times larger than the width and
thickness of the fence post.
Remove any grass, weeds & roots; save the soil for later use.
2. Put a 20mm layer of gravel in the base of the hole.
3. Place the post in the hole and secure it in a vertical position.
4. Mix 1 part AggreBind with 3 parts water and add this mixture
to the saved soil.
Mix together until the mixture binds together when hand squeezed.
5. Place the treated soil into the hole and compact until the
post is securely held.
6. Spray the surface of the compacted soil with a mixture of
1 part AggreBind mixed with 3 parts water.
AggreBind can also be used to secure fence posts and for the manufacture of bricks,
blocks, pavers , road edging stones, and road marking.
www.aggrebind.com
Embankment Bund Construction AggreBind & Geotextile
Concrete topping
Dry sand applied when sealer coat Stabilized and sealed sand to protect
wet (to soften visual impact and geotextile fabric and reduce airborne
increased protection to geotextile particle erosion
Embankment sealing
Problem
Problem:
Asphalt is porous and this allows water to penetrate, providing water and nutrients for a wide range
of grasses and other plants.
www.aggrebind.com