Professional Documents
Culture Documents
26 05 29 71 (16071)
26 05 29 71 (16071)
1. General
A. This Section specifies the requirements necessary to furnish and install vibration
control devices, materials, and related items for electrical systems.
B. Furnish and install vibration control devices, materials, and related items. Perform
all work as shown on the Drawings and as specified herein to provide complete
vibration isolation systems in proper working order.
C. This Specification is primarily written around requirements for 60Hz facilities and
applies to all projects as written, unless noted otherwise for 50 Hz facilities.
A. Provide vibration isolators of the appropriate sizes and proper loading to meet the
specified requirements.
A. In the event of a conflict between the Specifications and/or Drawings and the local or
regional regulatory rules/codes/standards, in addition to the applicable codes and/or
standards, the requirements of the more stringent shall prevail.
1.5. Coordination
1.6. Submittals
A. Provide all required submittal data in electronic format on CD or DVD media in the
format indicated below. The following submittal information is required:
2. Products
2.1. General
3. Execution
3.1. Installation
F. All isolation mounts shall be aligned squarely above or below mounting points for
the supported equipment.
End of Section