Professional Documents
Culture Documents
LOADING Material - Structedu
LOADING Material - Structedu
Exploring Potential
LOADING ON BEAMS
WALL LOADS FOR TYPICAL FLOOR
Density of normal bricks = 19.2 kn/m3
( The density of the bricks is based on the type of the bricks, in our case it is Normal common burnt clay
brick for which the density is 19.2 kn/m3, Also the selection of the type of the bricks and the thickness of
the bricks is totally dependent on the Architect )
Brick load per meter height = 0.23 x 19.2 = 4.4 (kn/m)/m height
= 12 kn/m
For 115 mm thick brick walls
Brick load per meter height = 0.115 x 19.2 = 2.2 (kn/m)/m height
= 6.6 kn/m
2.4 m 3m
above )
= 5 kn/m
LOADING ON SLABS
FOR TYPICAL FLOORS
Density of flooring (marbles, tiles etc. ) = 24 kn/m3 (density varied based on the type of the
Let us assume 50mm of Floor finishes on the slab (Generally architect provides us the thickness of the
Total weight of Floor finish load on the slab = 1.2 + 0.12 = 1.32 kn/m2
( Brick coba is the water proofing material generally used on the roof of every building )
Total weight of floor finish load on the roof slab = 2.4 + 0.12 = 2.52 kn/m2