Professional Documents
Culture Documents
15551E05 - Components For Cu-Ni Pipes
15551E05 - Components For Cu-Ni Pipes
eni spa
ISTITUTO ITALIANO
DELLA �A_!;PATURA
•
FUNCTIONAL SPECIFICATION
15551.PIP.MEC.FUN
Rev.5
November 2013
"' �
t�ff' /�,__)
5 Par. 2.2 modified lstituto ltaliano della Saldatura Po iZan Quaglia Nov 13
4 Par. 2.2 modified lstituto ltaliano della Saldatura Marini Quaglia July 12
3 Par. 1.2 and 2.2 modified lstituto ltaliano della Saldatura MECC Quaglia Oct. 10
Jl preseute documeuto C RJSERVATO ed C. di proprietri di EN/ E&P. Esso non srmi mostrato a Terzi ne srmlutiliu.atu per scopi dh·ersi da quelli per i quali C stato iul'iato.
This document is CONFIDENTIAL mu/ the sole property of EN/ E&P. It shall neither be shown to Tltird Parties uor used for purpose!i other tlum those for which it /w.f been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 2 of 14
FOREWORD
Rev. 1 28 Sheets
March 1993
Rev. 2 14 Sheets
December 2007
General Revision
Rev. 3 14 Sheets
October 2010
Modified Par. 1.2 and 2.2
Rev. 4 14 Sheets
July 2012
Modified Par. 2.2
Rev. 5 14 Sheets
November 2013
Modification of material designation (Par. 2.2: “UNS C70600” has been
substituted with “UNS 7060X”).
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 3 of 14
INDEX
1 GENERAL
1.1 Scope
2 FUNCTIONAL CHARACTERISTICS
2.3 Ergonomics
2.4 Safety
2.7 Documentation
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 4 of 14
1 GENERAL
1.1 Scope
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 5 of 14
1.2.4 Laws
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 6 of 14
2 FUNCTIONAL CHARACTERISTICS
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 7 of 14
Butt-welding fittings
• Execution:
according to EEMUA Issue n° 146 Tab. 1.4 and 1.5;
seamless up to DN 16”, from DN 18” up to DN 24”
obtained in two longitudinally welded shells, fully X-
Ray examined (according to ASME VIII Div. 1 UW
51)
- Eccentric/concentric Reductions
• Execution:
according to EEMUA Issue N° 146 Tab. 1.9.1, 1.9.2
and 1.9.3; seamless from DN 1” x 3/4” up to DN 16”
x 14”, from DN 18” x 16” up to DN 24” x 20”
obtained in two longitudinally welded shells, fully X-
Ray examined (according to ASME VIII Div. 1 UW
51)
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 8 of 14
• Execution:
according to EEMUA Issue N° 146 Tab. 1.6, 1.7.1,
1.7.2 and 1.7.3; seamless up to DN 16” x 16”, from
DN 18” x 12” up to DN 24” x 24” obtained in two
longitudinally welded shells, fully X-Ray examined
(according to ASME VIII Div. 1 UW 51)
- Elliptical Ends
• Execution:
according to EEMUA Issue N° 146 Tab. 1.8,
seamless up to DN 24”
- Inserts
• Execution:
forged according to EEMUA Issue N° 146 Tab. 6.1,
and manufacturer Standard. Dimensions: manifold
DN ½” ÷ 24”; butt-welding branch DN ½” ÷ 20”
• Execution: Forged
• Execution:
shall be manufactured according to EEMUA Issue
N° 146 Tab. 6.2 and 6.3 (3.2 for capillary brazing)
and manufacturer Standard. Dimensions: manifold
DN ½” ÷ 24”; branch for capillary brazing, socket-
weld, threaded DN ½” ÷ 2”.
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 9 of 14
• Execution:
diameters from DN ½” up to DN 2”, according to
EEMUA Issue N°146, while according to
manufacturer standard where dimensional features
do not satisfy construction requirements.
• Execution:
diameters from DN ½” up to DN 2”, according to
EEMUA Issue N° 146 Tab. 2.2 and 3.2, with
centered exagonal key tool, while according to
manufacturer standard where dimensional features
do not satisfy construction requirements.
• Execution:
shall be manufactured according to EEMUA Issue
N°146 Tab. 2.2 and 3.2 while according to
manufacturer standard where dimensional features
do not satisfy construction requirements.
- 90° elbows
• Execution:
- diameters from DN ½” to DN 2”, with socket-weld
facing or capillary brazing.
- shall be manufactured according to EEMUA Issue
N°146 Tab. 2.2 and 3.2 while according to
manufacturer standard where dimensional features
do not satisfy construction requirements.
- Concentric Reductions
• Execution:
- diameters from DN ¾” x ½” to DN 2” x 1 ½”, with
socket-weld facing or capillary brazing.
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 10 of 14
- Eccentric Reductions
• Execution:
• Execution:
diameters from DN ½” to 2” for straight TEEs and
from DN ¾” x ½” to DN 2” x 1 ½” for reduced TEEs
shall be manufactured according to EEMUA Issue
N°146 Tab. 2.2 and 3.2 for ends preparation, while
according to manufacturer standard where
dimensional features do not satisfy construction
requirements.
- Caps
• Execution:
- diameters from DN ½” to DN 2”, with socket-weld
facing or capillary brazing.
- shall be manufactured according to EEMUA Issue
N°146 Tab. 2.2 and 3.2 while according to
manufacturer standard where dimensional features
do not satisfy construction requirements.
• Execution:
construction and Dimensions according to ASME
B16.11, diameters from DN ½” to 2”.
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 11 of 14
Flanges
• Execution: forged
2.2.2 Certification
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 12 of 14
2.2.5 Materials
2.3 Ergonomics
2.4 Safety
The inspections which Client requests and reserves the right to testify
are listed in the technical documentation issued for the specific project.
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 13 of 14
2.7 Documentation
- Project documentation;
- Documentation issued for approval and approved by Client;
- Certificates of chemical analysis and mechanical tests on
materials
- Certificates pertinent to type and acceptance inspections and
special inspections;
- Visual and dimensional check and marking certificates.
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.
eni spa
exploration & production division 15551.PIP.MEC.FUN
REV. 5 November 2013
Sh. 14 of 14
Il presente documento è RISERVATO ed è di proprietà di ENI E&P. Esso non sarà mostrato a Terzi né sarà utilizzato per scopi diversi da quelli per i quali è stato inviato.
This document is CONFIDENTIAL and the sole property of ENI E&P. It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent.