Professional Documents
Culture Documents
2024 Cummins Full Power Gen Product Ranges
2024 Cummins Full Power Gen Product Ranges
Generation
CUMMINS
WARRANTY
600 distributors
Generator set
controls
Turbo
Engine
Technologies
Generator
Technologies
Fuel
Systems � Stamford Alternator
Power
Generation
� Generator Set
� PowerCommand Control
Filtration � Automatic Transfer Switch
� Digital Paralleling System
� Networking Software
� Fleeguard Filter � Switchgear
Features of
Cummins Engine
Type :
Four-stroke, water cooled, turbo
charged and after cooled.
Structure :
Cast steel crankshaft, connecting
rod, cast iron cylinder block.
Features of
Cummins Stamford Alternator
Standard
The alternator complies with the
requirements of GB755, the third part
of the BS5000, VED0530,
Winding and electronic NEMA MG1-32, IEC-34, CSA
performance : C22.2-100 and AS1359 standards.
2/3 pitch main stators and
damper winding eliminates Radio interference :
Electrical Features
triplen harmonics on the voltage Brushless device and the high-quality
waveform and is found to be the
Insulation and Impregnation :
AVR can guarantee a small interfer-
optimum design for trouble-free The insulation system is class 'H'. ence during radio transmission; if
supply of non-linear loads All wound components are impreg- necessary, we can provide the RFI in
nated with materials and processes addition.
The 2/3 pitch design avoids exces- designed specifically to provide the
sive neutral currents sometimes seen high build required for static windings Protection class :
with higher winding pitches, when in and the high mechanical strength All the Stamford land alternators
parallel with the mains. A fully required for rotating components. have met the IP23 standard protec-
connected damper winding reduces tion level; optional IP44 AC
oscillations during paralleling. This (air-cooled) protection can be
winding, with the 2/3 pitch and Telephone interference supplied but we suggest that all the
carefully selected pole and tooth THF (as defined in the BS IP44 generator should be equipped
designs,ensures very low waveform EN60034-1) <2% TIF (as defined in with a stator winding high-tempera-
distortion. the NEMA MG 1 - 22) <50 ture warning device.
Wet
Standby Prime Fuel
DCC Rated Engine Dimension (mm) Weight
Rated Rated Tank
Model Emissions Alternator Controller (kg)
without
kVA kW kVA kW kVA kW Model LxWxH (L)
fuel
C17 D5 16.5 13 15 12 X2.5-G2 S0L1-P1 PS0600 1667 x 930 x 1247 582 155
C28 D5 27.5 22 25 20 X2.5-G2 S0L2-P1 PS0600 1667 x 930 x 1247 605 155
C33 D5 33 26.4 30 24 X3.3-G1 S1L2-J1 PS0600 1753 x 930 x 1250 875 175
C38 D5 38 30.4 35 28 X3.3-G1 S1L2-J1 PS0600 1753 x 930 x 1250 910 175
C44 D5L 44 35 40 32 4BTAA3.3G13 UCI224C PS0600 2050 x 967 x 1510 909 156
C55 D5L 55 44 50 40 4BTAA3.3G13 UCI224D PS0600 2050 x 967 x 1510 922 156
C66 D5L 66 52 60 48 4BTAA3.3G13 UCI224F PS0600 2050 x 967 x 1510 969 156
C110 D5 110 88 100 80 6BTA5.9-G5 UCI274C PC1.2 2268 x 1094 x 1576 1244 350
C150 D5 150 120 136 109 6BTAA5.9-G6 - UCI274E PC1.2 2550 x 1100 x 1850 1635 448
C150 D5B 150 120 138 110 6BTAA5.9 G15 UCI274E PC1.2 2537 x 1020 x 1856 1504 448
C170 D5 170 136 155 124 6BTAA5.9-G7 - UCI274E PC1.2 2550 x 1100 x 1850 1635 448
C175 D5B 170 140 159 127 6BTAA5.9 G15 UCI274F PC1.2 2537 x 1020 x 1856 1556 448
C175 D5e 175 140 158 126 QSB7-G5 IIIA / T3 UCI274F PC1.2 2656 x 1100 x 1658 1572 464
C200 D5e 200 160 182 146 QSB7-G5 IIIA / T3 UCI274H PC1.2 2656 x 1100 x 1658 1670 464
C220 D5e 220 176 200 160 QSB7-G5 IIIA / T3 UCI274H PC1.2 2656 x 1100 x 1658 1670 464
C220 D5 220 176 200 160 6CTAA8.3-G2 UCI274H PC1.2 2746 x 1100 x 1646 2500 360
C250 D5 250 200 227 182 6CTAA8.3-G9 UCDI274J PC1.2 2746 x 1100 x 1646 2500 350
C275 D5 275 220 250 200 QSL9-G5 4g UCDI274K PC1.2 3135 x 1100 x 1928 2347 609
C275 D5B 275 220 250 200 6LTAA9.5G3 UCDI274K PC1.2 2800 x 1100 x 1871 2282 533
C300 D5 300 240 275 220 QSL9-G5 4g HCI 434 D PC1.2 3549 x 1100 x 1928 2570 609
C300 D5B 300 240 275 220 6LTAA9.5G3 S4L1D-D41 PC1.2 2800 x 1100 x 1871 2495 533
C330 D5 330 264 300 240 QSL9-G5 4g HCI 434 D PC1.2 3135 x 1100 x 1928 2570 609
C330 D5B 330 264 300 240 6LTAA9.5G1 S4L1D-D41 PC1.2 2800 x 1100 x 1871 2495 533
C350 D5B 350 280 320 256 6LTAA9.5G1 S4L1D-E41 PC1.2 2800 x 1100 x 1871 2579 533
C400 D5 400 320 360 288 QSG12G1 S4L1D-F41 PC2.2 3686 x 1160 x 2266 4053 689
C450 D5 450 352 409 327 QSG12G2 S4L1D-G41 PC2.2 3686 x 1160 x 2266 4053 690
C450 D5eB 450 360 409 327 QSZ13 G7 S IIIa / T3 S5L1D-C41 PC2.2 3686 x 1160 x 2266 4053 677
C500 D5 500 400 455 354 QSZ13 G5 S II / T2 S5L1D-D41 PC2.2 3427 x 1500 x 2066 4121 820
C500 D5e * 500 400 455 364 455 364 QSX15-G8 S II S5L1S-D41 PC2.2 3427 x 1500 x 2066 4121 820
C550 D5 550 440 500 400 500 400 QSZ13 G10 S5L1S-D41 PC2.2 3376 x 1500 x 2191 4239 677
Wet
Standby Prime Fuel
DCC Rated Engine Dimension (mm) Weight
Rated Rated Tank
Model Emissions Alternator Controller (kg)
without
kVA kW kVA kW kVA kW Model LxWxH (L)
fuel
C550 D5e * 550 440 500 400 500 400 QSX15-G8 S II S5L1D-D41 PC2.2 3427 x 1500 x 2066 4975 820
C640 D5 631 505 575 460 KTAA19-G6 S5L1D-E41 PC1.2 3684 x 1454 x 2000 4703 option
C660 D5 ST2 660 528 600 480 QSK19-G4 T2 HCI5F PC3.3 4270 x 1674 x 2178 5073 option
C700 D5 706 565 640 512 640 512 VTA28-G5 S5L1D-F41 PC3.3 4047 x 1608 x 1942 5760 option
C700 D5 ST2 715 572 650 520 QSK19-G4 T2 S5L1D-F41 PC3.3 4270 x 1674 x 2178 5073 option
C825 D5A * 825 660 750 600 750 600 VTA 28-G6 S6L1D-C41 PC3.3 4047 x 1608 x 2187 6040 option
C900 D5 * 900 720 820 656 820 656 QSK23-G3 4g S6L1D-D41 PC3.3 4266 x 1879 x 2052 6680 option
C1000 D5 1000 800 900 720 KTA38 G5 S6L1D-E41 PC3.3 4374 x 1785 x 2229 8057 Option
C1000 D5 * 1041 833 939 751 939 751 QST30-G3 S6L1D-E41 PC3.3 4297 x 1685 x 2079 6296 option
C1100 D5 * 1110 888 1000 800 1000 800 QST30-G4 S6L1D-F41 PC3.3 4417 x 2000 x 2387 7374 option
C1100 D5B * 1132 906 1029 823 1029 823 KTA38-G5/G14 S6L1D-F41 PC3.3 4470 x 1785 x 2229 8350 option
C1250 D5A 1250 1000 1125 900 KTA38G9 S6L1D-G41 PC3.3 4722 x 1785 x 2241 8569 option
C1400 D5 * 1400 1120 1250 1000 1250 1000 KTA50-G3 S6L1D-H41 PC3.3 5283 x 2066 x 2233 10075 option
C1675 D5 * 1675 1340 1400 1120 1400 1120 KTA50-G8 S7L1D-D41 PC3.3 5690 x 2033 x 2330 10324 option
C1675 D5A * 1675 1340 1500 1200 1500 1200 KTA50-GS8 S7L1D-D41 PC3.3 5690 x 2033 x 2330 10324 option
C1875 D5E 1875 1500 1700 1360 QSK50-G15 T2 S7L1D-F41 PC3.3 5864 x 2248 x 2521 11617 option
C2000 D5EB 2000 1600 1875 1500 QSK50G16 T2 S7L1D-G41 PC 3.3 5864 x 2248 x 2521 11903 Option
C2250 D5E 2250 1800 2000 1600 QSK50G17 T2 S7L1D-H41 PC3.3 5864 x 2248 x 2521 12350 option
C2500 D5A * 2500 2000 2250 1800 2250 1800 QSK60-G8 4g S7L1D-J41 PC3.3 6206 x 2494 x 2800 17441 option
C2750 D5BE 2750 2200 2500 2000 2500 2000 QSK60-G23 T2 S7L1D-K41 PC3.3 6206 x 2494 x 2800 18911 option
C3000 D5BE 3000 2400 2750 2200 2750 2200 QSK78-G21 T2 LVSI804T PC3.3 5671 x 2948 x 3197 19282 option
C3500 D5 * 3500 2800 3125 2500 3125 2500 QSK95G4 LVSI804W PC3.3 7889 x 3028 x 3810 29500 option
EPA Tier2*/
C3500 D5e 3500 2800 3125 2500 3125 2500 QSK95-G5/G10 LVSI804W PC3.3 7912 x 2608 x 3366 30668 option
TA Luft 2g
C3750 D5 * 3750 3000 3350 2680 3350 2680 QSK95G4/G10 T2 LVSI804X PC3.3 7889 x 3028 x 3810 29500 option
Open Set Configuration
● Standard sub-based fuel tank for C17 D5 - C550 D5e (option: separate tank)
● Separate fuel tank 8hr. operation for C640 D5 - C3750 D5
● Starting battery 12VDC or 24 VDC
● Battery charger with automatic battery trickle charger
● Fuel Filter, Air Filter, Lube Oil Filter
● Standard set mounted circuit breaker for C17 D5 - C550 D5e
● Mechanic Governor (C17 D5 - C66 D5L)
● Electronic Governor (90 D5 - C3750 D5)
● Alternator brushless, single bearing, self-excited (C17 D5 - C690 D5)
● Alternator brushless, single bearing, PMG (C700 D5 - C3750 D5)
● Vibration Isolator rubber type (C17 D5 - C1675 D5A)
● NFPA110 Single step load 100%
● Silencer Residential or Critical depend on requirement
● Comply with DIN, BS, SAE, ISO, VDE, NEMA, IEC, CSA, AS, etc..
Installation Drawing
1
3
1
2
5
4 3
4 6
2
Enclosures Configuration
Sound-attenuated and weather protective enclosures from Cummins Power Generation meet even the strictest sound
requirements and provide optimum protection from inclement weather.
● 14-gauge, low carbon, hot-rolled ASTM A569 steel construction (panels) 2 02 Heavy duty recessed
patented lifting device
● 12-gauge, low carbon, hot-rolled ASTM A569 steel construction (posts)
● Stainless steel hardware 03 External emergency 3 3
Stop button or
● Compact footprint Operator safety
● Zinc phosphate pretreatment, e-coat primer and super
4 04 Exhaust wrapping for
durable powder topcoat paint minimize corrosion and color fade increase safety and higher
limited ambient capacity
● Two or three recessed doors per side, depending on generator
set dimensions, for service access 05 Compact low noise 5 5
enclosures compliant
● Doors key and padlockable for added security to 200/4/1EC Step 2006
● Weather protective seals around all doors on sound attenuated 6 06 Use of Zintech and powder
enclosures coating for high resistance
againt corrosion
● Enclosed exhaust silencer improves safety and protects against rust
07 High standard 7 7
● Critical sound level exhaust silencers in sound attenuated enclosures soundproofing
materials
● Rain collar and rain cap
● Non-hydroscopic sound-attenuating material 8 08 Slam shut doors
● Fixed louvers
● Cambered roof prevents water accumulation
● Fuel and electrical stub-up area within enclosure perimeter
● Compliant with UL 2200 Listed generator sets
● Designed to satisfy all requirements of National Electrical Code installa-
tions
Enclosure Ratings
Standby Prime Dimension (mm) L x W x H Wet Weight Sound Levels Fuel Tank
Model without fuel
kVA kVA LxWxH (kg) dBA@1m dBA@7m (L)
C700 D5 706 565 640 512 VTA 28G5 S5L1D-F41 PC3.3-MLD 20ft - HC
C825 D5 825 660 750 600 VTA 28G6 S6L1D-C41 PC3.3-MLD 20ft - HC
C1100 D5B 1132 906 1029 823 KTA38G5 S6L1D-F41 PC3.3-MLD 20ft - HC
C1250 D5A 1250 1000 1125 900 KTA38G9 S6L1D-G41 PC3.3-MLD 20ft - HC
C1675 D5A 1675 1340 1500 1200 KTA50GS8 S7L1D-D41 PC3.3-MLD 40ft - HC
C2000 D5-PB 2063 1650 1875 1500 QSK60G3 S7L1D-G41 PC3.3-MLD 40ft - HC
C2250 D5-PB 2250 1800 2000 1600 QSK60G4 S7L1D-H41 PC3.3-MLD 40ft - HC
C2500 D5A-PB 2500 2000 2250 1800 QSK60G8 S7L1D-J41 PC3.3-MLD 40ft - HC
C2750 D5BE-PB 2750 2200 2500 2000 QSK60G23 S7L1D-K41 PC3.3-MLD 40ft - HC
PowerCommand® Generator Set Controls
The PowerCommand control system is a microprocessor - based genset monitoring, metering and control system
designed to meet the demands of today’s engine driven gensets. The integration of all control functions into a single
control system provides enhanced reliability and performance, compared to conventional genset control systems. These
control systems have been designed and tested to meet the harsh environment in which gensets are typically applied.
Certificates
Suitable for use on gensets that are designed, manufactured, tested and certified to relevant UL, NFPA, ISO, IEC, Mil
Std. and CE standards
Advanced computing to
better understand your fleet
Acumen provides a convenient means of remote
monitoring of generator sets, transfer switches and
the Cummins engine control module (ECM).
Users can monitor remotely their devices from any
PC or Mac computer through the PowerCommand
CloudTM through a web browser or mobile app. See
the PowerCommand Cloud specsheets for additional
information. Multiple users can monitor the power
system equipment simultaneously.
PowerCommand® paralleling systems deliver the flexibility demanded by your complex applications. We use
common control blocks with prototype-tested components. These systems deliver the features and performance
you require and are supported by the industry’s only local paralleling service organisation
Demonstrated Reliability
Compatible with Cummins Power Generation equipment, third-party equipment, sensors and output controls
while offering multiple ways to view data and receive notifcations.
24 - hour mobile service and warranty, available with special tools and service van. Including professional in-house
facilities and test-run before delivery back to customer.
Contact us
Cummins DKSH (Thailand) Limited Cummins Service Center : Wangnoi Cummins Service Center : Leam Chabang
(Head Office) 141/12 Moo1, Tambol Payom 52/47, Tambol Thungsukha, Amphur Sriracha, Chonburi,
2106 Fantree 4 Sukhumvit Rd. Phrakhanong-Tai TICON Logistics park (TPARK Wangnoi) Phaholyothin Road km. 55.5 20230 Thailand
Phrakhanong, Bangkok 10260, Thailand Wangnoi District, Phra-nakorn Sri Ayutthaya, 13173 Thailand Tel : +66 2301 7500
Tel : +66 2301 7500 Tel : +66 2301 7500 Fax : +66 3876 8878
Fax : +66 2333 0947 Fax : +66 3579 9820
Cummins DKSH (Thailand) Limited
ผูน
้ ําเข้าและผูจ
้ ด
ั จําหน่ายอย่างเป็นทางการในประเทศไทย