Professional Documents
Culture Documents
Kona 2020 Full Manual
Kona 2020 Full Manual
Kona 2020 Full Manual
Maintenance
(Gamma 1.6 Turbo-GDI).................................................7-16 Battery...................................................................7-35
Explanation of scheduled maintenance items..7-18 For Best Battery Service ..............................................7-36
Engine oil ..............................................................7-21 Battery Recharging ........................................................7-36
Checking the Engine Oil Level ....................................7-21 Reset Features.................................................................7-37
Checking the Engine Oil and Filter.............................7-22
Engine coolant......................................................7-23 7
Checking the Engine Coolant Level............................7-23
Changing Engine Coolant ..............................................7-26
Tires and wheels ..................................................7-38 Light bulbs.............................................................7-69
Tire Care............................................................................7-38 Headlamp, Parking Lamp, Daytime Running Light,
Recommended Cold Tire Inflation Pressures...........7-39 Turn Signal Lamp and Side Marker,
Check Tire Inflation Pressure ......................................7-40 Cornering lamp.................................................................7-69
Tire Rotation.....................................................................7-40 Front fog lamp .................................................................7-74
Wheel Alignment and Tire Balance ............................7-41 Side Repeater Lamp Replacement ..............................7-74
Tire Replacement ............................................................7-42 Rear Combination Light Bulb Replacement ..............7-75
Wheel Replacement ........................................................7-43 High Mounted Stop Lamp Replacement....................7-77
Tire Traction .....................................................................7-43 License Plate Light Bulb Replacement ......................7-78
Tire Maintenance ............................................................7-43 Interior Light Bulb Replacement .................................7-78
Tire Sidewall Labeling ....................................................7-43 Appearance care ..................................................7-80
Tire Terminology and Definitions................................7-47 Exterior Care ....................................................................7-80
All Season Tires...............................................................7-50 Interior Care .....................................................................7-85
Summer Tires ...................................................................7-50 Emission control system .....................................7-88
Snow Tires ........................................................................7-51 Crankcase Emission Control System ..........................7-88
Radial-Ply Tires ...............................................................7-51 Evaporative Emission Control System Including
Low Aspect Ratio Tires..................................................7-51 Onboard Refueling Vapor Recovery (ORVR)............7-88
Fuses......................................................................7-53 Exhaust Emission Control System ..............................7-89
Instrument Panel Fuse Replacement..........................7-54
7 Engine Compartment Panel Fuse Replacement.......7-55
Fuse/Relay Panel Description......................................7-57
ENGINE COMPARTMENT
■ Gamma 1.6 Turbo-GDI
Maintenance
■ Nu 2.0 MPI 7. Engine oil filler cap
8. Windshield washer fluid reservoir
9. Engine coolant reservoir
10. Engine coolant cap
The actual engine compartment in the vehicle may differ from the illustration.
OOS077001/OOS078071N
7-3
Maintenance
MAINTENANCE SERVICES
You should exercise the utmost care Detailed warranty information is pro- NOTICE
to prevent damage to your vehicle vided in your Service Passport.
and injury to yourself whenever per- Repairs and adjustments required as Improper owner maintenance dur-
forming any maintenance or inspec- a result of improper maintenance or ing the warranty period may affect
tion procedures. a lack of required maintenance are warranty coverage. For details, read
We recommend you have your vehi- not covered. the separate Service Passport pro-
cle maintained and repaired by an vided with the vehicle. If you're
authorized HYUNDAI dealer. An unsure about any service or mainte-
authorized HYUNDAI dealer meets Owner Maintenance nance procedure, have it done by an
HYUNDAI's high service quality Precautions authorized HYUNDAI dealer.
standards and receives technical Inadequate, incomplete or insuffi-
support from HYUNDAI in order to cient servicing may result in opera-
provide you with a high level of serv- tional problems with your vehicle that
ice satisfaction. could lead to vehicle damage, an
accident, or personal injury. This
chapter provides instructions only for
Owner's Responsibility the maintenance items that are easy
Maintenance service and record to perform. Several procedures can
retention are the owner's responsibil- be done only by an authorized
ity. HYUNDAI dealer with special tools.
You should retain documents that Your vehicle should not be modified
show proper maintenance has been in any way. Such modifications may
performed on your vehicle in accor- adversely affect the performance,
dance with the scheduled mainte- safety or durability of your vehicle
nance service charts shown on the and may, in addition, violate condi-
following pages. You need this infor- tions of the limited warranties cover-
mation to establish your compliance ing the vehicle.
with the servicing and maintenance
requirements of your vehicle war-
ranties.
7-4
OWNER MAINTENANCE
The following lists are vehicle checks
WARNING • Block the tires (front and and inspections that should be per-
back) to prevent the vehicle formed by the owner or an author-
Performing maintenance work from moving. ized HYUNDAI dealer at the frequen-
on a vehicle can be dangerous. Remove loose clothing or jew- cies indicated to help ensure safe,
If you lack sufficient knowledge elry that can become entan- dependable operation of your vehi-
and experience or the proper gled in moving parts. cle.
tools and equipment to do the • If you must run the engine
work, have it done by an author- Any adverse conditions should be
during maintenance, do so brought to the attention of your deal-
ized HYUNDAI dealer. out doors or in an area with er as soon as possible.
ALWAYS follow these precau- plenty of ventilation.
tions for performing mainte- These Owner Maintenance vehicle
• Keep flames, sparks, or smok- checks are generally not covered by
nance work: ing materials away from the warranties and you may be charged
• Park your vehicle on level battery and fuel-related parts. for labor, parts and lubricants used.
ground, move the shift lever
Maintenance
into the P (Park, for automatic
transmission vehicle) posi-
tion, place the ignition switch
in the LOCK/OFF position.
7-5
Maintenance
Owner Maintenance Schedule While operating your vehicle: • Check the parking brake.
When you stop for fuel: • Note any changes in the sound of • Check for fluid leaks under your
the exhaust or any smell of vehicle (water dripping from the air
• Check the engine oil level.
exhaust fumes in the vehicle. conditioning system during or after
• Check the coolant level in the use is normal).
• Check for vibrations in the steering
engine coolant reservoir.
wheel. Notice if there is any
• Check the windshield washer fluid increased steering effort or loose-
level. At least monthly:
ness in the steering wheel, or
• Check the for low or under-inflated change in its straight-ahead posi- • Check coolant level in the engine
tires. tion. coolant reservoir.
• Notice if your vehicle constantly • Check the operation of all exterior
turns slightly or "pulls" to one side lights, including the brake lights,
WARNING turn signals and hazard warning
when traveling on smooth, level
road. flashers.
Be careful when checking your
engine coolant level when the • When stopping, listen and check • Check the inflation pressures of all
engine is hot. This may result in for unusual sounds, pulling to one tires including the spare for tires
coolant being blown out of the side, increased brake pedal travel that are worn, show uneven wear,
opening and cause serious or "hard-to-push" brake pedal. or are damaged.
burns and other injuries. • If any slipping or changes in the • Check for loose wheel lug nuts.
operation of your transmission
occurs, check the transmission
fluid level.
• Check the automatic transmission/
dual clutch transmission P (Park)
function.
7-6
SCHEDULED MAINTENANCE
At least twice a year: At least once a year: SERVICES
(i.e., every Spring and Autumn) • Clean body and door drain holes. Follow Normal Maintenance Schedule
• Check radiator, heater and air con- • Lubricate door hinges and hood if the vehicle is usually operated where
ditioning hoses for leaks or dam- hinges. none of the following conditions apply.
age. If any of the following conditions apply,
• Lubricate door and hood locks and
• Check windshield washer spray latches. you must follow the Maintenance
and wiper operation. Clean wiper Under Severe Usage Conditions.
• Lubricate door rubber weather
blades with a clean cloth damp- • Repeated short distance driving.
strips.
ened with washer a fluid.
• Lubricate door checker. • Driving in dusty conditions or
• Check headlamp alignment. sandy areas.
• Check the air conditioning system.
• Check muffler, exhaust pipes, • Extensive use of brakes.
shields and clamps. • Inspect and lubricate automatic
transmission linkage and controls. • Driving in areas where salt or other
• Check the seat belts for wear and corrosive materials are used.
• Clean the battery and terminals.
Maintenance
function.
• Check the brake fluid level. • Driving on rough or muddy roads.
• Driving in mountainous areas.
• Extended periods of idling or low
speed operation.
• Driving for a prolonged period in
cold temperatures and/or extreme- 7
ly humid climates.
• More than 50% driving in heavy
city traffic during hot weather
above 32°C (90°F).
For additional information or assis-
tance see your authorized HYUNDAI
dealer.
7-7
Maintenance
7-8
Normal Maintenance Schedule (Nu 2.0 MPI) (CONT)
MAINTENANCE
Months 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180
INTERVALS
MAINTENANCE Km×1,000 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180
ITEM
Clutch (if equipped) and
I I I I I I I I I I I I I I I
brake pedal free play
Disc brakes and pads I I I I I I I I I I I I I I I
Steering gear rack, linkage and boots/
I I I I I I I I I I I I I I I
lower arm ball joint, upper arm ball joint
Driveshaft and boots I I I I I I I I I I I I I I I
Suspension mounting bolts I I I I I I I I I I I I I I I
Maintenance
Air conditioner refrigerant I I I I I I I I I I I I I I I
Air conditioner compressor I I I I I I I I I I I I I I I
Cooling system hoses and connections I I I I I I I I I I I I I I I
Propeller shaft (AWD) I I I I I I I
Exhaust pipe and muffler I I I I I I I I I I I I I I I 7
Automatic transaxle fluid No check, No service required
7-9
Maintenance
NOTICE
After 180,000 km or 180 months continue to follow the prescribed maintenance intervals.
7-10
Maintenance Under Severe Usage Conditions (Nu 2.0 MPI)
The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer
to the chart below for the appropriate maintenance intervals.
I : Inspect and if necessary, adjust, correct, clean or replace.
R : Replace or change.
MAINTENANCE DRIVING
MAINTENANCE ITEM MAINTENANCE INTERVALS
OPERATION CONDITION
A, B, C, D, E, F,
Engine oil and filter R Every 6,000 km or 6 months
G, H, I, J, K
Air cleaner filter R More frequently C, E
Maintenance
A, C, D, E, F,
Automatic transmission fluid R Every 96,000 km
G, H, I, J
Front brake disc/pads, calipers I More frequently C, D, G, H
7-11
Maintenance
MAINTENANCE DRIVING
MAINTENANCE ITEM MAINTENANCE INTERVALS
OPERATION CONDITION
Steering gear box, linkage & boots/
I More frequently C, D, E, F, G, H, I
lower arm ball joint, upper arm ball joint
Drive shafts and boots I More frequently C, D, E, F, G, H, I, J
Climate control air filter
R More frequently C, E
(for evaporator and blower unit)
Propeller shaft (AWD) I More frequently C, D, E, F, G, H, I, J
7-12
Normal Maintenance Schedule (Gamma 1.6 Turbo-GDI)
MAINTENANCE
Months 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180
INTERVALS
MAINTENANCE Km×1,000 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
ITEM
At first, inspect at 96,000 km or 72 months.
Drive belts *1
Thereafter, inspect every 20,000 km or 24 months
Engine oil and engine oil filter R R R R R R R R R R R R R R R
Fuel additives * 2
Add fuel additives every 10,000 km or 12 months
Air cleaner filter I I I R I I I R I I I R I I I
Spark plugs Replace every 70,000 km
Valve clearance *3 Inspect every 90,000 km or 72 months
Maintenance
Rotate tires Rotate tires every 10,000 km
Climate control air filter
Replace every 20,000 km or 12 months
(for evaporate and blower unit)
At first, replace at 192,000 km or 10 years :
Engine coolant
Thereafter, replace every 48,000 km or 24 month 7
Intercooler, in/out hose, air intake hose I I I I I I I I I I I I I I I
I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace or change.
*1 : The drive belt should be replaced when cracks occur or tension is reduced excessively.
*2 : If TOP TIER Detergent Gasoline is not available, one bottle of additive is recommended. Additives are available from your
authorized HYUNDAI dealer along with information on how to use them. Do not mix other additives.
* : Inspect for excessive valve noise and/or engine vibration and adjust if necessary. Have an authorized HYUNDAI dealer per-
3
7-13
Maintenance
7-14
Normal Maintenance Schedule (Gamma 1.6 Turbo-GDI) (CONT)
MAINTENANCE
Months 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180
INTERVALS
MAINTENANCE Km×1,000 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
ITEM
Rear differential oil (AWD) *4 I I I
Transfer case oil (AWD)*4 I I I
Vapor hose, canister,
I I I I I I I
fuel filler cap and fuel tank
Fuel tank air filter *5 I I I I I I I
Fuel filter *5 I I I I I I I
Fuel lines, hoses and
Maintenance
I I I
connections of each part
Parking brake I I I I I I I
Brake fluid I I I I I I I
All latch, hinges and locks I I I I I I I
I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace or change. 7
*4 : Transfer case oil and rear differential oil should be changed anytime they have been submerged in water.
*5 : Fuel filter & Fuel tank air filter are considered to be maintenance free but periodic inspection is recommended for this mainte-
nance schedule depends on fuel quality. If there are some important safety matters like fuel flow restriction, surging, loss of
power, hard starting problem, etc. replace the fuel filter immediately regardless of maintenance schedule and consult an
authorized HYUNDAI dealer for details.
NOTICE
After 150,000 km or 180 months continue to follow the prescribed maintenance intervals.
7-15
Maintenance
7-16
MAINTENANCE DRIVING
MAINTENANCE ITEM MAINTENANCE INTERVALS
OPERATION CONDITION
Steering gear box, linkage & boots/
I More frequently C, D, E, F, G, H, I
lower arm ball joint, upper arm ball joint
Drive shafts and boots I More frequently C, D, E, F, G, H, I, J
Climate control air filter
R More frequently C, E
(for evaporator and blower unit)
Propeller shaft (AWD) I More frequently C, D, E, F, G, H, I, J
Maintenance
Severe Driving Conditions
A - Repeatedly driving short distances of less than 8 km in nor- E - Driving in sandy areas
mal temperature or less than 16 km in freezing temperature F - Driving in heavy traffic area over 32°C (90°F)
B - Extensive engine idling or low speed driving for long dis- G- Driving on uphill, downhill, or mountain road
tances H- Towing a Trailer, or using a camper, or roof rack
7
C- Driving on rough, dusty, muddy, unpaved, graveled or salt- I - Driving as a patrol car, taxi, other commercial use or vehicle
spread roads towing
D- Driving in areas using salt or other corrosive materials or in J - Driving over 170 km/h (106 mph)
very cold weather K - Frequently driving in stop-and-go conditions
7-17
Maintenance
Maintenance
hoses and connections for leakage
and damage. Replace any damaged As the vehicle is driven, the auto- fluid according to the maintenance
parts. matic transmission fluid will begin schedule.
to look darker. This is a normal
condition and you should not
Engine Coolant judge the need to replace the fluid
The coolant should be changed at based upon the changed color. 7
the intervals specified in the mainte-
nance schedule.
7-19
Maintenance
Brake Hoses and Lines Exhaust Pipe and Muffler Drive Shafts and Boots
Visually check for proper installation, Visually inspect the exhaust pipes, Check the drive shafts, boots and
chafing, cracks, deterioration and muffler and hangers for cracks, dete- clamps for cracks, deterioration, or
any leakage. Replace any deteriorat- rioration, or damage. Start the engine damage. Replace any damaged
ed or damaged parts immediately. and listen carefully for any exhaust parts and, if necessary, repack the
gas leakage. Tighten connections or grease.
replace parts as necessary.
Brake Fluid
Check the brake fluid level in the Air Conditioning Refrigerant
brake fluid reservoir. The level should Suspension Mounting Bolts Check the air conditioning lines and
be between the MIN and the MAX Check the suspension connections connections for leakage and dam-
marks on the side of the reservoir. for looseness or damage. Retighten age.
Use only hydraulic brake fluid con- to the specified torque.
forming to DOT 3 or DOT 4 specifi-
cation.
Steering Gear Box, Linkage &
Boots/Lower Arm Ball Joint
Parking Brake With the vehicle stopped and the
Inspect the parking brake system engine off, check for excessive free-
including the parking brake pedal play in the steering wheel. Check the
and cables. linkage for bends or damage. Check
the dust boots and ball joints for
deterioration, cracks, or damage.
Brake Discs, Pads, Calipers
and Rotors Replace any damaged parts.
Check the pads for excessive wear,
discs for run out and wear, and
calipers for fluid leakage.
7-20
ENGINE OIL
Checking the Engine Oil Level ■ 1.6 Turbo-GDI
Maintenance
5. Pull the dipstick out, wipe it clean, be between F and L.
and re-insert it fully.
OOS077005N
7. If it is near or at L, add enough oil
to bring the level to F.
7-22
ENGINE COOLANT
The high-pressure cooling system Checking the Engine Coolant The coolant level should be filled
has a reservoir filled with year-round Level between the F and the L marks on
antifreeze coolant. The reservoir is the side of the coolant reservoir
■ 1.6 Turbo-GDI
filled at the factory. when the engine is cool.
Check the antifreeze protection and If the coolant level is low, add enough
coolant level at least once a year, at distilled (deionized) water to bring the
the beginning of the winter season level to the F mark, but do not overfill.
and before traveling to a colder cli- If frequent additions are required, see
mate. an authorized HYUNDAI dealer for a
cooling system inspection.
Maintenance
■ 2.0 MPI vehicle and never mix hard water in
the coolant filled at the factory.
• An improper coolant mixture can
result in severe malfunction or
engine damage.
• The engine in your vehicle has alu- 7
minum engine parts and must be
protected by an ethylene-glycol
with phosphate based coolant to
prevent corrosion and freezing.
• Do not use alcohol or methanol
OOS077076N
coolant or mix them with the spec-
Check the condition and connections ified coolant.
of all cooling system hoses and
heater hoses. Replace any swollen
or deteriorated hoses.
7-23
Maintenance
i Information OTL075062
If in doubt about the mix ratio, a 50%
water and 50% antifreeze mix is the 1. Check if the coolant cap label
easiest to mix together as it will be the is straight In front.
same quantity of each. It is suitable to
use for most temperature ranges of
-35°C (-31°F) and higher.
7-24
■ 1.6 Turbo-GDI
WARNING WARNING
Never remove the The electric motor for
engine coolant reser- the cooling fan may
voir tank/radiator cap continue to operate
or the drain plug or start up when the
while the engine and engine is not running
radiator are hot. Hot coolant and can cause serious injury.
and steam may blow out under Keep hands, clothing and tools
pressure, causing serious away from the rotating fan
injury. blades of the cooling fan.
OOS077009
■ 2.0 MPI Turn the engine off and wait
until the engine cools down. The electric motor for the cooling fan
Use extreme care when remov-
Maintenance
is controlled by engine coolant tem-
ing the engine coolant reservoir perature, refrigerant pressure and
tank/radiator cap. Wrap a thick vehicle speed. As the engine coolant
towel around it, and turn it temperature decreases, the electric
counterclockwise slowly to the motor will automatically shut off. This
first stop. Step back while the is a normal condition. If your vehicle
pressure is released from the is equipped with GDI, the electric 7
cooling system. When you are motor for the cooling fan may begin
sure all the pressure has been to operate at any time and continue
released, press down on the to operate until you disconnect the
OOS077077N
cap, using a thick towel, and negative battery cable.
continue turning counterclock-
wise to remove it.
7-25
Maintenance
7-26
BRAKE FLUID
Checking the Brake Fluid If the level is low, add the specified NOTICE
Level brake fluid to the MAX level. The level
will fall with accumulated mileage. • Do not allow brake fluid to con-
This is a normal condition associated tact the vehicle’s body paint, as
with the wear of the brake linings. If paint damage will result.
the fluid level is excessively low, have • Brake fluid, which has been
the brake system checked by an exposed to open air for an
authorized HYUNDAI dealer. extended time should NEVER be
used as its quality cannot be
WARNING guaranteed. It should be dis-
posed of properly.
If the brake system requires fre- • Do not use the wrong kind of
quent additions of fluid this brake fluid. A few drops of min-
could indicate a leak in the eral based oil, such as engine
OOS077011 oil, in your brake system can
Maintenance
brake system. Have the vehicle
Check the fluid level in the reservoir inspected by an authorized damage brake system parts.
periodically. The fluid level should be HYUNDAI dealer.
between MAX and MIN marks on the i Information
side of the reservoir.
WARNING Use only the specified brake fluid
Before removing the reservoir cap (refer to "Recommended Lubricants
and adding brake fluid, clean the and Capacities" in chapter 8).
7
area around the reservoir cap thor- Do not allow brake fluid to come
oughly to prevent brake fluid contam- in contact with your eyes. If
ination. brake fluid comes in contact
with your eyes, flush your eyes
with clean water for at least 15
minutes and get immediate
medical attention.
7-27
Maintenance
7-28
AIR CLEANER
Filter Replacement
OOS077015 OOS077016
OOS077013 1. Loosen the air cleaner cover 3. Replace the air cleaner filter.
attaching clips and open the cover. 4. Lock the cover with the cover
Maintenance
The air cleaner filter can be cleaned 2. Wipe the inside of the air cleaner. attaching clips.
for inspection using compressed air.
5. Check that the cover is firmly
Do not attempt to wash or to rinse it, installed.
as water will damage the filter.
If soiled, the air cleaner filter must be
replaced.
7
7-29
Maintenance
7-30
OOS077017 OOS077019 OPD076026
2. Remove the support rod (1). 3. Remove the climate control air fil- 4. Replace the climate control air fil-
ter case while pressing the lock on ter.
Maintenance
the right side of the cover. 5. Reassemble in the reverse order
of disassembly.
NOTICE
Install a new climate control air fil-
ter in the correct direction with the 7
arrow symbol (↓) facing down-
wards, otherwise, it may be noisy
and the effectiveness of the filter
may be reduced.
7-31
Maintenance
WIPER BLADES
Blade Inspection Blade Replacement Front windshield wiper blade
Contamination of either the windshield When the wipers no longer clean replacement
or the wiper blades with foreign matter adequately, the blades may be worn
can reduce the effectiveness of the or cracked, and require replacement.
windshield wiper functionality.
Common sources of contamination NOTICE
are insects, tree sap, and hot wax
treatments used by some commercial To prevent damage to the wiper
car washes. If the blades are not wip- arms or other components, do not
ing properly, clean both the window attempt to move the wipers manu-
and the blades with a clean cloth ally.
dampened with washer fluid.
NOTICE
NOTICE OLMB073020
The use of a non-specified wiper
To prevent damage to the wiper blade could result in wiper mal- ■ Type A
blades, arms or other compo- function and failure. 1. Put the front windshield wipers
nents, do not: into the service position.
• Use gasoline, kerosene, paint NOTICE 2. Raise the wiper arm and slightly
thinner, or other solvents on or rotate the wiper blade assembly to
near them. • In order to prevent damage to
the hood and the wiper arms, the expose the plastic locking clip.
• Attempt to move the wipers wiper arms should only be lifted
manually. when in the top wiping position. NOTICE
• Use non-specified wiper blades. • Always return the wiper arms to Do not allow the wiper arm to fall
the windshield before driving. against the windshield, since it
i Information may chip or crack the windshield.
Commercial hot waxes applied by auto-
matic car washes have been known to
make the windshield difficult to clean.
7-32
OLMB073021 OLMB073098 OLMB073099
■ Type B
1. Raise the wiper arm.
Maintenance
NOTICE
Do not allow the wiper arm to fall
against the windshield, since it
may chip or crack the windshield.
7
OLMB073022 OLMB073100
3. Press the clip (1) and slide the 2. Lift up the wiper blade clip (1).
blade assembly downward (2). Then pull down the blade assem-
4. Lift it off the arm. bly (2) and remove it.
5. Install the blade assembly in the 3. Install the new blade assembly in
reverse order of removal. the reverse order of removal.
6. Return the wiper arm on the wind- 4. Return the wiper arm on the wind-
shield. shield. 7-33
Maintenance
OTL075051
2. Install the new blade assembly by
OTL075050
inserting the center part into the
slot in the wiper arm until it clicks
1. Raise the wiper arm and pull out into place.
the wiper blade assembly.
3. Make sure the blade assembly is
installed firmly by trying to pull it
slightly.
To prevent damage to the wiper arms
or other components, have the wiper
blades replaced by an authorized
HYUNDAI dealer.
7-34
BATTERY
WARNING Batteries contain sulfu- • NEVER attempt to recharge
ric acid which is highly the battery when the vehicle’s
To prevent SERIOUS INJURY or corrosive. Do not allow battery cables are connected
DEATH to you or bystanders, acid to contact your to the battery.
always follow these precautions eyes, skin or clothing. • The electrical ignition system
when working near or handling If acid gets into your eyes, flush works with high voltage.
the battery: your eyes with clean water for at NEVER touch these compo-
Always read and follow least 15 minutes and get imme- nents with the engine running
instructions carefully diate medical attention. If acid or when the ignition switch is
when handling a battery. gets on your skin, thoroughly in the ON position.
Wear eye protection wash the area. If you feel pain or
designed to protect the a burning sensation, get med-
eyes from acid splashes. ical attention immediately.
• When lifting a plastic-cased
Maintenance
Keep all flames, sparks,
or smoking materials battery, excessive pressure
away from the battery. on the case may cause battery
acid to leak. Lift with a battery
Hydrogen is always pres- carrier or with your hands on
ent in battery cells, is opposite corners.
highly combustible, and
may explode if ignited. • Do not attempt to jump start 7
your vehicle if your battery is
Keep batteries out of frozen.
reach of children.
7-35
Maintenance
7-36
By jump starting Reset Features
• Watch the battery during
charging, and stop or reduce After a jump start from a good bat- The following items may need to be
the charging rate if the battery tery, drive the vehicle for 20-30 min- reset after the battery has been dis-
cells begin boiling violently. utes before it is shutoff. The vehicle charged or the battery has been dis-
may not restart if you shut it off connected. See chapter 3 or 4 for:
• The negative battery cable before the battery had a chance to
must be removed first and • Power Windows
adequately recharge. See "Jump
installed last when the battery Starting" in chapter 6 for more infor- • Trip Computer
is disconnected. Disconnect mation on jump starting procedures. • Climate Control System
the battery charger in the fol-
lowing order: • Clock
(1) Turn off the battery charg- i Information • Audio System
er main switch. An inappropriately disposed • Sunroof
(2) Unhook the negative battery can be harmful to
the environment and human
Maintenance
clamp from the negative
battery terminal. health. Dispose of the bat-
tery according to your local
(3) Unhook the positive clamp law(s) or regulations.
from the positive battery
terminal.
• Always use a genuine
HYUNDAI approved battery 7
when you replace the battery.
7-37
Maintenance
7-38
Recommended Cold Tire
Inflation Pressures WARNING CAUTION
All tire pressures (including the Recommended pressures must • Under-inflation results in
spare) should be checked when the be maintained for the best ride, excessive wear, poor handling
tires are cold. "Cold tires" means the vehicle handling, and minimum and reduced fuel economy.
vehicle has not been driven for at tire wear. Wheel deformation is also
least three hours or has been driven Over-inflation or under-inflation possible. Keep your tire pres-
for less than 1.6 km (one mile). can reduce tire life, adversely sures at the proper levels. If a
Warm tires normally exceed recom- affect vehicle handling, and tire frequently needs refilling,
mended cold tire pressures by 28 to lead to sudden tire failure that have it checked by an author-
41 kPa (4 to 6 psi). Do not release air could result in loss of vehicle ized HYUNDAI dealer.
from warm tires to adjust the pres- control resulting in an accident. • Over-inflation produces a
sure or the tires will be under-inflat- Severe under-inflation can lead harsh ride, excessive wear at
ed. For recommended inflation pres- to severe heat build-up, causing the center of the tire tread,
Maintenance
sure, refer to "Tire and Wheels" in blowouts, tread separation and and a greater possibility of
chapter 8. other tire failures that can result damage from road hazards.
in the loss of vehicle control
resulting in an accident. This
risk is much higher on hot days
and when driving for long peri- 7
ods at high speeds.
7-39
Maintenance
Check Tire Inflation Pressure If you overfill the tire, release air by Tire Rotation
Check your tires, including the spare pushing on the metal stem in the To equalize tread wear, HYUNDAI
tire, once a month or more. center of the tire valve. Recheck the recommends that the tires be rotated
tire pressure with the tire gauge. Be according to the maintenance sched-
sure to put the valve caps back on ule or sooner if irregular wear devel-
How to check the valve stems. Without the valve ops.
Use a good quality tire pressure cap, dirt or moisture could get into
the valve core and cause air leakage. During rotation, check the tires for
gauge to check tire pressure. You correct balance.
can not tell if your tires are properly If a valve cap is missing, install a new
inflated simply by looking at them. one as soon as possible. When rotating tires, check for uneven
Radial tires may look properly inflat- A cold tire means the vehicle has wear and damage. Abnormal wear is
ed when they are under-inflated. been sitting for 3 hours and driven for usually caused by incorrect tire pres-
less than 1.6 km (1 mile) in that 3 sure, improper wheel alignment, out-
Remove the valve cap from the tire of-balance wheels, severe braking or
valve stem. Press the tire gauge firm- hour period.
severe cornering. Look for bumps or
ly onto the valve to get a pressure Allow the tire to cool before measur- bulges in the tread or side of the tire.
measurement. If the cold tire inflation ing the inflation pressure. Always be Replace the tire if you find any of
pressure matches the recommended sure the tire is cold before inflating to these conditions. Replace the tire if
pressure on the tire label located on the recommended pressure. fabric or cord is visible. After rotation,
the driver's side center pillar or in this be sure to bring the front and rear tire
manual. No further adjustment is pressures to specification and check
necessary. If the pressure is low, add lug nut tightness (proper torque is
air until you reach the recommended 11~13 kgf·m [79~94 lbf·ft]).
pressure. Make sure to put the valve
caps back on the valve stems.
Without the valve cap, dirt or mois-
ture could get into the valve core and
cause air leakage. If a valve cap is
missing, install a new one as soon as
possible.
7-40
■ Without a spare tire Wheel Alignment and Tire
i Information
Balance
Tires that are asymmetrical or direc-
tional can only be installed on the The wheels on your vehicle were
wheel in one direction. The outside aligned and balanced carefully at the
and inside of an asymmetrical tire is factory to give you the longest tire life
not easily distinguishable. Pay careful and best overall performance.
attention to the markings on the side- In most cases, you will not need to
walls of the tires, noting the "outside" have your wheels aligned again.
marking and also the rotating direc- However, if you notice unusual tire
tion before installing them on the wear or your vehicle pulling one way
vehicle. or the other, the alignment may need
ODH073802
to be reset.
Disc brake pads should be inspected If you notice your vehicle vibrating
for wear whenever tires are rotated. WARNING
when driving on a smooth road, your
Maintenance
• Do not use the compact spare wheels may need to be rebalanced.
tire for tire rotation.
• Do not mix bias ply and radial NOTICE
ply tires under any circum- Improper wheel weights can dam-
stances. This may cause age your vehicle's aluminum
unusual handling characteris- wheels. Use only approved wheel 7
tics that may cause loss of weights.
vehicle control resulting in an
accident.
7-41
Maintenance
Tire Replacement
WARNING • Tires degrade over time, even
when they are not being used.
Tread wear indicator Regardless of the remaining
To reduce the risk of DEATH or
SERIOUS INJURY: tread, HYUNDAI recommends
• Replace tires that are worn, that tires be replaced after six
show uneven wear, or are (6) years of normal service.
damaged. Worn tires can • When replacing tires (or
cause loss of braking effec- wheels), it is recommended to
tiveness, steering control, and replace the two front or two
traction. rear tires (or wheels) as a pair.
• Always replace tires with the Replacing just one tire can
same size as each tire that seriously affect your vehicle's
OLMB073027 was originally supplied with handling. If only replacing one
this vehicle. Using tires and pair of tires, it is recommend-
If the tire is worn evenly, a tread wear ed to install the pair of new
indicator will appear as a solid band wheels other than the recom-
mended sizes could cause tires on the rear axle.
across the tread. This shows there is
less than 1.6 mm (2/32 inch) of tread unusual handling characteris- • Heat caused by hot climates
left on the tire. Replace the tire when tics, poor vehicle control, or or frequent high loading con-
this happens. negatively affect your vehi- ditions can accelerate the
cle's Anti-Lock Brake System aging process. Failure to fol-
Do not wait for the tread surface to low this warning may cause
(ABS) resulting in a serious
become level with the tread wear sudden tire failure, which
accident.
indicators before replacing the tire. could lead to a loss of vehicle
control resulting in an acci-
dent.
7-42
Compact spare tire replacement Wheel Replacement Tire Maintenance
A compact spare tire has a shorter When replacing the metal wheels for In addition to proper inflation, correct
tread life than a regular size tire. any reason, make sure the new wheel alignment helps to decrease
Replace it when you can see the wheels are equivalent to the original tire wear. If you find a tire is worn
tread wear indicator bars on the tire. factory units in diameter, rim width unevenly, have your dealer check the
The replacement compact spare tire and offset. wheel alignment.
should be the same size and design When you have new tires installed,
tire as the one provided with your make sure they are balanced. This
new vehicle and should be mounted Tire Traction
will increase vehicle ride comfort and
on the same compact spare tire Tire traction can be reduced if you tire life. Additionally, a tire should
wheel. The compact spare tire is not drive on worn tires, tires that are always be rebalanced if it is removed
designed to be mounted on a regular improperly inflated or on slippery from the wheel.
size wheel, and the compact spare road surfaces. Tires should be
tire wheel is not designed for mount- replaced when the tread depth is at
ing a regular size tire. Tire Sidewall Labeling
Maintenance
least 1.6 mm (2/32 inch). To reduce
the possibility of losing control, slow This information identifies and
WARNING down whenever there is rain, snow or describes the fundamental charac-
ice on the road. teristics of the tire and also provides
The original tire should be the tire identification number (TIN)
repaired or replaced as soon as for safety standard certification. The
possible to avoid failure of the TIN can be used to identify the tire in 7
spare and loss of vehicle con- case of a recall.
trol resulting in an accident. The
compact spare tire is for emer-
gency use only. Do not operate
your vehicle over 80 km/h (50
mph) when using the compact
spare tire.
7-43
Maintenance
7-44
Tire speed ratings 3. Checking tire life (TIN : Tire 4. Tire ply composition and
The chart below lists many of the dif- Identification Number) material
ferent speed ratings currently being Any tires that are over six years old, The number of layers or plies of rub-
used for passenger vehicle tires. The based on the manufacturing date, ber-coated fabric in the tire. Tire
speed rating is part of the tire size (including the spare tire) should be manufacturers also must indicate the
designation on the sidewall of the replaced by new ones. You can find materials in the tire, which include
tire. This symbol corresponds to that the manufacturing date on the tire steel, nylon, polyester, and others.
tire’s designed maximum safe oper- sidewall (possibly on the inside of the The letter "R" means radial ply con-
ating speed. wheel), displaying the DOT Code. struction; the letter "D" means diago-
The DOT Code is a series of num- nal or bias ply construction; and the
Speed bers on a tire consisting of numbers letter "B" means belted-bias ply con-
Rating Maximum Speed and English letters. The manufactur- struction.
Symbol ing date is designated by the last four
S 180 km/h (112 mph) digits (characters) of the DOT code.
5. Maximum permissible infla-
Maintenance
T 190 km/h (118 mph)
tion pressure
H 210 km/h (130 mph) DOT : XXXX XXXX OOOO This number is the greatest amount
V 240 km/h (149 mph)
of air pressure that should be put in
W 270 km/h (168 mph) the tire. Do not exceed the maximum
The front part of the DOT shows a
Y 300 km/h (186 mph) permissible inflation pressure. Refer
plant code number, tire size and
tread pattern and the last four num- to the Tire and Loading Information 7
bers indicate week and year manu- label for recommended inflation
factured. pressure.
For example:
DOT XXXX XXXX 1419 represents
that the tire was produced in the 14th
week of 2019.
7-45
Maintenance
7-46
Temperature - A, B & C Tire Terminology and
The temperature grades are A (the
WARNING Definitions
highest), B and C representing the The temperature grade for this Air Pressure
tire’s resistance to the generation of tire is established for a tire that
heat and its ability to dissipate heat The amount of air inside the tire
is properly inflated and not pressing outward on the tire. Air
when tested under controlled condi- overloaded. Excessive speed,
tions on a specified indoor laboratory pressure is expressed in kilopascal
under-inflation, over-inflation, (kPa) or pounds per square inch
test wheel. or excessive loading, either (psi).
Sustained high temperature can separately or in combination,
cause the material of the tire to can cause heat build-up and
degenerate and reduce tire life, and possible sudden tire failure. Accessory Weight
excessive temperature can lead to This may cause loss of vehicle This means the combined weight of
sudden tire failure. Grades B and A control resulting in an accident. optional accessories. Some exam-
represent higher levels of perform- ples of optional accessories are
Maintenance
ance on the laboratory test wheel automatic transmission, power
than the minimum required by law. seats, and air conditioning.
Aspect Ratio
The relationship of a tire's height to
its width. 7
Belt
A rubber coated layer of cords that is
located between the plies and the
tread. Cords may be made from steel
or other reinforcing materials.
7-47
Maintenance
7-48
Maximum Load Rating Passenger (P-Metric) tire Recommended Inflation
The load rating for a tire at the maxi- A tire used on passenger cars and Pressure
mum permissible inflation pressure some light duty trucks and multipur- Vehicle manufacturer's recommend-
for that tire. pose vehicles. ed tire inflation pressure as shown
on the tire placard.
Maximum Loaded Vehicle Ply
Weight A layer of rubber-coated parallel Radial Ply Tire
The sum of curb weight; accessory cords. A pneumatic tire in which the ply
weight; vehicle capacity weight; and cords that extend to the beads are
production options weight. laid at 90 degrees to the centerline of
Pneumatic tire the tread.
A mechanical device made of rubber,
Normal Occupant Weight chemicals, fabric and steel or other
The number of occupants a vehicle materials, that, when mounted on an Rim
Maintenance
is designed to seat multiplied by 68 automotive wheel provides the trac- A metal support for a tire and upon
kg (150 pounds). tion and contains the gas or fluid that which the tire beads are seated.
sustains the load.
Occupant Distribution Sidewall
Designated seating positions. Pneumatic options weight The portion of a tire between the
The combined weight of installed tread and the bead. 7
regular production options weighing
Outward Facing Sidewall over 2.3 kg (5 lb.) in excess of the
An asymmetrical tire has a particular standard items which they replace, Speed Rating
side that faces outward when mount- not previously considered in curb An alphanumeric code assigned to a
ed on a vehicle. The outward facing weight or accessory weight, includ- tire indicating the maximum speed at
sidewall bears white lettering or ing heavy duty breaks, ride levelers, which a tire can operate.
bears manufacturer, brand, and/or roof rack, heavy duty battery, and
model name molding that is higher or special trim.
deeper than the same moldings on
the inner facing sidewall.
7-49
Maintenance
7-50
Snow Tires Radial-ply tires have the same load
carrying capacity, as bias-ply or bias WARNING
If you equip your car with snow tires,
they should be the same size and belted tires of the same size, and use
the same recommended inflation Do not mix bias ply and radial
have the same load capacity as the ply tires under any circum-
original tires. Snow tires should be pressure. Mixing of radial-ply tires
with bias-ply or bias belted tires is stances. This may cause unusu-
installed on all four wheels; other- al handling characteristics that
wise, poor handling may result. Snow not recommended. Any combina-
tions of radial-ply and bias-ply or bias may cause loss of vehicle con-
tires should carry 28 kPa (4 psi) trol resulting in an accident.
more air pressure than the pressure belted tires when used on the same
recommended for the standard tires vehicle will seriously deteriorate
on the tire label on the driver's side of vehicle handling. The best rule to fol-
low is: Identical pairs of radial-ply Low Aspect Ratio Tires
the center pillar, or up to the maxi-
mum pressure shown on the tire tires should always be used as a set The aspect ratio is lower than 50 on
sidewall, whichever is less. Do not for the front tires and a set for the low aspect ratio tires.
rear tires.
Maintenance
drive faster than 120 km/h (75 mph) Because low aspect ratio tires are
when your vehicle is equipped with Longer wearing tires can be more optimized for handling and braking,
snow tires. susceptible to irregular tread wear. It their sidewall is a little stiffer than a
is very important to follow the tire standard tire. Also low aspect ratio
rotation interval in this chapter to tires tend to be wider and conse-
Radial-Ply Tires achieve the tread life potential of quently have a greater contact patch
Radial-ply tires provide improved these tires. Cuts and punctures in with the road surface. In some 7
tread life, road hazard resistance and radial-ply tires are repairable only in instances they may generate more
smoother high speed ride. The radi- the tread area, because of sidewall road noise compared with standard
al-ply tires used on this vehicle are of flexing. Consult your tire dealer for tires.
belted construction, and are selected radial-ply tire repairs.
to complement the ride and handling
characteristics of your vehicle.
7-51
Maintenance
CAUTION CAUTION
Because the sidewall of a low • It is not easy to recognize tire
aspect ratio tire is shorter than damage with your own eyes.
a standard tire, the rim of the But if there is the slightest
wheel and the tire itself is more hint of tire damage, have the
easily susceptible to damage. tire checked or replaced
Use caution when driving and because the tire damage may
follow the guidelines below to cause air leakage from the
help minimize damage to the tire.
wheel and tire: • If the tire is damaged by driv-
- When driving on a rough road ing on a rough road, off road,
or off road, drive cautiously pothole, manhole, or curb
because tires and wheels may stone, it will not be covered by
be damaged. And after driving, the warranty.
inspect tires and wheels.
- When passing over a pothole,
speed bump, manhole, or curb
stone, drive slowly so that the
tires and wheels are not dam-
aged.
- If the tire is subjected to a
severe impact, have the tire
and wheel inspected by an
authorized HYUNDAI dealer.
- Inspect the tire condition and
pressure every 3,000 km
(1,800 miles).
7-52
FUSES
■ Blade type A vehicle's electrical system is pro-
tected from electrical overload dam- WARNING
age by fuses.
NEVER replace a fuse with any-
This vehicle has 2 (or 3) fuse panels, thing but another fuse of the
one located in the driver's side panel same rating.
Normal Blown bolster, the other in the engine com-
■ Cartridge type
partment near the battery. • A higher capacity fuse could
cause damage and possibly
If any of your vehicle's lights, acces- cause a fire.
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse • Do not install a wire or alu-
has blown, the element inside the minum foil instead of the
Normal fuse will be melted or broken. proper fuse - even as a tem-
Blown
■ Multi fuse
porary repair. It may cause
If the electrical system does not extensive wiring damage and
work, first check the driver's side possibly a fire.
Maintenance
fuse panel. Before replacing a blown
fuse, turn the engine and all switches
off, and then disconnect the negative NOTICE
battery cable. Always replace a
blown fuse with one of the same rat- Do not use a screwdriver or any
Normal Blown ing. other metal object to remove
If the replacement fuse blows, this fuses because it may cause a 7
indicates an electrical problem. Avoid short circuit and damage the sys-
using the system involved and imme- tem.
diately consult an authorized
HYUNDAI dealer.
Normal Blown
OLF074075
7-53
Maintenance
OOS077026
5. Pull the suspected fuse straight
OOS077028
out. Use the removal tool provided
in the engine compartment fuse
1. Turn the engine off. panel.
2. Turn all other switches OFF. 6. Check the removed fuse; replace it
3. Open the fuse panel cover. if it is blown. Spare fuses are pro-
4. Refer to the label on the inside of vided in the instrument panel fuse
the fuse panel cover to locate the panels (or in the engine compart-
suspected fuse location. ment fuse panel).
7. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized HYUNDAI dealer.
7-54
Fuse switch i Information Engine Compartment Panel
Fuse Replacement
■ Blade type fuse
OOS077027 OOS047142L
Maintenance
If the fuse switch is OFF, the above ■ Cartridge type fuse
ON position.
message will appear.
If you move the switch to the OFF
position, some items such as the NOTICE
audio system and digital clock must
be reset and the smart key may not • Always place the fuse switch in
work properly. the ON position while driving the 7
vehicle.
• Do not move the fuse switch
repeatedly. The fuse switch may
be damaged.
OOS077025
7-55
Maintenance
CAUTION
OOS077022 OOS077023
After checking the fuse box in If the main fuse is blown, it must be If the multi fuse is blown, it must be
the engine compartment secure- removed as follows: removed as follows:
ly close the fuse box cover 1. Turn off the engine. 1. Turn off the engine.
inside the engine compartment, 2. Disconnect the negative battery
until it clicks. 2. Disconnect the negative battery
cable. cable.
If the fuse box is not closed 3. Remove the fuse panel cover by 3. Remove the fuse panel cover by
properly, water may leak in side, pressing the tab and pulling it up. pressing the tab and pulling it up.
possibly causing a malfunction 4. Remove the nuts shown in the pic- 4. Remove the nuts shown in the pic-
with the electrical system. ture above. ture above.
5. Replace the fuse with a new one 5. Replace the fuse with a new one
of the same rating. of the same rating.
6. Reinstall in the reverse order of 6. Reinstall in the reverse order of
removal. removal.
i Information i Information
If the main fuse is blown, consult an If the multi fuse is blown, consult an
authorized HYUNDAI dealer. authorized HYUNDAI dealer.
7-56
Fuse/Relay Panel Description
Instrument panel fuse panel
OOS077028
Maintenance
Inside the fuse/relay box cover, you
can find the fuse/relay label describ-
ing fuse/relay names and ratings.
i Information 7
Not all fuse panel descriptions in this
manual may be applicable to your
vehicle; the information is accurate at OOS077078N
the time of printing. When you inspect
the fuse box on your vehicle, refer to
the fuse box label.
7-57
Maintenance
TAIL GATE
10A Tail Gate Relay
OPEN
P/WINDOW
25A Power Window LH Relay, Driver Safety Power Window Module
LH
P/WINDOW
25A Power Window RH Relay, Passenger Safety Power Window Module
RH
P/SEAT
25A Passenger Seat Manual Switch
(PASS)
Blind-Spot Collision Warning Unit LH/RH, Active Air Flap, BCM, Parking Distance Warning Buzzer,
MODULE 4 7.5A
Lane Keeping Assist Unit (Line), 4WD ECM
POWER
20A ICM Relay Box(Power Outlet Relay)
OUTLET 2
7-58
Instrument panel fuse panel
Fuse Name Fuse Rating Protected Component
INTERIOR Glove Box Lamp, Vanity Lamp LH/RH, Room Lamp, Overhead Console Lamp, Wiresess Charger Unit,
7.5A
LAMP Driver Console Switch, Luggage Lamp
B/ALARM
10A ICM Relay Box(Burglar Alarm Horn Relay)
HORN
MEMORY 10A A/C Control Module, Head Up Display, Instrument Cluster, Electro Chromic Mirror
Maintenance
MDPS 7.5A MDPS Unit
MODULE 1 7.5A Active Air Flap, Ignition key Interlock Switch, BCM, Hazard Switch, Data Link Connector, Rain sensor
MODULE 7 7.5A Front Air Ventilation Seat Module, Front Seat Warmer Module
START 7.5A Transaxle Range Switch(A/T), ECM, ICM Relay Box(Burglar Alarm Relay)
7-59
Maintenance
DOOR LOCK 20A Door Lock Relay, Door Unlock Relay, ICM Relay Box(Two Turn Unlock Relay)
S/HEATER 20A Front Seat Warmer Module, Front Air Ventilation Seat Module
A/C 2 20A A/C Control Module, Blower Motor, Blower Resistor, E/R Junction Block (Blower Relay)
A/C 1 7.5A A/C Control Module, E/R Junction Block(PTC Heater #2 Relay, Blower Relay, PTC Heater #1 Relay)
AIR BAG 15A SRS Control Module, Passenger Occupant Detection Sensor
Wiresess Charger Unit, Smart Key Control Module, BCM, A/V & Navigation Head Unit,
MODULE2 10A
ICM Relay Box(Power Outlet Relay), Power Outside Mirror Switch, AMP
WIPER
10A BCM, PCB Block (Front Wiper (Low) Relay), Front Wiper Motor
(LO/HI)
7-60
Instrument panel fuse panel
Fuse Name Fuse Rating Protected Component
WIPER FRT 25A Front Wiper Motor, PCB Block(Front Wiper(Low) Relay)
HEATED
10A Driver/Passenger Power Outside Mirror, A/C Control Module, ECM
MIRROR
POWER
20A Cigarette Lighter
OUTLET 1
HEATED
15A BCM
STEERING
Maintenance
7
7-61
Maintenance
OOS077029
i Information
Not all fuse panel descriptions in this
manual may be applicable to your
vehicle; the information is accurate at
the time of printing. When you inspect OOS077079N
the fuse panel in your vehicle, refer to
the fuse panel label.
7-62
Engine compartment fuse panel
Fuse Name Fuse Rating Protected Component
ALT 150A E/R Junction Block (Fuse - ABS 1, ABS 2, 4WD), Alternator
B+5 60A PCB Block ((Fuse - HORN, H/LAMP HI, A/C, ECU 4, ECU 3), Engine Control Relay)
IGPM (Fuse - P/WINDOW LH, P/WINDOW RH, TAIL GATE OPEN, SUNROOF, B/ALARM HORN,
Maintenance
B+4 50A
POWER OUTLET 2, AMP, P/SEAT (PASS),P/SEAT (DRV))
COOLING
60A/50A E/R Junction Block (Cooling Fan #2 Relay, Cooling Fan #1 Relay)
FAN
REAR
40A E/R Junction Block (Rear Defogger Relay)
HEATED
7-63
Maintenance
VACUUM
20A Vacuum Pump
PUMP
B+1 40A IGPM ((Fuse - BRAKE SWITCH, PDM 1, DOOR LOCK, MODULE 1, PDM 2), Leak Current Autocut Device)
7-64
Engine compartment fuse panel
■ GAMMA 1.6L Turbo-GDI
Fuse Name Fuse Rating Protected Component
PCB Block (A/CON Relay), E/R Junction Block (Cooling Fan #1 Relay), Purge Control Solenoid Valve,
SENSOR 2 10A
RCV Control Solenoid Valve, Oil Control Valve #1~#2, Canister Close Valve
INJECTOR 15A -
Maintenance
IGN COIL 20A Ignition Coil #1~#4
7-65
Maintenance
ECU 2 10A -
7-66
Fuse Name Fuse Rating Protected Component
SENSOR 4 15A -
Maintenance
ECU 4 15A PCM
7-67
Maintenance
OOS077035
Inside the fuse/relay box cover, you
can find the fuse/relay label describ-
ing fuse/relay names and ratings.
i Information
Not all fuse panel descriptions in this
manual may be applicable to your OPD076065
vehicle; the information is accurate at
the time of printing. When you inspect NOTICE
the fuse panel in your vehicle, refer to After checking the fuse panel in the engine compartment, securely
the fuse panel label. install the cover. If it is not securely latched, electrical failure may occur
from water contact.
7-68
LIGHT BULBS
Consult an authorized HYUNDAI Headlamp, Position lamp,
dealer to replace most vehicle light WARNING Daytime Running Light, Turn
bulbs. It is difficult to replace vehicle signal lamp, Cornering lamp
light bulbs because other parts of the • Prior to replacing a lamp, and Side marker
vehicle must be removed before you depress the foot brake, move
can get to the bulb. This is especially the shift lever into P (Park) Type A
true for removing the headlamp apply the parking brake, place
assembly to get to the bulb(s). the ignition switch to the
LOCK/OFF position, and take
Removing/installing the headlamp
the key with you when leaving
assembly can result in damage to
the vehicle to avoid sudden
the vehicle.
movement of the vehicle and
to prevent possible electric
i Information shock.
The headlamp and tail lamp lenses • Be aware the bulbs may be
Maintenance
could appear frosty if the vehicle is hot and may burn your fin-
washed after driving or the vehicle is gers.
driven at night in wet weather. This
OOS077033N
condition is caused by temperature
difference between the lamp inside (1) Headlamp (Low)
and outside and, it does not indicate a (2) Headlamp (High)
problem with your vehicle. When 7
(3) Daytime running light (if equipped)
moisture condenses in the lamp, it will /Position lamp
be removed after driving with the
headlamp on. The removable level (4) Turn signal lamp
may differ depending on lamp size, (5) Front fog lamp (if equipped)
lamp position and environmental con- (6) Side marker
dition. However, if moisture is not (7) Side reflex reflector
removed, we recommend that your
vehicle is inspected by an authorized
HYUNDAI dealer.
7-69
Maintenance
7-70
5. Remove the bulb from the head- 5. Install a new bulb by inserting it
lamp assembly. into the socket and rotating it until
6. Install a new headlamp bulb and it locks into place.
snap the headlamp bulb retaining 6. Install the socket in the assembly
wire into position by aligning the by aligning the tabs on the socket
wire with the groove on the bulb. with the slots in the assembly.
7. Connect the headlamp bulb sock- 7. Push the socket into the assembly
et-connector. and turn the socket clockwise.
8. Install the headlamp bulb cover by
turning it clockwise. Position lamp and daytime running
OOS077038 light
i Information Turn signal Your vehicle is equipped with LED
The headlamp aiming should be lamps. LED lamps do not have
1. Open the hood.
Maintenance
adjusted after an accident or after the replaceable bulbs. If the LED lamp
2. Disconnect the negative battery does not operate, have the vehicle
headlamp assembly is reinstalled at an
cable. checked by an authorized HYUNDAI
authorized HYUNDAI dealer.
3. Remove the socket (1) from the dealer.
assembly by turning the socket
counterclockwise until the tabs on Side marker
the socket align with the slots on
If the light bulb does not operate,
7
the assembly.
have the vehicle checked by an
4. Remove the bulb from the socket authorized HYUNDAI dealer.
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
7-71
Maintenance
7-72
5. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
6. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
7. Push the socket into the assembly
and turn the socket clockwise.
OOS077037 OOS077038
Cornering Lamp Turn signal
1. Open the hood. 1. Open the hood.
Maintenance
2. Disconnect the negative battery 2. Disconnect the negative battery
cable. cable.
3. Remove the socket from the 3. Remove the socket (1) from the
assembly by turning the socket assembly by turning the socket
counterclockwise until the tabs on counterclockwise until the tabs on
the socket align with the slots on the socket align with the slots on 7
the assembly. the assembly.
4. Remove the bulb from the socket 4. Remove the bulb from the socket
by pressing it in and rotating it by pressing it in and rotating it
counterclockwise until the tabs on counterclockwise until the tabs on
the bulb align with the slots in the the bulb align with the slots in the
socket. socket. Pull the bulb out of the
Pull the bulb out of the socket. socket.
7-73
Maintenance
5. Install a new bulb by inserting it Front fog lamp (if equipped) 5. Install a new bulb-socket into the
into the socket and rotating it until housing by aligning the tabs on the
it locks into place. socket with the slots in the housing.
6. Install the socket in the assembly Push the socket into the housing
by aligning the tabs on the socket and turn the socket clockwise.
with the slots in the assembly.
7. Push the socket into the assembly Side Repeater Lamp
and turn the socket clockwise. Replacement
7-74
Rear Combination Light Bulb (3) Turn signal lamp
Replacement (4) Backup lamp
■ Type A (Standard) (5) Side marker
OOS077066L
Stop/Tail lamp
OOS077040N 1. Open the tailgate.
Maintenance
■ Type B (LED) 2. Open the lamp assembly retaining
screw covers.
3. Loosen the lamp assembly retain-
ing screws with a cross-tip screw-
driver.
7
OOS078041N
8. Install the socket into the assem- 4. Remove the socket from the
bly by aligning the tabs on the assembly by turning the socket
socket with the slots in the assem- counterclockwise until the tabs on
bly. Push the socket into the the socket align with the slots on
assembly and turn the socket the assembly.
clockwise. 5. Remove the bulb from the socket
9. Reinstall the lamp assembly to the by pressing it in and rotating it
body of the vehicle. counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
OOS077068L 6. Insert a new bulb by inserting it
4. Remove the rear combination into the socket and rotating it until
lamp assembly from the body of it locks into place.
the vehicle. 7. Install the socket into the assem-
5. Remove the socket from the bly by aligning the tabs on the
assembly by turning the socket socket with the slots in the assem-
counterclockwise until the tabs on bly. Push the socket into the
the socket align with the slots on assembly and turn the socket
the assembly. clockwise.
6. Remove the bulb from the socket OOS077069L
8. Reinstall the lamp assembly to the
by pressing it in and rotating it body of the vehicle.
counterclockwise until the tabs on Tail lamp (Type A)
the bulb align with the slots in the 1. Turn off the engine.
socket. Pull the bulb out of the 2. Open the tailgate.
socket. 3. Remove the service cover using a
7. Insert a new bulb by inserting it flat-blade screwdriver.
into the socket and rotating it until
it locks into place.
7-76
Tail / Stop lamp (Type B) High Mounted Stop Lamp 7. Remove the high mounted stop
Your vehicle is equipped with LED Replacement lamp after removing the mounting
lamps. LED lamps do not have nuts.
replaceable bulbs. If the LED lamp 8. Install a new lamp
does not operate, have the vehicle 9. Reinstall the rear spoiler and the
checked by an authorized HYUNDAi tailgate upper trim in the reverse
dealer. order.
OOS077042
Maintenance
Side marker
Your vehicle is equipped with LED 1. Open the tailgate.
lamps. LED lamps do not have 2. Gently remove the cover of the
replaceable bulbs. If the LED lamp tailgate trim.
does not operate, have the vehicle 3. Remove the spoiler plug hole.
checked by an authorized HYUNDAI 4. Disconnect the connector and
dealer. 7
remove the washer hose and the
plug holes.
5. Remove the mounting nuts.
6. Remove the rear spoiler assembly.
7-77
Maintenance
OOS077043
OOS077044 OOS077045
7-78
■ Vanity mirror lamp ■ Glove box lamp 3. Install a new bulb in the socket.
4. Align the lens tabs with the interi-
or lamp housing notches and snap
the lens into place.
NOTICE
Use care not to dirty or damage
lens, lens tab, and plastic hous-
ings.
OOS077046 OOS077047
■ Luggage compartment lamp 1. Using a flat-blade screwdriver,
gently pry the lens from the interi-
Maintenance
or lamp housing.
2. Remove the bulb by pulling it
straight out.
WARNING
7
Prior to working on the Interior
Lights, ensure that the "OFF"
OOS077045
button is depressed to avoid
burning your fingers or receiv-
ing an electric shock.
7-79
Maintenance
APPEARANCE CARE
Exterior Care Protecting your vehicle's finish
WARNING
Exterior general caution Washing
It is very important to follow the label To help protect your vehicle’s finish After washing the vehicle, test
directions when using any chemical from rust and deterioration, wash it the brakes while driving slowly
cleaner or polish. Read all warning thoroughly and frequently at least to see if they have been affected
and caution statements that appear once a month with lukewarm or cold by water before getting on the
on the label. water. road. If braking performance is
If you use your vehicle for off-road impaired, dry the brakes by
driving, you should wash it after each applying them lightly while
High-pressure washing maintaining a slow forward
off-road trip. Pay special attention to
• When using high-pressure wash- the removal of any accumulation of speed.
ers, make sure to maintain suffi- salt, dirt, mud, and other foreign
cient distance from the vehicle. materials. Make sure the drain holes
Insufficient clearance or excessive NOTICE
in the lower edges of the doors and
pressure can lead to component rocker panels are kept clear and • Do not use strong soap, chemi-
damage or water penetration. clean. cal detergents or hot water, and
• Do not spray the camera, sensors Insects, tar, tree sap, bird droppings, do not wash the vehicle in direct
or its surrounding area directly with industrial pollution and similar sunlight or when the body of the
a high pressure washer. Shock deposits can damage your vehicle’s vehicle is warm.
applied from high pressure water finish if not removed immediately. • Be careful when washing the
may cause the device to not oper- side windows of your vehicle.
ate normally. Even prompt washing with plain
water may not completely remove all Especially, with high-pressure
• Do not bring the nozzle tip close to these deposits. A mild soap, safe for water, water may leak through
boots (rubber or plastic covers)or use on painted surfaces, should be the windows and wet the interi-
connectors as they may be dam- used. or.
aged if they come into contact with
high pressure water. After washing, rinse the vehicle thor- • To prevent damage to the plastic
oughly with lukewarm or cold water. parts, do not clean with chemi-
• Do not use any high-pressure noz- Do not allow soap to dry on the fin- cal solvents or strong deter-
zles, which induce either one-direct ish. gents.
water stream or water swirling.
7-80
NOTICE Waxing
A good coat of wax provides a barri-
Matte paint finish vehicle
er between your paint and environ-
(if equipped)
mental contamination.
Automatic car wash which uses
Keeping a good coat of wax on your
rotating brushes should not be
vehicle will help protect it.
used as this can damage the sur-
face of your vehicle. A steam Wax the vehicle when water will no
cleaner which washes the vehicle longer bead on the paint.
surface at high temperature may Always wash and dry the vehicle
result the oil to adhere and leave before waxing. Use a good quality
OOS077051 stains that is difficult to remove. liquid or paste wax, and follow the
Use a soft cloth (e.g. microfiber manufacturer’s instructions. Wax all
NOTICE metal trim to protect it and to main-
towel or sponge) when washing
your vehicle and dry with a tain its luster.
Maintenance
• Water washing in the engine
compartment including high microfiber towel. When you hand Removing oil, tar, and similar materi-
pressure water washing may wash your vehicle, you should not als with a spot remover will usually
cause the failure of electrical cir- use a cleaner that finishes with strip the wax from the finish. Be sure
cuits located in the engine com- wax. If the vehicle surface is too to re-wax these areas even if the rest
partment. dirty (sand, dirt, dust, contami- of the vehicle does not yet need wax-
• Never allow water or other liq- nant, etc.), clean the surface with ing. 7
uids to come in contact with water before washing the car.
electrical/electronic compo-
nents inside the vehicle as this
may damage them.
7-81
Maintenance
Maintenance
with water. Also, clean the
wheels after driving on salted The most common causes of corro-
WARNING roads. sion on your vehicle are:
• Do not wash the wheels with • Road salt, dirt and moisture that is
After washing the vehicle, test allowed to accumulate underneath
the brakes while driving slowly high-speed car wash brushes.
the vehicle.
to see if they have been affected • Do not use any cleaners con- 7
by water. If braking performance taining acid or alkaline deter- • Removal of paint or protective
is impaired, dry the brakes by gents. coatings by stones, gravel, abra-
applying them lightly while sion or minor scrapes and dents
maintaining a slow forward which leave unprotected metal
speed. exposed to corrosion.
7-83
Maintenance
High-corrosion areas High temperatures can also acceler- • When cleaning underneath the
If you live in an area where your vehi- ate corrosion of parts that are not vehicle, pay particular attention to
cle is regularly exposed to corrosive properly ventilated so the moisture the components under the fenders
materials, corrosion protection is can be dispersed. For all these rea- and other areas that are hidden
particularly important. Some of the sons, it is particularly important to from view. Do a thorough job; just
common causes of accelerated cor- keep your vehicle clean and free of dampening the accumulated mud
rosion are road salts, dust control mud or accumulations of other mate- rather than washing it away will
chemicals, ocean air and industrial rials. This applies not only to the vis- accelerate corrosion rather than
pollution. ible surfaces but particularly to the prevent it. Water under high pres-
underside of the vehicle. sure and steam are particularly
effective in removing accumulated
Moisture breeds corrosion mud and corrosive materials.
To help prevent corrosion
Moisture creates the conditions in • When cleaning lower door panels,
which corrosion is most likely to Keep your vehicle clean rocker panels and frame members,
occur. For example, corrosion is The best way to prevent corrosion is be sure that drain holes are kept
accelerated by high humidity, partic- to keep your vehicle clean and free open so that moisture can escape
ularly when temperatures are just of corrosive materials. Attention to and not be trapped inside to accel-
above freezing. In such conditions, the underside of the vehicle is partic- erate corrosion.
the corrosive material is kept in con- ularly important.
tact with the car surfaces by moisture
that is slow to evaporate.
• If you live in a high-corrosion area
Mud is particularly corrosive — where road salts are used, near
because it is slow to dry and holds the ocean, areas with industrial
moisture in contact with the vehicle. pollution, acid rain, etc.—, you
Although the mud appears to be dry, should take extra care to prevent
it can still retain the moisture and corrosion. In winter, hose off the
promote corrosion. underside of your vehicle at least
once a month and be sure to clean
the underside thoroughly when
winter is over.
7-84
Keep your garage dry Interior Care Cleaning the upholstery and
Don't park your vehicle in a damp, Interior general precautions interior trim
poorly ventilated garage. This cre- Vinyl (if equipped)
Prevent caustic solutions such as
ates a favorable environment for cor- Remove dust and loose dirt from
perfume and cosmetic oil, from con-
rosion. This is particularly true if you vinyl with a whisk broom or vacuum
tacting the interior parts because
wash your vehicle in the garage or cleaner. Clean vinyl surfaces with a
they may cause damage or discol-
drive it into the garage when it is still vinyl cleaner.
oration. If they do contact the interior
wet or covered with snow, ice or
parts, wipe them off immediately.
mud. Even a heated garage can con-
See the instructions for the proper Fabric (if equipped)
tribute to corrosion unless it is well
way to clean vinyl. Remove dust and loose dirt from fab-
ventilated so moisture is dispersed.
ric with a whisk broom or vacuum
NOTICE cleaner. Clean with a mild soap solu-
Keep paint and trim in good condition tion recommended for upholstery or
Scratches or chips in the finish • Never allow water or other liq- carpets. Remove fresh spots imme-
Maintenance
should be covered with "touch-up" uids to come in contact with diately with a fabric spot cleaner. If
paint as soon as possible to reduce electrical/electronic compo- fresh spots do not receive immediate
the possibility of corrosion. If bare nents inside the vehicle as this attention, the fabric can be stained
metal is showing through, the atten- may damage them. and its color can be affected. Also, its
tion of a qualified body and paint • When cleaning leather products fire-resistant properties can be
shop is recommended. (steering wheel, seats etc.), use reduced if the material is not proper-
neutral detergents or low alco- ly maintained.
7
Bird droppings are highly corrosive
and may damage painted surfaces in hol content solutions. If you use
just a few hours. Always remove bird high alcohol content solutions
NOTICE
droppings as soon as possible. or acid/ alkaline detergents, the
color of the leather may fade or Using anything but recommended
the surface may get stripped off. cleaners and procedures may
affect the fabric's appearance and
fire-resistant properties.
7-85
Maintenance
7-86
• Cleaning the leather seats Cleaning the seat belt webbing Cleaning the interior window
- Remove all contaminations instant- Clean the belt webbing with any mild glass
ly. Refer to instructions below for soap solution recommended for If the interior glass surfaces of the
removal of each contaminant. cleaning upholstery or carpet. Follow vehicle become fogged (that is, cov-
- Cosmetic products (sunscreen, the instructions provided with the ered with an oily, greasy or waxy
foundation, etc.) soap. Do not bleach or re-dye the film), they should be cleaned with
webbing because this may weaken glass cleaner. Follow the directions
Apply cleansing cream on a cloth
the seat belt. on the glass cleaner container.
and wipe the contaminated spot.
Wipe off the cream with a wet cloth
and remove water with a dry cloth. NOTICE
- Beverages (coffee, soft drink, etc.) Do not scrape or scratch the
Apply a small amount of neutral inside of the rear window. This
detergent and wipe until contami- may result in damage to the rear
window defroster grid.
Maintenance
nations do not smear.
- Oil
Remove oil instantly with
absorbable cloth and wipe with
stain remover used only for natural
leather.
- Chewing gum
7
Harden the gum with ice and
remove gradually.
7-87
Maintenance
7-88
Canister 3. Exhaust Emission Control Engine exhaust (carbon monox-
Fuel vapors generated inside the fuel System ide) precautions
tank are absorbed and stored in the The Exhaust Emission Control • Carbon monoxide can be present
onboard canister. When the engine is System is a highly effective system with other exhaust fumes. If you
running, the fuel vapors absorbed in which controls exhaust emissions smell exhaust fumes of any kind in
the canister are drawn into the surge while maintaining good vehicle per- your vehicle, drive with all the win-
tank through the purge control sole- formance. dows fully open. Have your vehicle
noid valve. checked and repaired immediately.
When the engine starts or fails to
start, excessive attempts to restart
Purge Control Solenoid Valve the engine may cause damage to the WARNING
(PCSV) emission system.
Engine exhaust gases contain
The purge control solenoid valve is carbon monoxide (CO). Though
controlled by the Engine Control colorless and odorless, it is
Module (ECM); when the engine
Maintenance
dangerous and could be lethal if
coolant temperature is low during inhaled. Follow the instructions
idling, the PCSV closes so that evap- on this page to avoid CO poi-
orated fuel is not taken into the soning.
engine. After the engine warms-up
during ordinary driving, the PCSV
opens to introduce evaporated fuel to
the engine.
7
7-89
Maintenance
• Do not operate the engine in con- Operating precautions for cat- Your vehicle is equipped with a cat-
fined or closed areas (such as alytic converters (if equipped) alytic converter emission control
garages) any more than what is device.
necessary to move the vehicle in or WARNING To prevent damage to the catalytic
out of the area. converter and to your vehicle, take
• When the vehicle is stopped in an The exhaust system and cat- the following precautions:
open area for more than a short alytic converter are very hot • Use only UNLEADED FUEL for
time with the engine running, during and immediately after gasoline engines.
adjust the ventilation system (as the engine has been running. To
needed) to draw outside air into the • Do not operate the vehicle when
avoid SERIOUS INJURY or there are signs of engine malfunc-
vehicle. DEATH: tion, such as misfire or a noticeable
• Never sit in a parked or stopped • Do not park, idle, or drive the loss of performance.
vehicle for any extended time with vehicle over or near flamma-
the engine running. • Do not misuse or abuse the
ble objects, such as grass, engine. Examples of misuse are
• When the engine stalls or fails to vegetation, paper, leaves, etc. coasting with the engine off and
start, excessive attempts to restart A hot exhaust system can descending steep grades in gear
the engine may cause damage to ignite flammable items under with the engine off.
the emission control system. your vehicle.
• Do not operate the engine at high
• Keep away from the exhaust idle speed for extended periods (5
system and catalytic convert- minutes or more).
er or you may get burned.
• Do not modify or tamper with any
Also, Do not remove the heat part of the engine or emission con-
sink around the exhaust sys- trol system. All inspections and
tem, do not seal the bottom of adjustments must be made by an
the vehicle, and do not coat authorized HYUNDAI dealer.
the vehicle for corrosion con-
trol. It may present a fire risk • Avoid driving with extremely low
under certain conditions. fuel level. If you run out of gasoline,
it could cause the engine to misfire
and result in excessive loading of
the catalytic converter.
7-90