Professional Documents
Culture Documents
Lighting Assessment ?
Lighting Assessment ?
in the Workplace
Download HSE Docs hseprof.com
This booklet is issued free of charge and can be obtained from the offices of the Occupational
Safety and Health Branch of the Labour Department. It can also be downloaded from website
of the Labour Department at http://www.labour.gov.hk/eng/public/content2_9.htm. For enquiries
on addresses and telephone numbers of the offices, please call 2559 2297.
This guide may be freely reproduced except for advertising, endorsement or commercial
purposes. Please acknowledge the source as ‘Lighting Assessment in the Workplace',
published by the Labour Department.
19
Lighting Assessment
Download HSE Docs hseprof.com
in the Workplace
Contents
1. Introduction ............................................................................... 2
Download HSE Docs hseprof.com
9. References ................................................................................ 17
1
1. Introduction
Good lighting plays an important role in safeguarding health at
work by enabling employees to perform their work
Download HSE Docs hseprof.com
2
The Purpose of Lighting Assessment
2. in the Workplace
In simple terms, a lighting assessment is a careful examination
of the lighting condition in the work environment. It serves to:
Download HSE Docs hseprof.com
3
3. Approaches to Lighting Assessment
There are basically two approaches to conducting a lighting
assessment in the workplace: by means of a checklist and by
Download HSE Docs hseprof.com
lighting measurement.
4
Compared with the checklist approach, lighting
measurement has the advantage of providing objective,
accurate and comprehensive information about the
Download HSE Docs hseprof.com
5
4. Illuminance Measuring Instrument
Illuminance is measured by a luxmeter, which is a handy
instrument with a sensor for light detection. The measured
Download HSE Docs hseprof.com
Display
Sensor
A good luxmeter with error less than 10% is available in the market.
1
British Standard, BS 667:2005 Illuminance Meters – Requirements and
Test Methods, 2005.
2
German Standard, DIN 5032-7:1985 Photometry; Classification of
Illuminance Meters and Luminance Meters.
3
International Commission on Illumination Publication, CIE Publication
No. 69 (1987) Methods of Characterizing Illuminance Meters and Luminance
Meters: Performance, Characteristics and Specifications.
6
Illuminance Measurement for General
5. Lighting
In ordinary workplaces, general lighting is provided to give
uniform illumination over the work area to meet the lighting
Download HSE Docs hseprof.com
7
Download HSE Docs hseprof.com
5m
5m
For an ordinary workroom of dimensions 5 m x 5 m, take illuminance
measurements at the centres of 16 equally divided squares.
8
illumination provided in the publication “Guidelines for
Good Occupational Hygiene Practice in a Workplace”.
Download HSE Docs hseprof.com
Readers should also note that two work areas with two
different work activities should be separately evaluated. In
other words, the office and the storage room of a company
should be separately measured and assessed.
9
Illuminance Measurement for a
6. Task / an Activity
In some workplaces, there may be visually-demanding tasks
/ activities for which more illumination is required than for
Download HSE Docs hseprof.com
10
inclined plane if the object is to be read on such a plane, e.g.
an easel. Similarly, the work plane is a vertical plane if the
object is to be read vertically.
Download HSE Docs hseprof.com
The light sensor of the luxmeter should be placed on the work plane.
11
For example, if the task position is mostly at the central
front area of an ordinary writing desk or a counter (as shown
in the following figure), this area may be divided into 4
Download HSE Docs hseprof.com
Major
Task Area
12
10cm
Download HSE Docs hseprof.com
20cm
13
Salient Points in Illuminance
7. Measurement in General
In measuring illuminance for general lighting or for a task /
an activity, the following points should be noted:
Download HSE Docs hseprof.com
300 lx
14
The measurement points should not be too close to walls or
obstructions.
Daylight should be shielded by blinds or curtains when assessing
Download HSE Docs hseprof.com
15
8. Assessment Records
Finally, the results of any lighting assessment should be
properly documented for reference and follow-up actions.
Download HSE Docs hseprof.com
16
9. References
For further information on lighting, you may refer to the
following publications:
Download HSE Docs hseprof.com
17
nd
Health and Safety Executive, HSG38 Lighting at Work, 2
Edition, 1997
18
10. Enquiries
For enquiries about this booklet or advice on occupational health
and hygiene matters, please contact the Labour Department's
Download HSE Docs hseprof.com
19
11. Complaints
If you have any complaint about unsafe workplaces and
practices, please call the Labour Department Occupational
Download HSE Docs hseprof.com
20
Lighting Assessment
in the Workplace
Download HSE Docs hseprof.com