Professional Documents
Culture Documents
Page 18 of 49
Page 18 of 49
Specification No.
FOR SURFACE PREPARATION B224-000-79-41-PLS-01
AND PROTECTIVE COATING Rev. 6
HRRL PAGE 18 OF 49
Type & Two pack Two pack A two pack air Heat Single pack
composition polyamide cured epoxy resin drying self resistant silicone resin
epoxy resin based suitable curing solvent synthetic based
blended with pigmented and based medium medium with
coal tar medium, capable of inorganic zinc based two Aluminium
suitably adhering to silicate pack flakes.
pigmented manually coating with Aluminium
prepared minimum 80% paint suitable
surface and old zinc content up to 250°C.
coating. on dry film.
The final cure
of the dry film
shall pass the
MEK rub test
as per ASTM
D4752.
Volume Solids % 62 75 57 35 18
Minimum.
DFT per coat in
100-125 100-125 65-75 15-20 15-20
Theoretical
covering capacity 5.2-6.5 6.0-7.2 8-9 10-12 8-10
in M2/coat/ litre
Weight per liter in
1.40±0.03 1.41±0.03 2.3±0.03 0.95±0.03 1.00±0.03
Kg/litre
Touch dry at 30oC
(maximum), hrs 4 3 0.5 3 0.5
Hard dry at 30oC
(maximum), hrs 48 24 12 12 24