Professional Documents
Culture Documents
STAAD Parameter Generator Ver 1.1
STAAD Parameter Generator Ver 1.1
file:
1. Save the STAAD file File Graphically i.e. open STAAD file and Click Save button
2.You must give all the RELEASES for the Members.
3.You must give ALL the Supports in STAAD file.
This Excel will Give you DJ1 - DJ2 & LY LZ For Staad File.
Steps:
1. Select the required parameter UNB-UNT-UNL option from the Right Side of this sheet as
per your Code requirements.
2. Just Click the Button "Give Me Staad File".
3. This will open the dialog box where you have to select the STAAD file.
4. DJ1-DJ2-LY-LZ-UNL will be added directly after FINISH command in the STAAD File you
have selected. If you find any errors th
pl send me an email at
Caution: ajay.sarode@petrofac.c
1. DJ1-DJ2-LY-LZ-UNL for Inclined Members in plan will not be listed. or
2. If there are Hangers or Stubs or Cantilevers, then this will not work properly. ajayssarode@gmail.co
3. Check all the parameters Graphically for the correctness.
4. This program is only to minimize our work and will not be 100% correct.
Include UNB
Include UNT
✘ Include UNL