Professional Documents
Culture Documents
0509-E01-001E Ver.1.2 Software For NEXTA Installation Manual
0509-E01-001E Ver.1.2 Software For NEXTA Installation Manual
Software for
NEXTA
The contents of this manual are subject to change without notice. Hitachi
High-Tech Science Corporation is not responsible for damages that may
result from the use or misuse of this document. Unauthorized reproduction
of this manual is strictly prohibited.
NOTE
Machines and software images contained in this document may vary from
the actual product.
I
II
Table of Contents
1. Safety Guide ....................................................................................... 1
2. Warning Labels .................................................................................. 3
3. Installation Cautions ......................................................................... 5
3.1.1. Confirm Power Supply ........................................................ 5
4. Installation Procedure ....................................................................... 7
4.1. Delivery ....................................................................................... 7
4.1.1. Confirmation Prior to Installation ......................................... 7
4.1.2. Opening Packaging ............................................................ 7
4.2. Discarding Packing Materials ...................................................... 8
4.2.1. Japan Packaging ................................................................ 8
4.2.2. Other Countries Packaging ................................................. 8
4.2.3. Other Packaging ................................................................. 8
4.3. Part Confirmation ........................................................................ 8
4.4. Software Installation .................................................................... 9
4.5. Use together with TA7000 Software ......................................... 10
4.6. Sample Observation Option RV-3TG Software Installation ...... 11
4.7. Sample Observation Option RVST0011 Software Installation .. 11
4.8. PC Station USB I/F Board Expansion ....................................... 11
5. Delivery Inspection & Pass Criteria ............................................... 15
5.1. Delivery Inspection Details ........................................................ 15
6. Operation Training ........................................................................... 17
6.1. Explanation for System Usage / Measurement Method ........... 17
6.2. Explanation of Measurement Cautions ..................................... 17
6.3. Explanation of Calibration and Maintenance ............................ 17
III
IV
1. Safety Guide
1. Safety Guide
Use sufficient care regarding the following cautions in order to use this
software correctly and safely.
WARNING
Be sure to follow all cautions noted in the operation manuals of the system
and the software (including this document). Failure to adhere to the
cautions may result in your danger or may damage the system.
1
1. Safety Guide
2
2. Warning Labels
2. Warning Labels
3
2. Warning Labels
4
3. Installation Cautions
3. Installation Cautions
This section describes the preparations needed for
installation prior to delivery of the instrument including road
and other information.
Main Unit 1
No of Necessary
6 Computer + Monitor 2
Outlets
Printer 1
Operation Procedure
1. Check to make sure the number of outlets is correct according to the
above table. Have the customer confirm the electric capacity.
2. Have the customer check to make sure the power supply is a 3 prong
outlet with ground.
5
3. Installation Cautions
6
4. Installation Procedure
4. Installation Procedure
4.1. Delivery
4.1.1. Confirmation Prior to Installation
Before installing, confirm the packed quantities.
The packed items vary based on the purchased options and the shipping
region. Refer to Table 4-1 to confirm the packed item.
Operation Procedure
1. Confirm the contents on the packing list.
2. Checked to see if there is any damage to the packaging material.
Operation Procedure
1. Be cautious of the following when opening the packaging.
CAUTION
During operations be careful with cutters and drivers so that people are not hurt
and equipment is not damaged.
7
4. Installation Procedure
8
4. Installation Procedure
•If this software is installed on the PC that the TA7000 software has
been installed already, this software launches when TA data files are
opened.
9
4. Installation Procedure
Read this section only if the TA7000 software and this software are
used together on the same PC. The TA data files are associated with
the last installed software (TA7000 or this software). If the associated
software is not that the user mainly use, follow the procedure below to
change the associated software
.
1. Prepare data files of the data formats that you want to change the
association.
7. Perform the steps 1…6 for all data formats that you want to
change the association.
10
4. Installation Procedure
For the Sample Observation option RV-3TG, the USB I/F board is included
based on the compatibility condition of the PC Station USB port and
Camera.
When the PC Station model is Optiplex 7020 or 5040, it is necessary to
expand the PC Station USB I/F board.
(For the Optiplex 7010 do not expand the USB I/F board.)
【Work Instructions】
※ The latest information is contained in the Assembly Adjustment
Specifications 【0506-E01-001 TA Software for NEXTA】 - 【RV-3TG_
Software for NEXTA Station Setup】.
11
4. Installation Procedure
(1) Shutdown the PC Station, unplug the power cable and remove the USB
devices other than the keyboard and the mouse.
(2) Remove the PC side cover and release the slot cover lock.
(4) Remove the board from the packaging and exchange the bracket for
the accompanying Low Profile.
※Only for standard PC Stations. In other systems it is matched to the
PC so replacement is not necessary.
(6) Remove the power connector from the HDD and connect the power
connector to the power branch cord.
※It is a hard fit, so be careful not to break.
(7) Connect the leftover end of the power branch cord to the location
where the connector was just removed from the HDD.
HDD
USB I/F
HDD
Board
12
4. Installation Procedure
(8) Attach the expansion board to the slot where the cover was just removed.
(9) Lock the slot cover and attach the PC side cover.
(11) Once the PC Station has started, load the accompanying CD.
※After PC start-up, the New hardware has been detected window is
displayed. Click Cancel to close the window.
(12) BUFFALO
Click Easy Start
(13) BUFFALO
Driver install
⇒ Click Next
(14) BUFFALO
Settings are complete
⇒ Click the × in the upper right
(15) Connect the Camera USB Cable to the USB I/F board left side port.
13
4. Installation Procedure
14
5. Delivery Inspection & Pass Criteria
15
5. Delivery Inspection & Pass Criteria
16
6. Operation Training
6. Operation Training
17