Professional Documents
Culture Documents
Technical Sheet (Model PM15)
Technical Sheet (Model PM15)
Features
Steam Trap Ultrasonic Checker PM11 Software SurveyPro Light PM150
can be used for measuring the vibration and temperature Programme for analyzing the data which had been mea-
of each trap installed in your factory. sured by using the steam trap checker PM11 and for de-
termining the condition of the steam trap.
1. The checker displays vibration and temperature at the
same time. Applications
Testing a steam trap Testing a valve
2. One key operation for all functions.
Power supply 2 x 1.5V AA alkaline batteries (40 hours or more); 2 x 1.2V AA NiMH (32 hours or more)
Working Flow
1 2 3
Tag all installed steam traps Make a survey list (management log) Diagnose the traps
Put a tag on or next to each trap in your facto- The survey list contains all necessary data of Diagnose each trap on site using the checker
ry, so that it can be easily identified any time. your steam traps, like tag number, type, ma PM 11. Write down the vibration data mea-
nufacturer, size, operating pressure and other sured for each trap.
data and the later test results of each trap.
4 5
Complete the survey list Output the results of the analysis
Start the software SurveyPro Light and enter After entering all test results of the survey, the
the measured vibration data into the survey programme will show you an analysis summa-
list for each trap. Once the vibration value of a ry, lists of all defective steam traps, the sum to-
trap has been entered, the operating condition tal of steam loss, the related financial loss and
of the trap will be displayed immediately. The more. A history graph shows how the steam
list will also display the steam loss of each trap loss and the failure rate have changed over the
(if detected) and the related financial losses. time since the first steam trap survey.