Professional Documents
Culture Documents
Datasheet VSO3-10 M Ha5076 EN
Datasheet VSO3-10 M Ha5076 EN
Datasheet VSO3-10 M Ha5076 EN
VSO3-10/M Size 10 (D05) Qmax 160 l/min (42 GPM) pmax 350 bar (5100 PSI)
Technical Features
›› Restrictor Valve with Reverse Flow Check with subplate mounting surface acc.
to ISO 4401, DIN 24340 (CETOP 05) standards
›› Meter-in or meter-out flow control
›› Leak-free closure in one or two service ports
›› Linear adjustment and positive seat closing
›› Desired settings may be locked down
›› Adjustment option with allen head and protective cup
›› In the standard version, the valve is zinc coated for 240 h protection acc. to ISO 9227
and valve body is phosphated
Functional Description
Dual hydraulic flow restrictor valve with by pass check valve option are used to control flow
rates in two separate lines (A,B) of a hydraulic circuit. The modular design provides six
functional versions. The valve restricts the fluid flow in one direction while providing reverse
free-flow in the opposite direction. The throttling is adjusted by means of a set screw.
The sandwich design enables simple stacking with other components of the same size.
The separate o-ring plate with fitted o-rings provides sealing of the valve connecting surface.
According to the valve arrangement, the meter-in or meter-out control is provided. Changing
the meter-in mode into the meter-out mode can be done by turning the valve by 180° around
its x-axis. The orientation of the throttle check valves in the valve body corresponds with
the symbols shown on the nameplate. The set screw can be operated by a key, handknob
or by a handknob with key lock.
50,8 (1.99)
54 (2.13)
6-
Fluid temperature range (FPM) °C (°F) -20 .... +120 (-4 ... +248)
6H
37,3 (1.47)
x15
16,7 (0.66)
/18
A TA
-2
Datasheet Type
13,5 (0.53) General information GI_0060 products and operating conditions
3,2 (0.13)
24,6 (0.97)
ISO 4401-05-04-0-05
39,7 (1.56) Mounting interface / tolerances SMT_0019 DIN 24340 (CETOP 05)
Pressure drop related to flow rate Check valve pressure drop related to flow rate
15
Pressure drop Dp [bar (PSI)]
1 3 5
(4350) 300 2
6 (174) 12
4
(3630) 250
(130) 9
(2900) 200
(2180) 150 (87) 6
7 1
(1450) 100
(43) 3
(725) 8 2
50 9
10 0
0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160
Number of turns the screw Throttle valve closed Throttle fully open
2 3 4 5 6 7 8 9 10 11 1 2
Page 1 www.argo-hytos.com
Subject to change · VSO3-10/M_5076_1en_09/2016
Dimensions in millimeters (inches)
Model ”C„
O-ring plate
supplied in each delivery
T max. 221 (8.7)
S max.215 (8.5)
max. 52,5 (2.1) 110 (4.33) 48,6 (1.91)
10 (0.39) 18 (0.71) 11,75 (0.46) 10 (0.39) 24,3 1,4 (0.1)
(0.96)
70x90 (2.75x3.54)
69,5 (2.74)
TA TB
A B
36,35 (1.43)
13 13
P
4x 6,5 (0.3) 5x 11 (0.4)
50 (1.96)
Functional symbols
Notes: The orientation of the symbol shown on the name plate corresponds with the function of the valve.
The separate o-ring plate allows to turn arround the body and to choose the function Meter out or Meter in.
Ordering Code
VSO3 - 10 / M -
Surface treatment
Restrictor Valve with Reverse No designation phosphated body, valve for 240 h
Flow Check, Modular salt spray test (ISO 9227)
A body and valve for 240 h salt spray test (ISO 9227)
Valve size B body and valve for 520 h salt spray test (ISO 9227)
Seals
No designation NBR
Modular design V FPM (Viton)
Functional symbols
Check valve in line A, Meter-out A Adjustment option
Check valve in line B, Meter-out B S allen head (hex.5) without protective cap
Check valve in line A and B, Meter-out C T allen head (hex.5) with protective cap
www.argo-hytos.com Page 2
Subject to change · VSO3-10/M_5076_1en_09/2016