Professional Documents
Culture Documents
6) Clocks
6) Clocks
Technical Manual
CLOCKS
SECTION
Gitiesse
Marine Electronics
Gitiesse S.r.l.
Via Al Ponte Polcevera 8/14
IMCOSTM 3510
16161 Genoa - Italy Stand alone master clock
Tel: +39 – 010 749 2263 / +39 – 010 749 2276 /
+39 – 010 749 2361 fast forward and fast backward with
Fax: +39 – 010 740 21 31 LCD display
E-Mail: gitiesse@gitiesse.com April 2010
Web-Site: www.gitiesse.com
FRONT VIEW
482 mm
SEC
MANUAL MANUAL
8 mm
457 mm
440 mm
134 mm
CUT OUT IN CONSOLE
SIDE VIEW
175 mm REAR PANEL AND TERMINAL STRIP
PROGRAMMING PORT
Description IMCOS 3510 is a digital master clock with LCD display, set-up keyboard and internal microprocessor.
It is suitable for driving electric slave clock network with forward and backward facilities.
It is equipped with 2 output sygnals, 1 for UTC and 1 for LT with accuracy ± 0.2 sec. per months.
Optional features • Larger LCD display showing more information.
• GPS time synchronization.
• Additional outputs for having more than 1 LT adjusting time facility.
Mounting 19” Rack.
Power supply 24 V DC (base stand alone version).
Option 220 V AC
Option Battery Pack.
Standard colour Black 9005.
Weight About 1.5 kg
Dimension 3 unit (19” Rack).
Second
Hand
(RED)
IMCOSTM
Silence
Zones
Mark
Rear
Cable Inlet
Ø 25 mm
Fixing Screw
Cable inlet
Ø 25 mm
3 x Fixing Holes
Ø 4.5 mm
Description * IMCOS 5652 is a forward electric slave clock with 3 hands and silence zones, suitable for ship’s
application.
It can be driven with 30 sec and 0.5 sec polarized pulses by IMCOStm Master Clock.
Mounting Wall mounting
Features * Minute by minute forward facility by IMCOStm Master Clock
Fast forward (standard one hour) facility by IMCOStm Master Clock
Other forward facility maybe available as OPTION
Second adjust switch
Hand driving Minute hand: 30 second leap
Second hand: 0.5 second leap
Illumination No
Wiring Wiring connection: screw terminal fitted inside the body
Cable type: 5 x 1,5 Screened
Cable gland Rear rubber ring for rear cable entry (diameter 25 mm)
Frame Pale Green
IP-norm Front: IP 56
IMCOS TM
175 mm 120 mm
Rear
Cable Inlet
Ø 25 mm
Description * IMCOS 5658 is a forward/backward electric slave clock with 3 hands and illumination, suitable for ship’s
application.
It can be driven with 30 sec and 0.5 sec polarized pulses by IMCOStm Master Clock.
Mounting Console or panel mounting
Features * Minute by minute forward or backward facility by IMCOStm Master Clock
Fast forward or fast backward (standard one hour) facility by IMCOStm Master Clock
Other forward/backward facility maybe available as OPTION
Light adjust dimmer and/or Second adjust switch fitted in optional panel, IMCOS 5650/xx, maybe
available as OPTION
Hand driving Minute hand: 30 second leap
Second hand: 0.5 second leap
Illumination No
Wiring Wiring connection: screw terminal fitted inside the body
Cable type: 5 x 1,5 Screened for clock pulse signal & 2 x 1,5 Screened for 220 V AC for illumination
Cable gland Rear rubber ring for rear cable entry (diameter 25 mm)
Frame Stainless Steel
IP-norm 44
IMCOStm Currently the only system in the world type approved by
five different Classifications Societies.
IMCOStm is an exclusive trademark of Gitiesse
* Gitiesse reserves the right to alter specifications without notice
Gitiesse
Marine Electronics
Gitiesse S.r.l.
Via Al Ponte Polcevera 8/14
IMCOSTM 5650/DS
16161 Genoa - Italy Flush mounting Dimmer Panel
Tel: +39 – 010 749 2263 / +39 – 010 749 2276 /
+39 – 010 749 2361 & push-button
Fax: + 39 – 010 740 21 31 for light adjust in IMCOStm lighted slave clocks
E-Mail: gitiesse@gitiesse.com
Web-Site: www.gitiesse.com
IMCOS 5650
TERMINAL BLOCK
TERMINAL STRIP
G H S1 S2
~
~
80 mm
Terminal Strip
(fixed on the back)
TO CLOCK
220 V AC
90 mm
Description * IMCOS 5650/DS is a flush mounting panel with dimmer for light adjust and push-button for second adjust
for IMCOStm slave clock with illumination.
The panel is supplied with its terminal strip on the back.
Mounting Console or panel mounting.
Wiring Wiring connection: screw terminal fixed on the back.
Cable type: 2 x 1.5 Screened for 220 V AC and 4 x 1.5 Screened for connection to clock light terminals
Material Aluminium.
Colour Standard black, RAL 9005
Protection IP 44
Weight 0.3 Kg
30 mm INTERNAL
TERMINAL
STRIP
Second
Hand
(RED)
IMCOS TM
175 mm 120 mm
Rear
Cable Inlet
Ø 25 mm
120°
Fixing Screw
Ø150 mm
Ø130 mm
3 x Fixing Holes
Ø 4.5 mm Fixing Screw
Cable inlet
CUTOUT Ø 25 mm
IN CONSOLE
Description * IMCOS 5657 is a forward/backward electric slave clock with 3 hands, suitable for ship’s application.
It can be driven with 30 sec and 0.5 sec polarized pulses by IMCOStm Master Clock.
Mounting Console or panel mounting
Features * Minute by minute forward or backward facility by IMCOStm Master Clock
Fast forward or fast backward (standard one hour) facility by IMCOStm Master Clock
Other forward/backward facility maybe available as OPTION
Second adjust switch fitted in optional panel, IMCOS 5650/SEC, maybe available as OPTION
Hand driving Minute hand: 30 second leap
Second hand: 0.5 second leap
Illumination No
Wiring Wiring connection: screw terminal fitted inside the body
Cable type: 5 x 1,5 Screened
Cable gland Rear rubber ring for rear cable entry (diameter 25 mm)
Frame Stainless Steel
IP-norm 44
Second
Adjust
120 mm 90 mm 105 mm
IMCOS 5650
TERMINAL BLOCK
TERMINAL STRIP
S1 S2
80 mm
TO CLOCK
Terminal Strip
(fixed on the back)
90 mm
Description * IMCOS 5650/SEC is a flush mounting panel with push-button for second adjust for IMCOStm slave clock.
The panel is supplied with its terminal strip on the back.
Mounting Console or flush mounting.
Wiring Wiring connection: screw terminal fixed on the back.
2 x 1.5 Screened for connection to clock light terminals.
Material Aluminium.
Colour Standard black, RAL 9005
Protection IP 44
Weight 0.3 Kg
IMCOSTM
Rear
Cable Inlet
Ø 25 mm
120°
REV 30 SEC POLARIZED PULSE
ADV INPUT
DC 24V 12mA
COM
Ø195 mm
Fixing Screw
30 mm
Cable inlet
Ø 25 mm
3 x Fixing Holes
Ø 4.5 mm
Description * IMCOS 5659 is a forward/backward electric slave clock with 2 hands, suitable for ship’s application.
It can be driven with 30 sec polarized pulse by IMCOStm Master Clock.
Mounting Wall mounting
Features * Minute by minute forward or backward facility by IMCOStm Master Clock
Fast forward or fast backward (standard one hour) facility by IMCOStm Master Clock
Other forward/backward facility maybe available as OPTION
Hand driving Minute hand: 30 second leap
Illumination No
Wiring Wiring connection: screw terminal fitted inside the body
Cable type: 3 x 1,5 Screened
Cable gland Rear rubber ring for rear cable entry (diameter 25 mm)
Frame Pale Green
IP-norm Front: IP 56
IMCOSTM
Cable Gland
20C
120°
REV 30 SEC POLARIZED PULSE
ADV INPUT
DC 24V 12mA
COM
3 x Fixing Holes
Ø 4.5 mm
Description * IMCOS 5662 is a forward/backward electric slave clock with 2 hand, suitable for ship’s application.
It can be driven with 30 sec polarized pulse by IMCOStm Master Clock.
Mounting Wall mounting
Features * Minute by minute forward or backward facility by IMCOStm Master Clock
Fast forward or fast backward (standard one hour) facility by IMCOStm Master Clock
Other forward/backward facility maybe available as OPTION
Hand driving Minute hand: 30 second leap
Illumination No
Wiring Wiring connection: screw terminal fitted inside the body
Cable type: 3 x 1,5 Screened
Cable gland 20C
Frame Pale Green
IP-norm 56
INTERNAL
TERMINAL
STRIP
220 mm
Rear
Cable Inlet
Ø 25 mm
Cable inlet
Ø 55 mm
TERMINAL BLOCK
Fixing Screw
3 x Fixing Holes
200 mm Ø 4.5 mm
Description * IMCOS 5666 is a forward/backward electric decorative slave clock with 2 hands, suitable for
ship’s application to be fitted in pax/crew common areas, offices and/or cabins.
It can be driven with 30 sec polarized pulse by IMCOStm Master Clock.
Mounting Wall mounting
Features * Minute by minute forward or backward facility by IMCOStm Master Clock
Fast forward or fast backward (standard one hour) facility by IMCOStm Master Clock
Other forward/backward facility maybe available as OPTION
Hand driving Minute hand: 30 second leap
Illumination No
Wiring Wiring connection: screw terminal fitted inside the body
Cable type: 3 x 1,5 Screened
Cable gland Rear rubber ring for rear cable entry (diameter 25 mm)
Hands and hour-marks Stainless steel
Dial Plywood, walnut finish
IP-norm 22
IMCOSTM
Integrated Multimedia Communication System
Marine Electronics
Genova - Italy
IMCOS 3510 is a digital master clock with LCD display, set-up keyboard and internal microprocessor.
It is suitable for driving electric slave clock network with forward and backward facility.
It is equipped with 2 lines, 1 for UTC and 1 for LT with accuracy ± 0.2 sec. per month, one larger
LCD display for showing more information and serial input for GPS time synchronization.
Front panel.
2
1
5
1. UTC (Universal Time Clock) Slave clock setting and monitor. It is equipped with:
a. 2 “SEC” led alternatively blinking ON/OFF every second
b. UTC “FFWD MANUAL” push button: able to put 1 minute forward UTC slave clock
each time this button is pushed. If button is kept pressed more than three seconds it is
possible to put forward continuously minutes till button is pressed.
c. 2 “STEPS” led alternatively blinking ON/OFF for each minute to be put forward
2. LT (Local Time) Slave clocks setting and monitor. It is equipped with:
a. LT “FFWD MANUAL” and “FBACKWD MANUAL” push buttons: able to put 1 minute
forward or backward LT slave clock each time FFWD or FBACKWD button is pushed. If
button is kept pressed more than three seconds it is possible to put forward or backward
continuously minutes till button is pressed.
b. LT “-1 H (+11 H) AUTO” and “+1 AUTO” push buttons: able to automatically put 1 hour
forward or backward LT slave clock when “-1H” or “+1H” button is pushed.
c. 2 “STEPS” led alternatively blinking ON/OFF for each minute to be put forward or
backward.
3. LCD Display which shows local master clock information and to be used for setting LCD
information. Default page contains the following information:
a. Date
b. UTC time
c. LT time
d. LT offset
4. LCD display setting push buttons:
a. Date setting button
b. UTC time setting button
c. LT time setting button
d. LT offset setting button
5. LCD display light adjustment
2/4
Rear panel and terminal strip.
3/4
Adjusting Time for LT slave clock.
At start-up it necessary to manually adjust LT time in LT clock according to LT information
displayed on LCD Master Clock display.
In order to do that it is necessary to push LT “FFWD MANUAL” and “FBACKWD MANUAL”
push buttons on the front panel of master clock: each time someone push it minute hand will be
forward/backward 1 minute and, if this button is kept pressed more than 3 seconds, it will be
possible to set forward/backward minutes continuously since the button is pushed on.
During this operation the two led named “STEP” will blink alternatively how many minute clock
is to be set forward, and they stop blinking when LT “FFWD MANUAL” or “FBACKWD
MANUAL” push button is released.
It is also possible to adjust LT time with fast forward and fast backward facility by using LT “-1 H
(+11 H) AUTO” and “+1 AUTO” push buttons. When one of these buttons is pushed minute hand
will go 1 hour forward or backward, in this way adjusting LT time becomes faster. Also during
this operation the two led named “STEP” will blink alternatively till minute hand will be stop (one
hour later or before).
4/4