Professional Documents
Culture Documents
MD Question Bank
MD Question Bank
9) 'Ergonomic is comprise in order to achieve performance and aesthetic' Explain this statement
10) Explain clearly the bearing stress Developed at the area of contact between two members?
11) Explain the difference between the bearing pressure and the contact stress with suitable
examples
12) what are the necessity of theories of failure? Discuss different theories of failures.
1. Design a socket and spigot type of cotter joint to transmit reversible load of 80 KN
2. A knuckle joint is to be design to connect two Mild Steel bars under a tensile load of 100 KN. The
allowable stressesare 70 Mpa in tension, 40 Mpa in shear and 160 Mpa in crushing.
3. A bracket as shown in fig. is welded to column. Determine the size of weld, if the permissible
shear strength of the weld is 80 N/mm2
4. Calculate size of the weld required for an eccentrically loaded weld shown in fig. the allowable
stress in weld is75 N/mm2.
5. Find the diameter of the bolt of the arrangement shown in fig. Assume material of bolt having
Sy=380 N/mm2 and factor of safety = 2.
6. A bracket as shown in fig. is bolted to column. Determine the size of bolts, if the permissible
shear strength of the bolt is 100 N/mm2