Professional Documents
Culture Documents
14 001 7170-6539-6538-DR24 Breakout Low & Spanner Assembly SPL Rev4
14 001 7170-6539-6538-DR24 Breakout Low & Spanner Assembly SPL Rev4
SPANNER ASSEMBLY
Pn’s: 14 001 7170 Breakout assembly
13 001 6539 Spanner
13 001 6538 Rod support
Rev 4.0
When ordering spare parts, please state part number and the quantity.
© Metzke
All rights reserved. No part of this document may be reproduced or trans-
mitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without prior written permission of Metzke.
2/09/14 1.0
15/01/15 2.0
8/3/16 3.0
General Information............................................................8
Application.......................................................................8
Spare Parts.....................................................................8
Statement of Warranty....................................................9
Contact Details................................................................9
Spare Parts Lists...................................................................
14 001 7170 Breakout Low Assembly..........................10
11 001 4997 Breakout Single Unit MB850....................12
10 001 4405 Clamp Cylinder MB850............................14
15 001 7530 Slew Drive w Brake & Shuttle..................16
14 001 7172 Hydraulic Kit MB850 DR Breakout Low...18
13 001 6539 Spanner...................................................20
13 001 6538 Rod Support.............................................22
Application
This breakout unit is designed to be mounted on a drill rig for the use of breaking out
drill pipes and other down the hole equipment. All other uses are considered inap-
propriate.
The manufacturer is not liable for injury and / or damage caused by inappropriate
use.
Spare Parts
Spare parts must comply with requirements determined by Metzke. This is guaran-
teed in case of original spare parts.
Spare parts from other suppliers may, under circumstances change the characteris-
tics of the Breakout Unit and lead to substantial defects, for which Metzke cannot
assume responsibility.
NOTE: Excluded from this warranty are parts that are subject to normal wear and
tear.
Contact Details
This manual was issued with outmost care. However, in case you should need any
further information, please contact: