Professional Documents
Culture Documents
AcombaXInstallationGuide_EN
AcombaXInstallationGuide_EN
1. Before starting the installation process, make sure to have the required ID and password to access
the Acomba Forum at http://forum.acomba.com/, as well as the unique identification key that will
be used when installing the server workstation. To obtain this information, contact Customer
Service at 1 800 862-5922.
2. Make sure that the workstation on which the application will be installed has the minimum
requirements. If in doubt, contact Technical Support at 1 800 862-5922.
Processor Intel Core 2 Duo Intel Core 2 Duo Intel Core I5 or higher
RAM
Minimum of 4 GB Minimum of 4 GB 4 GB or more
Available space on
hard disk required to
1 GB 2 GB 2 GB
run Acomba X
Available space on
hard disk required to 2
N/A 250 MB – 10 GB 10 GB
run the database
Operating system3
Vista Vista Windows 7
Partition
NTFS NTFS NTFS
Internet connection
Medium speed Medium speed High speed
The server can be an existing workstation and used for other purposes. It must be permanently open to
access data.
Depending on the volume of transactions.
Supported operating systems: Windows 7, 8, 8.1 and 10, Windows Server 2008 and 2012.
Note: The Terminal Server component is not supported.
4
3. Open the control panel in order to make sure that the user account control is deactivated.
5
7. Access the Acomba Forum at http://forum.acomba.com/.
8. Click Download.
10. Scroll down the page to download the latest version and click Click here.
6
7
Acomba X Standard Installation
1. Double-click the AcombaServer.exe file. The Acomba X Server Setup window indicates the installed
components and those to be installed. In Windows 10, select the AcombaXSetup.exe file and use
the right-click button to select Run as administrator.
Note: Based on the workstation configuration and operating system (if different from Windows 7,
Windows 8 or Windows 10), some of the following components must be installed before installing
Acomba X.
3. Read and accept the terms of the agreement and then click Install. A copy of the agreement can be
printed.
8
4. A message indicates that the Acomba X Server installation is in progress and prompts you to wait.
5. Once the Acomba X Server installation is completed, click Finish. A message is displayed confirming
that the necessary components have been installed and that the installation wizard will be
launched automatically.
6. Click OK.
9
7. Select the Standard Installation option and click Next.
8. In the Unique Identification Key field, enter the unique identification key and click Activate this
license. This key was sent by email. To obtain the unique identification key, please contact
Customer Service at 1 800 862-5922.
9. Once the identification key is activated, click Next. The console configuration starts automatically.
A progress bar indicates the progress and a message is displayed requesting if the client installation
can be performed on the computer.
10
12. Click Install.
13. Wait while Acomba X is installing. Once the installation is completed, the Acomba X Authentication
window is displayed.
14. Enter supervisor as the user name and password and click OK.
11
15. Cliquer sur Installer.
12
Acomba X Customized Installation
Acomba X customized installation is divided into two parts:
Server installation
Client installation
Acomba X server installation is performed only once on the computer used as data server. Acomba X
databases will be created on this computer. To install the client part of Acomba X, refer to the “Client
Installation” section.
The following steps are required to install the “server” part of Acomba X. The “server” part is installed
only once. The installation of the “client” part of Acomba X on the workstations will follow.
Server Installation
1. Double-click the AcombaServer.exe file. The Acomba X Server Setup window indicates the installed
components and those to be installed.
Note:
Based on the workstation configuration and operating system (if different from Windows 7,
Windows 8 or Windows 10), some of the following components must be installed before installing
Acomba X.
13
3. Read and accept the terms of the agreement and then click Install. A copy of the agreement can be
printed. A message indicates that the Acomba X Server installation is in progress and prompts you
to wait.
4. Once the Acomba X server installation is completed, click Finish. A message is displayed confirming
that the necessary components have been installed and that the installation wizard will be
launched automatically.
5. Click OK.
14
6. The Acomba X Installation Wizard window is displayed.
9. In the Unique Identification Key field, enter the unique identification key and click Activate this
license. This key was sent by email. To obtain the unique identification key, contact Customer
Service at 1 800 862-5922.
15
The Specify Acomba X databases window is displayed.
11. If the SQL Acomba X server instance is not installed, click Install. Once the files are extracted, the
SQL Server Installation window is displayed with the installation progress. For a reinstallation,
ignore this step.
12. Click Create to create the BAFSystem database. Then click Create to create the AcombaDemo
database. Click Next.
13. Install the certificate needed to execute the Acomba X “Client” application.
14. Select the type of service to install and then click Install and Start. Please note that using a
Windows service is recommended. This option is selected by default.
16
15. Click Next.
16. Click Apply to Client Package. This step is necessary to prepare installation of the “Client” part of
Acomba X. This step must be redone when installing Acomba X updates.
Note: During an update, the installation wizard starts automatically.
17