Professional Documents
Culture Documents
Teragren Moisture Meter Conversion Table
Teragren Moisture Meter Conversion Table
Teragren Moisture Meter Conversion Table
•The following
Wagner MMC
meters have 220: Settingto 95
been calibrated (note
strand bamboo – acclimated
performtothe test
45% RH onFahrenheit.
at 80° a stack At ofthis
4 planks, averaging
RH and temperature, multiple
the moisture tests
content of
along the planks)
Teragren’s Strand Bamboo should be approximately 8.3%.
•Wagner
Ligno Scanner SDM: Setting 26 (use ¼ depth setting – test may be performed on a single 12mm plank
MMC 220: Setting 95 (note – perform the test on a stack of 4 planks, averaging multiple tests along the planks)
layer)
•LignoTramex MRH
Scanner SDM: III:26Setting
Setting .78setting
(use ¼ depth (Subtract
– test may3bepoints from
performed readings)
on a single (note
12mm plank layer)– perform the test on a stack of 4
planks,
Tramex MRH III: averaging multiple
Setting .78 (Subtract 3 pointstests along(note
from readings) the– planks)
perform the test on a stack of 4 planks, averaging multiple tests along the planks)
Suggested Operating Range: 35% RH to 55% RH: Δ of 3.1 Points Teragren delivered moisture content range: 7-9% +/-1
Teragren and the Teragren logo are registered trademarks of Teragren Inc. ©2017 Teragren Inc. All rights reserved. teragren.com