Professional Documents
Culture Documents
Training Plan
Training Plan
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
TRAINING PLAN
ELECTRONIC PRODUCTS AND ASSEMBLY SERVICING NC II
Blended online
Combination
Modular
Learning Outcomes Contents Learning Resources
LO1. Prepare to assemble ❑ OHS Policies and Students/trainees must be
electronic products Procedures provided with the following:
❑ Philippine Electronics ❑ Learning Station
Code ❑ OHS manuals
❑ Mensuration/Mathematics ❑ PEC
Conversion of Units ❑ Tools and equipment
Applied Mathematics ❑ CBLM/Relevant
❑ Environmental Safety Instructional Materials
Work Safety ❑ Video Clips
requirements and ❑ Power point presentation
economy of materials
with durability
Knowledge in 5S
application and
observation of
required timeframe
Knowledge of proper
handling and disposal
of chemicals
Safety handling of
hand tools
Practicing 3Rs –
reduce, re-use,
recycle/recover
Managing waste from
electrical and
electronic equipment
(WEEE)
❑ Materials, tools and
equipment uses and
specifications
Identification of hand
and power tools
Proper care and use
of tools
LO2. Prepare/make pcb ❑ PCB Theory and Students/trainees must be
modules Characteristics provided with the following:
❑ PCB Problems and ❑ Variable power supply
Solutions ❑ Variable transformer
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
wires
❑ WorkingArea/Bench
❑ Learning materials
❑ Books and References
❑ Technical manuals
❑ Report forms
❑ CBLM
LO4. Perform electronic ❑ Assembly Procedures Students/trainees must be
product assembly ❑ Soldering Technology provided with the following:
Reflow Soldering ❑ Variable power supply
Wave Soldering ❑ Variable transformer
❑ Soldering iron
Hand Soldering
❑ Hot air soldering station
RoHS and Lead-Free
❑ Table top reflow oven
Soldering ❑ Desoldering tools
❑ Non-Solder Connections ❑ Screwdriver (assorted)
(terminal block) ❑ Wrenches (assorted)
Cleaning ❑ Allen wrench/key
Repair and Rework ❑ Function/Signal
Safety generator
❑ Multi-testers
ESD protection
(analog/digital)
❑ 3Rs Waste Management ❑ Utility knife/striper
Programs ❑ Pliers (assorted)
❑ WEEE Directives ❑ ESD-free work bench
with mirror
❑ Oscilloscope, digital
❑ High-grade magnifying
glass with lamp
❑ Flashlight/headlamp
❑ Soldering wire
❑ SMD soldering paste
❑ Stranded/solid/h ok-up
wires
❑ Assorted electronic
components
❑ Working Area/Bench
LEARNING MATERIALS
❑ Books and References
❑ Technical manuals
❑ Documentation forms
❑ Report forms
LO5. Test and inspect ❑ Proper Care and Use of Students/trainees must be
assembled electronic Tools provided with the following:
products ❑ Principles of Electrical TOOLS
Circuits ❑ Long-nosed pliers
❑ Handling of ❑ Diagonal cutters
Electronic/Digital ❑ Standard screwdrivers
Components ❑ Soldering iron, 30w
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
FACILITIES
❑ Working area/bench
❑ Sufficient lighting and
ventilation system
LEARNING MATERIALS
❑ Books and references
❑ Technical manuals
❑ Report forms
❑ Self-paced learning
elements
MATERIALS
❑ Solder lead
❑ Cleaning brush
❑ Lead free solder
❑ Resinco resolder
❑ Wire stranded,# 2,
different colors)
❑ Silicon grease
❑ Resistors (different
values)
❑ Capacitors (different
values)
❑ Transformer
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
TRAINING PLAN
ELECTRONIC PRODUCTS AND ASSEMBLY SERVICING NC II
Blended online
Combination
Modular
Learning Outcomes Contents Learning Resources
LO1. Prepare unit, tools ❑ Mensuration/Mathematics Students/trainees must be
and workplace for ❑ Drawing and Schematic provided with the following:
installation and service Diagram ❑ Learning elements and
❑ Environmental Safety manuals
❑ Hand and Power Tools ❑ Working area/bench
❑ Proper Care and Use of ❑ PPE
Tools ❑ Tools, equipment and
❑ Test and Measuring test instruments
Instruments ❑ Needed audio-video
❑ Care and use of Test and products and systems
Measuring instrument ❑ Needed consumer
❑ Audio-Video Products and appliances
Systems ❑ Service
❑ Domestic Electronic manuals/schematics
Appliances ❑ ESD free working
❑ Principles Of Electrical area/bench
Circuits ❑ Needed electronic
❑ Fundamentals Of Direct spare parts/supplies
Current Circuits
❑ Fundamentals Of
Alternating Current Circuits
❑ Fundamentals Of Electronic
Components and Circuits
❑ Fundamentals Of Digital
Logics, Components &
Circuits
❑ Fundamentals Of
Microprocessor Circuits and
Programming
❑ Analysis Of Troubles and
Isolation Techniques
❑ Principles of Sound and
Acoustics
❑ Fundamentals of Audio
Amplifiers
❑ Fundamentals of Audio
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
❑ Flashlight
❑ Cleaning brush
❑ High voltage probe
❑ Ball peen hammer
❑ Soldering lead
❑ Wires
❑ Assorted consumer
electronic components
❑ Working Area/Bench
Learning materials
❑ Books and References
❑ Technical manuals
❑ Documentation forms
Report forms
❑ CBLM
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
TRAINING PLAN
ELECTRONIC PRODUCTS AND ASSEMBLY SERVICING NC II
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
Digital To Analog
Conversion
Solenoid Actuators
Solid State Relay
LED
Light Sensor
Lighting Control System
Temperature Control
System
Temperature Sensor
Voltage And Current
Control System
Voltage/Frequency And
Frequency Conversion
Timers
Time Control System
Liquid Level Control
System
Optical Sensor
Fiber Optic Cable
Fiber Optic Diode (Tx And
Rx)
Optical And Touch Control
System
Hall Sensor
Encoder/ Decoder
DC/ AC And Brushless
Motor
Stepping And Servo Motor
Pulse Width Modulation
Rotation Control System
Acoustic Control System
Teaching Pendant
Basic Robotic Principles
Ultrasonic Sensor (Tx And
Rx)
Ultrasonic Control System
Infrared Sensor
Motion Sensor
Infrared Control System
Strain Gage
Pressure Sensor
Pressure Control System
Microcontroller
Microcontroller Interfacing
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
Industrial electronic
products may include the
following:
❑ Control boards and
modules
❑ Motor controllers and
drives
❑ Sensors and input
devices
❑ Actuators and output
devices
❑ Opto-electronics
equipment and
devices
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
❑ Data communication
systems
❑ Microcontroller-based
equipment
LO3. Diagnose faults and ❑ Systematic Pre-Testing Students/trainees must
defects of industrial Procedure be provided with the
electronic ❑ Troubleshooting Technique following:
modules/products/systems ❑ System Defects/Fault ❑ Tools, equipment and
Symptoms test instruments
❑ Mechanical and ❑ Needed audio-video
Electrical/Electronic Testing products and systems
❑ Company Policy/Procedures ❑ Needed consumer
appliances
❑ Service
manuals/schematics
❑ ESD free working
area/bench
❑ Needed electronic
spare parts/supplies
❑ Service manuals
LO4. Maintain/Repair ❑ Industrial Electronic Students/trainees must
industrial electronic Components be provided with the
products ❑ Industrial Electronic following:
Products ❑ Variable power supply
❑ Application of work safety ❑ Step-down
practices and time transformer
management ❑ Soldering iron/gun
❑ Use and maintenance of ❑ Desoldering tools
test instruments, tools, & ❑ Screwdriver
equipment (assorted)
❑ Schematic diagram reading ❑ Wrenches (assorted)
skills ❑ Allen wrench/key
❑ Troubleshooting, Repair and ❑ Signal generator -
maintenance of industrial AF/RF
components ❑ Multi-testers
❑ Analysis of troubles and (analog/digital)
isolation techniques ❑ Utility knife/stripper
❑ Application of ❑ Test jig
troubleshooting technique
❑ ESD-free work bench
❑ Application of substitution
technique with mirror
❑ Soldering/desoldering and ❑ Oscilloscope
wiring/cabling techniques ❑ High-grade
❑ Application of work safety magnifying glass with
practices and time lamp
management ❑ Flashlight
❑ Application of substitution
❑ Cleaning brush
technique
❑ Waste Management ❑ High voltage probe
Learning materials
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
❑ Books and
References
❑ Technical manuals
❑ Documentation forms
❑ Report forms
❑ CBLM
❑
Industrial electronic
products may include the
following:
❑ Control boards and
modules
❑ Motor controllers and
drives
❑ Sensors and input
devices
❑ Actuators and output
devices
❑ Opto-electronics
equipment and
devices
❑ Data communication
systems
❑ Microcontroller-based
equipment
LO5. Reassemble and test ❑ Re-assembling Procedures Students/trainees must
repaired industrial ❑ Service be provided with the
electronic products Documentations/Procedures following:
❑ Environmental ❑ Tools, equipment and
Requirements test instruments
❑ ECE Law Commissioning ❑ Needed audio-video
Procedures products and systems
❑ Needed consumer
appliances
❑ Service
manuals/schematics
❑ ESD free working
area/bench
❑ Needed electronic
spare parts/supplies
TP-EPAS-NC2-WCCTI
WEST CELEBES COLLEGE OF TECHNOLOGY, INC.
Technical-Vocational Department
Aurelio F. Freires Sr., Lebak, Sultan Kudarat
TP-EPAS-NC2-WCCTI