Professional Documents
Culture Documents
Boysen Latex Color Lampblack B-1490
Boysen Latex Color Lampblack B-1490
Boysen Latex Color Lampblack B-1490
* SECTION 1: Identification
· 1.1 Product identifier
· Trade name: B-1490 BOYSEN LATEX COLOR LAMPBLACK
· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.
· Application of the substance / the mixture
Boysen Latex Colors are concentrated acrylic based tinting paints for Boysen Permacoat Latex Paints, Boysen
Healthy Home and Boysen Wallguard Dirt Resisting Latex. They disperse easily and produce tints from pastel to
medium shades with even finishes.
· 1.3 Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Pacific Paint (Boysen) Philippines, Inc.
292 D.Tuazon St., Quezon City
1115 Philippines
· Further information obtainable from: Product safety department
· 1.4 Emergency telephone number:
Telephone Nos. : +63 2 8365 0505 to 09; +63 2 8365 0561 to 64
Facsimile Nos. : +63 2 8367 8878; +63 2 8361-7164; +63 2 8367-8881
Email Address : inquiry@boysen.com.ph
Website Address : www.boysen.com.ph
56.0.3
Page 2/6
Safety Data Sheet
according to GHS
Printing date 23.05.2023 Version number 7 Revision: 23.05.2023
(Contd. of page 1)
CAS: 14807-96-6 Talc (Mg3H2(SiO3)4) 10-25%
EINECS: 238-877-9
CAS: 111-46-6 2,2'-oxybisethanol 2.5%
EINECS: 203-872-2 Acute Tox. 4, H302
CAS: 7732-18-5 water, distilled, conductivity or of similar purity 25-50%
EINECS: 231-791-2
· Additional information: For the wording of the listed hazard phrases refer to section 16.
56.0.3
Page 3/6
Safety Data Sheet
according to GHS
Printing date 23.05.2023 Version number 7 Revision: 23.05.2023
(Contd. of page 2)
Prevent formation of aerosols.
· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles: No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: None.
· 7.3 Specific end use(s) No further relevant information available.
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
(Contd. on page 4)
PH
56.0.3
Page 4/6
Safety Data Sheet
according to GHS
Printing date 23.05.2023 Version number 7 Revision: 23.05.2023
(Contd. of page 3)
· Eye protection: Goggles recommended during refilling
56.0.3
Page 5/6
Safety Data Sheet
according to GHS
Printing date 23.05.2023 Version number 7 Revision: 23.05.2023
(Contd. of page 4)
· 10.4 Conditions to avoid No further relevant information available.
· 10.5 Incompatible materials: No further relevant information available.
· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
56.0.3
Page 6/6
Safety Data Sheet
according to GHS
Printing date 23.05.2023 Version number 7 Revision: 23.05.2023
(Contd. of page 5)
· Directive 2012/18/EU
· Named dangerous substances - ANNEX I None of the ingredients is listed.
· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
26.07.2016
PH
56.0.3